Message no. QA495 with retunr delivery Mvt 655

Hello,
I am not expert on quality module, can you please help to analyze the following error message i am getting when performing a retunr delivery with schedule line Mvt 655 GR in quality status.
The material i am using has an inspection type similar to 08 (standard stock transfer inspection).
Do you know why this error is appearing and how i can resolve it? any Idea?
Thanks for help
Regards

hi,
Mvt type 655 is used for customer retrun in QI stck, for this either u may use 06 if u don't want stck relevant lot or u may use 05 if u want stck relevant , this is ur config settings. now, as u said this error will be there than chekc ur QA32 , may possible some lots are pending during RR, check lots status if it is UD ICCO SPRQ than clear the lot from quality.
This error will come only when ur stck is available in QC and u want to deactivate some inspection type from Material master. than system will ask u to remove ur stck first from QC and than change or remove the inspection type.
Secondly, this error will come if u want to take the reversal of some material document and stck lying in QC w.r.t it, than again system ask u remove the Stck from QC only, for this u need to take the UD reversal and then reversal of that material document is possible.
Regards

Similar Messages

An item with no delivery quantity is not permitted. Item will be deleted.

Sales order created, the schedule lines are confirmed for the delivery date and qty
order is not blocked for delivery
order is complete
still while creating delivery get a error message
An item with no delivery quantity is not permitted. Item will be deleted.
Message no. VL367
stock checked through MMBE that is also available in unrestricted use
kindly guide

Check this thread
[Re: Mesaage : while creation of delivery : An item with no delivery quantity|Mesaage : while creation of delivery : An item with no delivery quantity .);
In MMBE though the stock shows under Unrestricted column, it also includes delivery created and saved without doing PGI. So check in MD04 any delivery reference is flowing.
thanks
G. Lakshmipathi

Issue with Message Type Triggering during Inbound Delivery Creation

Hi Experts,
Hi Experts,
Currently we are facing issue with message type triggering during inbound delivery creation:
In NACE transaction for Inbound delivery we have 3 custom output types:
Pricing Procedure Used is standard one -> E10001
Z140 Inbound Delivery Create (This should get triggered when IB delivery is created)
Z141 Inbound Delivery Change (This should get triggered when IB Delivery is changed)
Z142 Inbound Delivery Delete(This should get triggered when IB Delivery is deleted).
At present if i check delivery in VL33 -> Extras -> Delivery Output
Both Z140 and Z141 are being triggered during IB delivery creation. While it should be only Z140.
Could you please suggest that are we missing any configuration in SPRO or we need to create any custom routine (requirement) to handle this?
Thanks

Hi,
There is no fine-tuned control for inbound delivery messages as for Purchase order. Hence I guess to meet your above requirement, you have to go for a custom solution similar to the PO fine tune control settings.
Thanks,

Error message while creating an inbound delivery to generate an idoc

hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leo

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Enter a country for partner 4000053932 with type 'Delivery Point'

Hi Friend,
I had set up new company code in SAP (R/3) and MySupply
Also updated comapny code parener in BP t-code
But i am getting error while creating shopping cart
Saying that" Enter a country for partner 4000053932 with type 'Delivery Point' (Item Set up test )"
Can any one help on this
Thanks
Shrinivas
Edited by: Shrinivas Siddapur on Mar 6, 2008 3:32 PM

I am closing the message.
The issue has been resolved with the help of note:597475

Error message M7 330. u201CPrice of goods mvt will become negativeu201D in MIGO

Hi Experts,
Good day!
I would like to ask question regarding transaction MIGO upon doing transaction MIGO i was able to arrive in an Error message M7 330. u201CPrice of goods mvt will become negativeu201D. Can you help me what are the cause why i arrived at the error?
Hope to here from you all.
~Thanks so much!
lourd

Hi,
Have look into the link, might be useful to resolve the issue.
I think this situation can arise only if u have allowed negative stocks, in such case , it is possible that fresh GR is making the MAP -ve which is not allowed. Then as suggested u have to do MR21 to revalue the material to ensure MAP does not become negative after fresh GR.
Check the OSS note
if you can't solve the problem with MR21 then pls apply the note430954 (report MBEKBEAN should be in the system),
Regards,
Aditya

Inbound IDOC to post goods receipt with inbound delivery as reference

Kindly let me know the message and IDOC type for
Inbound IDOC to POST GOODS RECEIPT with inbound delivery as reference
I tried using WMMBXY but it didn;t work.
Pls let me know asap.Your help is appreciated.
Thanks and Regards
Priti
Edited by: Priti Adukia on Feb 11, 2008 4:48 AM

Hi Nicole,
What I've to do is quite the same as the case. Outbound and Inbound are in the same SAP system. If I've good understanding, I must set partner profile as follows :
INBOUND - Parter LI with
                        Message DESADV
                        Operation code DELS
OUTBOUND - Partner KU
                        Message DESADV
                        Operation code ???
Please advise
Suchart

How to display error messages in BAPI_PO_CHANGE with PO and item ?

