Message Monitor Missing Messages in Adapter Engine

All,
I had over 200 messages in my adapter engine but recently I only see 115 for the same period.
Additionally, all of the 850 (PO) inbound messages are gone.   I see them in the Integration Engine but not in the Adapter Engine anymore.
I need to repeat processing for a particular 850 message and so I am wondering:
(1)   Any suggestions on why these messages are missing ?
(2)   Is this a retention period issue ? If so, how do I control the period ?
(3)   How can I retrieve these messages ?
(4)   Is there another place where I can re-process the 850 messages I need.   Where and how ?
Thanks everyone in advance for your help.
Regards,
Andy

Hi,
>>>(1) Any suggestions on why these messages are missing ?(2) Is this a retention period issue ? If so, how do I control the period ?
It may be caused coz of some adapter failure which you are using for that particular scenario. Also for rention period you can check it in the particular communication channel, but i don't think it will be the issue. try finding it in moni, if it is not there go to RWB and then find it for you particular interface. If it is not there try to find the status.
>>>(3) How can I retrieve these messages ?(4) Is there another place where I can re-process the 850 messages I need. Where and how ?
In RWB -> message monitoring you will find all the message, Try searching it for your interface and the you can select all messages and you can reprocess it.
For error message , in RWB go to particular adapter, and check if it is running or not. It must be in running status. so check and let us know about it.
Regards
Aashish Sinha

Similar Messages

Message do not exists in adapter engine

I have a message being sent to IE via JMS Adapter . In Communication channel monitoring i could see the message Id & error message(Error in converting Binary message) but with that message id i could not find any entry in Message monitoring - > Adatpter Engine. Moreover , In communication channel monitoring the id with which the message failed is not hyperlinked to "Message Display Tool (Detail Display) ".
I need the message which is failed.
Thanks ,
Satish

It may be possible that message came into error as soon as it was picked by the sender channel. Could you see some error for these messages in Communication channel monitoring? Another possibility is your message is persisted in the adapter engine for very short duration. In that case, if it is archived, you may select the Archive option in Message Monitoring instead of Database option.
Regards,
Prateek

Getting message Attempt to determine which Adapter Engines......

Hello All
1. I am Getting System message 'Attempt to determine which Adapter Engines are affected by data changes failed' in the Integration Directory.
Updating SOAP Adapter (Sender channel).
Refreshed all caches...
2. Also while testing using SOAP Test client getting response
HTTP/1.1 500 Internal Server Error
connection: close
set-cookie: JSESSIONID=(XIServerName_03)ID1387309050DB21025913116517472411End; Version=1; Path=/
set-cookie: saplb_*=(XIServerName_03)31556950; Version=1; Path=/
server: SAP J2EE Engine/6.40
content-type: text/xml; charset=utf-8
any idea?
Thanks in advance

Hi Naveen
Thanks for your reply...
Actaully previously sender channel was working fine, i just updated the default namespace in the channel.
I was getting the error because of wrong namespace in channel (Case sensitive).
So i updated this name space and after activation i am getting above message while testing.
Regards

Message Id duplicated error in Adapter Engine

Hello guys,
last week we had an error in an adapter JDBC sender. The error we see in the adapter is: Error during commit or rollback of database transaction: 'com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to commit transaction: The transaction has been rolled back: com.sap.engine.services.ts.transaction.TxRollbackException'
If we see inside the error says that when is tryring to put the message in the queue the error is that the key message id is duplicated.
Searching in the message monitoring, there is a message processed with the same message id 3 hours before.
The problem was after a re-start of PI, and the solution was to create a copy of the adapter. we tried to start/stop, inactivate/activate and the error still continue, Ia have not tried to put the old adapter again.
Anybody knows what could be the problem or a correct solution?
Many thanks ind advance.
Regards,
Xavier.

Hi, Xavier
See note 1361305 - File sender adapter generates duplicate message IDs.
In my system, this note solved the same problem in JBDC and file adapter.
Regards,
Carme.

