Message no. RSO296 - unable to activate update rules

Object CRD4VK18Q4S6OQ2Y6IYRRL7WV (Update Rules) could not be collected for object ()
Message no. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object of type have also been collected. Object CRD4VK18Q4S6OQ2Y6IYRRL7WV of type Update Rules was among these objects. This object
CRD4VK18Q4S6OQ2Y6IYRRL7WV of type Update Rules, is not, however, available in the Metadata Repository.
System response
Object CRD4VK18Q4S6OQ2Y6IYRRL7WV of type Update Rules is ignored in further collections. The links for object of type are incomplete. This may result in not being able to activate this object.
Procedure
If this error occurs while you are installing Business Content, a delivery error may have occurred. Inform SAP. In all other cases, check, for example, that the object has not been deleted by another user during the collection.
Need help to activate update rules

The "new key Figures" that I have included in ODS are added to the "old Key Figures" that are there in ODS already. The "old Key Figures for which there are source fields. But, the "new key Figures" are dependant on the the 2 source fields.
So, do I still need to declare these "new key figures" in the ODS?

Similar Messages

Im Trying to re-Activate my ipod touch cause i have just restored it and on my ipod screen it has connect to itunes and on itunes i get a message "We are unable to activate at the moment please try again later" somthing like that please help :(((

Im Trying to re-Activate my ipod touch cause i have just restored it and on my ipod screen it has connect to itunes and on itunes i get a message "We are unable to activate at the moment please try again later" somthing like that please help :(((
HELP!!!!Zoom in to read please

but can not be unlocked
If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T. It CAN'T be used with Tigo or Movistar.
Your post makes very little sense. Maybe you can get some help with English.

Activate Update Rules from Business Content

Hello,
I am trying to install 0QM_C10 from business content. Every thing works fine except there are no update rules (there are 3 info sources for this cube). I am new to this and it doesn't make sense for me to manually create (ofcourse the system does the proposal) update rules. Since that is lot of work. I was expecting some transaction / tool where I can activate the update rules from the Business Content (since I can see the update rules in the business content under "Display Description". Is there any tool like that?
Or, am I doing some thing wrong so the update rules are not automatically installed from the business content along with Cube and info sources?
Note: I did separate installation for cubes as well as info sources from business content using Grouping by "Only necessary objects" option.
Thanks in advance.
Bala
Message was edited by: Bala Lingamaneni
Message was edited by: Bala Lingamaneni

Bala,
please don't uncheck the checkbox that you find when you open a new thread (let it as default!)...this is the only way to be able to assign points to your helper !
Write a request (as a normal post) into SDN Suggestion forum in which you ask to Marc Bernard or Mark Finnern to convert this post as question !
Bye,
Roberto

Unable to find Update rules in BI content

Hi All,
We are unable to find the update rules for the datasource
2LIS_03_BX
2LIS_03_BM
2LIS_03_UF
in the Business Content for the cube 0IC_C03
But we can find the update rules for the datasource 2LIS_40_S278 for the cube 0IC_C03
The BI content was of Release 703 (level 0011) in our system.
What might be the reason for this ?

Hi Surya,
How are you collecting the BI content.
In BI content select the datasource and collect data flow afterwards. You will get update rule in it.
Regards,
Viren

Unable to install update rules of 0SD_C03 from BI Content

Hi
I am having problems in installing the update rule of 2LIS_11_VAITM for the IC 0SD_C03 in BI 7.0. I tried installing it from the BI content but only this missing update rule is not being installed. There were problems while creating the transformations hence i deleted the rule and tried to get it back from BI content.
Even after installing the entire cube (with grouping before and after) i am unable to get the update rule for this cube.
To test it i deleted another update rule of this same cube and now i dont have both the rules.
How do i get the rules for the cube back????
thanx
Sujai

hi guys,
i am also faced the same issue but some what different way,
when i am going to assign a data source to info source in source system
it automatically take it to the particular transfer rules and transfer structure
in stallion screen in BI content. after selecting the install button, control will
take it to other screen, there i select transfer with out dialogs,
after some time the control will got to sap r/3 system log on screen.
finally it won't install the object's, can anyone resolve this issue
regards
harikrishna.N

Unable to activate Transfer Rule

Hello Experts,
I am not able to activate Transfer Rule in my System ( BW 3.0).
I have written one routine and then when I am trying to activate I am getting below error messageu201D
Object 0NOTIFICATN_ATTR object version not found in table.
My Data Source name is 0NOTIFICATN_ATTR.
I have also tried to activate by using RS_TRANSTRU_ACTIVATE_ALL but still no luck.
I also checked table TADIR and I can see entry over there.
Regards,
Pankaj Naik.

Hi Pankaj,
Try to activate the transfer rules by executing the SE38 report - RS_TRANSTRU_ACTIVATE_ALL.
Also check the note - 884385 , For 'RSAR' errors while activating update and transfer rules.
Regards,
Lokesh

Unable to delete update rule

Hello All,
When iam deleting an update rule it is not getting deleted and iam getting message saying underlying infosource does not exists .The underlying infosource is deleted long before any way how come deleting update rule depends on infosource. Please give me solution to delete update rule.

