Message no 06067 "Scheduled quantity & &" greater than target quantity

Hi,
          I change the status of the message no 06067"Scheduled quantity & & greater than target quantity & &" from W to E. Than In Se38, the schedule quantity cannot be maintained greater than target quantity.
But in MRP Run, the message number does not work.
How to restrict higher qty then target qty created through MRP.
Thanks in Advance.
Ashish Panchal

Hi Ashish,
The Note 83343 should answer your question.
83343 MD01: No check of target qty in sched. agreemnt
As described:
"The planning run should run automatically and without interruption by some events.
The system makes a decision either in favor of the quota arrangement or in favor
of the source list. The system reads the scheduling agreement once in the update process.
To have a check on the target quantity would require another read of the document which
was determined to affect the system performance."
A maximum quantity can be considered by means of the quota arrangement. A modification exists which will allow for a check of the maximum quantity in the quota arrangement. The note contains more details on this.
Regards,
Purnima.

Similar Messages

  • VL    363 Delivery quantity is greater than target quantity 22.800 FT

    If I am using BDC to create outbound delivery then i am getting below error:
    VL    363 Delivery quantity is greater than target quantity 22.800 FT
    But if I am using BAPI to create outbound delivery, then i am not getting any message and delivery is being created but includes only those items for which delivery qty is less than below order qty. I want to have error message in case of BAPI also.
    What is the solution? Is there any enhancement of function module available to have this message.
    Regards,
    Vijay

    Dear VIjay,
    Are you using contract has reference to create the delivery, then below link could be of help.
    [Error Delivery|Error: Delivery quantity is greater than target quantity]
    Thanks
    Murtuza

  • Delivery quantity is greater than target quantity

    Hi ,
    I am getting a warning  massage "delivery quantity is greater than target quantity" while running picking in back ground .Here a would like to inform you that we have created a Z program which which makes the picking in background against the input of Barcode number.But the problem is if we make that the same entry in VL01n it is not showing any problem.But we are using same thing means VL01n by BDC and this massage comes from SAP ...ABAP-ers have nothing to do with this .Can u tell me why i am getting this massage .
    thans and regards,
    Abhijit Duttta .

    Dear Friend,
    There Must be some problem with your BDC while entering DATA in the feilds.
    In doing Picking if the Quantity is entered more than the quantity to be delivered the message flashes.
    Just check for your self in the feild mapping in the BDC program by SE38 TC
    and also Check for the Flat File where you are entering data.
    Try and test with one Transaction in foreground and if it is successful then only go for background process.
    edited by ,
    Amlan Sarkar

  • Maintaine error message if posting date is greater than Sch del date in PO

    I have maintained a delivery schedule in a PO for a material
    Say PO qty 100
    Del Schedule
    10.04.09  - 60
    20.04.09 - 40
    While GRN, for 60 qty, if posting date is greater than 10.04.09, system needs to throw error.
    I want to do it for selected materials only.
    Is there a way to do this.
    Regards,
    Rakesh

    Thanx for reply
    If I use OMCQ message , it will be applicable for all GRNs and I want for a particular set of materials.
    Can one please suggest User exits / BADi for the same. I have checkd BADIs but those are based upon MSEG and EKBE table.. and i dont have any material doc no before posting the document.
    requiement is to check the delivery sch date and posting date befor posting the document is posted.
    Any suggestions welcomed.
    Reagrds,
    rakesh

  • Error in VL01N(Delivery qty is greater than target qty while taking return)

    Hi Experts,
    I am facing a problem "Delivery Quantity is greater than the target quantity" while doing the inbound delivery from VL01N t-code for sales returns with reference to return order.
    I am trying to do the inbound delivery for the same Quantity which is in return order but still it is showing error.
    I have checked my configuration and could not find any mistake under this process. I am not able to identify the error. In my delivery item category we have put "B" under over delivery check which is our business requirement.
    If I remove "B" from delivery item category, i am not getting any error in inbound delivery but which is not right way of doing.
    I could not find suitable query in SDN. Can any one please share your expertise to solve this problem?
    Thanks in advance,
    Regards
    Srinivas

