Message monitorng Data base overview

Hi
In message Monitoring threre are three option in From 1. data base 2. database(overview) 3. archive
but when i selected the Database(overview) i cant view any message ...
How to solve that
venkat

Hi Venkat
What is the support pack level of your PI system?
I am not able to view option database(overview) in PI SP 15.
Thanks
Sai

Similar Messages

Where can get IDOC Error Message from Data base tables

Hi ,
i am automating idoc checking process,in which i am getting control record from EDIDC tables,now i need to fetch Error message
using this idoc no.
How can fetch error message text ?
Thanks in advance.
Regards
sarath

Hi its a structure, it doesnt store data.
Take it from the table specified,
Pass STAMID,STAMNO,STAPA1,STAPA2,STAPA3,STAPA4 to function module MESSAGE_PREPARE and you will get the message text.
Also check the function module IDOC_READ_COMPLETELY

Entourage error message 4362 - damaged data base - cannot back up , compact

I've been using 10.5.8 on my G5 for 2 yrs NO problems - THEN - error message 4362 starts to appear as Entourage (2004 Office) gets close to 1.5G bytes. Disk utility can run and verify YES there is a damage in data base.
BUT the rebuild option will NOT last more than 30secs before I/O error.
I have tried to open Entourage with option key down and I have thrown out any email older than 1yr.
Next move is to re-install Entourage - and import folders - unless some one has a better idea/solution. Please -- Ray

Hi Ray,
http://www.entourage.mvps.org/error/number.html#error4362
See if the above helps before you remove and then re-install MS Office.
Da Vinci

Evert ime i close a pdf i get the following message - rthe orgnizer data base is damaged and will be reset the next time acrobat is launched but after relaunching i still get the same message

every time i close a pdf i get the following message - the orgnizer data base is damaged and will be reset the next time acrobat is launched but after launching
i still get the same message

You must be using an old version of Acrobat as Organizer hasn't been in the last two versions of Acrobat. Here is the KB that covers that old error: Error "The Organizer Database is damaged and will be reset..." | Acrobat 9

Data Base is corrupt message when Installing CS4 web premium unto new computer

Just purchased a new HP desktop running Win7-64bit and when attempting to load CS4 I keep getting an error message indicating that "Installer data base is corrupt", and to contact Adobe Customer Service. I already have it installed in another HP DT running Win7 64bit so I don't believe the new machine could be the problem... any suggestions?

I'm having a very similar issue and it seems to me that absolutely no one knows anything about this and/or are willing to help. They've given me some advice but nothing has helped and when I ask more questions for specifics they won't respond.

Change the messages commig from the Data Base

Hello,
My question is because I want to change the messages commig from the Data Base that reach the web bowser, that is, I have some Check constraints defined on the tables, but when on the web the user try to make something that violate the constraint, on the top of the page is displayed a message like "???? SYS_C00164048 ????".
I like to change that message to display something moer descriptive. How can I do that?
Thanks

Hi Chris Muir has a detailed blog entry on this->
http://one-size-doesnt-fit-all.blogspot.com/2007/05/dont-constrain-yourself-displaying.html
Brenden

Keep getting "not responding" message, extremely slow, have tried rebuilding data base, tried removing and re-installing. Still the same

keep getting "not responding" message, extremely slow, have tried rebuilding data base, tried removing and re-installing. Still the same

Do you use McAfee anti-virus software?
If yes, please read:
* https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee
Is this an Imap mail account?
if yes, you can choose to only synchronize the most recent of emails instead of a whole folder.
see info :
* https://support.mozilla.org/en-US/kb/imap-synchronization#w_configuring-synchronization-and-disk-space-usage
Make sure you compact folders on a regular basis to remove all 'marked as deleted' emails.
Tools -> Account Settings -> Server Settings -> Clean up ("Expunge") Inbox on Exit will compact the Inbox folder when you exit Thunderbird. If you check "Empty Trash on Exit" it will also empty and compact the Trash folder when you exit.

