Message "No Line Items Selected"

Hi friends,
I am getting a message "No Line Items were selected" while executing CJI4.
Or even when in the transaction CJ40/CJ41, I am going thru ....Extra>Line Items.......
I have even implemented a note but still the same message is coming.
I couldnot figure out what "Line Items" the system is asking for.
Pl. help me out.
Abhra Bose
9930459159

Refer to this note if applicable to your SAP pack: Note 1130282 - CJ40/CJ41: Plan line items not displayed.
1. Check planning profile assigned to your project definition.
2. Check Primary C.Element Grouping defined in the profile for Hierarchial Cost Planning. (if not defined use T.code CJR2 to build WBS detailed planning)
3. Check Number Range assignement for Detailed Planning for the controlling area and transactions assignment to intervals.
4. User Status maintained for WBS elements must allow "write plan items" business transaction.
Hope it all helps.
NChakoo
Edited by: NAKUL CHAKOO on May 27, 2009 9:56 PM

Similar Messages

New error message :duplicate line item

Hi,
We have to add a new error message so that when we try to add a duplicate line item in our qty contract
1. we should not be allowed
2. we should get a error message u201Cduplicate line item not allowedu2019
How to achieve this
Thanks
Arun

Search this forum for "USEREXIT_SAVE_DOCUMENT" and "USEREXIT_SAVE_PREPARE".

Regarding nor of line items selected in per select query..

hi,
i want to display nor of line items selected in per select query for two individual queries which are linkesd by for all entries..
regards..
chetan

Hi,
I dont unserstand the problem you are facing. please paste your SELECT query and then explain the problem. then it will be easy for analysis.
Basically DESCRIBE TABLE itab LINES n. this statement will put the number of lines the internal table contains
//Kothand

Regarding Line Item Selection and product category

Hi Experts,
We are having a requirement in Line Item Selection in Oppurtunity.The requirement is that we need to display only the product categories belonging to that particular company(for eg Product Categories belonging to Company X) by restricting the display of product IDs.Please provide me some pointers on this as this is a high priority requirement.
Requirement:Line item selection of an opportunity will be at a 'X' category from the product hierarchy level.

Hi Amar,
You have to retrieve all you rproduct ids based on your criteria before the execution of the below step in your method.
result = qs->get_query_result( ).
Once you have all your product Id's then default your search criteria with your product id's using the below code.
ls_selection-attr_name = 'PRODUCT_ID'.
      ls_selection-sign = 'I'.
      ls_selection-option = 'EQ'.
      LOOP AT it_product INTO v_productid WHERE comt_product_id CP ls_search_criteria-low.
        CLEAR ls_selection-low.
        ls_selection-low = v_productid.
        CALL METHOD qs->add_selection_param
          EXPORTING
            iv_attr_name = ls_selection-attr_name
            iv_sign      = ls_selection-sign
            iv_option    = ls_selection-option
            iv_low       = ls_selection-low.
        CLEAR: v_productid,wa_result.
      ENDLOOP.
this code should be included in your event handler before calling get_query_result( ).
Hope this helps.
Regards,
Lakshmi.Y
Edited by: Lakshmi Soujanya on Jul 11, 2011 11:55 AM

Restrict Number of Open line items selected for vendor payment in F-58

Dear Experts,
simply in F-58 i want the system to issue an error message if the user select more than 10 or maybe 15 open line items for payment, the reason is to make sure that the number of line items selcted will fitt in the From specified for printing.
is there a way to do so ?
i already got on but not sure how to use it.
please advice
Thanks and regards
Mohamed Talaat

hi,
my restricition is regarding the form that the key user want only one cheque paper to be prininted and the space for that can hold only like 10 or 15 line items so he just want to define this number and cant exceed it in one paymnet.
payment advice control i think can do this but am not sure its under t.code FBZP payment method in company code, haveyou try this before ?
and how come we design the form for multiplie pages andthen accomidate in one page ?
as they insert in the oprinter a seralized prinitng cheques paper sequincely.
please clarify
Regards
M.Talaat

