Message no. RM109 The quantity at RP  is less than the quantity at next RP

Hello everyone,
I am getting an error in regards to a reporting point.  I tried going into MF4R to reset the reporting points and when I do I get the following message:
The quantity at RP 0220 is less than the quantity at the next RP
Message no. RM109
Diagnosis
The reporting point structure is inconsistent as at reporting point 0220, the backflush quantity is less than at the subsequent reporting point. In a consistent backflush, the quantity at a subsequent reporting point (work in process) always less than or equal to the quantity at the previous reporting point.
Procedure
Check the reporting point stocks using transaction MF26. Post any missing quantities at previous reporting points.
I have went into MF26 and  "Yes" reporting point 0220 is less than the following reporting point.  My question is... how do I fix this?  Any help will be greatly appreciated.

Good morning Raj,
Here is what MF26 is showing:
614830             0033 0001 W3300
0010                84  PC
0020                38  PC
0030                38  PC
0040                38  PC
0050                38  PC
0060                84  PC
0070                84  PC
0080                84  PC
0090                84  PC
0100                38  PC
0110                84  PC
0130                38  PC
0140                38  PC
0150                38  PC
0155                84  PC
0160                38  PC
0165                84  PC
0170                84  PC
0180                38  PC
0185                84  PC
0190                84  PC
0200                38  PC
0210                38  PC
0220                38  PC
0225                84  PC
0230                84  PC
0240                84  PC
0245                84  PC
0246                84  PC
0250                84  PC
0260                84  PC
0270                84  PC
0280                84  PC
0290                84  PC
As you can see RP 0220 shows only 38 pcs  RP 0225 and up shows 84 pcs.  Using MFBF I backflushed 46 pcs to RP 0220 to make it equal to the 84 pcs.  But, when I went back into  MF26 RP 0220 still shows 38 pcs.
Thank you for your help!
Rhonda

Similar Messages

  • Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. How can I increase the storage space?

    Question
    Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. I delete emails from the Inbox and the Sent and Trash boxes to overcome this. How can I increase the storage space to stop this happening?

    Hi terrybohle1938,
    Firefox is a web browser. It provides access to online content. Things like your email are handled by the content provider. Who is your email provider? You'll have better luck consulting their documentation.
    That being said, deleting only email is a great way to free up space. Another option would be to purchase a "Premium" account if your email provider offers this service. Many times more storage space is offered as part of paid subscription.
    Hopefully this helps!

  • Why does my new macbook pro display the message "startup disk is full" when i have less than 50 gb used on a 500 gb hard drive?

    This is really a problem since i need to save stuff for school work and i can't currently do that.

    It happens anytime I log in, try to save something, or open a new application that may require me to save something. Any advice would be helpful

  • Automatically highlight the next message and remove the "unread" status

    In my inbox on Ipad, when I  swipe and delete a  message or highlight the message and hit the delete icon in the upper right corner, it will automatically highlight the next message and remove the "unread" bullet next to the message. This is version 7.1. Is there a way tnot to have your messages marked as unread when you haven't read them yet?

    You can hit the small flag icon and mark it as unread yourself.

  • Help with flashing message envelope in the home sc...

    Hi all
    I was hoping if someone could help with the flashing message envelope in the home screen (next the the key lock, blue tooth, car kit symbols., which will no go away...Just keeps flashing
    I have checked that I have no message in any of my inboxes, out boxes..ect
    I have set-up email, sms etc. and cleares all boxes
    I have tried a reinstall to factory original setup
    Any ideas
    Solved!
    Go to Solution.

    What do you mean by "repeats every few hours"? Does the flashing message icon pop up all of a sudden, without receiving any messages? Sometimes it happens that messages that are received as many parts will be read by you before all of them have been correctly received. So, as and when a new chunk arrives, you will see this icon even though you had 'read' the message.
    If you try the method described in the above post, you will not have any messages in your SIM, and I assume you have no unread messages in your phone either.
    I would suggest you to change the Memory in use to Memory card (Messaging -> Options -> Settings -> Other -> Memory in use) temporarily, see if you have any unread messages there, clear everything, and then revert it back to Phone Memory.
    If it doesn't work, try a factory reset (*#7780#). This will reset your messaging settings also.
    Cheers,
    DeepestBlue
    5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
    If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

