MESSAGE monitoring for PI (process integration) in rfc queves

Hi.
i have got to look at rfc queves,for checking if any messages stuck in queves while message processing in a idoc to file ,file to rfc scenarios.
so could any bosy explain me in detail of how to do with smq1,smq2,sm58,idx5,sldcheck,sldcache(tcodes) in PI(XI).
Will be waiting for your response.
bye.
regards.
Jagdish.

You mentioned all the transaction that deal with that. When ever you have an error, you would see errors in those transaction and you can deal with them by clicking on the queue entries..
VJ

Similar Messages

Message scheduled for outbound processing

Hi All,
We have an issue where a message is stuck in MONI in scheduled status. We checked to see if there is any stuck queues, we did not find any errors nor entries. The message has the staus "Scheduled for Outbound processing", also we can see the JOB ID (JOBnumber) with status "job not yet executed". The remaining interfaces in this landscape are working fine.
Appreciate your help!!!
Thanks,
Gunasree

Hi
We can prevent this problem through standard SAP program RSQIWKEX. This program need to execute background. Whenever any message stuck in queue automatically this problem will restart error message automatically. If you want to delete error message from queue (due to this error message remaining messages are in hold stage. for remaining message execution we need to delete error message from queue) we need to change one function in this probem.
Existing function TRFC_QIN_RESET_LUW , this function only can restart error message.
Need to add function TRFC_QIN_DELETE_LUW , this function delete error message from queue.
For this program execution we need to mentioned queue name(mandatory), find message stucking queue name and give same name to program in variant.
/people/gourav.khare2/blog/2007/12/21/mass-cancellation-of-error-messages--xi
Re: Unable to delete the messages scheduled for outbound processing
Regards
Pothana

Restart message scheduled for outbound processing

Hi,
I'm having a BPM process that collects IDocs. A lot of messages got stuck now in the status message scheduled for outbound processing. Can I manually restart these messages? What will it happen if I restart them? Will they be sent twice or just once?
Thanks in advance,
George

> I'm having a BPM process that collects IDocs. A lot of messages got stuck now in the status message scheduled for outbound processing. Can I manually restart these messages?
I think you are looking in MONI for status "Recorded for Outbound Processing" .. correct?
Just scroll towards right and then you will find the Queue ID against your message, just click on this id and see if it has got stuck in queue if yes then just process it from there.
>What will it happen if I restart them? Will they be sent twice or just once?
If you process the message it will be posted only once.
Regards,
Sarvesh

Message Monitoring for each within the BPM process

I have a question concerning message monitoring within a BPM process. I receive an IDOC into my BPM process. I then have three transformation steps before sending an E-mail to the end receiver. When I look at the messages in the workflow log, I am unable to see the message after each transformation step. In the log display if I click the instance ID for all steps except the first step I am unable to see a message.
List of Message Objects
Object Type              Instance    ID                          Creation Time
ZXI_PROXY...0001     DC9F66530C7899F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C789FF1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78A5F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78B1F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78ABF1AC430017A44943B2      11:04:39
ZXI_PROXY...0001     DC9F614BA98C51F1AC430017A44943B2      10:28:40
If I click all except the first instance I receive the following message:
No messages available for selection
Message no. XMS_ADM113
Is there a way to make the message persistent after each step within the process? I would like to see the data after each step in the workflow log. Is this possible?
I do receive the e-mail from the send step so I know that it's completing the process. What I'm not sure of is if each step individually processed the data as I expected.

Hi Audra,
Check this link
BPM monitoring
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Sachin

How to stop message "planned for outbound processing"?

