Message no :amoc001 the system couldnt automatically create a transfer docu

hi,
message no :amoc001 the system couldnt automatically create a transfer document
hi all when i follow the steps in this link Message no. AMOC005 i just end up with the problem above
when i tried to change the business area normally the system automatically transfers the amount. but in this asset und. const.
i got this error the system couldnt automatically create a transfer document

Dear Friend,
SAP clearly says in the long text of the error message that it is not possible, please transfer to new assets, please see the long text as under:
NA AMOC001
Short Text
Automatic transfer is not possible for asset &1
Diagnosis
You changed assignments to organizational units for asset . The indicator for 'time-independent organizational units' is set for this company code in Asset Accounting Customizing. This means that the system is supposed to create a transfer document automatically.
However, asset manages one of the following:
Open items
Investment measures
Down payments
Therefore, the system could NOT automatically create a transfer document.
System Response
The master data change is not saved.
Procedure
If you want to change the assignment of asset to business area or cost center, you have to manually transfer the asset to a new asset master record.
Hope this will resolve your issue.
Thanks & regards,
Murlidhar Khatri

Similar Messages

If changing the hostname of the Audit Vault Server version 12.1.2 please wait until the system reboots automatically.

Hi everyone
when changing the hostname of an AV Server in the newly released version 12.1.2, it can take up to 10 minutes from the time a user click ok on the pop-up message "Are you sure you want to reboot the Audit Vault Server for the changes to take affect" to the system actually shutting down for the reboot. The machine must not be manually rebooted as this will cause errors.
Some background information was provided by one of Oracle's developers for this product:
AVDF 12.1.2.0.0 uses Oracle Grid in Restart Configuration. This is needed to leverage the ASM infrastructure to create diskgroups etc. So, when a hostname of a system is changed, the entire Grid stack needs to be re-configured to work under the new hostname. This re-configuration is needed because Grid creates a lot of directories with the hostname in them and when the hostname is changed, it tries to look for critical configuration files under this new "hostname" and of course, they would not be present. Hence, when we change the hostname, an entire re-configuration of the Clusterware is attempted, at which point a new set of directories with the new hostname will be created by the Grid software.
This reconfiguration operation may take a few minutes to several minutes depending on the hardware/resource specs. This is because re-configuration of the Clusterware stack is a heavy-weight operation and takes time (It needs to shutdown all the CRS services and re-configure them and bring them back up). Hence, the long duration it takes before re-boot. You *MUST NOT* reboot it manually before the system automatically reboots -- otherwise the re-configuration operation will only be half-done. The chances of this re-configuration operation failing is very, very minimal (based on our tests). So, given enough time it _WILL_ complete eventually and the system _WILL_ automatically reboot. You just need to wait for it to happen.
Hope this will avoid any issues,
greetings,
Harm ten Napel

I may add it was my personal impatience that lead to this discovery: I was re-imaging my virtualbox install with the new 12.1.2 version (for testing purposes) and I want my AV server to be called 'auditvault', when it appeared nothing was happening (but there was) I rebooted the system manually with said results...

How to make every account in the system login automatically?

How to make every account in the system login automatically when Mac OS X startup?
Thanks!

