Message Monitor List Empty

Hello All,
Working on MII12.1.6 Build 96, NW7.1 SP03
With my user name, I'm logging to MII on 2 different workstations, at the same time.
1st one is showing the messages received on the defined listeners in the Message Monitor.
2nd one showing "No data was found in result" ..
On the two stations we have the same browser versions, same JRE level, same everything (standard clean setup).
Anybody seen this happening before? What are your suggestions for the steps I should take to display the messages received by MII in the Message Monitor on both workstations using the default search pattern (i.e. all messages on all listeners, all types of message statuses)?
many thanks,
paul.

Hi Paul,
we have experienced something similar (empty Message Monitor list). It was due to different language settings in the NetWeaver UME user setting and the browser. Maybe you check if the language settings of the workstations and are different.
Michael

Similar Messages

Message monitor

Hi
I need to output information messages in the start routine and the update routines.
These messages are just for information and not necessary to stop any processing, eg:
   MONITOR-msgid = 'ZEBS'.
   MONITOR-msgty = 'I'.
   MONITOR-msgno = '001'.
   MONITOR-msgv1 = 'Finished update KF1'.
   append MONITOR.
I have created message class 'ZEBS' with message 001 = &1.
However in the monitor screen ('Details' tab), I just see the little green bullets with EMPTY lines ie. I do not see the above message - what am I doing wrong ?
Thanks,
Vick.

It looks like there are some Actions for the Message Listener Monitor listed in the MII help.
Actions for Permissions - SAP Manufacturing Integration and Intelligence - SAP Library

File Adapter picks up the file but cant see it in MONI/Message Monitoring

Hi
I am using FCC in Sender File Adapter and have only one sub structure under Recordset hence I have not used the 'Key Field Name' though ''Key Field Type' by default is 'String(Case-Sensitive)'. Besides the 'fieldNames' heading I have mentioned all the fields of the sub structure in the same order as I have mentioned in the Data Type.
The problem that I am facing is that even though the file is picked up from ftp successfully still I cant see any traces of it in either MONI or Message Monitoring though
The error that I receive in the MDT is -
Success : Entire file content converted to XML format
Warning : Empty document found. Proceed without sending message
Success : File "Test.csv" deleted after processing
and I have data in the file.
Can u suggest a solution?
Warm regards,
Vaibhav

> Hey
> >>So I have filled my test excel file with the values
> A and B in adjacent columns
> are you picking up some .xls file?if yes,then Content
> conversion wont work,You have to create adapter
> module processor and you have to add to your module
> processor bean to the adapter...Just check the
> following procedure...
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 1967
> Thanx
> Aamir suhail
Hi Aamir
I had a look at the blog and according to that I will need to create a module...the prob with that is in the blog he hasnt provided the full steps for that. Also I had tried this thing earlier of using an excel file and saving it in .csv format and it had worked. I cant figure out what the error is this time
Have u worked on creating amodule for excel files b4?
Vaibhav

Error in Message Monitoring in XI.

Hi All
Affter clicking Message Monitoring in RWB there is DETAIL button above the message listed when i am trying to click on the detail button it shows the error like "The page cannot be displayed".
pls help me .
Thaking you in advance.

Hi Hiren,
Plz check below mentioned blog. It will help you out:
<a href="/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi:///people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Subhasha

Message Monitoring for each within the BPM process

I have a question concerning message monitoring within a BPM process. I receive an IDOC into my BPM process. I then have three transformation steps before sending an E-mail to the end receiver. When I look at the messages in the workflow log, I am unable to see the message after each transformation step. In the log display if I click the instance ID for all steps except the first step I am unable to see a message.
List of Message Objects
Object Type              Instance    ID                          Creation Time
ZXI_PROXY...0001     DC9F66530C7899F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C789FF1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78A5F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78B1F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78ABF1AC430017A44943B2      11:04:39
ZXI_PROXY...0001     DC9F614BA98C51F1AC430017A44943B2      10:28:40
If I click all except the first instance I receive the following message:
No messages available for selection
Message no. XMS_ADM113
Is there a way to make the message persistent after each step within the process? I would like to see the data after each step in the workflow log. Is this possible?
I do receive the e-mail from the send step so I know that it's completing the process. What I'm not sure of is if each step individually processed the data as I expected.

Hi Audra,
Check this link
BPM monitoring
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Sachin

Audit log missing in message in Message Monitor

Hi,
I am facing a weird problem.
I found this in one of my scenario where we are using AS2 adapter and its an IDoc to file scenario.
When I go to details of messages in message monitor in RWB,sometimes the Audit log is empty.
It is happening randomly and not specific to any scenario as later on I found the same problem in some messages from other scenarios too.
I have never faced this problem till now and it was working fine before.
Can anyone please let me know what could be the reason for this as this is difficult for me in case I need to analyse a message and there is no audit log.
Thanks in advance.
Regards,
Shweta

Hi Rajesh,
Doesnt work for me :(((
404 Not Found
The requested resource /messagingsystem/monitor/monitor.jsp is not available
Details: File [messagingsystem/monitor/monitor.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
Thanks.
Regards,
Shweta

Message Monitor - Access rights

Hello,
we want to give some user access rights to look into Message Monitor to track the transfer of IDOCs.
Basically we have the role Role_SAPMEINT which lets us take look into the queue monitor but not the message monitor.
By which UME roles or UME actions is this part is accssible for the user.
I don't want to give the user SAP_XMII_Admin role.
Regards,
Kai

It looks like there are some Actions for the Message Listener Monitor listed in the MII help.
Actions for Permissions - SAP Manufacturing Integration and Intelligence - SAP Library

SOAP to RFC : Message visible in Message Monitoring , but not in SXMB_MONI

Hi Experts,
I'm doing a SOAP to BAPI scenario. The interface is a SYNCHRONOUS one . I'm using XML SPY as the soap client to test the interface. Even though i don't have the test for the BAPI after sending an empty request message i'm able to receive an empty response from the BAPI. I'm also able to see the message send in message monitoring .
But when i go inside SXMB_MONI its acting in a strange way . I'm not able to see the any of the messages. Any ideas??
Thanks & Regards,
Rahul.