Hello Friends,
I am calling BAPI_PO_CHANGE to update delivery flag for 50 POs.
Each PO has 4 line items. For ex.
10001 10 5.00 material1 X
10001 20 45.00 material2 X
10001 30 22.00 material15 X u201Cerror
10001 40 45.00 material41 X
10002 10 46.00 material17 X
10002 20 25.00 material3 X u201Cerror
10002 30 75.00 material5 X u201Cerror
10002 40 44.00 material8 X
u2026u2026u2026u2026u2026..
u2026u2026u2026u2026u2026
Now, suppose some line items have error.
I am able to get it from BAPIu2019s RETURN table.
But how can I display that error message with PO and line item?
NOTE : I am calling BAPI_PO_CHANGE for each PO with ITEM internal table.
Please guide me.
Regards
RH

The it_change_return fields parameter and row identify the PO_ITEM.
Try this...
*& Form READ_MESSAGES_OP_CHANGE
 BAPI_PO_CHANGE Return messages
FORM read_messages_op_change .
DELETE it_change_return WHERE type = 'W'.
DELETE it_change_return WHERE type = 'I'.
LOOP AT it_change_return ASSIGNING <is_change_return>.
 IF <is_change_return>-type = 'E'.
 z_error_flg = 'X'.
 ENDIF.
 v_item = v_item + 1.
 it_log_mess-packagenr = v_packagenr.
 it_log_mess-object = v_object.
 it_log_mess-docnum = v_docnum.
 it_log_mess-itemnr = v_item.
 it_log_mess-type = <is_change_return>-type.
 it_log_mess-id = <is_change_return>-id.
 it_log_mess-mnumber = <is_change_return>-number.
 IF <is_change_return>-parameter <> 'POITEM'.
 it_log_mess-message = text-po1.
 REPLACE '&' WITH z_po_number INTO it_log_mess-message.
 CONCATENATE it_log_mess-message <is_change_return>-message
 INTO it_log_mess-message SEPARATED BY space.
 ELSE.
 READ TABLE it_change_poitem ASSIGNING <is_change_poitem>
 INDEX <is_change_return>-row.
 it_log_mess-message = text-pr2.
 REPLACE '&' WITH z_po_number INTO it_log_mess-message.
 REPLACE '@' WITH <is_change_poitem>-po_item
 INTO it_log_mess-message.
 CONCATENATE it_log_mess-message <is_change_return>-message
 INTO it_log_mess-message SEPARATED BY space.
 ENDIF.
 it_log_mess-message_v1 = <is_change_return>-message_v1.
 it_log_mess-message_v2 = <is_change_return>-message_v2.
 it_log_mess-message_v3 = <is_change_return>-message_v3.
 it_log_mess-message_v4 = <is_change_return>-message_v4.
 APPEND it_log_mess.
ENDLOOP.
ENDFORM. " READ_MESSAGES_OP_CHANGE

Combining 2 Sales Orders - 'Complete' with 'Partial' Delivery into 1 Delv

Hi folks,
I have a typical requirement from my client and it is as follows:
My client want to combine 'Sales Orders' marked with 'Complete Delivery' indicator(VBAK-AUTLF check-box is checked) at the Header -> Shipping, with Sales Orders marked for 'Partial Delivery' (VBAK-AUTLF is not checked) in the Header-> Shipping.
Although all the other business conditions/fields values at the Header levels,like Ship-To_party, Shipping Conditions, Incoterms, etc. are same across both these Sales Orders; SAP as a standard Business Process Flow, doesnot allow COMBINING of 2 such orders into a SINGLE Delivery, since their 'Headers' seem to differ for that ONE field value.
I have searched through all user-exits, SAP Help forums as well as OSS notes to get a solution to this problem but could not find any (bad luck).
Will anyone of you who has come across this particular scenario or know a way to get around this problem, be able to contribute with his/her ideas? I would be
grateful, thanks in advance.
Regards,
Shripad

