Message no. QE214,No characteristics were found

Hi,
I did RR for a lot with inspection type 01.
i valuated and closed all MIC.after saving the result recording again i i want to see the result in QA32 tab(change-display,Shift+F1),i am not able to see any results what i recorded.
getting Msg-
No characteristics were found
Message no. QE214.
Pls suggest me.

Hi
Come out and go again in the QA32 & click again on 'Result' Button( you might be again in QE01 thats the reason for getting the error).
Or You can see the results in QA33 also, Click on 'Result Button'.
You can also see the results in Usage Decision screen ( click on 'Characteristics')
Thanks
Sachin

Similar Messages

No characteristics were found

Hi Experts,
Can anybody please help me,
I have confirmed production order operation wise. Stock post to Quality inspection stock.Now I want to do result recording & Usage dicision in QA32. But system shows error No characteristics were found
Now I have maintain characteristics for operation. So how I can do RR & UD.

Dear Sir,
Thanks for quick reply.
I enter Inspection lot in QAC3.when I goto enter system throw following error.
You have already recorded confirmations for the insp. lot
Message no. QA071
Diagnosis
You have already made a completion confirmation for the QM order that is assigned to the inspection lot
System Response
You cannot cancel the sample calculation for the inspection lot.
Now I have cancle confirmation for order.
Edited by: Raja S on Dec 24, 2008 11:41 AM
Edited by: Raja S on Dec 24, 2008 11:42 AM

HT201302 What if I get a message "No photos or videos were found on this device" though I know there are hundreds of photos on my iphone?

I have hundreds of photos that I have taken using the Camera and Camera + apps on my iphone 4S, and am now trying to copy those photos on to my Thinkpad PC (Windows 7). But I get a messge "No photos or videos were found on this device". Not sure what I am need to do to copy the photos. Appreciate any help.
Thanks.

It sounds like you are using an application to import. You can do it manually.
Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

Import AOL Communicator mail failed. Error: no valid mbox files were found

I´m having problems to import (archived) AOL Communicator mail messages into Mac Mail. After choosing File > Mailboxes > Import data from "Other" and then selecting the the folders "LIbrary" > "Application Support" > "AOL Communicator" > "local" > "Archives.sbd", I always get the error message: no valid mbox files were found.
(Actually the Received and Sent files in the Archives.sbd subfolders are NOT highlighted, even though the Archives.sbd and it´s subfolders (like myaolmail.sbd) are.)
Mac Mini Mac OS X (10.4.5) AOL Communicator for Mac
Mac Mini Mac OS X (10.4.5)

Hi,
I am in the same situation (just posted myself!), and am trying this out right now:
http://www.apple.com/downloads/macosx/internet_utilities/aolserviceassistant.htm l
Maybe it will work for you?
Good luck,
Allyosn

RU255 : No incorrect confirmations were founds

Dear Experts,
When a user log him on the system, the information message "RU255 No incorrect confirmations were founds" appear automatically, before to become on the SAP Menu.
I've found the transactions CN30 (project) or IW36 (maintenance&services) which have the same effect (Sales -> Product cost by sales order -> Actual posting -> time sheet -> Transfer -> Post processing confirmations)
Can someone explain me the reason of the apparition of this message at this time and how can I prevent it without a desactivation with transaction SE91?
Thanks a lot for your assistance.
herieric

Hello Mr Lakshmipathi,
Thanks for your answer.
We are actually working on version ECC6.0. This note is dated from 2002 and is not precisely relevant with my problem.
I've also see the note 370387 (2001 but more relevant), but the problem isn't solved yet.
If you have an another idea... thanks in advance.
Regards.
herieric

No suitable plugins were found when trying to install plugin for watching video

When trying to watch videos on my web site (www.ruivilela.com), they won't play. I get a message that a plugin is needed. When I click on Install plugins, I get a message that no suitable plugins were found.
I really don't know what to do because I cannot even find out which plugin(s) is/are missing... I have uninstalled and re-installed Flash...
Does anyone know anything about this?
Thanks!

