Message no. MH084 (IS Retail)

Hi,
I am getting following Error Message while displaying an Article in MM42.
Error Message - "Assignment of article to merch. catgry missing in classification system".
We have checked that the Article is assigned to Merchandise Category and being shown in Table MARA also. There is no Characteristics assigned to Article for Class Type - 026.
Can anyone please advise on this issue. Please let us know if any SAP Note or Report available.
Will appreciate immediate Reply.
Thanks.
Siddhartha Panda

Hi
Was your article created by BAPI/IDOC?
Or you created additionals while creating article?
Or have you gone for reclassification of MC?
you can also check following notes
SAP Note
1304304 - MM41: Error message MH 084 after structured article listing
355156 - Error message MH084 in material maintenance
126358 - MH084:article not assigned to merchandise category
Thanks
Jitesh

Similar Messages

SAP IS Retail Outbound Idoc Creation for New Articles

Hi SAP Gurus,
Good day!
I would like to inquire if you are familiar with the necessary set up to create OUTbound Idocs to be sent to POS whenever a new article is created. I have already activated the Change Pointers for the Message Types for IS Retail via BD50. However, this did not solve the issue. I have an existing material which ably triggers the idoc change;however, when I try accessing the materials I created recently, no idocs are created.
Your help is most appreciated.
Best regards,

Hi,
Check in WE20 partner profiles > customer type KU - Customer > choose your store number > under outbound parameters all relevant message type must defined
Look at the following links for more details:
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
Hope you got answer
regards
Satish

Unable to load Dimension into Hyperion planning using ODI ?

Hi All
We are trying to load Dimension into hyperion planning Ver. 11.1.2 using ODI. We have created the interface and mapped the source csv file to target planmning application using ODI KM.
LKM file to SQL
IKM SQL to Planning
We get success in ODI's Operator but the Dimension is not updated nor new data is insreted.
We get this message in Error file:-
+
Retail Format,Parent,Alias: Default,Data Storage,Two Pass Calculation,Smart List,Data Type,Plan Type (APlan),Error_Reason
ABC,Total Format,,StoreData,,,,Aplan,Cannot load dimension member, error message is: java.lang.RuntimeException: Fetch of saved member "ABC" failed.
+
We get this message in log files:-
+
2010-07-22 07:04:06,550 INFO [DwgCmdExecutionThread]: Oracle Data Integrator Adapter for Hyperion Planning - Release 9.3.1.1
2010-07-22 07:04:06,550 INFO [DwgCmdExecutionThread]: Connecting to planning application [******] on [********]:[11333] using username [admin].
2010-07-22 07:04:06,597 INFO [DwgCmdExecutionThread]: Successfully connected to the planning application.
2010-07-22 07:04:06,597 INFO [DwgCmdExecutionThread]: The load options for the planning load are
     Dimension Name: Retail Format Sort Parent Child : false
     Load Order By Input : false
     Refresh Database : true
2010-07-22 07:04:06,612 INFO [DwgCmdExecutionThread]: Begining the load process.
2010-07-22 07:04:06,612 DEBUG [DwgCmdExecutionThread]: Number of columns in the source result set does not match the number of planning target columns.
2010-07-22 07:04:06,659 INFO [DwgCmdExecutionThread]: Load type is [Load dimension member].
2010-07-22 07:04:06,675 ERROR [DwgCmdExecutionThread]: Record [[ABC, Total Format, null, null, StoreData, null, null, null, null, null, null, null, null, null, Aplan, null, null, null]] was rejected by the Planning Server.
2010-07-22 07:04:06,675 INFO [DwgCmdExecutionThread]: Planing cube refresh operation initiated.
2010-07-22 07:04:08,425 INFO [DwgCmdExecutionThread]: Planning cube refresh operation completed successfully.
2010-07-22 07:04:08,425 INFO [DwgCmdExecutionThread]: Load process completed.
+
Please help out .....

Can you check the error log file as you have posted the log file, it should give more information to why the records were rejected.
Cheers
John
http://john-goodwin.blogspot.com/

E7 Hard reset after effects

Hi,
I installed Anti Virus software "NetQin" and after installation I restart my mobile phone but it could not restart and displayed a message "Cannot restart, contact retailer". After many tries when I failed to restart my phone (E7 : OS-Belle), I did hard reset. After hard reset I lost Photo and Video editors, ovi store client etc. I reinstalled the softrware 3-4 times but these apps are still missing. Can some one give correct way to solve this issue?
Solved!
Go to Solution.

