Message no. RD155 -- No source could be found to answer the search query
Hi All,
while checking my new COPA datasource in RSA3, I get the Error message No source could be found to answer the search query Message no RD155.
I have maintained the summarization levels which is in a status of "Active Without Data". Also note, the tables for CE1XXXX, CE2XXXX & CE3XXXX do not contain data. However, CE4XXXX table does contain data.
Kindly help.... its very very important and i need to finish this datasource ASAP
Hi
I am unable to implement both the notes as I am already on a higher version of PI_BASIS.
I have replicated my datasource into the BW system..
While doing the INIT load without DATA TRANSFER, i do not get any error message, however, while doing a Delta it does not bring in any records but does not fail as well
However, if i delete the initialization selections and load the data using the setting INITIALIZATION WITH DATA TRANSFER or Full UPDATE, the data load fails with the ERROR MESSAGE "Errors occurred in data selection."
Please help... This issue is very very important and i need to deliver it ASAP
Edited by: Sneha Santhanakrishnan on Jun 24, 2010 9:29 AM
Similar Messages
-
COPA extraction: RD155 No source could be found to answer the search query
Hi Everyone,
I'm trying to schedule an init. load for the new fiscal year from an Account-based 1_CO_PA** extractor. I've entered restrictions for Controlling Area (single entry) and Fiscal Period (PERIO) 001.2011 - 001.2025.
When I try to schedule the init. load or even test the extraction in RSA3, I get the error message 'No source could be found to answer the search query'. I've checked my summarization levels and and they have the value '*' for all characteristics.
If someone can provide an explanation for the error message, it would be most helpful.
Thanks,
RamHi Ram,
This error is almost always caused by incomplete or incorrect customizing:
In addition, the summarization level must have status 'ACTIVE' (this applies also to the search function in the maintenance transaction for CO-PA data sources,KEB0).
Please also review the SAP note 392635 which is release independent and has further information on the customizing and CO-PA extraction:
392635 - Information: Sources with BW extraction for account-based
CO-PA
So please check your customizing and the note 392635 carefully in particular please pay attention to the following:
There has to be one (single) summarization level that contains all characteristics (except for the controlling area) with '*' in the
characteristics view in transaction KEDV and has status 'active'.
After checking the above you need to replicate the datasource in the connected BW system and reactivate the transfer rules.
Best Regards,
Des -
I just bought a new Scanjet G4050 and when I try to install the software I get an error message and the software will not install. Error message is:"Error 1706.No valid source could be found for product ScannerCopy. The Windows Installer cannot continue." During the install, I was prompted to enter a CD or other location to load ScannerCopy.
I had an older version of this same Scanjet G4050 working on my PC about a year ago. My PC is running Vista 64.
Any ideas how I can get the software to successfully load? Any ideas of where I can get this "ScannerCopy" that the software is asking for?Remove your current installed Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and run the full installer from http://get.adobe.com/reader/enterprise/ -
Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."
Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/
-
I am running version 3.6.22 and would like to update. However when I tried to update from the Mozilla web site I got the message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator"
What do I do now?? Paul Stager [email protected]I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?
-
Error 1706 No valid source could be found for adobe reader x
Error 1706 No valid source could be found for productAdobe reader X (10.1.4) Install cannot continue.
On programs that need adobe reader, the page will not come up.
I tried to restoring my system to a point before when adobe was working, and tried to reinstall adobe reader.
the download stops at 80% and reports: cannot find file AdbeRdr1010_en_us(1).msiRemove your current installed Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and run the full installer from http://get.adobe.com/reader/enterprise/ -
error 13.11 Source file not found verify that the file exsist
Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Error: The report source could not be retrieved from the state object.
I have been trying to create a report in a JSF page. The relevant parts are below:
Inside the JSP page, this is the code:
<jsp:useBean id="MyBean" class="com.nm.facade.rto.POJOViewerBean" scope="session" />
<jsp:setProperty name="MyBean" property="reportLocation" value="Report1.rpt" />
<v:reportPageViewer reportSource="#{MyBean.reportSource}"
displayToolbarPrintButton="true"
printMode="ActiveX"
zoomPercentage="100"
displayToolbarExportButton="true"
displayToolbarRefreshButton="true"
viewerName="My Viewer"
></v:reportPageViewer>
In the backing bean, this is the relevant code:
public Object getReportSource() throws ReportSDKException
if (propertiesChanged || reportSource == null)
propertiesChanged = false;
if (reportLocation == null)
throw new RuntimeException("The reportLocation property must be set before a report source is retrieved");
ReportClientDocument rcd = new ReportClientDocument();
rcd.setReportAppServer(ReportClientDocument.inprocConnectionString);
rcd.open(reportLocation, 0);
DatabaseController dbc = rcd.getDatabaseController();
//Create the POJO collection and populate it with data
ReportData[] data =
new ReportData("B.B.", "King", 6, new Date(25, 9, 16)),
new ReportData("Muddy", "Waters", 7, new Date(15, 4, 4)),
new ReportData("John Lee", "Hooker", 8, new Date(16, 8, 16)),
new ReportData("Otis", "Rush", 9, new Date(34, 4, 29)),
new ReportData("Buddy", "Guy", 10, new Date(36, 7, 30))
//Create the result set from the collection of POJOs
POJOResultSetFactory factory = new POJOResultSetFactory(ReportData.class);
factory.setVerbose(true);
POJOResultSet results = factory.createResultSet(data);
ResultSetMetaData metaData = results.getMetaData();
//Set the resultset as the report datasource
//Get the table name from the 'Set Datasource Location' dialog in the Crystal Reports designer
String reportTable = "getReportDataDataSource";
dbc.setDataSource(results, reportTable, reportTable);
IReportSource reportSource = rcd.getReportSource();
if (reportSource == null)
throw new RuntimeException("Unable to get a report source.");
return reportSource;
In the CRConfig.xml, this is what is there:
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../reports</reportlocation>
<timeout>0</timeout>
<ExternalFunctionLibraryClassNames>
<classname></classname>
</ExternalFunctionLibraryClassNames>
</CrystalReportEngine-configuration>
The report template 'Report1.rpt' is packaged under WEB-INF/reports in the war file.
