Message no. M7096

Hie,
We created SO with using Schedule lines ZD (FOC item to consign) & perform Outbound Delivery via t/code VL01N. Later we have found that we use wrong schedule lines, it suppose to use different schedule line Z8. Thus I wanted to reverse outbound delivery via t/code VL09. Unlikely I cant reverse it & getting error "Goods movement not possible with mvmt type Z15"
Goods movement not possible with mvmt type Z15
Message no. M7096
Diagnosis
You have entered a movement type that has not been defined for this transaction/event.
Procedure
Choose another movement type.
You can choose the movement type as follows:
If you know the movement type, enter it directly in the Movement type field.
Choose the movement type via the menu option Movement type.
Choose the required movement type from the possible entries.
If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
I unable to understand the description the ablve in order to reverse this outbound delivery. Can anyone assist me. TQ
rgds,
nema

I try to reverse this outbound delivery via t/code MBST. Still I'm getting error as stated below. According to this error, I should reverse this via t/code VL09 but I couldnt do that. Hope anyone can help me out. TQ
Material document cannot be processed
Message no. M7130
Diagnosis
This material document was generated through the posting of a physical inventory document, a delivery via Shipping, or some other automatic movement (such as an order confirmation in PP or a usage decision in QM) and cannot be processed with this function.
System Response
In this transaction, the system can only cancel a material document if the latter was created using an Inventory Management transaction.
Procedure
Cancel the material document in the component that created the document.
You can only reverse the goods movement created through the posting of a physical inventory document by carrying out a new physical inventory for the relevant material. You can reverse a delivery effected via Shipping using transaction VL09.
rgds,
nema

Similar Messages

  • PROBLEMS CANCELING MOVEMENTS WITH INSPECTION LOT

    We have this situation:
    We need to reset the GD returns but this GD returns was posted by QM and when we try to cancel in VL09 we meet the next message Message no. QA046.
    So we tried to cancel in other ways with the inspection lot and the usage decision but it has not been possible to restore movement.
    We found the note 175842 and we have implemented the program RQEVAC50 but, when we useit we meet the message M7226
    We checked the movement Z55 and its opposite Z56. I suppose its standard movement is the 651 and 652 and I compared the customizing of them. They can be similar it just the movement Z55 and Z56 are prepared to be posted by QM and special stock E and Q.
    The movement that we need to reset with the program RQEVAC50 is:
    We have tried to use the program for a movement 101 and it worked well (5000795975).
    We tried to test with a return delivery with Z55 movement in another environment and the program worked correctly so we think the customizing of the movement Z55 is correct.
    We think the problem is when the usage decision creates some movements or we use some of the next fields in the usage decision:
    In our case the movements are 321 and Z56.
    But when the movements are the standards 321 and 553 program doesn’t work because we meet the next message again M7096
    Program doesn’t work because we meet the next message again:
    What can we do? could you check thi situation and tell us anything, please?
    Kind regards

    hi,
    check these tables for <b>results</b> entered through lot
    QAKL
    QAMR
    QASE
    QASR
    if they have used <b>inspection points</b> check this table QAPP
    for i<b>nspectionlot</b> check table QALS
    hope this helps !!!
    Cheers
    Alfred

  • Bapi for transfer posting

    Estimated,
    I have to make a move between storage location of material that is blocked with status (movement 325). For that I'm trying on the Bapi MB_CREATE_GOODS_MOVEMENT and run with the same parameters as when I review the transaction MIGO_TR, but the structure EMSEG gives me the message number M7096 "Goods movement not possible with mvmt type 325". What could be wrong? and tried doing the Bapi commit, but still gives me error. It also showed the Bapi BAPI_GOODSMVT_CREATE and throws me the same message. Please I am desperate.
    Thanks.

    Hi,
    You can't use function module MB_CREATE_GOODS_MOVEMENT for movement 325, since that function module is used for Goods Issue for delivery.
    You should use bapi "BAPI_GOODSMVT_CREATE" for this movement 325 instead.
    Passing GOODSMVT_CODE = 04 (for Transfer Posting)
    The following thread has a sample code of above BAPI, then do adjustment accordingly as per your requirement.
    Re: i want to Stock upload with movement 561 and t code is mb1c
    Cheers,

  • SAP message Log

    Does SAP maintain log of all the messages displayed on screen using MESSAGE statement?
    We are investigating a problem and want to see the messages displayed by SAP during the time when problem occured.

    We have custom development for picking and confirmation. Last week we found that in some deliveries there is difference in delivered quantity and packed quantity.
    Custom development is calling sap-standard FMs. Problem occurs randomly, roughly 10 deliveries in a week has this problem.
    We are still trying to investigate the reason that is causing the problem.
    Custom program does display the message to user if FM raise any message. We asked user of they are getting any message while picking, and if they are ignoring it.
    They just confirmed that they are getting message 'Packing Not Possible Since there is no Quantity to be Packed' and they did ignored this.

  • Windows Vista: Ipod Error Message, no longer read by PCs

    Hello,
    I have a 5th generation black ipod video with 30GB of memory.
    The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
    Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
    I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
    What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
    Any advice would be greatly appreciated! Thanks!

    you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

  • Error message into a Variable.