Even the Maps functioning might have been affected .. The ONLY solution is to get the Firmware flashed at Nokia Care

Using EVM_3530.sln build wince 6.0(bin) success, but can not into win ce 6.0 os

Dear all:
I use BSP_WINCE_ARM_A8_01_02_00_Source.exe( EVM_3530.sln ) to build wince 6.0(bin) for beagleboard xm rev C,
the visual studio build success, but the beagleboard can not into win ce, I log the message by uart, my log show as
below:
Texas Instruments Windows CE SD X-Loader for EVM 3730
Built Apr 28 2015 at 13:44:21
Version BSP_WINCE_ARM_A8 1.02.00.02
open ebootsd.nb0 file
Init HW: controller RST
SDCARD: reqested speed 1000000, actual speed 1000000
SDCARD: reqested speed 25000000, actual speed 19200000
jumping to ebootsd image
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Apr 28 2015 13:
41:17
Texas Instruments Windows CE EBOOT for OMAP35xx/37xx, Built Apr 28 2015 at 13:44
:09
EBOOT Version 0.0, BSP BSP_WINCE_ARM_A8 1.02.00.02
TI OMAP3730 Version 0x00000012 (ES1.2)
TPS659XX Version 0x30 (ES1.3)
System ready!
Preparing for download...
INFO: Predownload....
NAND manufacturer 0 device 0 : no matching device found
ERROR: FMD_Init call failed!
NAND manufacturer 0 device 0 : no matching device found
ERROR: FMD_Init call failed!
WARN: Boot config wasn't found, using defaults
INFO: SW4 boot setting: 0x12
NAND manufacturer 0 device 0 : no matching device found
>>> Forcing cold boot (non-persistent registry and other data will be wiped) <<<
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
Init HW: controller RST
SDCARD: reqested speed 1000000, actual speed 1000000
SDCARD: reqested speed 25000000, actual speed 19200000
BLSDCardReadLogo: cannot open Logo.bmp
BL_IMAGE_TYPE_BIN
Download file information:
[0]: Address=0x80002000 Length=0x023a78cc Save=0x80002000
Download file type: 1
.............rom_offset=0x0.
..ImageStart = 0x80002000, ImageLength = 0x23A78CC, LaunchAddr = 0x800122F8
Completed file(s):
[0]: Address=0x80002000 Length=0x23A78CC Name="" Target=RAM
ROMHDR at Address 80002044h
Launch Windows CE image by jumping to 0x800122f8...
Windows CE Kernel for ARM (Thumb Enabled) Built on May 7 2012 at 12:47:43
OAL: CPU revision 0x12:DM3730
OAL: CPU L2 Aux register 0x400042
****Profiler Build****
---High Performance Frequency is 26000914 hz---
Does anyone know what happen?
Thank for your help, Victor

There is an option in boot loader menu to enable debug messages "Enable/Disable OAL Retail Messages". Looks like you haven't enabled it. check it.
Please mark as answer, if it is correct.
Please vote,if it is helpful post.
Vinoth.R
http://vinoth-vinothblog.blogspot.com
http://www.e-consystems.com/windowsce.asp

6680 stratup failed

hey guys any one knows about 6680 startup failed problem.
my mobile was ok last night now gievn me message startup failed contact retailer... please help me

This happens when the phones software has been corrupted or if it's suffered a hardware failure.
All you can do now is try a hard reset but all data from the phones memory will be lost. I do not know of anyway to recover it's data.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, press the power button and switch on the phone.
4. Release when the phone shows the nokia logo or shows other signs of life like the language selection screen.
If that feels to fix it visit a nokia care point for repair.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA • Canada
Elsewhere: Click here, select your country, go to the support section, then select repair.

5530 no start up

my 5530 no start up even after flashing it.the message is contact to retailer.maybe it losts the serial no or server.help please.HELP

ONLY solution is visit Nokia Care

IDOC message type for "Site" in SAP Retail module?

Hi All,
We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction: WB01, WB02). Does anyone know if there's an IDOC message/type already associated with this? Thanks in advance for your help!
Cheers,
Matt

Hi,
please read SAP notes 892103 and 551035.
The correct IDOC type should be FIDCC1 / FIDCC2.
Best regards,
Andreas

Idoc types and message types we use in IS-Retail

hi gurus,
can anyone tell me what are the idoc types and their message types that we use in SAP IS-Retail .
Thanks in advance
regards
gopal

Hello, these are the main idoc types used in sap retail:
'WPDBBY01' POS outbound: bonus buy conditions
'WPDCUR01' POS interface: Download exchange rates
'WPDNAC01' POS interface: Download products
'WPDSET01' POS interface: Download set assignments
'WPDTAX01' POS interface: Download tax rates
'WPDWGR01' POS interface: Download material group master
'WPUBON01' POS interface: Upload sales docs (trnsctns), non-aggregated
'WPUERR01' POS interface: Upload messages SRS/POS/SCS
'WPUFIB01' POS interface: Upload Fin.Acc. interface SRS/POS
'WPUKSR01' POS Interface: Inbound processing cashier data for POS stats
'WPUTAB01' POS interface: Upload day-end closing POS
'WPUUMS01' POS interface: Upload sales data (compressed)
'WPUWBW01' POS interface: Upload goods movements
'WP_EAN01' POS interface: Upload/Download EAN assignments
'WP_PER01' POS interface: Upload/Download person data
'WP_PLU01' POS interface: Upload/Download article master
'WP_PLU02' POS interface: material and condition (inbound and outb.)
'WTADDI01' Additionals
'WVINVE01' Store phy.inv.: phy.inv. docs outbound; count data inbound
'WVINVE02' Store phy.inv.: phy.inv. docs outbound; count data inbound
'W_WGRP01' Distribution of material groups
Regards,
Juan Carlos

