Message no. R1286 when starting initial load again

When I start the initial load again ( Customer_main from ECC to CRM ) , after changing the ppoma structure to make sure all data is there, for all customers that already have been replicated in the past I get the Message R1286 :
Business partner XXXXXX already exists. (CRM 7)
While this statement is ofc correct, the customer does already exist, in the past the customer was updated, and the bdoc processing status green. We have upgraded from SP4 to SP8, and now the error message is shown and the bdoc is not processed.
Has something changed ?
How do I update all my customers to reflect changes in filters / PPOMA or just update them to fix small replication problems.
I have the same message when I start a request instead of an initial load.
Thx !!
Edited by: Olivier Priem on Nov 25, 2011 1:54 PM

Any help is welcome ...

Similar Messages

Error appearing in start initial load

Hi Experts,
I am getting an error during execution of the transaction 'R3as' (Start Initial Load). I am using the load object 'IPMBEAPRDSLS'.
When I am running the trasaction, system is throwing the error meassage "Initial Load is already running(or waiting), IPMBEAPRDSLS: object will not be loaded"
Kindly suggest some solution of this problem.
Thanks & regards,
Rupam.

Hello Rupam,
Abort the load of that object in txn:R3AM1.
Also, delete the queue entries like R3AI_<OBJECT_NAME> in txn:SMQ2.
This would let you to restrart the load again.
If again it goes to WAIT state , then it means that you do not have enough number of work processes to handle this load.
It happens if several other load are running.So you have to wait till other loads get finished or you need to increase the work process, if your hardware supports.
Hope this helps!
Best Regards,
Shanthala Kudva.

'User is Locked' error while trying to start initial load

While trying to start initial load of objects using R3AS, I am receiving error msg 'User is locked'. This rfc user is a dialog user with SAP_ALL. I even tried replicating using a new user, but ended up with same error. The user is not locked but still getting the same error msg via status 'SYSFAIL' in the queue. Any suggestions?
Thnx,
- AJ.

AJ,
The RFC user must be a <b>communication user or a system</b> user. I think you mentioned the RFC user is a dialog user, which would be wrong settings definitely.
Also as mentioned by Marcin, ensure the passwords in the RFC destination of SRM and R/3 are the same as the passwords in SU01 of the respective systems. To ensure this, click on remote logon for the RFC destination in SM59. If the screen doesnot change, this means your systems are connecting through the RFC user without any problem.
Please assign points, if answer is usefull !!
Sundeep

Youtube loading bar is not responding and the videos stop and start re-loading again and it doesn't move again.

When I start loading a video, it either load the entire bar and freezes or it freezes while in the middle. When it tries to load again it just won't start and I have to refresh but it still freezes up. Also when I try to pause the vide it doesn't respond as well.
Its not the html5 trial as well as you see the print bellow.
The WebM is not supported. I don't know what that means.
What does my browser support?
Video tag
h.264
WebM
You are not currently in the HTML5 trial.
Join the HTML5 Trial
I did empty the cahe and history and still didn't work.

I forgot to mention, it does happen the same on Firefox.
I do have the latest flash as well.

Error when start Map Loader

I found Error message, and asked me to start the application again, every time I start Map Loader version 1.2 (latest).
I installed, and was asked to install also NET Framework 3.0.
Some people said the error casued by NET Framedwork, but I could not run Map Loader without it.
I tried reformat my E61i and its memory card, but the problem occured the same.
Anyone facing the same problem? Any recommended solution?
Thank you for your help in advance!

You might not be able to download the .net framework 3.0 correctly using the installer for maps loader. Try this:
Download and install the .net framework 3.0 from this location ---> http://download.microsoft.com/download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe
Then try to install the Maps loader again, this time it will not ask you to install the .net framework.
~ the lost viking ~

Message "Error 4 when starting extraction program" with any extraction.