    Dear users,
    I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
    My requirement is like this:
    I have a message class in which I want to define a text 'Employee number & not found'.
    I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
    So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
    lv_text = e0xx(messageclass) USING '1234'   which stores the text 'Employee number 1234 not found' in lv_text.
    How would I acheive it??
    Thanks, V!

    Try tis way
    message e999(00) with i_emp-empno into lv_text.
    press f1 in message will provide you more details

  • Cannot sync, error message "could not be read" for an iPod no longer in use

    I have two problems. I upgraded iTunes to 7.2 and the very next morning my iPod died. It is completely unresponsive. Maybe it's coincidental. So I bought a new 80 gig iPod and gave it a different name than the old dead iPod. Now when I try to sync the new iPod, it goes for about 10 minutes, then it fails with this message:
    Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
    It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer! Somehow, minutes into syncing, iTunes has forgotten which iPod it is looking at. I have seen the article about the "cannont be read" message and it is not relevant. I need to make iTunes forget about the old dead iPod so it will stop looking for it. I've tried removing the files from "Documents and Settings" but iTunes still remembers the old unit. Where else does it store information? Any recommendations?
      Windows XP  

    Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
    It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer!
    Okay, that can sometimes be caused by a Windows drive letter confusion. For troubleshooting advice on that possibility, see the following document:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • Error message: "playlists selected for updating no longer exist"

    I tried to update my ipod nano and I guess I had deleted a playlist, but since then, I have not been able to update. Every time I try, I get the following message:
    "Cannot be updated because all of the playlists selected for updating no longer exist."
    I haven't been able to highlight which playlists are selected to begin with.
    I read through the manual and thought that maybe rebooting the whole system might work. So I deleted Itunes from my computer and re-installed.
    Then I tried re-setting my ipod. So now I have nothing on my ipod.
    I also deleted everything from my library, thinking it might help to start from scratch. Nothing has worked.
    How do I "select" and "unselect" playlists so I can get up and running again?

    Here you go.
    http://discussions.apple.com/thread.jspa?messageID=607312&#607312

  • IPod seen by windows, not by iTunes+ weird error message

    I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
    and why is there no email adress from apple for service qustions? 10x

    I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
    Did you read the document i linked you to? here's another link to it:
    Putting iPod into Disk Mode
    whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
    ... never mind ... i guess you've fixed it anyway ...

  • Error message iPod cannot update b/c all of the playlists no longer exist

    Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
    PC   Windows XP  

    hiya!
    And my playlists are still on the left side in my iTunes. They do exist.
    let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
    is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
    love, b

  • Windows 7 displays error message when exiting +cursor issue

    Two issues here. CS5 Phoshop on Wind 7 64 bit.
    Physical processor count: 8
    Processor speed: 3073 MHz
    Built-in memory: 12279 MB
    Free memory: 9577 MB
    Memory available to Photoshop: 10934 MB
    Memory used by Photoshop: 80 %
    Image tile size: 128K
    First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
    The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
    Any help will be gratefully accepted.
    Doug

    function(){return A.apply(null,[this].concat($A(arguments)))}
    doug87510 wrote:
    The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
    Well, that issue is simply a matter of hitting the Caps Lock key.  When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair.  That's a feature, not a bug.
    Glad to hear the 11.1 drivers are out.  I will download them and try them now myself.
    Regarding "Adobe QT" crashing...  QT brings to mind QuickTime, though that is Apple, not Adobe.  Do you have Apple QuickTime installed?
    Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
    -Noel

  • Windows Blue Screen Error Message Appears As Soon As IPod Connected

    Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

  • IPod Error Message: "The disk could not be read from or written to."

    Hello!
    I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
    I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
    Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
    Any help would be greatly appreciated. Thank you in advance. ^_^
    PowerBook G4   Mac OS X (10.4.3)   15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

    Okay I went thru that entire list and here's what I got...
    (1) My OS is XP and is running fine.
    (2) I've updated my windows
    (3) I don't know of any software that might be interfering.
    (4) There are no damaged files.
    (5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
    (6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
    (7) The USB cord is firmly connected into my USB port and my iPod
    (8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
    (9) I will try another USB cord to see if that works.
    Is there anything else that I can do? Can Apple fix this?
    Please let me know.

  • IPod Touch will no longer sync...error message.

    For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone? 

    What is the exact wording of the error message?

  • Error while creating a support message in satellite system

    Hi,
    I am facing an error while sending a support message to solman form the satellite system
    (( Error Description :  Error in Local Message System: Error when opening
    an RFC connection Message was Not Created ))
    1) I gone through various threads and set the required authorizations like
    SAP_SUPPDESK_CREATE and
    SAP_SV_FDB_NOTIF_BC_ADMIN ,
    SAP_SUPPDESK_ADMIN
    for the user in the solman .
    2) I checked the RFC connection and it is working fine.
    Anyone pls help me to resolve this issue

    hi rohit,
    thanks for u r immmediate response
    do i have to assign the roles to the user in the satellite system or the solman.
    some roles in those 4 roles are not in the satellite system.
    thanks
    Rahul

Maybe you are looking for