Message merge mapping fail in execution

Hi,
I try to merge two different messages into one with a business process using the merge pattern. When I test the mapping in the integration builder the mapping works. During the runtime I get a mapping error "Cannot produce target element <Target Message Type Root Element>" or it creates a emty result message without any content.
It looks like a timedependency.
Anyone solve a similar problem ?
Regards,
Gerald

Hi,
First test the mapping in the Repository with the input xml from the SXMB_MONI.
Test the N:1 Mapping also in the repository with the Runtime payload.
Did you check the multiline option in the BPM ? Otherwise check it. Also , I hope you have changed the Messages occurence ( Under Mapping->Messages Tab) also in the Interface Mapping..
For more~
Interface Mappings in BPM Collect Pattern
Hope this helps,
Regards,
Moorthy

Similar Messages

RFC Lookup's in message mapping fail with RuntimeException for no reason

Hi guys,
We have developed interfaces that execute a lot of RFC's from Message Mapping, by making use of RFC Lookup API.
In ID, in the corresponding RFC Receiver Communication Channel we have set the number of maximum connections to 100.
However, when a big number of Idocs with lots of items is sent to XI some messages fail in XI because mapping fails with a runtime exception that is not correct, since there is a return value found from the execution of the RFC function. And when I am testing the mapping in Test mode of XI IR, the mapping is executed successfully.
Do you think that by increasing the maximum number of connections in Communication Channel, it will take effect?
Evaggelos

Hi Evaggelos,
DECREASE, may be til 10.
Regards,
Udo

BPM: Messager Merge - Transformation Mapping Problem

Hi,
I tried an eg for time bound message merging (rather adding the items in the message).
I am using a single datatype/message type.
I was able to do the message mapping/interface mapping test by changing the source by making it 0 to unbounded and on the target I have same message type.
This test was successful.I went ahead with the creating the scenario .I used a file adapter for picking up a file. The message monitor shows it is picked it and sent to the bpm.
but the bpm part failed I checked in bpe monitor.It just says the mapping failed(transformation step).prior to which there is a receive step and container operation step which I used it for append the message .these are under a block and this block has a infinite loop for collecting the messages.There is a exception thrower(control step) which is for 2 minutes.this handled by a exception handler.and I guess my file was collected and send to the transformation step after this.but the thing is it never seems to appended since the two files are shown as two seperate error messages in transformation rather than as single ...
Can somebody tell what could be the problem/where to look for the file.
THnks

I am getting more and more sure that the problem is at the block entry only...becoz i checked with direct entry to loop with a counter as loop breaker.it entered the loop and added the lines to the message with multiple lines.and once it hit the counter it came out and did the transformation successfully and sent it to the target system.
when i add the block it fail right at the block entry for the first message after that all the messages show the green flag clicking on pe would show an empty queue...
I guess the only step happening before the block is the correlation key creation i amn't sure if this is giving some problems..
NOW FOR THE BPM Steps....
1.I created the correlation key.
2.I put the block for the block i added the correlation key and exception name.
3.I put the exception branch and the deadline branch
4.on the exception branch i put the name of the exception to be handled.
5. on the deadline branch i put a 2 minute duration
6.within the deadline branch i put the control which throws the exception...
7.i added a loop to the block which is 1 = 1.in that there is a recieve step
8.after that there is container operation which adds the message to the list...
9.followed by outside the block i have a transformation and send steps..
10.the block is in default mode.
I tried creating the scenario completely again and again with different datatype etc to avoid the cache problem + workflow item locked problem...
but no luckk
THNks

Request message mapping failed in QAS server

Hi ,
I've transported the Developed objects from DEV Server to QAS Server using CTS method , now when i m making any changes in the development system and re transporting it back to quality server , its showing one or the other error ,
In one case it shows "Request message mapping failed" just we added one filed and mapped it. The filed can be seen in the repository but in the moni it says this filed is missing even though it is working fine in development, but in quality , i dont know why this problem is coming
The scenario is jdbc -
> xi ---> proxy,
this problem is only is quality , in dev its working fine
pl help , i running short of time ,
rgds
mojib

Ravi,
In test tab , both in message mapping and configuration , its successful but still this error..
rgds
mojib