    You have to check the following:-
    a)  whether for that return delivery, picking is not activated
    b)  whether customer master or material master is maintained for over delivery tolerance
    c)  whether in VD51, any overdelivery tolerance is maintained
    You can also have a look at the following notes:-
    1)  Note 151901 - Check of delivery quantity is consistent
    2)  Note 322588 - VLSP:incor.checks for qty to be delvrd during split
    thanks
    G. Lakshmipathi

  • Why do I get the message that download will take greater than 12 HOURS with a high speed connection?

    When trying to download the free version of Firefox the time shows as "greater than 12 hours". The download can not be achieved then with a satelite connection - it will exceed download allowance. Can not even get started.

    Hi,
    Welcome to the    Discussions
    So we have DSL Modem <-> Base Station <-> Computer connected by Ethernet.
    Is the Modem Routing ?
    Is the Base Station set to "Share An IP" ?
    (i.e are there two DHCP servers on your LAN ?)
    Is Internet Sharing On in th G5s System Preferences > Sharing pane ?
    In the Base Station is Port Mapping Protocol Enabled if it is doing routing ?
    It is in the NAT tab of the Internet Pane.
    Is the G5 also doing WiFi to the Base Station ?
    Also check the Modem is not Blocking PINGS as this log shows no PING (But I am not sure it even got that far)
    7:45 PM Thursday; February 18, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • F-32 Partial payment amount greater than net amount

    Hi Experts,
    We have recently a problem in clearing up payments in F-32. When we double-click the item under Partial Payment Tab, the warning message displays "Partial payment amount greater than net amount" then the value in the Payment Amount Column becomes negative. The users need to activate 2 separate entries for partial payment but instead of . How can we do this?
    We have to post like this in partial payment under same customer:
    20090820     1400005790     DZ     19     20.08.2009     20.08.2009     5,000.00-     1,295.12
    20110225     1400010330     DZ     19     25.02.2011     25.02.2011     2,000.00-     1,295.12-
    So the the Assigned Value should be zero to post.

    Thanks @Atif. Ok so now I understand that the "Total Difference Posting" amount inf-32 will create the new amount of the residual payment with Document Type AB.
    Now with the Warning Message "Partial Payment Amount greater than the net amount", this is in a overpayment amount that is reflected in transaction F-32, here are the entries:
    Assignment  Doc Num      Doc Type      Post Key    Net Amt         Partially Paid Amt Payment Amt
    2133004220     90005448     RV     01     3,707.02      3,305.71      401.31
    2133015007     90020098     RV     01     7,836.68      6,737.25      1,099.43
    2133016757     90022362     RV     01     10,521.31      8,603.87      1,917.44
    2133137046     90187172     RV     01     11,367.68      0.00      11,367.68
    2133137047     90187173     RV     01     1,354.09      0.00      1,354.09
    2133137048     90187174     RV     01     1,739.82      0.00      1,739.82
    2133137049     90187175     RV     01     994.57      0.00      994.57
    20110419     90187176     RV     01     6.42      0.00      6.42
    20110421     90187177     RV     01     44.94      0.00      44.94
    20110425     90187178     RV     01     19.26      0.00      19.26
    20081216     1400003657     DZ     19     3,421.86-     3,394.04-     27.82-
    20081222     1400003706     DZ     19     1,000.00-     1,033.17-     33.17-
    20090310     1400004396     DZ     19     420.51-     401.25-     19.26-
    20090630     1400005319     DZ     19     786.13-     705.94-     80.19-
    20090702     1400005349     DZ     19     596.04-     535.88-     60.16-
    20090820     1400005790     DZ     19     5,000.00-     6,295.12-     1,295.12-
    20090824     1400005827     DZ     19     308.16-     295.32-     12.84-
    20091027     1400006377     DZ     19     400.72-     375.04-     25.68-
    20091215     1400006796     DZ     19     349.89-     337.05-     12.84-
    20100608     1400008253     DZ     19     200.09-     189.39-     10.70-
    20101019     1400009279     DZ     19     165.85-     155.00-     10.85-
    20101019     1400009280     DZ     19     254.65-     238.00-     16.65-
    20101019     1400009281     DZ     19     160.64-     157.00-     3.64-
    20101130     1400009595     DZ     19     10,000.00-     5,440.92-     4,559.08-
    How is this possible that Document numbers 1400003706 and 1400005790 has overpaid amount. And both of them are downpayment documents? Is there any way I can clear them with the Invoices, I am also lost with this kind of scenario?