Transfer of xml file elements to data base columns

hi all,
i have to store xml file's data(element values) into the data base(table columns).
i heard that we can acheive this by XSU.
IS it is mediator between xml and db? if yes how to install it.
i tried something as below
with t as (
select xmltype('<Message-Header>
<Message-Id>1234</Message-Id>
<Sender-Company-ID>4569</Sender-Company-ID>
<Sender-Company-Name>abc company</Sender-Company-Nam
<Sender-User-ID>AA</Sender-User-ID>
<Recv-Company-ID>050</Recv-Company-ID>
<Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
<Creation-Time>20101019 15:59:39</Creation-Time>
</Message-Header>') as xml from dual
)but i am getting following error. can anybody explain about this
SQL> ed
Wrote file afiedt.buf
1 with t as (
2 select xmltype('<Message-Header>
3 <Message-Id>1234</Message-Id>
4 <Sender-Company-ID>4569</Sender-Company-ID>
5 <Sender-Company-Name>abc company</Sender-Company-Name>
6 <Sender-User-ID>AA</Sender-User-ID>
7 <Recv-Company-ID>050</Recv-Company-ID>
8 <Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
9 <Creation-Time>20101019 15:59:39</Creation-Time>
10 </Message-Header>') as xml from dual
11* )
SQL> /
with t as (
ERROR at line 1:
ORA-01041: internal error. hostdef extension doesn't existPlease help me..
my db version is Oracle Database 10g Release 10.2.0.1.0 - Production

Hi,
What are you trying to achieve with a single WITH clause and no SELECT?
Please see this from the documentation if you want to use it properly :
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#i2077142
Apart from its true purpose of subquery factoring, the WITH clause is often use here and there to simulate a table content, but you'll always need a SELECT.
Maybe that's what you were trying to do?
As for your question, starting with release 10.2, Oracle provides XMLTable to shred XML documents into relational structures.
For example,
with t as (
select xmltype('<Message-Header>
<Message-Id>1234</Message-Id>
<Sender-Company-ID>4569</Sender-Company-ID>
<Sender-Company-Name>abc company</Sender-Company-Name>
<Sender-User-ID>AA</Sender-User-ID>
<Recv-Company-ID>050</Recv-Company-ID>
<Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
<Creation-Time>20101019 15:59:39</Creation-Time>
</Message-Header>') as xml from dual
select x.*
from t,
 XMLTable(
 '/Message-Header'
 passing t.xml
 columns
 message_id number path 'Message-Id',
 sender_company_id number path 'Sender-Company-ID',
 sender_company_name varchar2(30) path 'Sender-Company-Name',
 sender_user_id varchar2(30) path 'Sender-User-ID',
 recv_company_id varchar2(30) path 'Recv-Company-ID',
 recv_company_name varchar2(30) path 'Recv-Company-Name',
 creation_time varchar2(30) path 'Creation-Time'
 ) x
;If you're working in PL/SQL, and the XML resides in a variable, you can directly do (with necessary datatype conversion in the SELECT) :
insert into your_table ( <your_columns_list> )
select <your_columns_list>
from XMLTable(
 '/Message-Header'
 passing your_xml_var
 columns
 message_id number path 'Message-Id',
 sender_company_id number path 'Sender-Company-ID',
 sender_company_name varchar2(30) path 'Sender-Company-Name',
 sender_user_id varchar2(30) path 'Sender-User-ID',
 recv_company_id varchar2(30) path 'Recv-Company-ID',
 recv_company_name varchar2(30) path 'Recv-Company-Name',
 creation_time varchar2(30) path 'Creation-Time'
 ) x
;

