Message migration problems
Hi.
I messed up when adding contacts to my 1020, I ended up having up to 4 entries for each contact from different sources.
After I removed the unneeded ones, the ones I have left are not tied to my existing messages, meaning that when someone texts me it shows up in a new thread.
I have my old messages synced in Nokia Store (sqlite, NOT a nbu backup ). My 808 is empty now.
Any solution for this?
- I have tried to copy the messages back to the 808, but Nokia Suite can't sync back AFAIK.
- I exported the messages as csv and tried to import them with good old Nokia PC Suite,
but it complains about the format, and besides it doesn't put it in the correct folder.
- Tried to add the contacts in the 1020 again with the same method I added messages, it didn't help.
- Tried to remove contacts in the 1020, and then add incoming numbers as new ones, it didn't work either.
Any help would be greatly appreciated!
After working with Adobe Customer Support, we found that IIS 6 was running in 32-bit mode instead of 64-bit. Once that was discovered, we installed the 32-bit drivers and everything started working. Yea! Here's a link to help determine whether IIS6 is runn 32-bit or 64-bit:
http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/5d306956-b2a2-4 708-9bb9-72a395d474bb.mspx?mfr=true
http://stackoverflow.com/questions/2804040/how-to-check-if-iis-is-in-32bit-or-64bit-mode
Similar Messages
-
Photoshop/Elements to Revel Photo Migration Problem!
What happened to my Photoshop/element photos? They were supposedly migrated, but I don't see them! I have no albums in my Revel account.I had a paid subscriiption and it was cancelled back in or around February, and told that the photos would be moved over to REVEL...Can anyone help me to get them back?
First, thanks Pattie for following up with me. I am going to check my backed up hard drives to see if my photoshop materials are on them. It will take me a few days, as I have only small amounts of time to research it at this time. maybe a break will come in a day or two for a determination.
Date: Mon, 12 Aug 2013 09:45:52 -0700
From: [email protected]
To: [email protected]
Subject: Photoshop/Elements to Revel Photo Migration Problem!
Re: Photoshop/Elements to Revel Photo Migration Problem!
created by Pattie F in Photoshop.com Sharing and Storage - View the full discussion
Michael-
Is it possible you logged into Photoshop.com with a different email, or is it possible that you did not set up your Elements to sync with Photosho.com? These are the two main reasons users can not find their files.
The Photoshop.com account created in 2009 with the email you use to log in to this forum has no files in it, and therefore, nothing migrated to the Revel account with the same login. You do have a Revel account with the same login, but it is also empty since nothing migrated.
Pattie
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5587690#5587690
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5587690#5587690
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5587690#5587690. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop.com Sharing and Storage by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Dear All,
i have one migration problem.
while doing transfer rules migration i got a popup saying that " GJAHR source filed automatic conversion is not possible "
what is this message if continue with that what will happens if not what i should do.hi vsuree,
If u r getting this message for field FISCPER of ur data source,then map Fiscper to 0Fiscyear ,the system wil automatically convert it and the problem will be resolved. hope it will help u.
thanks -
Since upgrading to the latest version of Firefox, I'm now getting the message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." when I try to log onto my internet banking site. This occurs after going thru the first two steps of the login process. I don't get this problem when I login to all my other bookmarked sites, or when I use Internet Explorer. I'm using Windows XP. Any suggestions? (Note: I've just reloaded version 6 of Firefox, but it's not made any difference.)
See here > http://support.apple.com/kb/HT1527
From Here > http://support.apple.com/kb/TS1368
More info here > http://www.apple.com/support/itunes/downloading/ -
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown
HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanksHi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?
Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648) -
Shortly after launching itunes, the program freezes and gives me the following message:A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. The program then closes, even if I have not completed what I am doing. How do I resolve this problem?
That is what I thought. Cannot figure out how to turn it off, though.
However, when I talked to her over the phone, she is definitely using Firefox. I tried to access her Internet Explorer, but it has been deactivated, I believe by Firefox.
She primarily uses the Internet to communicate with her kids, grandkids, and great grandkids. Her e-mail account is with Yahoo Mail, and she uses Firefox to access it. Occasionally, she uses the web to look up information, and may have downloaded a virus.
Do you think there's something in Yahoo Mail that conflicts with Firefox? Is there some remnant of Internet Explorer that needs to be deactivated? Could she have a virus?
Any information would be gratefully appreciated. I live 7 hours away, and can only help her over the phone. I'm trying to develop a course of action that I can use with her. I know a little bit about Firefox, so need your expertise. -
ITunes will not open, no message of problems
iTunes does not show up whenever I click on it, and no message of problems comes onto the screen. Absolutely nothing at all happens. Help?
See if QuickTime will open. iTunes uses QT codecs to play everything.