Hi to everyone.
We have a problem in a pre-existing BW system of development.
When we start any extraction (for example 0MATERIAL_ATTR), the monitor give us the following error:
ERROR 4 WHEN STARTING THE EXTRACTION PROGRAM (R3-19).
I've checked the link between the two system, and it may be right. When I check the soursystem from BW I havn't any error.
Then, when I test the extractor on R/3 with RSA3, any error as result and the tester extracts a lot of records.
Anyone have any idea ?
Max

Thanks for your fast help.
Claudio, the messages are only two ...
- Error 4 when starting the extraction program
R3 19
- Errors in source system RSM 340
No dump on the R/3 and BW.
Roberto, I've followed the note 325470 too, but the problem remain. Only one ... the note 147104 say ...
"This server must be capable of starting a background process for data extraction".
Is there a way to check this point ?
Thanks in advance guys.
Max

My iPhone doesn't want to activate when start it on again

When I restarted my iPhone it dosen't want to activate the iPhone. It says that i could use iTunes but it dosen't work either. What can I do to make it work again?

If it says to connect to itunes on your computer be sure you have iTunes 11.1 or later on your computer.

HP designjet Z3200ps that goes into error message 79.04 when trying to load paper.

The Designjet Z3200ps powers up and comes to ready and ask to load paper. It starts to take the paper and the carriage unit scans back and forth then the display shows error 79.04. I've upgraded to the latest Firmware, But it still does the same thing. Does anyone have any other answers. Thanks

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I can no see my browser when attempting to load I get a message it is installed how do I fix this?

I can not see my browser on my phone when attempting to load again I get a message already installed. Also I can not locate Safari to load it back on either. Thanks for your help

See if this helps locate your browser...
Reset your Home screen to the default layout:
Choose Settings > General > Reset and tap Reset Home Screen Layout.

TS3623 Why is it when I rent a movie from Apple it takes all night to load & then when I try to play it has to load again? Netflix just takes a few seconds to load & play In the same [Apple ] device !

Why is it when I rent a movie from Apple it takes all night to load & when I try to play it starts to load again for a while before it plays ? Netflix loads & plays in seconds [ usually] in the same device!

Welcome to the Apple community.
One of the main reasons this occurs is because Netflix uses a feature called adaptive quality and iTunes uses a fixed quality. Netflix is able to reduce its quality to such an extent when it detects that you have a poor Internet connection that the data rate of the movie is as low as 0.5 Mb per second, on the other hand if you have chosen to view an HD movie from iTunes U have chosen a movie with a data rate as high as 5 Mb per second.

"Business Catalyst" error message when starting Dw

Hello,
Since a yesterday, I have this error message (in french) when starting Dreamweaver.
"Lors de l'exécution de onload dans BusinessCatalyst.htm, la ou les erreurs Javascript suivante ont eu lieu - Dans le fichier "Business Catalyst : bcinit is not defined".
A few days ago, I started to have some errors message when opening any page of my website.
"Les traducteurs suivants n'ont pas été chargés à cause des erreurs :
ASP.htm : dispose d'informations de configuration invalides.
ColdFusion.htm : dispose d'informations de configuration invalides.
PHP_MySQL.htm : dispose d'informations de configuration invalides."
I've open an old website, those error messages still existing.
Does anybody have an idea ?
Thanks for your help.
Hugo

BC Status
Nancy O.

