Message monitor - IDOCs messages

Hi
I've created and sent IDOC messages from ERP to MII. However there is no single message found in MII. Any idea? The error message in MII is "Unknown error no messages" (something like that as I translated from German to English)
What I did checked
1. MII IDOC listener status - ok
2. ERP RFC connection -ok
But I saw error message under transaction SM58 "Error when opening an RFC connection"
Thanks for posting

Dear Seng,
I am working on MII12.1.5 build 91
I was also getting error in idoc receiving see below thread but now issue got resolved.
iDoc not received in MII
In my case iDoc sent successfully from SAP but not received in MII.
So i have created one more wrong RFC destination along with actual correct one.
then configured it in SAP NW as well as in SAP MII with same setting as i done for correct one it worked.
then i deleted the wrong RFC Destination and also deleted settings of wrong one in SAP NW and MII.
then my actual correct one is worked.
its strange but workes for me .
may i know on which MII version you are working.
Regards,
Manoj Bilthare

Similar Messages

Message Monitor Missing Messages in Adapter Engine

All,
I had over 200 messages in my adapter engine but recently I only see 115 for the same period.
Additionally, all of the 850 (PO) inbound messages are gone.   I see them in the Integration Engine but not in the Adapter Engine anymore.
I need to repeat processing for a particular 850 message and so I am wondering:
(1)   Any suggestions on why these messages are missing ?
(2)   Is this a retention period issue ? If so, how do I control the period ?
(3)   How can I retrieve these messages ?
(4)   Is there another place where I can re-process the 850 messages I need.   Where and how ?
Thanks everyone in advance for your help.
Regards,
Andy

Hi,
>>>(1) Any suggestions on why these messages are missing ?(2) Is this a retention period issue ? If so, how do I control the period ?
It may be caused coz of some adapter failure which you are using for that particular scenario. Also for rention period you can check it in the particular communication channel, but i don't think it will be the issue. try finding it in moni, if it is not there go to RWB and then find it for you particular interface. If it is not there try to find the status.
>>>(3) How can I retrieve these messages ?(4) Is there another place where I can re-process the 850 messages I need. Where and how ?
In RWB -> message monitoring you will find all the message, Try searching it for your interface and the you can select all messages and you can reprocess it.
For error message , in RWB go to particular adapter, and check if it is running or not. It must be in running status. so check and let us know about it.
Regards
Aashish Sinha

Trace level of RWB's Message Monitoring - Detail Message - Tab "Audit log"

Hi,
My flow is: File -> PI -> Transformed File with seeburger module. Everything is good except the trace level in RWB.
Exactly, in our PI production, under RWB -> Message Monitoring, when I select a message (e.g PI -> Outside) and see its Detail, under tab "Audit Log", I have a log with only 2 pages (which corresponds to the sender part "File -> PI")... whereas in our PI pre-production, I have 4 pages for the exact same flow, on which I have also info of the receiver part "PI -> Outside"...
My question is just: do you know which parameter is involved in this trace level of RWB's Message Monitoring Detail log ?
regards.
Mickael
Note: in [Help SAP|http://help.sap.com/saphelp_nw04/helpdata/en/fd/16e140a786702ae10000000a155106/frameset.htm], I see only this sentence "Audit Log: The audit log for the selected message is displayed as the default setting.".
Edited by: Mickael Huchet on Oct 18, 2011 1:59 PM

Hi Shabarish,
Thanks that will help to localize my search.
else by hazard, you don't know which parameter in this tree is for the "Audit Log"?
coz I did a quick look in prod and pre-prod, but it seems the severity is the same (e.g "Info" for most of them) whereas the trace level of "Audit log" is different.
Thanks for
Regards.

Notification of S1INVEXC (message Type) IDOC Message using Workflow

I have to build a Workflow for Notifying the IDOC details to a particular SAP user defined in the Partner Functions of SPEC2K. The Workflow should trigger as soon as the IDOC message of type S1INVEXC is recieved as Inbound process in the SAP.
How to go about, which Business object should be used? and what's the event which is invoked as the IDOC, is recieved.. Please give me brief details of starting this Workflow.
Can any one please give the Estimated duration for building this Workflow...
Message was edited by:
MANJUNATHA KS

Following steps would help you.
1. Create a new process code, and point the process code to the workflow using transaction WE42
2. Partner profile for the inbound message, use the new proces code.
hope it help.
regards
johnson zavier

