Message no. M8584 ''Enter a currency key'' in MIRO
Hi Gurus,
Infact I am facing a warning message while doing MIRO. Just after inputing MIRO header like Doc date, Posting date, Reference and lastly amount field when I press the enter, I get the above cited warning error. Can you please tell me how to remove this warning error message.
Thanks
BABA
HI,
It sounds like your system is operating according to design. System behaviour changed with note 982645.
The message always comes if you enter header data into miro BEFORE entering PO number and hitting ENTER. It comes even then if you enter header data and PO but press ENTER only afterwards! This is because the check of existence of currency key in the coding happens before the determination of the currency key from the PO. At the time the data are not determined from the PO, the system cannot know whether there will be a PO entry as in MIRO you can post also without a PO reference.
To eliminate the message is to enter the PO first then all other relevant data.
To get rid of this behaviour please implement SAP Note 1001420. This note just deletes new coding.
Please assign points if it useful.
Regards
Ravinagh Boni
Similar Messages
-
Defaulting Currency key in MIRO/FB60 header.
Hi All,
Can you please advise where do we make the setting to default the currency of the invoice amount in the header section of MIRO or FB60 ?
Thanx,
SandyHi Sandy,
Pl go to FB00 and do default currency.
Hope this helps.
Regards,
Mani -
MIRO: enter currency key
Hello all,
I have got a question regarding transaction MIRO. When I enter info like posting date, amount in the header I get an an informational message "enter a currency key"
It's not a hard error so I can enter through the message but I wonder how I can get rid of that message. I understand the system aks me to enter a currency but I don't want to enter the currency manually as the currency automatically defaults from the purchase order when I enter the purchase order nr in MIRO.
My question to you is how do I get rid of the informational message that asks me to enter a currency key. I know that this should be possible as I get this message only since we implemented support pack 53.
We are on SAP 4.6 c
thanks for your help,
LatifaHi Lafia,
I would recommend to use transaction OBA5 to modify the message control. Enter the message application area there and then enter the last 3 digits of the information message. Then you should be able to set '-' (message completey switched off) for your information message.
Best regards,
Andreas -
Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-0
Hi all,
I have found a error "Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-01'" while adding the DELIVERY document.
I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
Could anyone solve this problem. is there any setting which i am missing..??
Regards
SandeshHI Sandesh,
Check Sap note :1252328
and also check below thread of similar issue:
Re: 'Invalid Currency' error when attempting to deliver order
Hope this will solve your issue.
Thanks,
Neetu -
Error message: "Enter valid currency [Message 173-57]" during Deposit transaction
Hi All,
Is there a specific reason why can't I deposit from a "Multi-currency" cash account to a "specific (i.e., USD)" cash account using the Banking> Deposits> Deposit module.
I have already read below threads related to this issue.
Error message "Enter valid currency [Message 173-57]" during cash deposit
Can't Create Cash Deposit of Journal Entry due to "Invalid Currency" Error
Transfer Between bank accounts in different currencies
GL Postings between different currency accounts
foreign currency transactions
SAP Business One Note: 1260658 - Transfer monies between different monocurrency accounts
I have posted successfully e cash transfer from multicurrency to monocurrency cash account thru Journal Entry, However, I wanted to know the reason why it is not possible to post this transaction thru the Banking> Deposit module.
Appreciate your feedback on this matter.
Thanks!Hi,
Same error message is appeared in 8.81 PL10. So this is not due to PL. If you select other than local currency at deposit currency, this error appears.
Let me check and update.
Thanks & Regards,
Nagarajan -
After downloading SP0, and entering the product key, get Evaluation message
I have bought CR2008, then downloaded SP0.
I entered the product key from my original CR2008 cd.
Now every time I start CR I get a message: Evaluation Copy: This will expire in 7937 days. etc.
Now 7937 days is 20 years, so I am not afraid of loosing the use of CR but it is rather annoying.
How can I turn this message off??Install SP1 and then SP2
-
Hi all,
I have an error when i run ASKB transaction, the system displays error message SG 105: "Enter rate EUR /SKK rate type & for 00.00.0000 in the system settings".
The exchange rate table has been maintained correctly in the system.
We are using a local exchange rate type N, M and EURX
We have the following additional currencies in the system:
10 Company code currency Currency EUR
0 Legal valuation
M Standard translation at average rate
1 Translation taking transaction currency as a basis
3 Translation date
40 Hard currency Currency SKK
Legal valuation
N Natiaonal bank exchange rate
1 Translation taking transaction currency as a basis
1 Document date
50 Index-based currency Currency EUR
Legal valuation
N Natiaonal bank exchange rate
1 Translation taking transaction currency as a basis
1 Document date
Could you please help me on that?