How to stored data after clicking checkbox in data base table

REPORT ZT .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
 mblnr LIKE mseg-mblnr,
 matnr LIKE mseg-matnr,
 werks LIKE mard-werks,
 lgort LIKE mard-lgort,
 lgpbe LIKE mard-lgpbe,
 charg LIKE mseg-charg,
 bwart LIKE mseg-bwart,
 budat LIKE mkpf-budat,
 menge LIKE mseg-menge,
 meins LIKE mseg-meins,
 kostl LIKE mseg-kostl,
 aufnr LIKE mseg-aufnr,
 rsnum LIKE mseg-rsnum,
 endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
 smatnr FOR mseg-matnr MODIF ID m2,
 swerks FOR mard-werks MODIF ID m3,
 slgort FOR mard-lgort MODIF ID m4,
 slgpbe FOR mard-lgpbe MODIF ID m5,
 scharg FOR mseg-charg MODIF ID m6,
 sbwart FOR mseg-bwart MODIF ID m7,
 skostl FOR mseg-kostl MODIF ID m8,
 saufnr FOR mseg-aufnr MODIF ID m9,
 srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
 pse RADIOBUTTON GROUP radi,
 bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*& Form get_data
 Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
 msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
 JOIN mkpf ON msegmblnr EQ mkpfmblnr
 WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
 Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
 t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
 w_comm TYPE slis_formname,
 w_status TYPE slis_formname,
 x_layout TYPE slis_layout_alv,
 t_event TYPE slis_t_event,
 t_fieldcat TYPE slis_t_fieldcat_alv,
 t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
 1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
 2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
 3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
 4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
 5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
 6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
 7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
 8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
 9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
 10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
 11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
 12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
 13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
 14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 i_callback_program = V_REPID
 it_fieldcat = t_fieldcat
 is_layout = x_layout
 it_sort = t_sort
 i_callback_pf_status_set = w_status
 i_callback_user_command = w_comm
 i_save = 'X'
 it_events = t_event
 i_grid_title = w_title
TABLES
 t_outtab = t_data
EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
 Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
 t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
 x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
 Sets the events for ALV.
 The TOP_OF_PAGE event is alredy being registered in
 the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
 Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
 t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
 Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
 p_outputlen p_noout
 p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
 p_hotspot p_showasicon p_checkbox p_edit
 p_dosum
 t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
 wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
 wa_fieldcat-ref_tabname = p_ref_tabname.
 IF p_ref_fieldname EQ space.
 wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
 ELSE.
 wa_fieldcat-ref_fieldname = p_ref_fieldname.
 ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
 wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
 wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
 wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
 wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
 wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
 wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
 wa_fieldcat-INPUT = 'X'.
 wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
*& Form top_of_page
 Called on top_of_page ALV event.
 Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 i_logo = 'TRVPICTURE04'
 it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
 Called on user_command ALV event.
 Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
 IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR. " U CAN DELETE
SY-MSGV2 = WA-MATNR. " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888' " U CAN DELETE
 WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
 INSERT ZTABLE.
 ENDIF.
endloop.
ENDCASE.
ENDFORM. "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.

Hi Lakshmi,
 Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...

How to use Add Query Criteria for the MySQL data Base in Netbeans ?

How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.

*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM

How to trigger pop-up window in report and update data base from report

Hi All,
I have a requirement, in a report output list to trigger a pop up window with some rejection codes corresponding to each sales order when i select from the output list. Also i need to update data base by selecting one of the rejection code in the pop-up window list for that sales order. Can any one please let me know how to achive this.
Also, i have check boxes for each record in the output list. Also, i have added one more check box as "Select All'. When select 'Sleect All' check box , all check boxes need to be checked, how to achieve this. PLease let me know.
Thanks in advance.
Regards,
Rajesh

Hi check this code of editable ALV report... I updated the data base with the changes made..in the editable ALV
*& Report ZJAY_EDIT_ALV
REPORT zjay_edit_alv.
* TYPE-POOLS *
TYPE-POOLS: slis.
* INTERNAL TABLES/WORK AREAS/VARIABLES
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.
* FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.
* SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c DEFAULT 'MARA',
lines(5) TYPE n DEFAULT 7.
* START-OF-SELECTION *
START-OF-SELECTION.
* Storing table name
p_table = tabname.
* Create internal table dynamically with the stucture of table name
* entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.
LEAVE TO LIST-PROCESSING.
ENDIF.
* Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>.
SORT i_fieldcat BY col_pos.
* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS.
REFRESH <dyn_tab_temp>.
* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form SET_PF_STATUS
* Setting custom PF-Status
* -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'. "copy it from SALV func group standard
ENDFORM. "SET_PF_STATUS
*& Form user_command
* Handling custom function codes
* -->R_UCOMM Function code value
* -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>.
CASE r_ucomm.
* When a record is selected
WHEN '&IC1'.
* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex.
IF sy-subrc = 0.
* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.
* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
* Make all the fields input enabled except key fields
w_field-input = 'X'.
MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL.
ENDIF.
* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.
* If the record is changed then track its index no.
* and populate it in an internal table for future
* action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF.
ENDIF.
* When save button is pressed
WHEN 'SAVE'.
* Sort the index table
SORT i_index.
* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index.
LOOP AT i_index.
* Find out the changes in the internal table
* and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF.
ENDLOOP.
* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
REFRESH <dyn_tab_temp>.
* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table.
ENDIF.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command