I can see one way to do it. You'll need to install a script in each user account, and have it set as a login item for each user. Let's imagine you have three user accounts. Each user in Mac OS X has a UID number. Normally your first user has the UID of 501, the second one will be 502 and so on...
You can determine the UID by running the following AppleScript while logged in on each user:
do shell script ("ID")
This'll return a long block of text, but right at the start you'll see the UID number. Let's assume your three users have the UIDs 501, 502 and 503. We begin with 501.
Create the following script and save it as an application while logged in as 501. Note that the password you're entering is the password for UID 502. Also note that the forum system is creating line breaks where there shouldn't be any. The long "do shell script" line should be one line.
delay 5 --This delay allows time for login to complete, but it may not be necessary.
try
do shell script "/System/Library/CoreServices/Menu\\ Extras/User.menu/Contents/Resources/CGSession -switchToUserID 502"
delay 5 --This delay could be shorter or longer, depending on how fast your machine is.
tell application "System Events"
keystroke "password for 502" --the password for UID 502
keystroke return
delay 1
end tell
on error
display dialog "Unable to switch user."
end try
Open System Preferences, go to Accounts, click "login items" and drag your script (saved as an application) to the login items window.
You basically repeat this process for each user account, modifying the script so it switches to the next user.
This isn't ideal, because your passwords will be stored in the scripts, and each user could open the scripts and learn the passwords of the other users on that machine.
I picked some of this up from a discussion over at the Macworld forums:
http://hints.macworld.com/article.php?story=20031102031045417
Message was edited by: The Preacher
Message was edited by: The Preacher
Message was edited by: The Preacher

Application messages are in the system log instead of the application log

Hi SAP GURUS.
The standard output is created from the outbound delivery .
All the messages are hitting the system log instead of the application log .
This is after the upgrade from 4.6c to ECC 6.0 .
Please provide the details how to move the log to the application log since the output is the standard output (SAP provided output type ).

verzunof wrote:
Hello,
My system.log is filled with these messages, they repeat every second.
Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncReceive::waitForDMA - context not going inactive.
Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncTransmit::waitForDMA - context not going inactive.
Do these messages indicate a problem? If so what that could be problem and the solution?
Can this contribute to the sleep/wakeup problem when iMac won't wakeup after being put to sleep manually and not sleeping according to Power Saving settings?
Thanks a lot.
verzunof wrote:
I'm not certain if those messages indicate a power issue but you can try *resetting the System Management Controller* and see if that helps. Here's how: http://support.apple.com/kb/HT1806
"The System Management Controller (SMC) is a chip on the logic board that controls all power functions for your computer. If your computer is experiencing any power issue, resetting the SMC may resolve it. The SMC controls several functions, including:
Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
Handling system resets from various commands.
Controlling the fans."
Carolyn

The system could not create any outputs for mv type 561

Hi,
I tried to print out a goods receipt others in MIGO and i received "The system could not create any outputs" when i tick on output control. I tried to follow the steps in How to print the material document in MB1C movement 561 I stuck at step 4 where i cannot find MvT 561. Please help
Chk your setting as below to get GR print out.
. Maintain the Printer Name in MM->Inv Mgmt and Phy Inv->Print Control-> Gen Settings-> Printer Setting Enter the local printer where you want to print your Goods posting document
2. Ensure that in MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In MM->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311,313,501,521,561 etcu2026 Maintain the Print item as 1--Material document printout
5. In MM->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In MM->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc , Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

issue is resolved

TS1627 Please Help. I received 4 emails from 1 person with the same message heading. The emails were automatically grouped by Mail. I replied to the latest mail in the conversation. Once sent the other messages in the conversation disappeared. I NEED THEM

Please Help. I received 4 emails from 1 person with the same message heading. The emails were automatically grouped Apple Mail. I replied to the latest mail in the conversation. Once sent the other messages in the conversation disappeared. I NEED THEM BACK! They all had very important attachments. I have tried looking for them in deleted items, even though I didn't throw any of them away, still cant find them. Never had this problem before. I'm pretty sure its a setting somewhere. Also tried expanding all conversations, no luck. Searching for the mails under the sent email address, no luck.
I'm sure they are not deleted but have somehow been hidden by Mail. Very frustrating.
Thanks in advance for any help.
Kash.

I have found found out what has happened. I had requested a statement dating back to April 2012 from a supplier. They replied back with the latest statementof 2013 only but used the same subject heading as the previous monthly statements. Apple Mail automatically grouped these and I thought that they were sent altogether. As soon as I replied to the last email all other the previous emails ungrouped from the conversation leaving me lost as to where they had gone. They were all still sitting in my inbox but no longer part of the trcked conversation. I searched under the subject heading and all individual mails were all still there. (feeling stupid - )

How to make the prompt to pick the system date automatically at run time?