  • How to restrict the delivery quantity not more than target quantity?

    Dear Gurus,
    How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
    1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
    2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
    Any other effective method? Please advice. Thanks.
    Regards,
    David

    Dear all,
    It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
    I think there must be somewhere besides of those you menetioned.
    I notes that SAP help for the overdelivery tollerance setting of scheduling agreement: 
    Overdelivery Tolerance Limit
    Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
    Dependencies
    If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
    Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
    Pls help! Thanks.
    Regards,
    David

  • Schedule line getting confirmed when Ordered Quanity is greater than stock.

    Hi Sap Gurus,
    We have an issue in one of the sales scenario.
    In one of the sales orders the ordered quanity is purposely maintained greater than the stock at respective storage location(batch managed).
    In this case the schedule line should not get confirmed and it should not allow delivery document creation.
    But in the sales order the schedule lines are geeting confirmed and even the delivery document is getting created with picking request completion.
    Could you please help to understand :
    1.  why the schedule lines are getting confirmed when ordered quantity > Inventory?
    2. How do I stop delivery document creaton in this scenario?
    Looking for a quick response.
    Thanks in advance,
    Bhaskar

    Hello Bhaskar,
    Is Availability Check in your system considering Replenishment Lead time, if yes, then this is possible.
    Check this IMG Link:
    IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Availability Check with ATP Logic or Against Planning - Carry Out Control For Availability Check
    Here check the RLT settings.
    Also check settings under In/Outward Movements, where things like include Purchase Order can lead to confirmation of stock in Sales Order, despite physical inventory being present.
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • Scheduling Line qty greater than the Scheduling agreement qty

    Hi Experts,
    1. I have a scheduling Agreement (SA), and the qty mentioned against this SA is 1000 (say).
    2. Now when i generate schedule lines for this SA (ME38), I am allowed to schedule more than the quantity that's mentioned in the SA.
    3. Please advise, is it possible to restrict this behaviour. i.e. I want to give an error message if the Schedule Line qty exceeds the SA qty.
    Please advise. Very urgent.
    Regards,
    Manju.

    Hi Manju,
    Yes its possible to restrict the case as u mentioned.
    Check the below settings:
    IMG-MM-Purchasing-Environment data- Define Attributes for system messages
    go to meassage no : 00-06-067 set it as Error message.
    U'll achieve ur result.
    Award points if its helpful
    Sangram

  • System doesnt let me change the delivery quantity greater than sales order

    Hi,
    In delivery document , when I change delivery quantity greater than related sales order quantity , system just show the Message no. VL363 but let me change the quantity.
    Is it any way that system do not let me to change delivery quantity greater than its related sales order?
    thanks.
    Lida.

    Is it any way that system do not let me to change delivery
             quantity greater than its related sales order?
    Go to zeroVLP,  select the item category and maintain "B"  for the field  Check overdelivery

  • Invoice quantity greater than PO quantity (item without GR)

    Dear All,
    I want a restriction in Import PO where system should give error message when Invoice quantity is greater than PO quality ( and GR is not posted).Following setting has been done but still system is issuing any error or warning message.
    1) Set System Message M8 087 as a Error in column online and BatchI in transaction OMRM.
    2) In OMR6 for tolerance key DQ (Exceed amount: quantity variance) set upper limit zero (check limit) in val and %.
    3) In MM-Inventory Management & Phy Invt.u2014Goods Receiptu2014Set tolerance Limit (OMC0)--for B1 and B2 (Order price qty variance (GR) / E and W message Upper limit is set as zero.
    Please guide me where i am going wrong or need any other setting?