We have two messages with status "planned for outbound processing". Because we want to quit them i want to know how to do this?!
Can somebody help?! these messages seems to be stuck because of java-mapping!?
br

Hi,
Check the Queue name in Sxmb_moni and as expert Aamir mentioned go to Tcode - SMQ2 look for the Queue name and delete the message.
Cheers
Agasthuri Doss

Business Activity Monitoring for BPEL Processes

Hello,
IEP is capable of monitoring real time events, Real time business event collection and processing.
In that case, can we use IEP to monitor BPEL process activities with activity data.
One very big part, the ability to provide functionality for third parties (clients like Me) to register some sort of observer to capture live BPEL process activity, is missing.
I'm trying to cover that big hole in my project. That's the reason I'm posting about BPEL process management capabilities and events.
But I got no concrete answers for that. Not every business use can be provided by any generic system.
I looked at CAM (which comes with Alaska build). But I couldn't get much info about entire picture.
Other BPEL engines, the one I have used, has the functionality to do activity monitoring and process management. (IBM Process server, Apache ODE)
Could any IEP, BPEL component developers answer any sort of solution to my use case?
Thank you
Raja

I agree that this would be very useful. If anyone can provide additional insight it would be much appreciated.

Payload not visible in message monitor for BPMN

Hi Folks,
I am doing synchronous call from BPM (NW) and though the call is successful I am not able to see the payload for the syn Re/Response messages. In the old BPM in PI I used to check the new transaction box and I used ot see the message. Is there any similar option in BPMN to view the messages internal to BPMN?

I see the messages in Process Instance view under context Data.

Message code for outbound processing

Hi Experts,
I want to know the procedure for sending the transactional data from one server to another server. Briefly describe about Message code, other methods also. It's urgent.
Regards,
nagaraju

One of the ways to send the data is through Idocs.
You need to maintain the partner profiles and ALE settings for it to be sent from one system to another.
Partner Profile T-Code - We20
You wll need to maintain an Idoc type against a partner and create a process code to trigger that outbound.
If you learn more about Idocs, you will get a better picture
Thanks,
Sanjiv

Error in t-code MB90: No messages exists for repeat processing exist...

Hello experts,
I am currently trying out transaction code mb90 and entering the necessary information. When I click on the execute button the error above(the subject line) appears below. I am trying to debug my sapscript form through this t-code but I cannot proceed because of the said error. Thanks a lot guys!

Hi viray,
You can use MIGO transaction to create messages.
See http://projectmanagement.ittoolbox.com/groups/technical-functional/sap-r3-log-mm/736652
http://www.dgs.state.pa.us/surp_prop/lib/surp_prop/warehouse/9._sap_procedures.doc
Regards,
Wenceslaus.

No show message in monitor for processed XML messages

Hi,
I get the document 'VALIDANTING A CONNECTION BETWEEN SAP R/3 AND SAP XI WITH RFC' and following the steps until step 9 it's ok but I can execute the step 10 I get 2 problem:
First Problem - I dont know where see the ABAP code STFC_CONNECTION, How do you know?
The Second Problem is the step 11 the system not show message and the documentation show message.
Please Help-me.
Any Ideas ?
Regards.
Mattos.

Hi, Ashish thanks for anwser my doubt.
So, the step 10 is "10. Refer to the following ABAP code snippet for executing the STFC_CONNECTION programmatically
instead of using the user interface shown above.
Call STFC_CONNECTION to send/receive request/response to/from XI***
DATA: v_msg_text(80) TYPE C. "Message text
CLEAR v_msg_text.
CALL FUNCTION 'STFC_CONNECTION'
DESTINATION 'XI'
EXPORTING
requtext = 'REQUEST_TEXT'
EXCEPTIONS
communication_failure = 1 MESSAGE v_msg_text
system_failure = 2 MESSAGE v_msg_text.
IF SY-SUBRC NE 0.
**Write your code here**
ELSE.
**Write your code here**
ENDIF."
and the setep eleven is "11. Check the Integration Engine monitor for the processed XML messages (SXMB_MONI):
Shows Sender Interface:"
But I not see messege in my Monitor.
Other doubt in step 5 the document order to create the RFC_Sender Communication Channel, this configuration have the parameters PROGRAM ID (mandatory), we dont have any idea what input there, Can you Help-me? How can find this parameters? in document we have the exemple INTEGRATION_SERVER.
Thanks.
Regards,
Mattos.

XI Message Monitoring - Mapping custom fields for search in monitor?