Sometimes QT will give an error message, where iTunes won't.
Also here is an article with lots more ideas to try:
http://docs.info.apple.com/article.html?artnum=93976 -
I rented a movie (dark shadows) but I can not see it, because a message appear "Problem loading...try again later". Is not a problem connection. I tried a lot of times to watch the movie and I didn't can.
Thanks
CelesteI rented a movie (The Hobbit)...but it stops loading.
The movie costs CHF 7.50.
A phone call to the support team costs CHF 46.-- !!!!!
What do you think I will do?
Pisella Verde -
RFC Message: Internal Problem, in REDWOOD CPS.
We have Redwood CPS 7 connected up to SAP IS-U Supply.
We keep getting random RFC errors when executing a script.
Any Idea
ERROR LOG *******************
ABAP_RUN: R/3 call BAPI_XBP_JOB_OPEN failed
RFC error: XM034
RFC Message: Internal problem (function BAPI_XBP_JOB_OPEN)
TCTRETURNS/ : deleted
/ERROR LOG *******************Hi,
if this is a random issue I assume that the authorizations of the CPS communication user are OK, otherwise please verify:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/bb35b8623a489aa63abd9f5ebf2448/frameset.htm
If this random issue happens only if you execute your custom script, I would assume that the script wants to create a job with invalid data. For example: some data is missing or wrong like start date/time, job class, job user, job name.
Let's analyze what you have posted here:
RFC error: XM034
RFC Message: Internal problem (function BAPI_XBP_JOB_OPEN)
-> XM034 point to the XMI log
-> use transcation RZ15 to analyze the XMI log
-> XM034 means "problem detected" (see appendix 8 of document ftp://ftp.sap.com/pub/icc/bc-xbp/BCXBPDOC70V3.pdf)
I locked into the code and indeed it seems that function BAPI_XBP_JOB_OPEN returns this message if the job cannot be created.
So if Sys- and XMI-Log cannot help you in solving this issue, I would create a message for dev. support.
Cheers,
Martin
http://service.sap.com/jsm -
I have changed my PC, deactivated Adobe Acrobat and tried to load on new PC. Got to registration and get the message " A problem was encountered while trying to send information over internet" this is 8 standard
When I try to use it to make pdf files I get the message "Missing PDFMaker files
It is a proper copy with serial numbersMoving this discussion to the Acrobat Installation & Update Issues forum.
-
My dreamweaver cs5.5 on window 7started working stop showing message A problem caused programe to
my dreamweaver cs5.5 on window 7started working stop showing message A problem caused programe to stop work correctly
What's the error message you received?
What do your logs tell you?
What were you doing just before you got the error message?
Nancy O. -
Hello when i upgrade from 4 to 4S will my existing text messages migrate over?
HI when i upgrade from iPhone 4 to iPhone 4S will my existing text messages migrate.....
If you back up your iphone 4, and when you get the iphone 4S, you would have to restore from back up and you will have all your existing text messages. If you set your iphone 4S as a "New Phone" then it will start from fresh and no existing text message will be in there
-
Getting a message, "A problem has stopped PS Elements from working correctly."
I just installed PSE11 on my new Windows 8 computer. (I had previously run it on my old computer with Windows 7). The icon flickers when I open PSE11 and then I get a message, "A problem has stopped Photoshop Elements from working correctly. Windows will notify you if there is a solution to the problem." I never get a notification about a solution. Any ideas?
Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows
Maybe you are looking for
-
Boot camp Windows 8.1 new rMBP / Mavericks
So, my shiny new 13" retina MBP (first Mac product) arrived Thursday and I decided yesterday would be the day I'd Bootcamp Windows 8.1. I had a plethora of issues, some of which I got through by mining the interweb for info, but one stumped me altoge
-
Problem Flash Builder and Blazeds
Hi I'm trying to create a project in flash builder 4. I created it and set up this site as http://sujitreddyg.wordpress.com/2009/04/07/setting-up-blazeds/. I am still in doubt of how to do that with Blazeds connect with my J2EE application. When I c
-
Date format for Task Predicate Query
Does anyone know the correct format the task query is expecting when testing against flex field data e.g. dateAttribute1? I the following query -> <tas1:taskListRequest xmlns:com="http://xmlns.oracle.com/bpel/workflow/common" xmlns:tas="http://xmlns.
-
The error message when I add a bookmark
When I add a bookmark, a window appears with the message: unload: [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIObserverService.removeObserver]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chro
-
Fpga crio mysterious activity in program
Hello, i have the following problem, my crio 9076 (Slot 1 9411, Slot 2 9474) does mysterious things when running the fpga code every ~108 seconds the hardwar givs an peak at DO 02 from the 9474, it look like the hardware reset the code maby someone h