Unable to create the temporary folder. Error 183 when starting Distiller

New information discovered - see end of message!
Full error message is (window title is Acrobat Distiller):
"Unable to create the temporary folder
Error: 183 - cannot create a file when that file already exists."
I have no idea what file or what folder it is referring to. This is on an x86 Vista notebook and the message comes up when starting the notebook and also if you manually start Distiller 8. Updating did not help, nor did turning off the UAC, or running Distiller as Administrator. In the latter case, Distiller will open correctly, but the next time you need to use it, it fails. With the UAC turned off, the behavior is for it to show the Distiller window for a fraction of a second and close immediately. I also gave the user full rights to the C:\Program Files\Adobe folder and lower. Made no difference.
Coincidental with this is that the PDFMOfficeAddIn.dll add-in will not enable in Word - when it is checked, and I hit OK, I get the message:
"The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed."
All of this is going on when logged in as an administrator. I have seen folks post about this issue, but no answers that actually fiux the problem, just suggest what I have already tried. Anyone seen this one?
The user is highly mobile, so I am not going to have a chance to work on her computer again until next week.
NEW INFO
I tried removing and reinstalling as administrator and the problem remains. However while trying to troubleshoot, I discovered some more details.
The message is being thrown when acrotray.exe is started as a process in HKLM\Software\Microsoft\Windows\Current Control Set\Run and then tries to run acrodist.exe (which fails, BTW). If I don't let it run there and run acrotray,exe as administrator, then acrodist.exe runs as a process without an error. Additionally, stopping it from running in the registry, and then starting MS Word, the Acrobat add-in does load and even though there is an error thown, it still creates the PDF! I have other Vista 32 notebooks running various Acrobat versions with no problems.
Another key thing I found out is that Acrobat started throwing the error after an HP Scanjet 8400 and its software were installed. I tried explicitly giving the user (already an administrator) full rights to the Acrobat, HP and Read IRIS directories. Did not help the problem. I have to think that there is some interaction there, but sure don't know what it is.

what i did to eliminate that error message, i don't think it eliminated th
e problem but now i can reboot and log in OK, was 2 things:
i went into my system registry and unchecked to start at startup and then disavled it.
i also had to go to each adobe icon, right click, go to properites, and than make all selections set to be administator.

No initial load of Customers, Material and delta load of Sales Orders.

Hi Experts,
I am facing a very troublesome issue. I am not able to setup the Middleware portion for initial and delta loads. I read a lot of documents and corrected a lot of things. finally, the connectivity is done with R/3 and CRM. Initial load of all objects is successful (as per Best PRactices guide). Customizing load is successful.
But after now I have these open issues for which I am unable to find any answers (am really exhausted!!):
- Customer_main load, it was succesful, but no BP's of R/3 are available.
- Material, it failed in SMW01, SMQ2, the errors are:
Mat. for Initial Download: Function table not supported
EAN xxxxxxxxxxxxxxxxxx does not correspond to the GTIN format and cannot be transferred
EAN yyyyyyyyyyyyyyyyyy does not correspond to the GTIN format and cannot be transferred
Plant xx is not assigned to a business partner
- Sales order, it shows green bdoc, but error segments says "No upload to R/3" and the order does not flow to R/3.
We had our system setup 3 years back for data transfer and Middleware. But few things changed and connectivity stopped. I did all that again now, but am not yet successful. Any inputs will be greatly appreciated.
Thanks,
-Pat

Hi Ashvin,
The error messages in SMW01 for MAterial initial load is :
     Mat. for Initial Download: Function table not supported
     EAN 123456789000562 does not correspond to the GTIN format and cannot be transferred
     EAN 900033056531434 does not correspond to the GTIN format and cannot be transferred
     Plant 21 is not assigned to a business partner
I have done the DNL_PLANT load successfully. Why then the plant error?
Some of the messages for BP:
Messages for business partner 1331:
No classification is assigned to business partner 1331
For another,
     Partner 00001872(469206A60E5F61C6E10000009F70045E): the following errors occurred
     City Atlanta does not exist in country US
     Time zone EST_NA does not exist
     You are not allowed to enter a tax jurisdiction code for country US
     Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Now, the time zone EST is assigned by default in R/3. Where do I change that? I do not want to change time zones as this may have other impacts. Maybe CRM I cna change this, not for sure in R/3. City check has been deactivated in R/3 and CRM, still the error.
Till these 2 are not solved, I cannot go into the Sales order loads.
Any ideas will be greatly appreciated.
Thanks,
-Pat