Error resending messages with system-error in Adapter Engine

Hi all,
We got an error when trying to resend all messages in error in runtime workbench, message monitoring, adapter engine, database (overview), clicking on a sender service with messages in error state, and clicking on "repeat" button to resend those in error messages. The error is "No authorization to execute action for component Adapter Engine XP0". The user We are using to perform this task is associated to all groups available in CUA... some of you has any tips about how to perform this operation?
regards.
roberti

I really don't remember what solved this problem, but it is solved. Now the functionality works as it should.
Regards.
Waldemar Roberti

Messages are not reaching to Adapter Engine (JMS receiver)

Hi Friends,
We have one scenario running on Production env.
Scenario is: R3(IDOC) -> XI ->JMS Provider
IDOC to JMS.
Sometime we found messsages are successful in SXMB_MONI, but those messages entries are not found under AE.
Means they are not reaching to JMS.
Communication channel is green, without any error.
This happens sometime only, and no changes have been done to JMS adapter parameters.
What might have happen to these messages, which are successful in MONI but not visible under AE.(Even not in Archived option)?
I searched on SDN, but most of the questions are unanswered.
Please let me know your inputs.
Divyesh Vasani

Hi Divyesh,
check under message monitoring in RWB
if u r not finding the message there , those might be archived.
did u confirm with the destination system .. if they got the messages?
if at all messages are stuch in AE ... and if u search the correct message u should be able to see the message.
if the Integration engine unable to put messages in AE , then in some pipeline step in MONI it will show error

Messages got stuck in inbound adapter engine queue

Hi Experts,
My senario is File - XI -SAOP reciever and we have 8 usecases of same type. For 7 usecase, we dont have any problem. But for only one use case we have having heavy delay in processing messages.
All my messages got stuck in inbound queue of Adapter engine in to be delivered state, wait state, delivering state.
Please see the below logs and suggest some solution.
To be delivered Message log :
Time Stamp Status Description
2008-06-30 06:54:20 Success Processing child message of multi-message with message ID 8c597510-466f-11dd-92f9-000f203c93e0
2008-06-30 06:54:20 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:54:20 Success Message successfully put into the queue.
Waiting Message log :
Audit Log for Message: 4864ad2b-cabd-5891-e100-00000aa3fdb2
Time Stamp Status Description
2008-06-30 06:42:24 Success Processing child message of multi-message with message I
2008-06-30 06:42:24 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:42:24 Success Message successfully put into the queue.
2008-06-30 07:46:16 Success The message was successfully retrieved from the receive queue.
2008-06-30 07:46:16 Success The message status set to DLNG.
2008-06-30 07:46:16 Success Delivering to channel: CC_SOAP_Receiver
2008-06-30 07:46:16 Success SOAP: request message entering the adapter
2008-06-30 07:51:24 Success SOAP: call failed
2008-06-30 07:51:24 Success SOAP: sending a delivery error ack ...
2008-06-30 07:51:24 Success SOAP: sent a delivery error ack
2008-06-30 07:51:24 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
2008-06-30 07:51:24 Error Exception caught by adapter framework: Read timed out
2008-06-30 07:51:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
2008-06-30 07:51:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Jun 30 07:56:24 GMT 2008.
2008-06-30 07:51:24 Success The message status set to WAIT.
Delivering Message log :
Audit Log for Message: 4864ad2d-cabd-5891-e100-00000aa3fdb2
Time Stamp Status Description
2008-06-30 06:42:24 Success Processing child message of multi-message with message ID 7481f110-466f-11dd-b8ce-000f203c93e0
2008-06-30 06:42:24 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:42:24 Success Message successfully put into the queue.
2008-06-30 07:46:24 Success The message was successfully retrieved from the receive queue.
2008-06-30 07:46:24 Success The message status set to DLNG.
2008-06-30 07:46:24 Success Delivering to channel: CC_SOAP_Receiver
2008-06-30 07:46:24 Success SOAP: request message entering the adapter
2008-06-30 07:51:24 Success SOAP: call failed
2008-06-30 07:51:24 Success SOAP: sending a delivery error ack ...
2008-06-30 07:51:24 Success SOAP: sent a delivery error ack
2008-06-30 07:51:24 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
2008-06-30 07:51:24 Error Exception caught by adapter framework: Read timed out
2008-06-30 07:51:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
2008-06-30 07:51:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Jun 30 07:56:24 GMT 2008.
2008-06-30 07:51:24 Success The message status set to WAIT.
Thank you
Subbu