Data Persistency in Message Monitoring of RWB

Hi All,
I am dealing with Sync. Interfaces and need to monitor the messages from Message Monitoring.
I have 2 Problems in the monitoring : -
1.     I can only see the messages for last 2 hrs in Message Monitoring.
        Messages Older then 2 hours are not getting displayed.
2.     Also if i am unable to see complete set messages in the 2 hr interval.I mean randomly
         messages are getting lost in message monitoring.
Is there any setting we need to maintain for Message Monitoring?
Helpful Answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hi
have a look at this SAP Note 1031773 - Activating the message overview in RWB message monitoring
message struck in adapter eng.(RWB message monitoring)
http://help.sap.com/saphelp_nw70/helpdata/EN/45/0ea84637643c0ae10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/be/38f0d8cbfe11d2a5f80060087832f8/frameset.htm
Thanks
Edited by: Abhishek Agrahari on Jan 8, 2009 8:14 AM

Exception in Message Monitoring when failed message is cancelled

Hi All,
I need some info regarding this.
In message monitoring a message from Sender A to Sender B fails and gets into "waiting" mode.
When I cancel this message, I immediately recieve an Exception message from Sender B to Sender A. I have not done any specific configuration for this.
This happens as many times as I cancel the message. I receive one exception message from the reciever to sender for one failed and cancelled message.
I am working on PI 7.1 and recently the system was upgraded to Service Pack 09. Has somebody faced this or can throw any light on this?
Thanks,
Rashmi.

The following are the message details.
Time Stamp Type Description
2010-05-21 07:25:06 Information Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2010-05-21 07:25:07 Information Message successfully put into the queue.
2010-05-21 07:25:07 Information The message was successfully retrieved from the receive queue.
2010-05-21 07:25:07 Information The message status was set to DLNG.
2010-05-21 07:25:07 Information The message was successfully delivered to the application using connection File_http://sap.com/xi/XI/System.
2010-05-21 07:25:07 Information The message status was set to DLVD.
Pasted below is the line from message monitoring.
End-to-End Information                  -
Status                                           Successful
Start                                              21.05.2010 07:25:06
End                                                21.05.2010 07:25:07
Sender Party
Sender Component                        SystemB
Receiver Party
Receiver Component                     SystemA
Interface                                        Exception
Message Format                            XI Message
Please, let know if anybody knows anything about this.

Adapter message monitoring: message in HOLD

Hi,
since we changed a scenario:
a) old scenario: R/3 --> XI --> BPM --> XI --> FTP
b) new scenario R/3 --> XI --> FTP
the messages stuck in adapter message monitoring.
Message-Interface is the same, CC is the same; just the way through BPM was canceled.
any suggestions?
Thanks
Regards Mario

Hi Mario,
messages are in status HOLD, when they need to be sent in exact order (EOIO), and an error occured in one (or more) queues. When you solve this error, restart the first message from the queue after this error and the items will be processed.
How to do that:
Go to messaging system servlet, find your message (in hold status) and click the Eye icon - Details. Now read the Conversation ID value - which is your queue ID.
Go to RWB, message monitoring, choose adapter engine( from combobox)-> display.Now click additional criteria, put the value of Conversation ID to conversation ID textbox. Start search. You'll see a lot of messages there in hold status I think, But find the one in System Error status. Try to resend this message, if it will not change its status (will still be in in System error), cancel it. Now restart first message from the queue, which was after this wrong one.
This should release the queue and process items.
If any questions, let me know.
Peter

What to do if I have in message monitoring

What to do if I have in message monitoring for messages of :
"Engine": "Integration Engine" status "cancelled with error".
What is (could be the error) and what steps should be done

Hi,
The Cause of this error could be the data is not transfered to the target system.may be the connection failure.due to this reason it will stuck in the queue.it will keep on trying to send the data to target system.at that time the status will be in waitiing stage.after some time it will change the status to cancelled with errors.
and also you can find the detailed explanation in the message monitoring tab by selecting the message and click on display.go to audit log view then you can able to see the details.
Note : Try to close this thread if you got the proper solution.
Regards,
Raju.

User XIRWBUSER does not have authorization for message monitoring

Hi All,
In the Runtime WorkBench, when I choose the Message Monitoring, display Messages from Component Adapter Engine from Database, when I click on the start button, it shows me a error "User XIRWBUSER does not have authorization for message monitoring", how can I configure my xi to get the authorization for message monitoring of Adapter Engine? Thanks!
Regards,
Nick

Hi Nick,
Transaction PFCG. Enter the role you wish to check (SAP_XI_RWB_SERV_USER) and click on the display button.
Check that the Authorizations tab is green. If it is not, then you might need to generate the auth profile. Also check the User tab. If it is not green, then you should do a User Comparison as well (just click on the button inside the tab).
SAP Help URL:
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67151e439b11d1896f0000e8322d00/frameset.htm
Cheers
Manish

Error message when IDOC Monitor

Dear Friends,
When i monitor IDOCs, i meet one type error message, and have no idea about it, anybody can give some ideas? and what dose the 'BOL' mean? please describe it in detail, thanks a bunch~
Senario:
Direction: 2 (Inbound)
Message Type: INVOIC
Current Status: 51 (Application document not posted)
Error messages in application log as following:
Cost document from BOL not found 73769702-001
Can't determine fiscal year
Freight condition not found 73769702-001 Z003
Freight condition not found 73769702-001 Z006
Error in Bose Freight Processing

These are posting error which you need to correct. BOL means Bill of Lading. You can go and check documentation of different fields in segment/idoc types for more information,

Error in Seeburger Message Monitoring

Hi ,
I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.