Try going into RSRV and choose All Elementary Tests => Database => Database Information about InfoProvider Tables and Databank Paramerters of *-Schema Tables for Infocube.
Those two options may help to correct the inconsistent state the database is currently in.
Another option .. copy your data target as a backup. Delete the data target, then copy it back.
Brian

Program to activate update rule for master data (info objects)..very urgent

Hi all,
I have an info provider(A0CUSTOMN). For this the update rules are not active.In production system i am not able activate.Please let me know if there is any program to activate the update rule for masterdata(info object).
Thanks=points
Manjula

Hi Manjula,
Leave the id and infocube field blank. Just provide the infosource name.
BTW is this a direct update master data object? In that case all this is not relevant.
Check if it appears as an Infoprovider.
I did not ask enough questions to start with.
BR/
Mathew.

Unable to map Update Rule with u201CMaster data attribu201D option

Hi,
Does anybody know the reason why sometimes, in update rules to an ODS, I cannot map an InfoObject with the option u201CMaster data attribu201D?
I have the characteristic in the ODS, and for another update rule, to the same ODS, I am able to map this field correctly, but for a specific rule, the u201CMaster data attribu201D field appears in blank when I press F4.
Strange this behaviouru2026
Can anybody help me with this issue?
Thanks,
Best Regards,
Joana

Hi Shanthi,
I didn't insert the InfoObject as an InfoProvider.
The problem is that I have two update rules for the same ODS object. For one I can map the characteristic correctly, and for the other, when I press F4 in the "Master Data Attrib", no characteristics appear.
Thanks,
Joana

Unable to activate the Update rules

Hi Experts,
I have modified an object from display attribute to navigation attribute.
After this i tried to activate updates rules (Y_DAY & 8Y_DAY)for that cube.
I sucessfully activated Y_DAY but when I am trying to open the other update rule 8Y_DAY, the error message is 0EQUIPMENT is not available in Communication structure and could not activate.
Please suggest the solution for this error.
thanks in advance.
Sunil.

Hi,
the 8Y_DAY is a datamart ISource created by the system when either
- you are using an ODS
- generated an export DSource on a cube or IObj.
If you have modified the object Y_DAY its corresponding ISource shall be adjusted accodingly.
hope this helps...
Olivier.

Update rules -Empty or invalid formula error message (Message no. RSAR140)

Greetings to All,
I am trying to activate update rules from a DSO into a cube. I am getting the following error message:
Empty or invalid formula 43D46N8MX3MNP06MF69ZQ8L50
Message no. RSAR140
The problem is that I don't know how to lookup a formula by the technical name. I know you can right click to show technical names of the InfoObjects, but I don't know how to show the technical names of the <i>formulas</i>. Does anyone know some way to figure out which formula is the one causing the error when all I know is the technical name?
Thanks,
Sarah-Jane

Hi!
Thanks so much. That makes perfect sense, but when I look at that table using transaction SE16, and I click on the "Number of Entries" button, I get a message saying there are zero rows in the table. Could this be possible? I know this sounds really weird...
Just in general, how do I found out the names of tables like RSUPDFORM? Is there a data dictionary that I can query?
Thank You,
Sarah-Jane

HT4623 I recently downloaded ios 6.1.3 in my iphone s3 but could not install. The message on the phone is " unable to install update. An error occurred installing ios 6.1.3. I have tried several time but the same message keep appearing. what do i do.

I recently downloaded ios 6.1.3 in my iphone 3, but unable to install the download. This message keeps showing "unable to install update, an error occurred installing the ios 6.1.3 I have tried several times but the same message keeps coming. What is the solution?

There is no such thing as an iPhone 's3'. There is a 3G which can only be updated to iOS 4.2.1 and a 3GS which can be updated to iOS 6.1.3.
Which model iPhone is this?
Identifying iPhone models

Error when activating update rules for R/3 training and event management

hi all,
when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
Message no. RSAU461".
please guide me how to solve this issue.
thanks & regards
Vamshi D Krishna

Hi Vamsi,
Have you followed the following document to implement HR ?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23

ABAP needed: New Value/Old Value in Update Rules

Hi all
I'm updating some attributes in IObj by ABAP routine. Is it possible to get not only new value of attribute but the old one to compare them?
Is it possible to get others attribute old and new values?
I'll illustrate it with example.
Say, IObj has 3 attributes:
0ACC_GRP
0DT_FROM
0DT_TO
if NEW value of 0ACC_GRP <> OLD value of 0ACC_GRP then
new 0DT_FROM = SYSDAT
new 0DT_TO = old 0DT_FROM
else
new 0DT_FROM = old 0DT_FROM
new 0DT_TO = old 0DT_TO

My case quite simple I guess.
I got 0CUSTOMER infoobject and appended it with several time-dep attributes. After it my Update rules were deactvated. I got error message with prompt to fill out FROM_DATE, TO_DATE as key fields in every attribute (time-dependable and none time-dependable) while was trying re-activate Update Rules.
So, what's wrong with that? What I supposed to do with all those to/from date key fields in my Update Rules??
Edited by: Gediminas Berzanskis on Jul 2, 2008 3:44 PM

Activating Update Rules in BW Production Systems? How

Hi all...
How do we activate Update rules in Production systems?
As we dont have the activate button high lighted in update rules.
Urgent.
Thansk in Advance.

Hi,
Since the production system is not chnagable you will will not get the activate button. you can only see the updaterules in display mode.
You should activate the update rule in the Dev environment and capture the same in a transportable request and transport the same to Production environment.
If it is very urgent and the transport from Dev would take time. You can as the basis to open the productyion client from tcode scc4, once the procuction client is open you will be able to activate the update rules in production system itself.
assign points if useful
regards
Venkata Devaraj

Message no. RSO296 - unable to activate update rules

Similar Messages

Maybe you are looking for