SAP QUERY -logical data base ADA

I have created a SAP Query with logical data base ADA,I have selected four tables in it.Do i need to link these tables if yes..where and how?The report is for fields in asset master data.
.But i get below error when i try to genaret the output :
Fields from parallel tables within a line
Line: 01
Field: Asset description
(ANLT-TXT50, table ANLT)
Field: License plate no. of vehichle
(ANLZ-KFZKZ, table ANLZ)
i get such similar five messages but they are warning..when i execute with warning however i get the fields with description but not with Value.Ex:i get asset description and not Asset number as required.

You don't have to link them, they ar linked that is the power of a logical data base
To get the text in your report you need the key fields
Like
(Lanque Key)
company code
asset number
Asset sub number
Go to info sets and look to the standard ones like /SAPQUERY/AM01

How to execute data base view in sender communication channel ?

hi experts
how execute data base view in sender communication channel.?
when i execute select * from data base . ( Its working)
When i execute select * from dbo.view (its showing error )
My Question is there any procedure or syntax execute the views in sender side . ?
Thanks and Regards
G.Praveen Kumar

The Error showing
Database-level error reported by JDBC driver while executing statement 'select * from View_abcMap'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'View_abcMap'.'. For details, contact your database server vendor

Data base in microsoft office is damaged andI can't rebuild it. suggestions?

Hi
The data base for Microsoft Office 2008 has been damaged. I've tried twice to rebuild the data base, but it stalls after 2 hours and I'm forced to cancel. Very frustrating. The Office tools is a nice tool, but it's not working. I can use Word, Excel and PP but Entourage will not open at all. I've removed office and reinstalled and downloaded all of the updates. I still get the same message. If I have to start over, so be it, but I'm not sure how to completely remove Office. I removed it using Microsoft tools. (Positive reinforcement that I will always use Macs!) Any suggestions will be most appreciated.
Thanks,
Momo3

use time machine (if you have it on before all the errors in office) to restore the working files. if not you can use cleanmymac to remove all microsoft office program files and then reinstall office. Back up all your data before useing cleanmymac. it is a good app but it can clean too much some times if you do use clean my mac, open clean my mac click applications tab drag office apps from finder>applications not the dock and microsoft update as well. then click remove. it will remove all files that go with office (It wont remove Your document files) her is a link to a free trial of clean my mac http://macpaw.com/cleanmymac

Which data base tables contain SCM customer code

Friends,
I am writing an user exit for VA01/VA02/VA3/VA32.
I am getting the customer number from VBAK-KUNNR when I execute any of the above transactions.
According to functional sepecification, we can find SCM code in the data base table ADRC.
(we can fetch the data from ADRC table where ADRC-ADDRNR = KNA1-ADRNR; ( KNA1-KUNNR = VBAK-KUNNR))
I could not find SCM customer code in the table ADRC.
Please let me know the Data table and field to find the SCM customer code in SAP.

Hi Reddy,
 >> As in SCM the company codes exist in the table ' T001 '.
 Corresponding field for it is ' BUKRS '.
 >> U can use ' ADRNR ' as a key field in ' T001 ' table and
 relate with your KNA1- ADRNR using Joins for user exits.
Feel Free to ask any questions regarding this...
Hope it Helps...
Regards,
Dhayanandh.S
Message was edited by:
 DHAYANANDH SIVASANKARAN

Message monitorng Data base overview

Similar Messages

Maybe you are looking for