That may be mp4 media files that are played by the QuickTime player.
*https://support.mozilla.org/kb/Popular+plugins

406 No acceptable objects were found & Not Acceptable

Hi,
I've checked a XML-file (being at my server) by http://wapsilon.com and got the following error-message: 406 No acceptable objects were found
I've also tried it with my mobie (Siemens S35) and got this error-message: Not Acceptable
Within my xsl-Sheet, which is referenced by the xml-file, I'm using
<xsl:output method="xml" encoding="iso-8859-1" doctype-public="-//WAPFORUM//DTD WML 1.1//EN" doctype-system="http://www.wapforum.org/DTD/wml_1.1.xml"/>.
Do you have any idea, what could be wrong - or which permissions I have to set at my server?
Bye
Chris

I am replying to myself :-) because I couldn't edit my own post.
I copied gcc from /Developper to /usr/bin, where it wasn't present (I assume it was not installed by Xcode).
When I try (again) ./configure, I get in Terminal:
checking for gcc... gcc
checking whether the C compiler works... no
configure: error: in `/Users/admin/gnupg-2.0.19':
configure: error: C compiler cannot create executables
See `config.log' for more details
So gcc is found, but it cannot create executables.
Does all this mean that copying gcc to /usr/bin is not enough, and that I have to include gdd in $PATH?
All help will be greatly appreciated.

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

HT201302 When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

It sounds like you are using an application to import. You can do it manually.
Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
Please help

Check your login items in the Users & Groups preference pane. Remove any that you don't recognize.

Error message - "Overlapping validity areas were found for country BR"

Hi Experts,
For a certain output type Y953 (e.g. for the shipment 2002355665 related to the DN 3087912658), an error message "Overlapping validity areas were found for country BR" is coming in as error.
The error message is appearing during the idoc processing of the shipment.
This is an incident of Dangerous Goods.
I would like to know if it is technically / functionally possible to find out as to why exactly this mesage is coming and how can we rectify the problem.
From technical point of view we checked that this message was not being called in the SAP system but was dynamically called.
kindly let me know of any breakthrough as this issue is critical as dangerous goods are being transported without needed documents printed.
Thanks in advance.
RIttik

Check whether note 836139 helps you.
thanks
G. Lakshmipathi

Message: No additional applications designed for your device were found

I'm trying to add a program onto my blackberry Pearl using Desktop manager & I get the message: No additional applications designed for your device were found. Help! Thanks in advance!
- Lola

Hi
I have the same problem with a 8310 on Vodaphone. I had a quick look on the link given but it didn't list my phone and doesn't appear to cover Vodaphone.
Do you know where I can find the software I need ?
Thanks
Thanks
Rog

Notification print Error message :- No entries were found in the Cataloge T

HI All ,
when printing the notification throgh the transaction ISQ2 , I have released the Notification as well the task , even i have tested to complite status also , but when i am going to Pint the notification i am getting the error message like no entries were found in the cataloge T.
Is there any custunization missing or the possibility of autherisation issue , i have checked the cataloge & assignmnet also in cust , it is proper ,
Regards
piyush

resolved throgh debugging , the short text & long text is not maintain for the Catalouge.

Cant use Kuler. Sorry no items were found message

Hi all,
After using kuler for a while, I reinstalled AIR and now I cant connect to kuler. I get "Sorry no items were found", and the application seems to freeze since i have to end the process to close it. BTW, another weird behaivor is that im able to login, but after succesfully loging in, it doesnt do anything.
Any clue? Im running Windows 7 and I googled the solution but only found it for Mac. (yes, i should get a mac, i already know that)
thanks in advance
E.

Hi Gajanan,
Sometimes what happens the documents get cleared at a later date than the date you are viewing them as open item in the G/L Account so system show those line items as open. Please check the documents if they have a clearing document number. If so then see the date of clearing. This will answer your question.
Regards,
Sanjay

Can't install itunes - error message "the folder "itunes" cannot be found

Help. I just bought a new Iphone and can't get itunes to load. I had itunes on my computer for several years for my nano - haven't synced up in about a year. Went to open it and got the following error message
The folder "itunes" cannot be found or created and is required. The default location for this folder is inside Mu Music folder"
I have uninstalled everything - quicktime, apple mobile, every single file. I have rebooted, run searches to make sure there were no files at all left - did it through control panel, search etc., rebooted and downloaded it again (this make about 5 times now) and still get that same message that the folder cannot be found. Help! I just blew about $400 in the Apple store!
Can anyone help me?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Message no. QE214,No characteristics were found

Similar Messages

Maybe you are looking for