Error message MH084 Assignment of material to material group missing in classification system

hi dear expert
we are encounter some issues, when we are edit/display a generic article, error message popup show MH084, as below picture
we has been search this issues from our forum, some thread like this:http://scn.sap.com/thread/1027185, but we are ensure that we are create generic article by IDoc: ARTMAS06, some guys mentioned do this can avoid this error.
and yet, we found something maybe this why error message popup, when we are display article & merchadise group & charct. profile relationship by transaction code WGUS, all of the article popup error message, there are no relationship with profile relationship .
so, our question is how can we create generic article to avoid error message (using idoc), and how can we to fix relationship between article & charact prifile.
thx.

We are receive replied from SAP, Customizing-functional is the root cause of error. This function interfere SAP standard function module CLAP_DDB_INIT_CLASSIFICATION to update classification table.
sorry and thx all of you reply.

I cant access my bank account since having firfox always get error message and it now says retail.santander.co.uk : server does not support RFC 5746, see CVE-2009-3555 does anyone know what i need to change thanks

i keep getting an error message and i know its to do with firefox but have also gone into one of the settings and it says the following retail.santander.co.uk : server does not support RFC 5746, see CVE-2009-3555 but not what to do now??

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Error_loading_websites
The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers and visitors like you can ignore that warning.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation

HT201328 I bought iPhone on eBay but its IMEI is still linked with an existing AT&T account. Seller doesn't reply on my messages. As far as I know this eBay seller isn't a contract holder. It's just a second-hand shop. I have retail box but don't have a r

subj
I bought iPhone on eBay but its IMEI is still linked with an existing AT&T account. Seller doesn't reply on my messages. As far as I know this eBay seller isn't a contract holder. It's just a second-hand shop. I have retail box but don't have a receipt
AT&T support can't unlock it until its IMEI is in use on a customer account. What I can to do?

Nothing you can do, if you the seller won't respond to you. Sell it back on Ebay. Lesson learned, only buy iphone from an authorized apple dealer.

Message no. CZ160 - Select a valid release strategy - IS Retail

while assigning PR release strategy to site thru' "Determination of Release Strategy" under tcode WB02, i am getting following error message.
Select a valid release strategy
Message no. CZ160
Diagnosis
The release strategy 01 is not defined.
Procedure
List the permissible values using F4, and choose a valid release strategy.
FYI, i configured PR release strategy "01" with required config. requirements and checcked the same thru' simulation and it is working fine.

Hi,
Please follow the steps;
1. Create characteristics via tcode CT04
2. Create Class for class type 032. Via tcode CL02
3. Then go to SPRO -> MM -> Pur -> PR -> Release Procedure with Classification -> Set up procedure. create release group, rel obj, class 032.
Next, set up release codes followed by release indicator.
Then the release strategies.
4. go to tcode CL20N to assign the release group and release strategy to the class and class type.
5. SPRO -> MM -> Pur -> PR -> Release Procedure with Classification -> Set up procedure -> Check Release Strategies

Idoc message for distributing site groups/site hierarchy in retail env

Hi,
I am trying to distribute site group data (hierarchy: brand, territory, region, district, site) using an idoc. Does anyone know what idoc message/type I could use to do this?
Thanks!
Leticia

Hi Bhoopal,
Go to Tcode WE19 and enter the Failed Idoc number(can be seen in WE02)
Go to Segment E1WPB04 and Double click on it you will see the Tax code and Tax Amount displayed.Change the Tax code as per what you have maintained in your Article master for eg : 0 - No Tax,1-Full Tax,2-Half tax etc.
Then Click on Standard Inbound and that should generate a new idoc and then check the status of the newly created Idoc whether it gets posted succesfully(With status 53)
NOTE : Make sure you used the correct currency since based on the country specific tax classification it might expect different tax rates(in case you maintained different tax rates based on the country)
Hope it helps
Best Regards,
Aram K.

Last time i bought iwork retail v9.0.3, then i tried to install it but it kept showing the error message. After i updated my mac, the iwork asked for a serial number and until today i can't use any of the iwork application. How can i solve this problem?

Hoping for a solution since i need to have this iwork to 'work'.. Too many assignments need to be done and i am sick of going to the library to use the desktop there. Thank you =)

I think you have two separate issues & I'll try to answer in the order you need to address them.
First, it seems you have/had the trial of iWork '09 installed. It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This has changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Next, you need to update iWork '09 to 9.0.5. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work.

Message no. MH084 (IS Retail)

Similar Messages

Maybe you are looking for