Error status code 400 with the description Message mapping failed

Hi,
I tried to build RFID outbound scenario using ECC 5.0, XI and AII 2.1.
When I send IDOC message:AIDOPMSG.AIDOP01 from ecc 5.0 to XI(ouput message type is OperationalIn and message mapping is OperationalInTo), i get following error:
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>Message mapping failed</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Message mapping failed</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 400 with the description Message mapping failed Boundary SAP_57D7D47469E09543A1EA0002CBDA0492_END could not be found</SAP:Stack>
I am using standard AUTO-ID 2.1 XI contents. If any of you have encountered such error message, then could you please help me understand the meaning and how to fix it.
thanks in advance,
Ashit

hi Ashit,
take a look at my weblog on how to test your mapping:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
maybe with this you'll be able to find out the error
Regards,
michal

How to know if Message mapping failed?

Hi gurus,
do anyone know how to determine in clean up method if a message mapping failed? i just want to know the status of the message mapping to put it in the trace.
Regards

Thanks for your reply Abhishek,
but this is not exactly what i need.
Suppose following Graphical message mapping: two number A and B need to be divided, A/B. If B equal 0 (zero), this will throw Runtime Exception. In some point of my mapping (maybe at the end of it) i need to catch this Exception, or at least i need to know exception happened. I need to know it to update a table with message mapping status, eg succesfully executed, runtime error, etc.
Regards.

Mapping failing in sxmb_moni

Hi,
I am working on sceanario where the Idoc is coming from ERP system and in PI(which is on unix system), mapping is getting executed. In that mapping i am taking backup of the Idocs. In the Integration Directory i have provided the backup directory name as /usr/sap/put/ABCdefg/IDOC/ . In the integration Repository i have created the parameter as DirectoryName for that maaping and i have binded that parameter in the operation mapping as well. But in sxmb_moni this mapping fails because of the following exception
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RUNTIME_EXCEPTION</SAP:Code>
<SAP:P1>Thrown: java.lang.IllegalArgumentException: The va</SAP:P1>
<SAP:P2>lue for the input paramter DIRECTORYNAME must not</SAP:P2>
<SAP:P3>be null! at com.sap.aii.ib.core.mapping.execution</SAP:P3>
<SAP:P4>.InputParameter.<init>(InputParameter.java:23) a~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during mapping</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detail trace is : <Trace level="1" type="T">The value for the input paramter DIRECTORYNAME must not be null! Thrown: java.lang.IllegalArgumentException: The value for the input paramter DIRECTORYNAME must not be null! at com.sap.aii.ib.core.mapping.execution.InputParameter.<init>(InputParameter.java:23) at com.sap.aii.ib.core.mapping.execution.MappingParameter.newInputParameter(MappingParameter.java:45) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createInputParameter(ParametrizationMap.java:134) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createElement(ParametrizationMap.java:112) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createParametrizations(ParametrizationMap.java:57) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.<init>(ParametrizationMap.java:37) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.newInstance(ParametrizationMap.java:65) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:111) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:72) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy682_10000.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:269) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

DIRECTORYNAME
This parameter is mandatory...or should not be null...check it...if u are using a UDF to assign value to it then check the UDF
Edited by: abhishek salvi on May 14, 2009 12:40 PM

Retrieving SQL error when map failed.

Hi,
Is it possible to retrieve the complete error message when a map failed and send it through email? I don't want to logon to the runtime repository (web browser) each time an error occurs.
Thanks

Hello, I use a query like this to retrieve error messages:
select
x.audit_execution_id task,
x.parent_audit_execution_id father_task,
x.task_name,
x.return_result result,
x.last_update_date update_date,
x.elapse seconds,
round(x.elapse/60,0) minutes,
x.number_of_task_errors err,
x.number_of_task_warnings warn,
err_mess.message
from rt_owner.wb_rt_audit_executions x,
(select m.execution_audit_id, m.message_text message
from RT_OWNER.all_rt_audit_exec_messages m
union all
select r.execution_audit_id, e.run_error_message
from RT_OWNER.all_rt_audit_map_runs r,
RT_OWNER.all_rt_audit_map_run_errors e
where r.map_run_id = e.map_run_id (+)
) err_mess
where
x.audit_execution_id >= (select max (audit_execution_id)
from RT_OWNER.wb_rt_audit_executions
where task_name = 'MY_TASK')
and err_mess.execution_audit_id (+)= x.audit_execution_id
and x.return_result <> 'OK'
order by x.audit_execution_id desc;
The core is the
select m.execution_audit_id, m.message_text message
from RT_OWNER.all_rt_audit_exec_messages m
union all
select r.execution_audit_id, e.run_error_message
from RT_OWNER.all_rt_audit_map_runs r,
RT_OWNER.all_rt_audit_map_run_errors e
where r.map_run_id = e.map_run_id (+)
which retrieves errors occurred during map executions.
If you want to retrieve process errors, you can look at the RAB_RT_EXEC_PROCESS_RUN_ERRORS view.
I wanted this info (and other) through e-mail too. Previously I did it through an External Process. Now I define these special activities directly in Oracle Workflow.
I understand that the next release i.e. Paris will add better support for this?
Hope this helps- Antonio