VA01 - Need to display an error popup message on line item check

Hi All,
I'm working on a user exit (report MV45AFZZ, form routine USEREXIT_FIELD_MODIFICATION).
I already have all the logic necessary - the one final piece that is left is to display an error pop-up message if the line item quantity is less than a certain number.
The pop-up should display when the enter key is pressed in the quantity field. Also, the pop-up should display if the SAVE button is pressed.
I tried using
MESSAGE 'Please increase quantity' TYPE 'E'.
This worked, but unfortunately it caused VA01 to terminate when I click off the pop-up. This is strange, since type 'E', unlike type 'A', should not do that.
I also tried POPUP_TO_INFORM, but that's just an informational message which does not prevent saving.
Any ideas ?
Regards,
Roman D.

You can try this fm
                CALL FUNCTION 'DD_POPUP_TO_CONFIRM_CANCEL'
                     EXPORTING
                          textline1    = text-902
                          textline2    = text-903
                          title        = text-901
                          start_column = 25
                          start_row    = 6
                          defaultpos   = 'C'
                     IMPORTING
                          answer       = cancel_rc.
                CASE cancel_rc.
                  WHEN 'A'.
                  WHEN 'C'.
                    LEAVE PROGRAM.
                  WHEN OTHERS.
                ENDCASE.
Based upon user inputs you can handle conditions (CANCEL_RC) accordingly.

CO 1SRJ-001: Too many line items selected via report interface

Report group/report 1SRJ/1SRJ-001 (CCentres: Rolling Year): provides an overview for the last 12 periods of actual and plan data.
When you access line item report RKAEP000 (KSB1 or KSBP) from report Cost Centres Rolling Year (1SRJ-001) using the report/report interface, too much data is selected.
For example, you enter fiscal year 2009 and month 8 in selection parameters, the report generates results for the last 12 periods: 2008/9 to 2009/8. But the line item report accessed via report interface selected ALL data for the fiscal years 2008 and 2009.
I searched and found Note 127643 that described a similar but not exactly the same situation. Have anyone have any problems with this report? Any suggestion is appreicated.
Regards,

Issue with report 1SRJ-001 (S_ALR_87013631) has been resolved. The interfaced line item report selects all data records for fiscal years 2008 and 2009, instead of just for the selected last 12 months. The problem is due to missing restrictions for a characteristic, in this case, the from-period and to-period fields.
SAP has corrected the problem by issuing an updated version (1999) and the one we were using was the 1995 version. I imported the updated version of report from client 000 and now it works fine.

Error message: Missing line item for CO-PA characteristic line 0000000001

Hello, when posting is being done in automatic we are getting the following error message RW621 : 'Missing line item for CO-PA characteristic line 0000000001' and the document is not being created. I've filled in correctly the cost center / profit center for the line items. Any idea on why i'm getting this message?

Hello Prashanth ,
there are 2 structures I think you should fill
CRITERIA (ref structure BAPIACKEC9 )
VALUEFIELD( ref STRUCTURE BAPIACKEV9) in BAPi_ACC_DOCUMENT_POST
hope this helps...

Restrict purchase order line item selection in MEMASSPO

How to restrict in authorizations of role which purchase order line item can be selected by user in the memasspo.
I have a scenario where Business wants that no user should be allowed to select all the Purchase Order line items rather should be displayed sub set of the entire purchase Order line items while attempting to do mass change in the PO created.
Thanks & Regards,
Abhimanu

The mass transaction is meant to change many POs and their items at one time.
The user can not change anything with mass which he cannot do in ME22N.
if he can do it in ME22N, why should he not be able to do it in MEMASSPO?
Based on what criteria should a item be restricted from a change in your special case, how do you define your subset?

To throw error message on line item

Hi Experts,
I am using the user exit MV45AFZZ_MOVE_FIELD_TO_VBAP of sale order and it is getting triggered when we press 'ENTER' after filling the line item details of a sale order.
In my requirement i have to check some conditions on the line items and have to throw error message on that particular item sothat the user can delete that item and can proceed with the remaining.
But i am not able to throw error message on the particular item.
Please help me to throw error message on the particular tabstrip corresponds to the item.
Thanks in Advance,
Shaju

You can try this fm
                CALL FUNCTION 'DD_POPUP_TO_CONFIRM_CANCEL'
                     EXPORTING
                          textline1    = text-902
                          textline2    = text-903
                          title        = text-901
                          start_column = 25
                          start_row    = 6
                          defaultpos   = 'C'
                     IMPORTING
                          answer       = cancel_rc.
                CASE cancel_rc.
                  WHEN 'A'.
                  WHEN 'C'.
                    LEAVE PROGRAM.
                  WHEN OTHERS.
                ENDCASE.
Based upon user inputs you can handle conditions (CANCEL_RC) accordingly.