Initial Load of Business Partner not running

Dear SAP CRM gurus,
We have been able to perform initial download of Business Partners from ECC into our CRM system. We have done this many times. We do not know what is wrong, but since last week, we are unable to perform initial download of our Business Partners. When we run initial download using R3AS, there is no BDoc created, there is also no queues on inbound/outbound of both CRM and ECC system. There is also no error. R3AM1 showing initial download complete but only with 1 block. But there is no BDoc created!! All other replication objects are fine, except that BUPA_MAIN we are unable to perform initial download. Delta download is fine as well.
We have not changed anything on SMOEAC and it is all correct. Entries on CRMSUBTAB and CRMC_BUT_CALL_FU is also correct.
Please help!!

Hi,
When you are downloading CUSTOMER_MAIN through R3AS are u getting any warning or error??
or r u getting pop up with green light??
If u are getting any warning or error then go to tcode: smwp. Then go to runtime information
->Adapter Status Information>Initial Load Status
under that check running objects and check customer_main is there or not??
if found delete that entry and do initial load again.
Also check outbound queue of R/3 and inbound queue of CRM .
If then also its not working do request download using r3ar2, r3ar3 and r3ar4 and check whether it is working or not.
If helpful kindly reward me.
Thanks & Regards,
Anirban

Some web pages start to load then just "blank out"

When I go to some of the www.foxnews.com articles/web pages, the pages starts to load, then blinks, and starts to load again then goes blank. I went to the Actions window on the top most menu bar and saw that this is the last thing loaded. So I am guessing that the last thing shown as being loaded is causing the page to go blank. Any ideas as to why this is happening? I have updated both flash and shockwave players to the newest version. All Apple software is up to date.
-Apple //GS
PS: here is an example of what is loaded when the page goes blank.
http://www.foxnews.com/projects/pointroll/index.html?pid=606048U3092008042516071 4&redir=http://ad.doubleclick.net/click%3Bh=v8/36c1/3/0/*/d%3B202199158%3B0-0%3B 0%3B26605397%3B2321-160/600%3B26315705/26333559/1%3B%3B~okv=%3Bcomp=%3Bptype=sto ry%3Bpageid=370066%3Bcol=%3Bkw=ahmadinejad%20israel%20dying%3Bs1=world%3Bs2=null %3Bpos=frame1%3Burl=story0_2933_355599_00%3Bfnc=ad%3Bsz=300x250%3Btile=2%3B~aopt=0/ff/ff/ff%3B~fdr=202256 043%3B0-0%3B1%3B22018499%3B4307-300/250%3B26360965/26378819/1%3B%3B~okv=%3Bcomp= %3Bptype=story%3Bpageid=370066%3Bcol=%3Bkw=ahmadinejad%20israel%20dying%3Bs1=wor ld%3Bs2=null%3Bpos=frame1%3Burl=story_0_2933_35559900%3Bfnc=ad%3Bsz=300x250%3Btile=2%3B~aopt=2/0/ff/0%3B~sscs=%3F$CTURL$&flash=9&se rver=portalserve&bu=289126824
AND here is what is should be:
http://www.foxnews.com/story/0,2933,355599,00.html
I got this shorter version by stopping the "reload" before it started.

Okay, a guess...
The page only contains some JavaScript.
I don't think the page is meant for people to view - here's the code from the page...
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>FOXNews.com</title>
<script language="JavaScript">if(typeof(parent.prInst)=='undefined'){var prInst=1}else{prInst=parent.prInst+1} for(i=0;i<parent.frames.length;i+){if(parent.frames.title=='prif'){prInst+}}this.title='prif';var prs="http://ads.PointRoll.com/PRServe/?pos=s&num="prInst+"&"location.search.substring(1)"&r="+Math.random();document.write('<scr''ipt language="JavaScript" src="'prs+'"></scr''ipt>');</script>
</head>
<body>
</body>
</html>
Tom

Message no. R1286 when starting initial load again

Similar Messages

Maybe you are looking for