Hi,
I trying to create a publication for a report that has date prompt, When I try to schedule this publication the query should automatically select system date for date prompt and and send out the report. Is there a way to do this in CMC?
Thanks in advance
Hema

Hi Hema,
You need to create this Exit Variable with the condition that it should be generated ias a optional variable in the universe.
The reason for being is that when the prompt screen is appeared there is no default value which will be shown in the prompt. But when you press the run query button (will be enabled only after you make the prompt as optional) the BO query will fetch the data applying the restriction of the sysdate.
I hope I have made myself clear.
Regards,
Rohit

BPMN Are catch messages queud by the system?

We have long running BPM instances.
Event Sub processes are used to interact with those BPM instances
using correlation key. All this works fine in regards to having the
subprocess calling the right BPM instance and retreiving the needed information.
The question I have is: If an event subprocess is called
on a running BPM instance that already is processing the same event subprocess, would
that second event be lost or would it be queued by the system?
We wrote a little BPM test program:
We have a dummy main BPM that is started and initialize itself with a correlation key.
We also have an event subprocess that begins with a Start Message and uses the main
BPM correlation key. At that point everything works fine.
The event subprocess consist of :
Writing a message when entering the event subprocess, sleep for 20 seconds and then write a message
when sleep is done.
Within EM we started the the main BPM instance and quickly call 2 times the
subprocess operation. To our great surprise, the subprocess where queued.
2 messages where created when entering subprocess (for the 2 calls we have made).
But as soon the timer expired, only ONE “write done sleeping” was performed.
Its like if the second token was created when entering the event subprocess, while the first token was on the
timer. But when the second token reached the timer, they merged into one token forgetting the first call.
Clearly, using this technique to interact with a running
BPM is not safe or we are doing something wrong. Is there a better way to achieve our goal?
Thanks a lot
Antoine :)

I found the cause of my problem,
I was not using subprocess data object in the subproces. I was using process data object so values where overwritten by the next subprocess.
Antoine :)

Sending a broadcast message to all the systems in the LAN

Hi,
I am having a standalone java application [client/server]. My application server is running on some system in the LAN.
How can i identify that server ip in my client program?
Is there any possibility for sending broadcast messages to all the other systems on a specific port?
Thanks,
Gupta.

Is there any possibility for sending broadcast messages to all the other systems on a specific port?If you have more than one router/hub these will need to be setup to allow this traffic.

When I send a message to blueyonder the system says the message has been sent yet the recipient cannot find it in his emails or on the server.

I compose a message and press send. The system states that it connecting and then that the message has been sent. When the recipient looks for the message on his system and/or the server he cannot find the message. I have sent him messages direct from my server and also Outlook Express and he does get them it is only when using Thunderbird do the messages go missing. Do I have to use special settings to send messages to Blueyonder?

I'd suggest you contact your email provider. Similar problems have been reported from Virgin users.
http://community.virginmedia.com/t5/Other-Queries/Emails-to-blueyonder-users-not-being-received/td-p/1813248

When I try to use the Vision Acquisition vi, I get an error message saying that " The system did not receive a test packet from the camera."

Error -1074360271 occurred at IMAQdx Start Acquisition.vi
NI-IMAQdx: (Hex 0xBFF69031) The system did not receive a test packet from the camera. The packet size may be too large for the network configuration or a firewall may be enabled.