SAP PI 7.3 AEX Multi mapping: Mapping failed with exception

Hi
I am encountering an issue with the multi mapping in SAP PI 7.3 AEX system.
Requirement for my interface is to pull a single file which has multiple records from the file directory.
Interface need to split the single file to multiple files.
For this I have implemented multi mapping in SAP PI 7.3(Stand alone Java) to split the single file to multiple files just like the way it is done in SAP PI 7.1. Tried this interface in SAP PI 7.1 system and works fine end to end.
I have done the testing in mapping(Test tab) in operational mapping, I could see response is getting generated successfully.
But when testing end to end,
I could see message is getting failed during mapping with the exception "failed to execute: ArrayIndexOutOfBoundsException: 1” .
Note:
Occurrence has been changed to 0..unbounded in the Signature tab of the message mapping & same interface works fine in SAP PI 7.1
Our system is currently on SAP PI 7.31 (AEX) SP05 Patch "0".
Kindly let me know if someone has any idea on this particular exception in SAP PI 7.31 multi mapping Interface.
Thanks & Regards
Ram

Hi Jegathees,
Thanks for your reply.
In PI 7.31:
As we are doing 1:n mapping, I have maintained the source side occurrence as "1" and target side occurrence as "0..unbounded" in the signature tab of message mapping.
Even in PI 7.11 Occurrences were maintained in the same way.
Can you please give me more details of how exactly multimapping in PI 7.31 is different with respect to PI 7.1
Thanks & Regards
Ram

Is it possible to Sending a mail when Mapping fails ?

Hi,
I am using the BPM for my scenario. In that BPM , I am using the message transformation , currently when the mapping fails the entire process stops.
Instead of this I want to send a mail.
Thanks in advance
Chemmanz

Hi Chemmanz,
Sorry for the delailed response. Here is some explaination.
Wrap you transformation step in an exception handler.
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f6/e1283f2bbad036e10000000a114084/content.htm
In the exception handler have a control step - type mail. Here you can specify any custom message.
after the mail control step , you can either exit BPM using control step - type exit or continue with the BPM.
cheers,
naveen
cheers,
Naveen

Flash builder 4.5.1 ios build fails with error map failed

I have built several test app with flash builder 4.5 and now 4.5.1. I am working on an app for ipad, but when I run a test build it runs for several minutes as if it is going to create the ipa, but then error out and displays the following error message:
message title: Problem occured
'Launching [name of configuration] has encountered a problem.
Error occurred while packaging the application:
Map failed
that's it, no other reference. I have searched for any reference to this problem and haven't been able to find one. When I first packaged a much simpler version of the app, it created an ipa just fine.
Can someone help me.
Thanks

When I was try to build a debug iOS version, I got this error, too.(release version is ok)
For the project I was use Flex SDK 4.5.1 and AIR 3 SDK.
blew is the log, I copyed from {flash builder workspace}/.metadata/.log
!STACK 0
java.lang.Exception
          at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1010)
          at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
          at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
          at com.adobe.flexide.multiplatform.ios.packaging.IPAPackager.create(IPAPackager.java:220)
          at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.doPackage(IOSOnDev iceLaunchHandler.java:283)
          at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.launch(IOSOnDevice LaunchHandler.java:181)
          at com.adobe.flexide.launching.multiplatform.MultiPlatformLaunchDelegate.launch(MultiPlatfor mLaunchDelegate.java:180)
          at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:238)
          at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:132)
          at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:853)
          at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:702)
          at org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(DebugUIPlugin.java:923)
          at org.eclipse.debug.internal.ui.DebugUIPlugin$8.run(DebugUIPlugin.java:1126)
          at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
!ENTRY com.adobe.flexbuilder.project 4 43 2011-11-22 22:10:54.816
!MESSAGE Error occurred while packaging the application:
Map failed
even I try to change sdk with FLEX 4.5 and AIR 2.6, the error was still here.
And I try to build debug project in Flash Pro. It was OK.
So I think it was an flashbuilder bug.
My project only 137Megabytes