Thanks in advance
Regards!Hello,
This is not the place where you should look into. You looking at the parallel currencies maintained in the system.
However, you have to look for exchange rates are being matained between two currencies.
Either you can maintain a direct quote or an indirect quote.
Please go to transaction code OB08
Some important notes for your information:
Currency Key must be assigned to every currency used. Most of the currencies are
Already defined in the SAP system with standard international currency keys.
For every combination of two currencies, you can maintain different exchange rates
Which are distinguished by an exchange rate type.
Exchange Rate Types are:
Historical Rate
Bank Selling Rate
Bank Buying Rate
Average Rate
the rate on certain key dates
u2026u2026
Translation Ratios: The relationship between currencies must be maintained per
Exchange rate type and currency pair using translation ratios. E.g., 1 USD = 1 GBP
Or 1 USD = 100 JPY.
There are two types of Quotations available in SAP:
Direct Quotation
Indirect Quotation
In Direct Quotation, one unit of foreign currency is quoted for the local
Currency, where as in indirect quotation, one unit of local currency is
quoted for the foreign currency.
Direct Quotation: 1 USD = 44 INR
One unit of foreign currency USD costs the displayed number of units of local currency
Indirect Quotation: 1 INR = 0.02273 USD
For one unit of the local currency INR you will receive the displayed number of units
of foreign currency.
You are looking at the following place: (This may have performance problems, unless it is a critical business requirement)
You can maintain two parallel currencies in additional to local currency or
Company Code Currency. You can select two currencies from the
following currencies:
Group currency
Group currency is the currency which is specified in the client table or
which is to be entered there.
Hard Currency
Hard currency is a country-specific second currency which is used in
countries with high inflation.
Index-based currency
Index-based currency is a country-specific fictitious currency
which is required in some countries with high inflation for external
reporting (for example, tax returns).
Global company currency
Global company currency is the currency which is used for an internal trading partner.
Maintaining the two parallel currencies would highly impact the system performance as
the system is preparing additional two ledgers, besides the normal ledger.
Thanks,
Ravi -
Exception occurredE:BBP_PD:058 -Enter a currency E:BS:002
Hi All,
We are using MM-SUS scenario with SRM 5.0 and ECC 6.0 as the backend.
We have an issue while sending the purchase order from the MM to the SUS system.
The PO reaches the SUS system and our SXMB_MONI shows the following error message :
An error occured within an XI interface: Exception occurredE:BBP_PD:058 -Enter a currency E:BS:002 -"Create" is not allowed (SUS Confirmation XXXXXXX ) Programm:
This is happening for some POs and DS's(SA), the reason for which we are not able to find.
There is a OSS note Note 817380 - You cannot create a scheduling agreement release in SUS, with the same error text but these corrections already exist in our system.
Can anyone faced the same issue?
Can anyone give any links/suggestions/OSS for this particular issue?
Best regards,
SridharHi,
Please look at the below link. Shd solve your problem.
Error in SUS PO creation
Rgds,
RRK
Do reward points -
Hi,
Do you know how the currency key entered in COPA document is found ?
The currency key should be equal to document currency.
For the operating concern view of the COPA document, my currency type is not equal to document currency but to company currency.
Thank you for help !I might have misunderstood your question. In the summarization tables that are normally used for BW extraction there is no transaction currency available. You can have transaction currency only at line item level.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c38c24a0111d1894c0000e829fbbd/content.htm -
About field HWAE2 Currency Key of Second Local Currency)
can anybody tell me that field HWAE2 ( Currency Key of Second Local Currency)
in which TRANS.TABLE...?????it is in BKPF table
or go to se11, Select data element radiobutton
type HWAE2 click enter.
and check for where used list, it will give all the tables assosiated with HWAE2 field.
regds,
kiran -
Currency key for Conversions using NODIM
Hello Experts,
I have question related to Currency key.
I have below mentioned scenario -
My Report output looks something like this
Doc No|Doc Value| 500 |USD |
so KF value and currency key(USD) are in seperate fields(column in Bex Report)
I seperated them by doing NODIM on KF and including the Currency key in Report.
The problem arise when I do currency conversion.
So on the initial Selection screen I gave user an option to run by different currency, so when he select lets say CAD.
The KF does get converted from USD to CAD but my currency key still remains a USD, whereas I would like to show that one based on what user entered on initial Selection screen(which would be CAD in this case).
I have searched forum for this but couldn't find proper solution.
Any guidance is appreciated. Thanks in advance.