Dear Subramanyam,
Some message might be struck in the queue. Because of this reason furthur processing is not performed on time.
Please try to do like this:
Go to SXMB_MONI, or SXi_monitor, select QueueID in the row, which is showing green flag. In the next window belongs to queue select the queue and press unlock button on the panel.
This could possibly release the queue which is struck.
Best Regards
Praveen

Message sutck in TBDL in Adapter Engine

Hi all,
We use RequestResponseBean and ResponseOnewayBean in the conversion from Async RFC to Sync SOAP.
There was a big message load on this integration this morning. In the Adapter Message Monitoring, I found thousands of messages stuck in TBDL status. I checked in SMQ1 and SMQ2, there are no stuck queues.
Anyone knows the problem.
Thanks!
Regards,
Hui

hi,
I think there is some configuration error with the corresponding communication channel.

EO Messages with Delivering Status in Adapter Engine

Hi All,
We have a scenario DB-DB Asy with Java Proxies. Proxies are there to accept the messages from Sender DB and insert in target DB. Get the response from target DB and insert back that to Sender DB.
Actually the scenario is Syn, but we made it as Asynchronous by implementing Java Proxies.
Now we are using EO mode in Sender JDBC channel. We have 17 interfaces in the similar pattern. We are using one common XI receiver channel for all these 17 interfaces.
If one message got struck, then rest other Proxies are not getting triggered and not able to resend the message ( ofcourse I know I cannot resend with Delivering Status). But not sure what causes the messages to failed with Delivering Status mode.
Any pointers would be highly appreciated.
Will increase of Parallel Queues really solve my problem? If it fails in Prod, its a big problem for us as we dont want to lose the data. Now everytime we are restarting the Message service server.
Regards,
Srinivas

Normally if there is any problem in target then you will see the adapter engine message as delivering
after the no of retires set then status will go to system error
during this entry check the CC used what is the error causing for that ?
HTH
Rajesh

Missing "SAP XI Adapter engine" in CCMS Monitor

Dear all,
we try to configure PI CCMS monitor but we can't find the subtree "SAP XI Adapter engine " in Visual admin.
In detail:
the subtree "SAP XI Adapter engine "is not displayed in Visual administrato under
server->service->monitoring->Monitor tree ->Root application .
So we have set to true the value "CCMSEnabled" of seervice "SAP XI AF core" , and we have restarted the instance.
After the restart i DO NOT find the "SAP XI Adapter engine " in
SAP NetWeaver Administrator,
'System Management' -> 'Monitoring' -> 'Java System Reports' -> 'Reports'. From the dropdown list 'Report' choose 'Monitor Browser', and display all monitors
So I can't activate the monitor.
and if the subtree is not present , i can't see the MTE in "SAP XI Adapter engine " RZ20.
Additional info:
- In RZ20 I have my system under SAP J2ee Monitor template->All system
but the MTE "J2EE Applications" is grayed.
- In file application.xml under /usr/sap/ccms/XIT_10/j2ee<server0> i do not find the tag:
<app name="application sap.com/com.sap.aii.af.app">
<node>\XIT\XIT 10 Appl .... sp30t0\SAP XI Adapter Engine</node>
</app>
I think this is the correct procedure that we have done in other different landscape whithout problems.
Is there something else to check ?
I've alredy checked following Blogs
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Thanks in advance
Steven

Hi Sekhar,
I am using PI 7.0 instead so I have followed the instruction in (http://help.sap.com/saphelp_nw70/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm) instead.
The problem is, Adapter Engine is still not listed as one of the application avaialble for Monitoring in Visual Admin even though the SAP XI AF Core has definitely been set with CCMSEnabled = true.
Any further suggestions?
Thanks,
Wi

Messages in "holding "status in Adapter engine

Hi All
We have a problem with the messages being stuck in " Holding " status
We have resent the payloads for these messages,
Although these messages have been manually processed,
1) Messages went into holding status and are still remaining with the same status
2) What we need to do to get rid of message ie. cancel, delete etc.
Please dont send links, A solution will be appreciated
Kindly help

