Message no. AA683 - Incorrect depreciation run for month 01

Hi fellows, I need some help. During a depreciation run execution, for testing purposes, it was noticed the system was not configured for a legacy data transfer at June 30th, 2014, but the depreciation was executed in a real mode. After that a new configuration was made for the month 06/2014.
When we executed a new depreciation run an error message " AA683 - According to posting cycle, you should post period 002 next." was disclosed.
Is it posible to reset the table TABA to tun the next depreciation for the correct period? July/2014? Or now we have to execute for each month until reach the correct one?
regards
Andrea

Hi Andrea,
Yes of course you can reverse the depreciation posted, please understand how system behaves.
...system calculates the depreciation to be posted according to the depreciation keys and depreciation start date. and shows as an accumulated depreciation.
...while posting depreciation values gets posted to our depreciation accounts from accumulated depreciation.
...If after this any change is made in the configuration such as AFAMA OAYR ect, the system by itself will adjust the values to be re posted and shows as a negative or positive accumulated depreciation according to the configuration impact.
.... to post correct values now, run AFAB in repeat run mode and post the values.
... The values will get corrected
Thanks and Best Regards
Rohit Bali

Similar Messages

  • Depreciation run For Period 2

    Dear All,
    Currently am configuring a simple scenario of asset configuration fop book depreciation
    i have done the depreciation run ( Both Test Run & Back ground Processing ) for the period 1 and the posting was done successfully
    when i went for the depreciation run for the 2nd period no documents are generated ( Tried Test Run ) and no error message is displayed
    Can any one help me solving this issue
    Regards
    Arun.R

    Run the report in test mode without Error Analysis and List assets on.
    When this not helps look to your asset if there is plaaned depreciation for period 2

  • Depreciation run for specific depreciation area

    Hi,
    In AA, we defined 2 depreciation area for all the assets class, one for local(01), another one for group(30). all the area will be posted to FI.
    according to requirement, we would like to stop specific depreciation area depreciation run for certain asset(not asset class). this means that for depreciation area 01, it will be work, but for 30, it should be stopped. may be 3 months later, this asset will be restart run depreciation for area 30.
    Would anyone know how to do that? thanks.
    Ben

    Hi
    Hope you have to change the Config settings then.
    Go to AO21 and select your screen layout and double click Field Group rules and under FG 18 you have Deactiv. area make this enrty optional and also select the check box MnNo.
    Save the entry.
    Come back to AS02,now the dep area will be available for deactivation.
    Good Luck
    Hari

  • Depreciation run for previous years

    Hi Experts,
    I am in Development system where the depreciation run has not been carried out since 2007 as per OAAQ. Now when I try posting depreciation for year 2008 period 1, it throws this error "You can only post in new year after closing previous year". However, 2007 is already closed.
    Again when I try to close the FY in AJAB, it throws this error "No year end close is necessary for co. code XXXX".
    Also, I don't find any table entries for TABA and as per table T093b 2007 is the closed FY.
    So, my question is how can I carry out the depreciation run for all these years to bring the system to current FY.
    Additional information you might require is OB52 is having period open from 1/2014 to 12/2016. and Planned ordinary depreciation has been carried out for some of assets till 2009 as I can see in table ANLC.
    Thanks in advance
    Regards
    Sukham

    Hi Sukham,
    ok, the problem is that you have values for the last posted in T093D, which may come from a legacy data takeover.
    You have 2 options right now:
    1) Implement and run the correction program from note 144441          
    2) Either clear or set the last posted depreciation period in the IMG for FI-AA legacy transfer to 12 (or use the correction program from note 26073)
    Regards,
    Markus

  • Depreciation run for Previous Year

    Hi all,
    I am trying to run depreciation for the previous year 2009.
    I tried the following:
    On AFAB I gave the year as 2009 and the period as 01, and checked the planned depreciation check box.
    Got an the following error:
    'Only an unplanned posting run is possible in this fiscal year'
    Then I selected unplanned run and ran the depreciation, still it was getting the another error
    saying you can only post to period 12.
    Then I changed the period to 12 and ran it and was able to run the depreciation fine.
    But now I want to run for the other periods say period 10 and period 11. and now I am getting the following error.
    ' Period 010 is already Posted'
    does that mean that we cannot run a depreciation run for a earlier period, if the latest
    period  is already run??
    If not how can I run it for the  other periods 10 and 11??