  • Message no 06067 "Scheduled quantity & &" greater than target quantity

    Hi,
              I change the status of the message no 06067"Scheduled quantity & & greater than target quantity & &" from W to E. Than In Se38, the schedule quantity cannot be maintained greater than target quantity.
    But in MRP Run, the message number does not work.
    How to restrict higher qty then target qty created through MRP.
    Thanks in Advance.
    Ashish Panchal

    Hi Ashish,
    The Note 83343 should answer your question.
    83343 MD01: No check of target qty in sched. agreemnt
    As described:
    "The planning run should run automatically and without interruption by some events.
    The system makes a decision either in favor of the quota arrangement or in favor
    of the source list. The system reads the scheduling agreement once in the update process.
    To have a check on the target quantity would require another read of the document which
    was determined to affect the system performance."
    A maximum quantity can be considered by means of the quota arrangement. A modification exists which will allow for a check of the maximum quantity in the quota arrangement. The note contains more details on this.
    Regards,
    Purnima.

  • Message config for PO quantity

    Hello,
    I want to configure the system, so it doesn't allow me to create a Purchase Order for the quantity more then in Purchase Requisition (if i am creating a PO with ref. to PR)
    I configured the message (06 254 Order quantity greater than requisition quantity) as an error message, but it doesn't work at the time of PO creation. I am wondering if it is the correct message for the requirement.
    Many thanks for the help.
    Cheers,
    Manish Jindal

    Configure 06-076 in SPRO-MM-Pruchasing-Environment data- Message attributes.. and make it warning or error...
    This will work..
    Reward if helpful..
    Regards,
    Bhushan

  • Message-4F181 :Credit Quantity less than Excise invoice Qty

    HI,
    I have done migo with part 1 entery,WHLE DOING J1IEX .I AM GETTING A WARNNING MESSAGE 4F181 :Credit Quantity less than Excise invoice Qty
    Please suggest
    Regards
    SAM

    Hii,
    Did u reduce the Quantity of the Excise Invoice??
    Regards,
    Kumar

  • Excise invoice quantity cannot be less than the quantity received

    Hi,
    I have done MIGO with part 1 entry but while doing J1IEX, I am getting an error message 4F109 : Excise invoice quantity cannot be less than the quantity received.
    Please note that we have done MIGO with 5000 qty. and doing J1IEX with short 3000 qty.
    Regards.

    Hi,
    For this case of "Part I" selected during GR, you need to create Excise invoice thro J1IEX ->  Capture Excise Invoice -> Good receipt (use the material document number), which will complete the part II posting. Then you can proceed with MIRO.
    With regards,
    Jeeva.

  • How order got transmitted even if quantity is less than the minimum

    Hi All,
    We have an issue where an order has been transmitted for 23 cases where minimum is 25. This order came through even if this order is for that part of the region that should not be able to tranmit orders if under min..
    Being a technical guy, I am not able to understand the issue itself.
    Doubts :
    1. How an order is supposed to be transmitted ?
    2. What is this minimum below which an order should not be transmitted? Where this minimum value is defined ? Is it specific to customer or specific to area or specific to plant?
    In which table or through T-Code I can check this minimum ....
    Can you please guide how to explore the above....
    Thanks in advance.
    Regards,
    Sanjeet

    Hi Sanjeet
    You can maintain "Minimum order quantity" in the Material master data.
    Go to change mode of material master (MM02), enter your material number, click enter, select the "Sale org 1" tab and continue.
    Now, in the "Sales org 1" tab , scrolled down and you will find a field "Minimum order quantity" as you required, save it.
    Suppose, you have entered ,minimum order quantity as 10 pcs.
    If you create an order for that item and if the quantity is below 10 pieces then system will give you "warning message". This is normal standard setting.
    If you want that system should give "Error message" instead of "Warning message" , then go to transaction code "OVAH".
    For combination "V4" and "082", change the sytem message to "E" (normally you will find here W).
    NOW, SYSTEM WILL GIVE YOU ERROR MESSAGE IF YOU ENTER , in the Sale order, order quantity which is  less than the minimum order quantity as specified in the material master data.