Rajeev
I followed this
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
and the messages did get cleared
However on the date it got stuck to the Holding state
it is still showing so .
and am unable to get rid of the same status for these messages for that date .. even tried a cache refresh but doesnt help
kindly suggest
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework

1636215 - Performance monitoring for the Advanced Adapter Engine

Hi ALL,
How can we monitor the performance by changing the parameter to true in the above note please please help me
Thanks,
Raj

Hi Dheeraj,
Since you've gone through the note, I'm assuming you know how to activate the performance monitoring for adapter engine.
However, there are reservations against doing it in any system Dev/Quality/Production. Reason being, it becomes performance/load intensive when the perf. monitoring is on.
Still, you can diagnose bottlenecks and execution trends in Dev/Quality using performance monitoring as suggested in the note but be aware that your box is coping well with it. Please note, once activated, you don't have to do anything else. System will automatically collect performance data and you will be able to browse through it using the performance monitoring link.
How to use it???
You see a performance monitoring link in Monitoring Home (navigate via Configuration and Monitoring home from PI/PO homepage).
It will help you analyze the flow of message on periodical basis (hourly/daily etc) and will give you more stats on number of messages in that time duration, average time taken, message sizes (min, max and avg), interface-by-interface detail of runtime consumption at every stage etc.
Please go through standard SAP help for more clarity:
Monitoring Performance - Advanced Adapter Engine - SAP Library
Apart from this, there is this great blog by Suseelan around monitoring:
http://scn.sap.com/docs/DOC-35805
Hope this helps.
Regards,
Abhishek

Missing link to Adapter Engine from XI 3.0 web start page.

All,
After deploying sda's for adapter framework core, framework and XI tools the Link to the Adapter Engine from the XI start page is now missing.
Any ideas??
thanks,
Linwood

Hello Linwood ,
the adapter engine is not longer a seperate application in XI3.0, rather it is a completly integrated part of XI3.0. You can configure the XI3.0 adapter engine only from the integration directory's communication channel which replaces the end point from XI2.0.
I hope this helps you!
Best Regards
Björn

Trace level of RWB's Message Monitoring - Detail Message - Tab "Audit log"

Hi,
My flow is: File -> PI -> Transformed File with seeburger module. Everything is good except the trace level in RWB.
Exactly, in our PI production, under RWB -> Message Monitoring, when I select a message (e.g PI -> Outside) and see its Detail, under tab "Audit Log", I have a log with only 2 pages (which corresponds to the sender part "File -> PI")... whereas in our PI pre-production, I have 4 pages for the exact same flow, on which I have also info of the receiver part "PI -> Outside"...
My question is just: do you know which parameter is involved in this trace level of RWB's Message Monitoring Detail log ?
regards.
Mickael
Note: in [Help SAP|http://help.sap.com/saphelp_nw04/helpdata/en/fd/16e140a786702ae10000000a155106/frameset.htm], I see only this sentence "Audit Log: The audit log for the selected message is displayed as the default setting.".
Edited by: Mickael Huchet on Oct 18, 2011 1:59 PM

Hi Shabarish,
Thanks that will help to localize my search.
else by hazard, you don't know which parameter in this tree is for the "Audit Log"?
coz I did a quick look in prod and pre-prod, but it seems the severity is the same (e.g "Info" for most of them) whereas the trace level of "Audit log" is different.
Thanks for
Regards.

Instant messaging - 1st missed message is hidden

Hi
I noticed in version 7.0 that if I have multiple missed messages in group chat then 1st missed message is 1 line above (it's hidden) so I have to scroll up to see it.
Thanks,
Milos

Try to reset all Internet Explorer settings: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings#ie=ie-11 Next reset LAN settings: Open Internet Explorer. Go to Tools -> Internet Options -> Connections -> LAN settings. Make sure that the only option selected is “Automatically detect settings”. Next clear all Temporary Internet Files: Open Internet Explorer -> Tools -> Internet Options -> General. In the section “Browsing history” press the “Settings” button and in the next window the “View files” button. Delete all files from the Temporary Internet Files folder.

Message Monitor Missing Messages in Adapter Engine

Similar Messages

Maybe you are looking for