Message no:me038 posting cannot be done directly in to GL account 410000

while raising purchase order with respect to purchase requisition i am getting the above error!!!!!!!!

Hi ,
As per the details that you have provided , it seems that you are trying to create a account assinged Po.
The error for the GL 410000 is due to the nature of A/c as it would be an inventory a/c , so direct posting caanot be made to inventroy or reconcilliation a/c . The control of that is mentioned in Co code data of the GL a/c .
Go to FS00 T code and in control tab indicator " post automatically only ' is ticked , if yes then the error is due to that tick .
Dont make any changes in FS00 , consult your respective FI champion and ask him to make the changes or else take other GL account for making the PR .
hope this helps.
Regards ,
Dewang T

Similar Messages

SAP Express Document Error: Posting cannot be done

Hi Experts,
I have a problem on our QAS system, I have tried to post a lot of documents in transaction MIGO, in creating RFQ through ME41, in Posting Accounting Document in FB50. But all of them failed with the Express Document appearing at the end of the "Document Number Created" message.
Express Documents range from:
I. "MESSAGE_TYPE_X" when creating RFQ of One Time Vendors:
Short text of error message:
Database error changing table ADRC
Long text of error message:
Technical information about the message:
Message class....... "AM"
Number.............. 842
Variable 1.......... "ADRC"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Information on where terminated
    Termination occurred in the ABAP program "SAPLSZA0" - in "ADDR_SAVE_INTERN".
    The main program was "RSM13000 ".
    In the source code you have the termination point in line 553
    of the (Include) program "LSZA0U47".
    The program "SAPLSZA0" was started in the update system.
II. SAPSQL_ARRAY_INSERT_DUPREC, Post Goods Receipt in MIGO
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "INSERT_TABLES" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
III. SAPSQL_ARRAY_INSERT_DUPREC, Posting through FB50
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "INSERT_TABLES" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Please provide direct solution for the system problem. And please tell me also what are the usual causes of these problems (Configuration-wise or ABAP)

Please check if you are using any 'user exits / BADIs' for this transaction and make sure you are not using a "Commit Work" in that. That is usually a common mistake. Sometimes, calling a screen or a pop up incorrectly can also cause the issue. In your case though, it seems like there is a Insert statement that is trying to create duplicate entries. Check that and if you still need an insert, you may want to use Modify instead..
Thanks,
Srini

When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore?

When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.

This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!!

Help with an error message: This edit cannot be done...

"This edit cannot be done because a transition would be cut or an item to one side of a transition would become too short."
Can someone please help me understand this one? I have a project with self made lower thirds from a .tif graphic on V2 and a text track on V3. Each track has a 15 frame Edge Wipe on both ends. Within the sequence I have no problem either drag copying both tracks together or even copy/pasting them further down the sequence.
The error pops up when I try to copy/paste to a different sequence. Regardless of whether I try to paste it above my video on V1 or past the video's end I still get that error message.
If I delete the transitions, I can copy/paste just fine and re-add them, but it's so frustrating. I really just want to understand what's going on here. Could someone explain this in layman's terms?
Edit: I should also add that if I Option-Click the Toggle Auto Select for track two, I can paste just fine. Which might lead me to believe that it's trying to paste to track V1 where video is already laid down, except that even if I try to paste after the video it still won't work. If I'm copying track V2 and V3, shouldn't paste automatically past to V2 and V3?
Message was edited by: The Bundok

I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck!

I have bought some movies and the don't sync to my iPod touch it comes up with this message that says it cannot be played on my iPod. Please can someone help

I have brought some movies and they just come up with this message that says it cannot be played on this iPod. I've bought movies before without iTunes Extras but these have iTunes extras and they don't want to sync with my iPod
Does anyone know what is wrong?

Sounds like you are trying to sync the HD version of the video. You should try to download the Standard Definition copy instead and sync that to your device as HD content is only compatible with the 4G iPod Touch. See here for more information:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
To prevent HD versions from being downloaded in the future head to the iTunes Store, click the Purchased link, and then select TV Shows and remove the tick mark next to Download HD when available. You should be able to download the SD version now from under this same page.
B-rock

I'm getting a message that says itunes cannot run b/c some required files are missing. Please reinstall itunes. I'm scared to, I don't want it to replace my current itunes and lose all my music!

I'm getting a message that says itunes cannot run b/c some required files are missing. Please reinstall itunes. I'm scared to because I don't want to lose my music.

Reinstalling iTunes simply replaces the application. It shouldn't affect your media. You do have backups, right?

HT4623 Am trying switch from an earlier iPhone to an iPhone4. I have had the Simcard cut to the right size and put it in the iPhone 4 and gone to iTunes. I have clicked on Restore but i get the message that this cannot be done "unknown error 1604" . What

Am trying switch from an earlier iPhone to an iPhone4. I have had the Simcard cut to the right size and put it in the iPhone 4 and gone to iTunes. I have clicked on Restore but I get the message that this cannot be done: "unknown error 1604" . What to do now, please?

Thanks, good suggestion, but after trying recommendationsthere I still have the problem of error 1604 happening and no progess.