  • Recently whenever i plug my ipod nano to my pc the pc shuts down to a blue screen then a black screen  then windows error message i have the latest version of itunes and software i just got this dec 2012

    as of today when i plug my 7th generation ipod that i just got for christmas 2012 my pc shuts down to a blue screen with alot of writing then to black screen with alot of writing then to an all black screen then and windows error message my computer is ingood condition no malicious malware and has been clean i need help
    thank ycj

    let me get back with the answer with what the messages say on the blue screen and the black screen if i can read them fast enough before it shuts down i have windows 7 professional

  • My 120GB IPod classic is not recognized by my Windows 7 PC.  When I plug the ipod into my computer I receive a message saying that the USD device is not recognized.

    My 120GB IPod classic is not recognized by my Windows 7 PC.  When I plug the ipod into my computer I receive a message saying that the USD device is not recognized.  The Device Manager lists it as an Unknown Device.  I've tried uninstalling iTunes and reinstalling it, but it had no affect.  The odd thing is that our other iPod (160 GB Classic) is recognized on the same computer using the same USB cable.  When I plug the ipod in question into another PC, the PC seems to recognize the iPod and lists it in Windows Explorer (iTunes is not installed on this machine).  There seems to be something out of wack with this PC/iPod combo.  Any thoughts on what I can do to try to resolve this issue?  I tried all of the steps listed here, but they didn't help me.  http://support.apple.com/kb/TS1538
    Any help would be greatly appreciated.

    Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • When I am writing an email, I get an alert message that says "The message could not be copied or moved to the drafts folder. Writing to the folder failed. To ga

    When I am writing an email, I get an alert message that says “The message could not be copied or moved to the drafts folder. Writing to the folder failed. To gain disc space, choose Empty Deleted and choose Compact Folders and try again.”
    If I do that, I get a message saying “There was an error copying to the Sent folder,, retry?”
    If I retry it sends the uncompleted email. All I can do is keep deleting the message and carry on. Then the whole business might repeat itself.
    Help!
    Frank

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • Query to populate an alert message to avoid the duplication of Reference no

    Hi Experts,
    SUB:Query to populate an alert message to avoid the duplication of BP reference no.
    In A/R invoice, BP reference (numAtcard) is used to enter sales Order no as the reference number. As human error, double A/R invoice is created to that particular Sales Order no.
    So,I want a formatted search query in that BP reference field, so that when i type the sales order number and give tab, it should populate the alert message if it already exists.
    Moreover i do not want to block it through store procedure method, only warning is required to my scenario.
    Kindly, help me on this ground.
    Regards,
    Dwarak

    Hi there, i think this could work, maybe you'll only need to configure the Formated search to work with the document total, each time it changes
    declare @numatcard varchar(15)
    declare @count int
    set @numatcard=(select $[oinv.numatcard])
    set @count= (select count(numatcard) from oinv where numatcard=@numatcard)
    if @count>1
    select 'There is a duplicated reference'
    select @numatcard
    hope it works

  • Cannot send email via AOL on iPad2 - "A copy has been placed in your Outbox. Sending the message content to the server failed."

    My CEO has an ipad2 and I set it up w/ AOL.  She cannot send any email via her AOL account from her iPad.  She gets a message that says "A copy has been placed in your Outbox. Sending the message content to the server failed."   We've tried it on wifi and on 3G (Verizon version).  I've removed the account and added it, I've tried setting it up as an IMAP account vs. using Apples standard AOL mail setting and nothing seems to work.  The SMTP settings are smtp.aol.com, port 587.  I've tried adding an alternate server/smtp, but I haven't been able to find anything that works.  Any advice or other people having this issue?  It works fine sending an email from her aol web mail.  And unfortunately, having her sign up for a gmail account is not an option.  Thanks

    Interesting.  Firstly I have been on AOL since the early 90s with no current intention to switch as my primary personal email account.
    I have two email accounts on my iphone - AOL and my email from my business website.  I deleted both and then recreated first the business account and then the AOL account.  Same error.  Then I wasn't sure what you suggested but I turned off the AOL SMTP server and selected the business email SMTP server by turning it on with the same result.  I still get the error "A Copy has been placed in your Outbox.  Sending the mssage content to the server failed."
    Perhaps this problem will get fixed by IOS 6.   AOL will not talk to me unless I pay and Apple says its not their problem.  So for the time being I use the AOL web interface in the iPhone's Safari to send emails from the phone.

Maybe you are looking for