PO message should get failed for P.grp other than AB1 and AB2

Hello SAP Gurus,
I have a requirement like PO message should get failed for P.grp other than AB1 and AB2.
Detail explanation:
I have a P.grp AB1,AB2,AB3,AB4 etc.... The current process is once PO created and saved the message will be triggered and IDOC is transmitted to the vendor, irrespective of what ever the P.grp.
My requirement is like the PO message should get failed if P.grp is other than AB1 and AB2, and reason should be shown any where in IDOC or in messages.
Pls advice.
Thanks.

Hi Jurgen,
Thanks for the reply...
There are only 5 vendors which is relevant for EDI and P.grp AB1 and AB2 denotes EDI PO, same P.grp mapping has been done in PI also via data ID. The user sometimes selects the P.grp AB3, AB4 etc incorrectly and it goes to the vendor which in-turn again the customer has to amend the PO.
Now I'm planning to include a piece of logic while saving the PO, check if the vendor is EDI vendor then P.grp should be AB1 or AB2, if it is a different P.grp then the system will not allow to save the PO,so that the user will select the relevant P.grp for EDI vendors. Pls let me know your thought and inputs.
Thanks.

Error compiling for IOS "map failed"

Since i have installed Flash Builder 4.6 I allways get an error when I compile for Device "Map Failed".
Compiling for Desktop works fine. When I used Flash Builder 4.5.1 I had sometimes the same problem,
but sometimes compiling worked.
here is the logfile:
!ENTRY com.adobe.flexbuilder.project 4 43 2011-12-07 12:16:06.832
!MESSAGE Map failed
!STACK 0
java.lang.Exception
    at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
    at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
    at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
    at com.adobe.flexide.multiplatform.ios.packaging.IPAPackager.create(IPAPackager.java:276)
    at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.doPackage(IOSOnDev iceLaunchHandler.java:314)
    at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.launch(IOSOnDevice LaunchHandler.java:185)
    at com.adobe.flexide.launching.multiplatform.MultiPlatformLaunchDelegate.launch(MultiPlatfor mLaunchDelegate.java:191)
    at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:244)
    at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:134)
    at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:854)
    at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:703)
    at org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(DebugUIPlugin.java:928)
    at org.eclipse.debug.internal.ui.DebugUIPlugin$8.run(DebugUIPlugin.java:1132)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
!ENTRY com.adobe.flexbuilder.project 4 43 2011-12-07 12:16:07.520
!MESSAGE Fehler beim Verpacken der Anwendung:
Map failed
What can I do ?

I am getting a similar error when exporting a release build for ios.
It seems to be caused by the number of assets I include in the project. If I remove all of the video assets from the package it builds a working release. When the video assets are included, it fails to export the release build with the error "map failed".
So it seems to be the number of assets included or the total size of the included assets that causes the error for me. But I can't find a way around it so can't currently export a release build with all the required assets.
I'm starting to wonder wether I'm going to have to write some kind of "updater" to download all the required assts to the iOS device when the app is first run, which isn't ideal.

Error - Message: update61.map(0)_FILE_NOT_FOUND while mapping update61

Hello!
I tried to install the new patch (update) for my installed Designer 6i.
But the installation failed. I allway got that following ERROR-Message:
"Error - Message: update61.map(0)_FILE_NOT_FOUND while mapping update61"
Whats wrong? What should I do?
Thank you
Uwe

once i faced similiar problem i was installing typical installation then i used custom and installed only the necessary components i needed then it worked ok .

ZID-FBID Mapping Failed error ocurred when trying to send requests to friends in Castleville game on facebook?

A box popped up after I clicked on my friends names who I wanted to send requests to for help in the facebook game Castleville~the entire message inside the box reads as follows:
''''''ZDVIRALMANAGER--ONREQUESTDONE--ERROR!'''''
'''ZID-FBID Mapping Failed.''''

Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.

Message merge mapping fail in execution

Similar Messages

Maybe you are looking for