    Hi,
    You can only run depreciation for the 12th period only.
    Once 12th period's planned depreciation run was performed, then it is not possible to run any kind of depreciation with an earlier period number.
    But you can run the 12th period again in repeat mode, in case you have posted any back dated entries after the 12 period'a planned run with an asset values date, which falls before 12th period.
    Thanks,
    Srinu

  • Single depreciation run for multiple company codes

    Hi experts,
    How can I carry out a depreciation run for multiple company codes in one transaction? I thought about creating a variant and running a batch job but you can only select the run for one company code at a time. Am I missing something here. Kindly provide explanation of how this can be done.
    Thanks.
    Ben

    Use the program RAPOST2010. There is no transaction for this program, but you can create your own if necessary, for example ZAFAB.
    Please not that there is a separate forum for asset accounting.

  • Transaction F.5D send message a breakdown is already running for company co

    Whe I try to run the transaction F.5D send message A breakdown is already running for company code 1600 and I can't run again for this compnay code the calculate Balance Sheet Adjustment on other  hand  I see in standar table RF180 that the process in not finished since 1 day what i have to do to finish this run created?
    Thanks!
    Edited by: Otoniel Trevino on Oct 30, 2008 12:53 AM

    Hi,
           Check the Transaction Code : SM04 if still the t.code F.5d is running terminate that, or ask BASIS consultant to terminate the run.
    Regards,
    SudhaReddy.

  • Depreciation run for left out periods

    Dear Friends,
    For the FY 2008, the depreciation run has been completed till period 8.  Now from period 9 to 12 i have to run depreciation.  Please help me out to find out how can i do so. 
    Which peirod should i input in posting period field and which radio button has to be activated (ie. planned posing run,  repeat,  restart, or unplanned posting run) in tcode AFAB. 
    Now i want depreciation amount to be reflected into each and every month respectively. ( ie. sep, oct, nov, and dec) instead of all amounts to be posted into single month say dec.
    Thanks and Regards,
    Payal

    please search or read the documentation first.  this has been covered 9,452 times before.

  • Depreciation run for legacy assets

    Hello,
    This is the first depreciation run in SAP for the month of April 2007.
    System is posting depreciation for those assets procured during the year i.e purchased in April but not posting for legacy assets i.e assets uploaded from legacy.
    Regards
    Sreekanth

    Hi Murali,
    Our Fiscal year is betyween April and March. Depreciation for legacy assets has been uploaded till the month of March 2007.Planned depreciation is getting displayed in the asset explorer under Fiscal year start column.
    Hope u were looking for this info.
    Regards
    Sreekanth

  • Error in Depreciation run for 7 th period

    Hi Guruu2019s
    When we run depreciation run  year 2008 for period 7 has failed with the following error :
    Account 'Accumulated dep. account unpl. deprec.' could not be found.
    however it has posted to few assets and not posted to few assets, when I checked in the log for posting run there is a message saying that u201Cthere are error in the posting run.after correcting, restart the run.
    u201C2documetns were createdu201D
    If I go to previous log for posting there is no error message and it says with green signals that 3 documents were created. From 1 to 6 periods, in every log says that 3 document were cresated
    Only this particular run says 2 documents were created.
    Any advise?
    Thanks in advance
    Regards
    Sunitha,

    It looks like that in period 7, you do the first "unplanned depreciation". That's explain why the error only happen in period 7.
    The problem happens because GL account for "unplanned depreciation" is not created.
    Try to check in t-code : AO90 => Choose your Chart of Account => Choose Account determination for asset class in which you did the unplanned depreciation => Choose Depreciation => Check all GL accounts assignment in "UNPLANNED DEPRECIATION ACCOUNT ASSIGNMENT".
    Then check in t-code :FS00 whether the GL Accounts (in "UNPLANNED DEPRECIATION ACCOUNT ASSIGNMENT) are exist or not.
    If the GL accounts are not exist then you should created the GL accounts first. Afterwards, try to running the AFAB again using "Restart".
    Good luck.