I cannot send nor receive emails. The message I get is that I need to type in my account password which I've done but still unable to send or receive. I get texts fine

My Iphone 4 is new, and I have been able to send and receive texts, but cannot send nor receive emails. I get the message that I need to input my password for my yahoo account which I've done many times. When I type messagefor outgoing it only allows me to save as a draft. Any ideas?

Are you positive you're typing the correct password in? You might want to try and reset your password, and try again. You'll get texts because it isn't connected to your email account.

HT5167 When I try to install the update"MAC OS X Update Combined, I get a message that says it cannot be saved & connection reset by peer. What do I need to do to get this update installed. I just purchased my first iMAC and don't know anything about it

When I try to install the update"MAC OS X Update Combined, I get a message that says it cannot be saved & connection reset by peer. What do I need to do to get this update installed. I just purchased my first iMAC and don't know anything about it.

Try here:
http://support.apple.com/kb/DL1524

HT201303 I have rented 2 movies the past 9 days and they won't transfer to my iPad - error message says that they cannot be played on my iPad. I haven't watched either movie and this is the first time I have ever had this happen.

I have rented 2 movies the past 9 days and they won't transfer to my iPad (first generation). Get the same error message that says they cannot be played on my iPad. I haven't watched either movie and this is the first time I have ever had this happen after several successful movie rentals and transfers.

When you have a query please post the feed URL rather than its contents. For the record, yours is at
http://www.honywoodschool.com/podcast/44986
I don't have an iPad to test this, so I can only refer you to Apple's Podcast Tech Specs page:
http://www.apple.com/itunes/podcasts/specs.html#formattingvideo
This says that the maximum video size for an iPad is 1024x768 - your latest episode is 1280x720.
Slightly confusingly, it also says
'iPad & Apple TV can play the following video formats:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format'
which suggests that mp4 files are even more limited.
Incidentally your feed gives this URL for the media file:
http://www.honywoodschool.com/user/59/133934.mp4
However when downloaded this produces a file called 'howtosetupappeid.mp4' so soe sort of redirect appears to be in place, and these can sometimes cause trouble. It's better to link directly to the file - it's possible that the iPad doesn't handle the redirect.
That's all I can suggest: if it still doesn't cover the problem I can only refer you to the iPad forum where someone may be able to actually try your podcast and offer a comment.

Not able to install Logic on mac with OSX. 10.8.2. Error message: Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported. I have logic studio 8 software purchased in 2007 and upgraded with logic studio 9 (purchased in 2009)

After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!

Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers...