Regards,
DNPHi friend
If you are working on UAE, the country grouping have to use is 99.
Check with your FI guy that he had assigned the currency AED to your company code. You can view this in table V_T001.
When you define the personel area, do give country as AE in table T500P
You can default your currency as per pays Scale type and Pay scale area in table V_T510F_B selecting country grouping 99.
I hope this will resolve your problem.
Regards
Santhosh.S -
Hi
When i process the Inbound IDOCS from 51 status to post application document thorugh BD87 T Code : I am geetting an error message that Currency key is unknown .
The mesage number : Message no. S&044
The program running attempted to read the technical description of a view required for the authorization check.
This description does not exist in the system.
Procedure
Regenerate the view so that the technical description is regenerated.
Kindly help me on these . Since it is very critical efforts are highly appreacited .
Regards
Ravindrareddy .please check the idoc for segments with error
seems that idoc contains invaild curency key, pls ask the EDI team to correct the same.
e,g in idoc currency USD was missplled as UDS etc.
Hope this helps
Pls assign points as way to say thanks -
Defining currency key for currency type
Hi
I have to define the currency group in the controlling area as 30 (Group Currency). There are three company codes which have to be assigned to this controlling area. However, the system is not accepting the same and giving an error message " Difference in currency INR does not match SGD".
Similarly while defining another currency in company code, for currency type 30, the system is giving an error message, "Currency Key no defined for Group currency". Pls help
Regards
Sanil Bhandari> Hi
>
> You can reward points too with thanks.
>
> Regards,
> vivek
Hi
I have already ticked the check button for problem solved which carries the maximum 10 points for the same to you
Regards
Sanil -
I have a current iMac with the latest OS update.
My new smart TV recognizes my network, & asks, “Please enter your WEP keys (10 or 26 hex digits). My Airport Express, an early model, only requires a password of less than 10 characters.
When I open “airport utility,”on my iMac it tells me this version doesn’t support my base station & says go to “Airport Service & Support.” That’s what got me here.
My earlier MacBook runs OS 10.6.8. Its version of Airport Utility works. Its Airport ID has 17 characters, & uses the same password to access the internet, but it also has a “wireless password” of 26 characters, but only shows me the dots. i haven’t the foggiest notion what the characters are, if I put them in there years ago when i did the original configuration, or if they got there otherwise..
I’m afraid of changing those settings for fear that I’l mess up the whole thing.
How can I get my smart TV to connect to my network, ?Please check out the following AirPort User Tip on how to recover AirPort passwords.
-
How to enter a Private key into a keystore
Hi,
We have a propriteary CA, developed by us. I need to use this CA for my Signed Applet. I would enter this CA's public key(a X509 certificate) into my cacerts file.
Following is what I have done :
1) I have generated my own keystore, public and private key for signing the applet.
2) Signed the applet with the private key in the keystore.
To Do :
Now, the self generated public key(with which applet was signed) has to be signed by the properitary CA, so that when applet is downloaded my certificate is authenticated by the proprietary CA.
The problem is :
1) To get my public key certificate authenticated by the proprietary CA, I need the private key of proprietary CA.(so that I shall sign my public key file by the CA's private key) . The CA could give the private key as a byte array file. ( Or we could write a program to format the private key file, if any format exists and required). jarsigner requires keystore to sign. How could I create a keystore and enter my private key and public key into this keystore?
2) Is there any other way to do this?
Please help to resolve this problem.
RajeshCheck this:
<A HREF="http://java.sun.com/j2se/1.4/docs/guide/pugin/developer_guide/rsa_signing.html
Maybe you are looking for
-
WBS wise Line Items in PO output
Hi, In a PO there are several line items and some have different account assignment for different WBS elements.The requirement is that the printout of the PO given to the vendor should have the sub-total for each WBS element and at the end the Total
-
hi i wanted to check a value with condition. something like this <xsl:variable name="rootname" select="name()"> i wanted to check whether the $rootname= SportsData. how will i express this condition in a conditional statement rgds
-
Hi, I have been making a custom frame class for my applications, and am having some problems with dragging the window. At first there was the issue of my fan going wild if i dragged the window fast across the screen, but that seems to be solved by pr
-
My MAC (Intel) keeps crashing Adobe CS4 Illustrator. Help
Each time I try to print a file in Illustator CS4 the program crashes. Help
-
Hello there I am trying to delete data from Infotype 7420 along with its related objects. I am getting dump DELETE_FIRST_RECORD when I try to delete data using FM RH_DELETE_INFTY. When I create IT 7420 (talent group) it create data in following table