  • Depreciation Run for closed fiscal year

    Hi All,
    We bought some assets on 2005 through direct purchase and these assets are in under operation, but not having the asset master record in the SAP system.
    Now we have decided to bring these assets into the system as the capitalised date is 10 Nov 2005 and for this purpose, we had created the asset master record and applied the t.code: ABNAN to post the values to these assets.
    <b>"My concern is about how to provide the depreciation run to these assets for the closed fiscal year from 2005 to until Nov 2007.The present closed period in the production system is 2006".</b>
    I request you to all kindly give your values on the above mentioned issue.
    Thanks with regards,
    Ran

    Hi
    Just give the dep start date as 10 Nov 2005 and run the dep for the current posting period the depreciation will get posted for the year 2005 and upto the current period,in the current posting period.
    As the past reriods are all closed you cannot post dep in the year 2005.
    You will have the whole dep for that particular asset posted in the current posting period.
    Hope this helps
    Good Luck
    Hari

  • Depreciation run for Business area

    Hi all
    We design some business areas are belong to 1 company code.IF each BA want to depreciation run by itself
    How to depreciation run independent for each BA. If anyone know it, please teach for me.
    Thanks all
    Tora86

    Thanks Sridevi
    I know that depreciation run at companycode level. But my project have some difficult problems, So I want to find way depreciation run at BA level. we can config or customize anything?
    Thanks all
    Tora86

  • Depreciation run for each business area

    Hi all,
    In case all business areas are belong to 1 company code.
    So how to run depreciation for each business area separately?
    I mean business area A can run depreciation for itself, and not affect other business areas in the same company code.
    Any suggestion would be highly appreciate!
    Thanks in advance any help!
    HuyenTT

    no, this is not possible, as the depreciation run needs to be executed for the whole company code.
    Blaz

  • Depreciation run for one asset

    Hi gurus,
    can we run depreciation only for one asset. I am trying to run depreciation for one asset for testing purpose but system is picking more than one

    Hi,,
    Go to AFAB and select following.
    Select 1. company code
                2. year
                3. period
                4. planned posting run  radio button
    Deselect
             1. list assets check box
    After u have to give asset number which u want to run  depreciation in Main asset number field
    Regards,
    R.N.Reddy

  • Posting an unplanned depreciation run for the previous period

    Hi SDN forum,
    May I just ask if it's possible to run an unplanned posting run for a previous period wherein the depreciation run has already been executed?
    The scenario is more like a "repeat unplanned posting run"
    I can't seem to include this unplanned depreciation whenever I select the repeat run for the previous period.
    Please help.
    Thanks

    Hi
    Through T.Code: ABAA  you can able to post unplanned dep for previous period.
    Executing AFAB for previous
    1 - open FI Periods (OB52)
    2 - Post Unplanned Dep T.Code: ABAA
    3 - Run AFAB with Repeet run & Test run
    you feel it is ok with test run execute production run
    Regards
    Viswa

Maybe you are looking for

  • Ios7 - how can i delete queued downloads in itunes?

    Ios 7.0.3 ipad 2 This seems to be a constant problem with itunes on the ipad but there still does not seem to be a clean fix offered by apple. I have 50 downloads sitting in my download queue in itunes which i want to delete since they are episodes o

  • Mass Deletion of Unprocessed PO outputs

    Hi All, Is there any report or transaction where I can delete the outputs of PO that are not yet processed (which are in Yellow status). Its not possible in ME9F. Regards, Shashidhar

  • There is no option to save,create or discover any php file

    This just started today 22/06,but there is no option to create a new php file,the options to create all types of files except php show on main screen,there is no discover dynamic files showing in bar,i can still type in the browser to view the php fi

  • Converting Date (Gregorian - Hijri)

    Can anyone please help me to convert date from Gregorian method to Hijri and vise-versa..Is there any built-in localization support in java to achieve it? otherwise, work-around solution please... -micro.man

  • Should I exchange my new MacBook Pro for the newer MacBook Pro?

    I have just recently purchased a 15" MacBook Pro. Well...4 days later I receive an email letting me know that they have just improved the processor and battery life of the 15" and 17" MacBook Pro. I called to complain that I had just purchased the co