When I try to generate the report by accessing the JSF page, I am getting an error: "The report source could not be retrieved from the state object. "
I am not sure what is wrong. Can someone help me in resolving this issue?
Edited by: renshai on Jul 9, 2009 3:21 AMMy formatting gets lost and the message looks unintelligible. After some experimentation, I found that if the message exceeds some length, the formatting is removed. Since I couldn't find any way to delete this post, I made another post with the same subject. Please ignore this post and help me to find a solution for the problem posted in the other thread with the same subject. Thanks in advance.
-
ipod sync problems
ipod 2.2.1 touch OS10.6.8 itunes 10.6.1
The photos sync but the calendars and contents will not. I keep getting this error message...
«iTunes could not sync information to the iPod «name of iPod» because a sync session could not be started.»Greetings,
See this post: https://discussions.apple.com/message/12799057#12799057
Cheers. -
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
If the problem persist, contact apple support at apple.com/support
I been trying for a few times now and I keep getting the same message. How can i fix it? now my phone doesnt work.These are the steps mentioned in the article iPhone: Troubleshooting activation issues
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance. -
hi just got a gift of an ipod touch model MD720LLA with operating system iOS7.1.2
I get the following error message when trying to sync "could not be synced because the sync session failed to finish"
what could be the problem
have also uninstalled and re installed itunes
thanks
<Re-Titled By Host>Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion -
When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!
Taken at face value, you're having trouble with a QuickTime program file there.
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "QuickTime" and then click "Repair".
Does the repair go through okay? If so, are you able to launch iTunes and/or Safari now? -
Have OS 10.7.5. Computer off three days and now message comes that Time Machine could not complete backup because the "/volumes/PH's timecapsulPro.sparsebundle" is already in use. Whats that about?
Two Solutions for "sparse bundle already in use" Error
Simple solution (from Bob Timmons):
1. Make sure that no other Macs are backing up the Time Capsule at the time
2. Pull the power cord from the back of the Time Capsule
3. Count to ten
4. Plug the power cord back into the back of the Time Capsule
If Simple doesn't work:
The Backup disk image ... sparsebundle ... is already in use. -
No valid source of supply could be found - while running the cost estimate
Hi all,
We are running the material cost estimate for a subcontracting material. The costing is giving an error saying "No valid source of supply could be found".
We have checked
1. Purchase info record
2. Source list
3. Valid dates are maintained for the condition records for the info record.
Still we are getting the error.
Can somebody help on this ?
Thanks in advance
Regards
Karpagam SrinivasanDear Karpagam,
Please check these points,
Are you sure you have created a Purchase Info Record in ME11 for a Sub-contratcing process?
Sometimes you would have crated a standard Purchase Info Record.
Maintain procurement type as F and special procurement value 30 in the MRP2 view of the material
master for that material.
As you have mentioned PIR,Source list already exists,please check this and come back.
Regards
Mangalraj.S
Maybe you are looking for
-
Merging two records in a single record for the same matnr,werks and bwart.
Hi I have a requirement to merge two records into one single record using the quantity field from MSEG table. I am selecting two records from the table MSEG. Now for these two records i have to add the quantity values into one variable. Then there sh
-
ITunes bug? Rating stars won't click-drag left-right anymore
The latest iTunes patch (v10.1.0.54 running on Windows 7) seems to have an annoying bug: When I'm rating a song, it immediately takes my initial click, regardless of whether I hold down the mouse button -- whereas I used to be able to click in the ar
-
Icons flicker and external drives don't work
anyone having this issue? It just started today. the icons on the Late 2009 iMac desktop will flicker and when i try to copy a folder to one of my extarnal Seagate HD's the icons flash and the transfer stops. thanks for any help. I looked on some boa
-
FRM-41219 - Cannot able to call reports from form generated in Designer
Hi I'm trying to call a report from form whit a button generated in Designer 10.1.2.0.2 But I'm getting error : FRM-41219 Invalid report id I'm tying with a menu but I'm getting the same error. Please help me
-
After Effects crashes after I drag a flv video from Project to Composition pannel
I'm trying to stitch several FLV files together. I import 12 files and then try to move them to the composition. At that point--whether I'm moving one file or all 120--AE crashes. All of the files are the same dimension and frame rate. All I want to