Really didn't understand your scenario. That sentence makes no sense:
"I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
But what I understand from the error message you have provided...................
if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
Under Parameters Tab:
You must have set the following parameter
MDN Mode = "ASYNC"
And has not provided the following parameter just below it :
Receipt Delivery Address
This parameter should have value: the URL of your own AS2
server where the asynchronous MDNs are
to be delivered.
Hope this solves your problem.
Regards,
Suddha

Message got struck in hold status in message monitoring.

Hi SDNers,
             I am doing Idoc to File scenario. I triggered an Idoc and it is successfully processed in XI and got struck in message monitoring with hold status.
             After repetetive attempts of restarting the message, still it is in hold status.
             Even if I tried to cancel the message, it is not cancelling as it is in hold status.
            Can anybody please help how to process the message or can anybody explain how to cancel the message from message monitoring, which is in hold status.
Regards,
Jayaram.G

Hi,
If the message that has not yet been delivered is not in error state, the problem cause is probably that the message is blocked in the QRFC queues of the Integration Engine.
Check queue status
Call the Integration Server and call transaction SMQR in the sender and receiver Integration Engine in the corresponding system client.
Check the status of the scheduler and the status of the XBQ* and XBT* queues:
u25CF     Inbound qQueues
XBTI* (ExactlyOnce)
XBQI* (ExactlyOnceInOrder)
u25CF     Outbound queues
XBTO* (ExactlyOnce)
XBQO* (ExactlyOnceInOrder)
u25CF     Acknowledgment queues
XBTB* (ExactlyOnce)
XBQB* (ExactlyOnceInOrder)
u25CF     Large message queue
XBTL* (ExactlyOnce)
If the scheduler has the status Waiting, it is waiting for free work processes. This is why delays occur when XML messages are processed.
If not all necessary queues are registered, you can search for queues with the name prefix above using transaction SMQ2. Use transaction SXMB_ADM to register the queues in this case.

SOAP error in audit log of message monitor

Hi,
I am using RPC wsdl file for idoc-xi-soap services. When I am doing the testing for the scenario in the message monitor I am getting the following audit log:
2008-02-29 15:21:48 Success Message successfully received by messaging system. Profile: XI URL: http://EMHBSSAP05.bekaertcorp.local:56600/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2008-02-29 15:21:48 Success Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-02-29 15:21:48 Success The message status set to DLNG.
2008-02-29 15:21:48 Success Delivering to channel: ZCC_Material_SOAP
2008-02-29 15:21:48 Success MP: Entering module processor
2008-02-29 15:21:48 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2008-02-29 15:21:48 Success Message successfully put into the queue.
2008-02-29 15:21:48 Success The message was successfully retrieved from the receive queue.
2008-02-29 15:21:48 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-02-29 15:21:48 Success SOAP: completed the processing
2008-02-29 15:21:48 Success SOAP: continuing to response message a9ea9a30-e6d1-11dc-c8bd-001a4b0658c1
2008-02-29 15:21:48 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success SOAP: sending a delivery error ack ...
2008-02-29 15:21:48 Success SOAP: sent a delivery error ack
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: SystemErrorAck
2008-02-29 15:21:48 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: AckNotSupported
2008-02-29 15:21:48 Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:.
2008-02-29 15:21:48 Success The message status set to WAIT.
Can anybody suggest what is the meaning and root cause for the error:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
Thanks & Regards
Prabhat

go to sxi_monitor and get the inbound message, later go to IR an do a TEST mapping.
any error occur?if yes, paste it here
generally soap fault o soap exception relate to an error from WS side,but before say nothing check you have all data and transformation OK.
hope it helps

In Message Monitoring Message showing holding status

Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
<b>Holding</b>
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Roy

Hi Debraj
HOLDING is a status which occurs normally for EOIO (Exactly Once In Order), so your message is set to Holding means some earlier message has not gone through. So until those messages are through this message will be in HOLDING state.
Have a look at this link which explains how to handle such scenarios.
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
cheers
Sameer
Assign points if it helped you

In Message Monitoring Message showing Error:Message

Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
<b>Holding</b>
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Roy

hi debraj..
is ur mesage ie sxmb_moni in red staus or scheduled status...??
if in scheduled cud be errors with queues ...delete ur queues with tcodes : smq1 and smq2...
and also hopefully u must have configured ur idoc correctly..
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
regards..
vishal

Message monitor - IDOCs messages

Similar Messages

Maybe you are looking for