KSB1 - Incorrect line item selected on drill down

Dear Guru's
To set the scene we have been using KSB1 for a long time. Now something odd is occuring - but what appears to be quite randomly.
When we run a standard KSB1 report and drill down to line item detail we are getting the wrong (and completely unassociated) detail.
We have not seen this happen before and wondered what could be causing it.
We are running KSB1 using parameters for Cost Centre, Cost Element (range) and Posting Date (range)
We are also using a plain layout variant.
If anyone else has seen this before advice would be appreciated.
Regards
Steve
points will be assigned

Nitish,
We run KSB1 to show us how much has been spent by a certain cost centre during the financial period. We would then usually double click on a certain line that appears high or overspent to see the detailed transaction. In almost all circumstances you see the accounting document (eg: SA, KR etc)
But for some reason (and for a small percentage of items) when you double click you do not get shown the correct accounting document.
On these items when you double click to see more detail you get presented with an accounting document that does not match the original screen. In some instances you get an accounting document that is several years old and for a completely different GL account and cost centre -eg: bearing no relation to you original query.
It's almost like the link to the correct accounting document is broken?
I could screen dump what it happening but as a newbie I don't know if this is allowed or would work on here.
Regards.
Steve

Adds selection field at the first screen of FBL3N (G/L line item display)

I would like to adds line item selection field at the default first screen of FBL3N.
The field I'd like to add at the default selection screen is :Amount.
This field can be selected at dynamic selection. But I'd like to use the field at the first screen of FBL3N, not in daynamic selection screen.
If anyone knows how to add the fields into FBL3N first screen, please advice me how to do it.
Edited by: Itchy31 on Jul 23, 2009 8:30 AM

Hi,
You can not add the new fields in the selection criteria thats the reason dynamic options are given for the further selection.
If you still want to add in the selection screen then go for a customisation and coordinate with the ABAPer which is not suggestable as it is readily avilable in dynamic selection.

Error Message " Line items reduce the cut-off value by 262,499 "

Hi, User was doing selling the assets and while posting the document in FB05 , user is getting this message that "Line items reduce the cut-off value by 262499 "
Msg No. AA632.
why this message is coming and the exact meaning of this error.
Sachin

HI
Please see the OSS note
93033 and 935995
Thanks & Regards
Phaneendra

Line item not relevant for payment release

Dear Expert,
When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
I also have set payment block in master vendor and OBB8.
Can you tell me why the error message still appear?
Kindly need your help
Thanks and Regards,
YL

Do you have any workflow variant in place?
Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
Vendor itself will not get paid until unless you remove the block option
Thanks

Delete a line item from Sales Doc type RE

Unable to delete a line item from a sales order linked to document type RE. Get a long runtime - no specific error message. Use the 'Stop Transaction' option to end the transaction.
Have done thorough testing and can delete line items linked to all other sales document types in our system.
Researched SPRO to see if there was a line item deletion option that was not created for sales doc type RE - but can find nothing.
On a critical time line here - this was discovered during Hotpak installation testing which is scheduled to move to PRD June 22. Question as to why we have not run across this issue before now?? - I don't think we have had an occasion to delete a returns line item before - but I want to have the option if available.
Any help to resolve this issue would be appreciated.
Regards
Patsy

Thanks for your response.
After creating document type RE, execute VA02 transaction, select line item, select delete line item icon. The system goes into runtime and just stays there. No error message, no abap dump. To escape the transaction, I have to select 'stop transaction'.
I have tested all other document types we use in our system, (including our customized transactions) SO, CR, DR, etc., and the system allows line item deletion.

Message "No Line Items Selected"

Similar Messages

Maybe you are looking for