I get the message "The application "Finder" cannot be launched. -600 Read

For the last couple of days my G5 was not shutting down, so had to hold in front power button, manual sleep sometimes refused to wake and applications failed to quit. and yesterday i got the following error.
I get the message "The application "Finder" cannot be launched. -600
A reboot got things working for a bit, but on opening 'TextEdit' a document that had locked up before the reboot was displayed, on trying to save the file 'TextEdit' locked up again, trying to do a 'Preview' 'Grab' of the screen worked but then locked up 'Preview'.
So i booted into 'Safe Boot' logged in, did a virus scan using ClamXav just for piece of mind.
I opened 'TextEdit' and the same document opened as before yet i still could not save it. So i rebooted.
After reboot i opened 'TextEdit' and again the previous document appeared and this time i was able to save it. And so far no apps have failed to open or quit.
My question is, i know prior to booting into 'Safe Boot' the system fixes somethings, what does it 'fix'?
I did run the ASD (not the AHT) disk and all was ok, so thought it should be a software issue, on running TechTool Pro4 i did notice 'Finder' errors which i set to fix (just opened TechTool Pro4 and it has locked up but did 'Force Quit' unlike 'TextEdit' which has just failed to even 'Force Quit')
On looking in on the 'Console Messages' i have seen as below:
01/11/2009 09:07:44 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
01/11/2009 09:07:44 com.apple.launchd[1] (com.apple.RemoteDesktop.PrivilegeProxy) Unknown key for boolean: EnableTransactions
01/11/2009 09:07:44 com.apple.launchd[1] (com.apple.usbmuxd) Unknown key for boolean: EnableTransactions
01/11/2009 09:07:44 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
01/11/2009 09:07:44 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
01/11/2009 09:07:44 com.apple.launchd[1] (org.x.privileged_startx) Unknown key for boolean: EnableTransactions
01/11/2009 09:08:10 com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 5 seconds
01/11/2009 09:08:11 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[89]) Exited: Terminated
01/11/2009 09:08:11 com.apple.launchd[99] (org.x.startx) Unknown key for boolean: EnableTransactions
01/11/2009 09:08:23 SystemUIServer[118]
MenuCracker
see http://sourceforge.net/projects/menucracker
MenuCracker is now loaded. Ready to accept new menus. Ignore the failure message that follow.
01/11/2009 09:08:23 SystemUIServer[118] failed to load Menu Extra: NSBundle </Library/PreferencePanes/MenuMeters.prefPane/Contents/Resources/MenuCracker.me nu> (loaded)
01/11/2009 09:08:23 SystemUIServer[118] MenuCracker: Loading 'MenuMeterCPUExtra'.
01/11/2009 09:08:24 SystemUIServer[118] MenuMeterCPU loaded.
01/11/2009 09:08:24 SystemUIServer[118] MenuCracker: Loading 'MenuMeterMemExtra'.
01/11/2009 09:08:24 SystemUIServer[118] MenuMeterMem loaded.
01/11/2009 09:11:49 [0x0-0x11011].org.mozilla.thunderbird[219] Warning: unrecognized command line flag -psn069649
01/11/2009 09:12:05 [0x0-0x12012].com.apple.Safari[220] Debugger() was called!
01/11/2009 09:51:25 com.apple.launchd[1] (0x10b500.mdworker[112]) Exited abnormally: Segmentation fault
01/11/2009 09:51:33 com.apple.launchd[1] (0x10b500.mdworker[290]) Exited abnormally: Segmentation fault
01/11/2009 10:31:38 com.apple.launchd[1] (0x10b500.mdworker[291]) Exited abnormally: Segmentation fault
01/11/2009 10:31:38 com.apple.launchd[1] (0x10b500.mdworker[291]) Exited abnormally: Segmentation fault
01/11/2009 10:39:08 com.apple.ATSServer[407] FODBError: FODBRemoveFromAnnex - Got called to remove an annexIndex that does not match what is in the font
01/11/2009 10:39:08 com.apple.ATSServer[407] FODBError: FODBRemoveFromAnnex - Got called to remove an annexIndex that does not match what is in the font
01/11/2009 10:39:34 com.apple.ATSServer[407] FODBError: FODBRemoveFromAnnex - Got called to remove an annexIndex that does not match what is in the font
01/11/2009 10:39:34 com.apple.ATSServer[407] FODBError: FODBRemoveFromAnnex - Got called to remove an annexIndex that does not match what is in the font
01/11/2009 12:24:17 com.apple.launchd[1] (com.apple.smb.server.preferences) Throttling respawn: Will start in 10 seconds
01/11/2009 12:37:07 com.apple.launchd[99] ([0x0-0x2b02b].com.micromat.TechToolPro4[634]) Stray process with PGID equal to this dead job: PID 635 PPID 1 TechTool Pro 4
01/11/2009 12:37:07 com.apple.launchd[99] ([0x0-0x2b02b].com.micromat.TechToolPro4[634]) Stray process with PGID equal to this dead job: PID 635 PPID 1 TechTool Pro 4
I have an image on a firewire caddy (which has 10.5.8 bootable on it) so i can easily erase the boot drive and image back but i want to understand what is actually happening.
Is it worth running AppleJack 1.5 or similar?
You advice is appreciated.
Message was edited by: da RayMan
Message was edited by: da RayMan

Hi there,
My question is, i know prior to booting into 'Safe Boot' the system fixes somethings, what does it 'fix'?
In Tiger/10.4.x it disables Startup/Login Items, clears Font Caches, tries to repair the HD. loads Safe Drives, disables Airport & Quartz.
In Leo/10.5 it does more, but doesn't disable Airport, which now has a Sfe Driver I presume.
I suspect From the Console post that perhaps SAfe Boot repaired the HD, but of course that doesn't take care of any corruption done while it was muxed.
Run Disk Utility & Verify the HD, it at least will tell us something.
Is it worth running AppleJack 1.5 or similar?
Assuredly, AppleJack is great & won't hurt, & will eliminate a lot of questions if not the problem.

"I am constantly getting a message which says Itunes cannot run because some of it's required files are missing. Please reinstall iTunes." I've reinstalled a number of times and re-booted but it only seems to last a short time. How do I fix it?

I am constantly getting a message which says "iTunes cannot run because some of it's required files are missing. Please reinstall iTunes." I've reinstalled a number of times and re-booted but it only seems to last a short time. How do I fix it?

HI daddio,
Ok some things first I need to know...Did you use Microsoft cleanup utility to clean up all those uninstalls you have done?
I hate Norton and anyone who reads my posts will know that. I have seen way too many infected PC's by Norton users. Did you try the EWIDO and AdAware scan? I see you said you read lots of posts. That is helping folks remove the malware in order to get iTunes and quicktime back to health.

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
I took a very quick look at the app, so I may be a missing something about its capability.

Thunderbird stopped downloading emails from the web server and now when I try to add a new account I get a message to say it cannot find the email server.

Thunderbird was working and then for no reason it stopped downloading emails from the web server. I can access my emails in the web server okay. I have tried to remove my account and then add it again as a new account but I get a message saying that Thunderbird cannot find the email server. I have also tried to uninstall and reinstall Thunderbird but with the same result. I have also tried to remove the default mail server but have been unable to do so. How can I fix this?

I figured out a workaround.... Since I can get e-mails to populate via iSync and my other computer is running Leopard (it's a powerpc chip and can't run Snow Leopard), I added the account on the other computer and got the new account to populate into my SL machine with iSync. I don't like that I can't actually add the account directly, but at least this got me working.

Message no:me038 posting cannot be done directly in to GL account 410000

Similar Messages

Maybe you are looking for