Is it possible to map a reference field so that searching for a specific message is more user friendly?
For example, we produce hundreds of outbound SHPMNT04 messages each day. Would it be possible to map a field such as E1EDT20.TKNUM (Shipment Number) to a field in the monitor (SXMB_MONI) such as "Outbound Reference" so we can easily search on this field?
Currently we use a combination of WE09 and IDX5 to find a specific message. Obviously, this is cumbersome and time-consuming.
Thanks in advance.

Hi,
of course it is possible in many ways
there are at least two ways
the first one is to use Trex search for xi + standard
the second one is described in this weblog + but remember that
without indexing this will take long to search like this
/people/alessandro.guarneri/blog/2006/02/14/super-message-monitor-for-sap-xi
Regards,
michal

XML message going for sheduldeld for outbonding process

HI,
I am new to XI..during SAP to SAP scenario i am getting message in sxmb_moni XML message schedule for outbounding process.
Can anyone tell how it can be converted in checkered flag.

> Hi Sunil,
>
> >>>>So its showing RUNNING status in queue details.
> just have some patience..
>
> Regards,
> Udo
LOL.
Finally some humor on SDN forums.
Henrique.

Cannot see adapter engine messages in message monitoring

hi guys,
i cannot see my adapter engine messages in message monitoring for my http to RFC syncronous scnenario.
i can however see the integration engine messages and can also see the receiver RFC channel in communication channel monitoring

Hi
this link ll help u in it -
Adapter Engine monitoring is provided in detail. Try as mentioned
http://help.sap.com/saphelp_nwpi71/helpdata/EN/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
Regards

Scheduled for Outbound Processing in SXMB_MONI

I have a scenario RFC -> ccBpm1 -> ccBpm2 -> ccBpm3 -> RFC.
The scenario was working perfectly. I made some simple changes in ccBpm3 and some errors started to happen.
The Xml message from ccBpm1 to ccBpm2 started to stuck (message Scheduled for Outbound Processing in SXMB_MONI). I didn´t make ANY change in ccBpm1 or ccBpm2, before the error started.
When I made a "dummy" change in ccBpm2 and I reactivate it, the message from ccBpm1 to ccBpm2 process, but then the message from ccBpm2 to ccBpm3 stucks. If I do a dummy change in ccBpm3, the message from ccBpm1 to ccBpm2 stucks again.
I have no Queues locks in smq1 and smq2. The Cache status are all 0 in SXI_CACHE. I have tried to reimport all Integration Process in Integration Directory, but no sucess.
Seems to be any kind of bug.
Any idea?
Thanks

First, I would like to know.. if there was a justification to divide the scenario into 3 BPMs. Because BPMs add to system performance. They get converted to workflows on abap engine and context switches from java to abap engine. You might want to check you configuration in ID test configuration and then close analysis of the message processing in each of the ccBPMs.
VJ

Showing Red flag in Message Monitor

Hi All,
I am getting red flags in Message Monitor while send from SAP through RFC.
If i click the flag, showing message "Column status could not process - Transaction Execution Terminated Upon Request"
previously its worked properly. In last process we have send at a time 150 message to message listener, in that it has processed 100 messages successful and rest of them show in red flag.
After that even i send single message also, its getting red flag.
And how can we reprocess those messages
Can anyone please let me know how to solve it.
Thanks,
Kind Regards,
Praveen Reddy M
Edited by: praveen2425 on Mar 7, 2012 8:17 AM

Hi ,
I have found that error where it has been terminating.
I have kept condition action block below the sql insert query in my transaction as i am calling from Message process rule.
Under condition action block, i have kept leftside SAP jco and rightside stop action block
If the query successful execute it will trigger SAP jco, if not it will trigger stop transaction(i.e. In stop configure. link, mapped sql query success to TerminationMessage)
The issues is,
if i send 150 messages, its inserting all records in DB but in the transaction it triggering 100 messages to SAP Jco through condition after that its triggering stop action block. I don't no why its happen.
In condition i have kept
confg. object as 1 and radio button with or
Confg link as sql query success with input1 propertie
Any idea regarding this, why its triggering after sometimes even its successful executed.
Thanks,
Kind Regards,
Praveen Reddy M

MESSAGE monitoring for PI (process integration) in rfc queves

Similar Messages

Maybe you are looking for