Bruce Ammons wrote:
Did you try disabling test packets? I know Basler cameras have a "Enable Test Packets" setting buried in Advanced Network settings or something like that. You have to change the setting in MAX to show all settings instead of just acquisition, then locate the setting. I have been told regularly that the setting must be turned off for Basler cameras to work properly. Perhaps your camera has the same setting and the same requirement.
Bruce
A very specific firmware revision for certain Basler cameras had an issue where the test packet would not be sent for certain packet sizes and certain specific conditions, causing a false report of a test packet failure when a normal acquisition would in fact succeed. However, this was fixed in later firmware revisions and I have never seen a similar issue on any other types of cameras.
Aside from this specific case, if a test packet fails, it generally means an acquisition will as well. Given that Pleora's software can acquire, we can rule out networking topology and hardware, assuming you are using the same packet size as the Pleora software is. The only other thing that would seem a likely candidate would be a software issue like a firewall or some other filter driver that is interefering with IMAQdx receiving the data.
Eric

The system could not create the msg bc of an RFC connection "NONE" error

All-
I am getting this error message when I try to save and send a Service Desk message from the BSP. I have seen a few other threads on this already and have tried the recommendations.
Here is what I have tried:
1. Maintained table BCOS_CUST accordingly
2. Made sure there is an SLFN process type entry in DNO_CUST04
3. Made sure my NONE RFC is working in SolMan's SM59
4. Viewed the NONE entries in SMSY
Is there anything else I am missing? The message seem to be ending up in the crm_dno_monitor, but I am not getting the "message successfully sent to SD" when I send it.
Please advise.
Thanks

Resolved. Take a look at your action profile and make sure that Create/Change Basis Message from CRM Procedure is active. Not sure what this has to do with RFC NONE, but this is what did it.
Also check log in SLG1

Why is the Pen Tool automatically creating shapes for me?

Hello,
I appreciate your time in reading my question. I was just wondering why the Pen Tool on Adobe InDesign CS6 is creating shapes automatically for me. Which is not allowing em to finish what I was was wanting to create?
Here is a 15 second video of what I mean: IMG_0506.MOV - Google Drive
I would really appreciate any help you could give me. Have I pressed something wrong?
I look forward to hearing from you soon
Kind Regards
Daniel.

Hi Peter,
I never realized that. I am still a newbie when it comes to InDesign. I really do appreciate your help :-)
Enjoy the rest of your day
Kind Regards,
Daniel.

Display the system date automatically in the parameter at runtime

Post Author: sandeepsanadi
CA Forum: Crystal Reports
Hi,
While running a report, I want to display the current system date as a default date in the "From Date" parameter, without selecting the current date from the calendar.
Please let me know if someone knows how to get this.
Thanks in anticipation.
Sandeep

Post Author: sandeepsanadi
CA Forum: Crystal Reports
No.... This does not work. We had tried this before putting our question on the forum, but does not work.

Recently installed dvd drive and get the following error message on startup, the system extension "/System/Library/Extensions/IOSCSiBlockCommandsDevice.kext" was installed improperly and cannot be used. Pointer is frozen in upper left hand corner.

I thought extensions were not used by Tiger? Tried disk utility, restart, any suggestions would be appreciated. Thanks!

frybicki wrote:
I thought extensions were not used by Tiger? Tried disk utility, restart, any suggestions would be appreciated. Thanks!
There are bunches of kexts loaded in Tiger; you can see them in System Profiler. The info from my TiBook shows the following:
That being said, you might want to do an NVRAM reset, since you have made a hardware change. Boot into open firmware by holding down the cmd-opt-O-F key combination until you get to the white OF terminal screen. Then type the following two commands:
reset-nvram <enter>
reset-all <enter>
which reboots the machine and forces it to rebuild its device table.
If that doesn't work, you may have a damaged kext cache file, which will require some single user skulduggery. This one is a little more complicated but may also clear up the problem as well. You can boot into single-user mode by holding down the cmd-S key combination as you boot until you get to a black Unix terminal screen. The routine goes like this:
/sbin/mount   -uw   /   <enter>
cd   /System/Library   <enter>
rm    Extensions.kextcache <enter>
rm   Extensions.mkext <enter>
touch   Extensions   <enter >
shutdown   -r   now <enter>
The last command does a graceful shutdown and then reboots the machine. This will force a rebuild of the extensions cache files which may clear up your problem.

Message no :amoc001 the system couldnt automatically create a transfer docu

Similar Messages

Maybe you are looking for