Hi Rahul,
Synchronous messages are not persisted on the Integration server unless logging is switched on in SXMB_ADM Tcode(Specific Configuration->RUNTIME(Category)->LOGGING_SYNC(Parameters)).
That's the reason you couldn't find SYNCHRONOUS message in SXMB_MONI.
Thanks,
Jag

SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
André

Hi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André

How to add proxy node in message monitoring RWB

Hi all,
in RWB message monitoring , i can see two options in drop down list those are integration engine and adapter engine. i want to add one node for proxy run time also.
can anybody let me know how to add a node for proxy runtime?
any document or help will be appreciated
Thanks
sandeep sharma

Hi,
connect your SAP application system (like ERP, etc.)
to SLD - the same one as PI uses (you need to have PIRWBUSER on ERP too)
then start transaction SPROXY and build and interface on it
start it and check if you see the new node in message monitoring
Regards,
Michal Krawczyk

Workbench - Message Monitor

Hi,
I've got a question on the Message Monitor on the Runtime Workbench.
If I select a message and choose the details button it pops up a window with the message details. Yesterday this pop-up window had 3 tabs on it which among other things displayed the webservice commands and responses. Today after a system reboot it only displays a single tab with the basic message data.
Any idea on how to display the rest of the information?
Regards,
Liesel

Liesel,
yesterday you looked to messages in the adapter engine, today you look to messages of the intergration server.
Just this.
Check the list-box "Messages from Component" in the RuntimeWorkbench
Regards,
Sandro

In RWB (message monitoring), a small doubt

Hi All,
When i go to runtime workbench and click the message monitoring option, I get a drop down list with text "Message from component". In this list there are two things :
af.cnw.cbrindnw
af.cnw.
Can somebody explain the meaning of these.
here "cnw" is our netweaver server system id
and "cbrindnw" is our netweaver server name
Regards,
Mona.

Hi,
Please check the config required for runtime workbench:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
Check if the following paramter are set correctly:
Please can you check on the parameters:
com.sap.aii.rwb.serviceuser.name
com.sap.aii.rwb.serviceuser.pwd
com.sap.aii.rwb.serviceuser.language
in the excahnge profile. check for correct userid and password.
Also check if the user has the following roles:
SAP_SLD_CONFIGURATOR
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
Regards
Vijaya

GUI-- Available system list empty

Dear Expert
The SAP Systems are not displaying in GUI while maintaing system in "create new system entry", the list are empty and you can create new system by the clicking on the user specified sysstem.
I have matained the following files;
     sapmsg.ini c:\windows
     saproute.ini c:\windows
     saplogon.ini is maintained himself
sapmsg.ini and saproute.ini file maintained properly. i am able to see the Router list and message server list while maintaing the system through the group server selection screeen

Hi,
thanks for the hint with the server log. I found out that the portal server gets an error if VCServer tries to get the system list.
<b>com.sap.guimachine.portalconnector.commandhandler.CommandException: com/sap/portal/services/api/connectorgateway/IConnectorGatewayService</b>
Do you know what this means?
Regards

No recipient specified - is the distribution list empty?

Hi All,
When I am trying to send a mail to the internet mail id using System->Short message....it throws a message like...
"No recipient specified - is the distribution list empty?"
Please help me...

That's even stranger. I used that FM 5 minutes ago with this data, in se37, and I received the email.
I_TITLE                                   TESTE
I_SENDER                              <my work email>
I_RECIPIENT                           <my personal email>
I_FLG_COMMIT                       X
I_FLG_SEND_IMMEDIATELY   X
Tables                         Value
I_TAB_LINES                        1 Entrada                     (TESTE written in row 1)
See if you have your SMTP node of SAPConnect well configured.
Regards.
Valter Oliveira.

Mail "message summary" list disappears for Exchange account

The "message summary" list in Mail keeps disappearing when I view my Microsoft Exchange mail account (a corporate Office 365 account). For example, when I highlight the Exchange Inbox in the Mailbox List, Mail will show the summary list with all messages in the Inbox, but then after some random delay will change and show an empty list regardless of whether or not there are any messages in the Inbox. Highlighting some other mailbox and then re-highlighting the Exchange Inbox restores the summary list temporarily.
This is on a MacBook Pro (Retina, 15-inch, Mid 2014), running Yosemite 10.10, and connecting to outlook.office365.com.

OK a little more information as I investigate.
I did run a packet trace and I can see packets back and forth between my PC and the External Exchange server address over HTTPS so they are talking..
I'm mystified why none of that shows in either connection doctor or in the error message that comes back.. Log/Debug options on the mail client side would be really appreciated.

Message Monitor List Empty

Similar Messages

Maybe you are looking for