Hi iim nava,
Thanks for your reply.
However in our case, the system does throw that error, when i try to combine the second order (partial) into the delivery created for the first order (complete).Here is the log for your reference, when I try to add the second(partial so items) into the delivery created for the first (complete delivery SO):
Diagnosis
 Item 000010 cannot be shipped in the same delivery with the
 other items in the document because the header data (AUTLF)
 is different. The field AUTLF for the item has the value &4,
 yet in the delivery it has X.
System Response
 The system issues this message if a delivery split is
 necessary.
 This message either appears in the collective processing log
 or during creation of outbound deliveries from projects or
 for subcontracting. It informs you that the item specified
 will be shipped in a delivery other than the delivery that
 includes the other items from the same document. If there was
 a general problem with shipment of the delivery, a different
 message appears.
 If this message appears when you are creating an outbound
 delivery with reference to a sales order in the foreground,
 it indicates that the order item cannot be shipped with the
 current outbound delivery.
By any chance, did you actually try simulating my scenario in your system. If you have and the same works fine in your system, then pls help me by sending your 'copy control' settings, to help me compare. We run SAP 4.6 and my settings for copy control are as follows:
LF <-> OR (Header):
 Data Transfer (VBAK) = 001 [HEADER]
 Data Transfer HU = 000 [blank]
 Order Requirements (VBAK) = 001 [HEADER]
 Combination Requirements = 651 [051 w/o Comp dlv]
LF <-> OR <-> TAN (Item):
 Item Data = 101 [ITEM]
 Order Requirements (VBAK) = 101 [ITEM]
 Business Data = 2 [BUSINESS DATA]
 Buss Data Reqmt = 151 [COMBINATION]
Hope the feedback can you will help me solve my problem. Thanks once again.
Regards,
Shripad

Batch needs to be created 1st then post goods receipt with inbound delivery

Hi,
We are having split valuated materials with batch managed, we need to post goods receipt with inbound delivery.
When we create inbound delivery with PO batch is blank which is correct.
Now when we try to post GR with IBD in VL32N we need to put batch, but we are getting error message as batch is not available in receiving plant.
In this case we have to create batch 1st with MSC1N and then we can put batch number in Vl32N and can post GR.
If material is not split valuated we can put batch manualy(Without creation in MSC1N) in VL32N and it is allowing to post GR with batch.
Can you please let me know this behaviour, is there any SAP note available about this behaviour.
Thanks
Sudhir

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Message Type - STTPOD with Process Code as - OPOD

Dear All,
I am using Standard Message Type - STTPOD with Process Code as - OPOD and Basic Type as - DELVRY03
I am creating a New "Z" Segment Copy of "E1EDL20"
I want to Add in one FIELD
EKPO - ELIKZ which is Delivery Complete INDICATOR
How can i fetch data when the IDOC is generated and to take the value from this FIELD.
Is there any Userexit or BADI
This we are doing so as we can pass message to SNC for GR Done and Completed
Regards
Amey Kulkarni

Hi Amey,
As you are using Standard Message Type - STTPOD with Process Code as - OPOD and Basic Type as - DELVRY03
There is no need create Z-field or any implementation of Userexit or BADI for GR updation in SNC.
In SNC for updating PO GR status you need to maintain below validation settings:
TCode:SPRO>Supply Network Collaboration>Basic Settings>Validation>Own Settings-->Maintain Settings in Validation Profiles
Validation profile=POC1
Validation check=PO_OPENQUAN_FROM_ASNGRQUAN
Check status=Inactive
Validation profile=POC1
Validation check=PO_OPENQUAN_FROM_ASNQUAN Inactive
Check status=Inactive
Validation profile=POC1
Validation check=PO_OPENQUAN_FROM_POGRQUAN
Check status=Active
save the setting.
Regards,
Niikhil

IDoc Message Type to create Inbound Delivery + Confirm + GR

Hi Experts,
I need IDoc message type which can create Inbound Delivery / Confirm / Create GR with Inbound Delivery as reference and i dont want to use DELVRY05
because I need to create Inbound Delivery / PICK / Confirm but not with Transfer Order Creation means Unnecessarily we dont want to create Transfer Orders. We need to exclude Transfer Orders and create GR.
Please do the needful.

Dear Kishore,
It's possible via writing code in enhancement spots of transaction code VL31N, MIGO_GR/MB01.
R,
Amala

GR with Inbound Delivery

Hi everybody
I have problem with Inbound Delivery
- I created PO with confirmation control key = ANLI.
- After that I created Inbound Delivery refer to PO.
- When I post GR, system says there is no item selected.
- I go back to Inbound and see that Pick qty = 0.
- I tried to create TO to pick full quantity but error msg:
An internal error has occurred (L03T 0154 H )
Message no. L3705
Diagnosis
No screen sequence control is defined for the argument enclosed in parentheses in the error message.
Procedure
Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.
Do you know what i have to do to fix this problem?

No body help?
I have tried to create other PO with other Vendor - same material. After create DO, it auto fully pick, then i can process GR,
I think the problem is Vendor. I create new Vendor by copied from that Vendor but DO still have the same problem. do you know what i have to check for this case?

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Internet Download error message: the connection with the server has been reset

With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

Message no. QA495 with retunr delivery Mvt 655

Similar Messages

Maybe you are looking for