    There is no tolerance key which compares the quantity/amount of the purchase order with the quantity/amount of the invoice.
    This is the standard system design.
    In the SAP standard release, the system checks the price and quantity variances on the basis of the default values for the goods
    receipts. As a result, we can post invoices although the amounts and quantities in the invoice items are greater than the amounts and quantities in the corresponding purchase order items.
    If we want the amounts and quantities for the purchase order items to be included in the tolerance check, we can use a customer enhancement (BADI) in the 'MRM_BADI_INVOICE_CHECK' function module to run the check on price and quantity variances based on the amounts and quantities from the purchase order item.

  • PO Quantity Greater Than SC Quantity?

    Hello Experts,
    I've created Local PO at SRM based on sourcing process, which came from SC. Somehow, I edited the quantity of PO greater than SC and SRM didn't throw error message. As we know, if we do the same thing at ECC (PR to PO) then error message will appear and tells us that the requirement has been ordered in full quantity.
    Is it how the standard SRM works, without quantity checking against already ordered item for related SC?
    Basically, we want to create PO from more than one bid.
    Appreciate your helps.
    Sincerely,
    Ted

    Hi Jason,
    Yes, it's obvious that we can change subsequent PO, including quantity. But the problem is how can the quantity be greater than the SC quantity? Beside, we can't control required quantity vs ordered quantity
    This will lead to ordering the unnecessary materials.
    Thanks,
    Ted
    Edited by: lastlegion on Nov 8, 2011 1:23 AM

  • Scheduling not possible; duration cannot be greater than interval

    Hi,
    i am runing one yard management scenario.When i am trying to schedule the activity of a vehicle in yard monitor system showing the message "Scheduling not possible; duration cannot be greater than interval
    Could you please help in this regard?
    Sandip

    can you tell me which version it is >
    i try to fix in dtexec
    getting following error :
    Started:  2:02:13 PM
    Error: 2015-01-30 14:02:14.68
       Code: 0xC000F427
       Source: Member Eligibility
       Description: To run a SSIS package outside of SQL Server Data Tools you must
    install Member Eligibility of Integration Services or higher.
    End Error
    Warning: 2015-01-30 14:02:14.69
       Code: 0x80019002
     Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.  The Execution
     method succeeded, but the number of errors raised (2) reached the maximum allow
    ed (1); resulting in failure. This occurs when the number of errors reaches the
    number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
    rrors.
    End Warning
    DTExec: The package execution returned DTSER_FAILURE (1).
    Started:  2:02:13 PM
    Finished: 2:02:14 PM
    i cannot upgrade original package

  • Error Message FF747  -The tax amount must not be greater than the tax base

    Hello,
    We are attempting to post an import vendor invoice through transaction    FB60 for Israel company code . Since the tax charged by the vendor is not fixed every time , we are entering the tax amount in the    FB60 screen manually , without selecting 'calculate tax'.The amount of tax is greater than the amount of expense as per the real business scenario. For example amount of expense is 100, amount of tax is 200 and the total amount charged by the vendor is 300 .However when we simulate the posting we get an error - The tax amount must not be greater than the tax base-Message no. FF747
    We tried putting a very high percentage in the tax code also but it didn't help
    We would like to go ahead with this posting. Could you pl throw light on the same . ? Is there any way (OSS note ) or a work around which can resolve the issue ?
    Best Regards
    Amit  Kulkarni

    Hello
    This may be  a work around in other cases , but since we want the amount to be updated in the BSET table for further VAT reports , we would like  this to be posted along with the expense item

Maybe you are looking for