Message no. /SAPDMC/LSMW804

Hi SAP gurus,
in LSMW T code i am getting the below error in 9th step i.e. read data. please help me out....
Message no. /SAPDMC/LSMW804
Thanks,
BKT

Hi,
Please refer the note 753511.
You should specify the physical name as the logical name is given(this has to be specified including the physical path!)
LSMW itself works with the physical files only - the logical one is used for the interface program.
The CSN-Note 753511 has to be considered. FILE has to be specified with the whole physical name in LSMW as described in the note: the LSMW file name has to be fully specified, this is including the path (but max. 45 chars). Please include the path in field "File" of the popup and to shorten the file name to keep it all together below 45 characters.
You can use new names for logical path and file. LSMW creates one in FILE automatically and also sets the assignments between logical and physical correctly without errors.
regards
Waman

Similar Messages

Message Class assignment to application area

Hi all,
Now i have created a Z* message class and would like to assign this class to application area asset accounting for GGB0 purpose.
Means, when i am creating validation rules at AA, and while putting error message number, system showing message class /SAPDMC/LSMW_GLO_040 and i have to choose from this message class only. Here i cannot choose message from another message class. Since i would like to use a message from my own Z* message class.
Please suggest.
Regards,
Srinu

Hi,
While being in GGB0, stand on the node of the validation group (e.g. Asset Accounting - Master data), go to Menu - Environment - Change Message class.
Regards,
Eli

LSMW read data problem

hi,i m upoladed the data lsmw through. i already Assign the files in lsmw,but when i import the data through Execut- import data for z92.fi, vendor. and when i execut the import data The " Errors, Unable to write to file 'd:\Z92_FI_VENDORS.lsmw.read'
Message no. /SAPDMC/LSMW804
so, if anybody knows then reply very soon.
because its very urgent
Reagrds,
pritesh
9898986357

Hi,
I have posted one invoice for vendor which has reconcialtion A/c 28000.
Now i have changed the Reco. A/c in vendor master from 28000 to 28100.
now the problem is that i want to transfer the posted entries ,which was in A/c 28000 (Reco. A/c), to 28100 (Reco. A/c)
So, how can i transfer the same and if any t.code to run then whic is the t.code for the same.
Its very urgent
Regards,
Pritesh

LSMW data Reading Error

HI,
In the LSMW process i am getting the below error while doing 9th step Reading data.
Unable to write to file 'E:\Z1XK01_ZXK01_ZXK01.lsmw.read'
Message no. /SAPDMC/LSMW804
Rgds
Mani

'E:\Z1XK01_ZXK01_ZXK01.lsmw.read'
what is E: ?
only a directory on your application server is allowed here (it must not be a directory from presentation server, which is your local PC(
go back into step 7 and correct the directory and file name for the read data

How to Get file from Server (via AL11)

Hi Team
I have a requirements like getting the file from the server if Application server is check.
Once i have press F4 button on the file parameter, shown dump .
i am using FM /SAPDMC/LSM_F4_SERVER_FILE under AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_apath.when i am pressing F4 button to findout the file directory it shown dump like
MESSAGE E019(/SAPDMC/LSMW).
My system is ECC 6.0 Develoment .
Please have a look and let me other alternatives to get the file from application server.
In Advanced Thank you.
Thanks & regards.
Puneet.

Hi Gautam,
i have tried as per given FM but problem is that while reading the file it gives sy-subrc 4. file is already situated correct directory then gives error.
So please give me other function module which is similar functionality as
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
        EXPORTING
          directory        = c_space
        IMPORTING
          serverfile       = p_w_file
        EXCEPTIONS
          canceled_by_user = 1
          OTHERS           = 2.
Thanks.
Puneet.

In which table are LSMW Project details stored

Hi Gurus,
Can you pls tell me in which table can I find the Project, Sub Project, Object details, User Name. We have developed LSMW's during a global implementation for 60 countries and need to now send a report with all the above details.
Pls help!!!
Regards
Naveen

All the tables related to LSMW:
/SAPDMC/LISCREEN General (Screen Fields)
/SAPDMC/LSCDOCU Documentation Elements
/SAPDMC/LSCDOCUT Documentation Elements: Name
/SAPDMC/LSCPROGS Parameter Names of the BI/DI Program
/SAPDMC/LSCRULE Rule categories
/SAPDMC/LSCRULET Rule categories
/SAPDMC/LSCSTEPS Work Steps
/SAPDMC/LSCSTEPT Work Step: Name
/SAPDMC/LSCVERSN LSMW Version Number
/SAPDMC/LSGBDC BI Name: "Code"
/SAPDMC/LSGBDCA BI Name: Attributes
/SAPDMC/LSGBDCS BI Name: Structures (Name=PrefixRecordingHlevel)
/SAPDMC/LSGBDCT BI Recording: Name
/SAPDMC/LSGCUST Server-Dependent Settings
/SAPDMC/LSGPRO Projects
/SAPDMC/LSGPROT Project: Name
/SAPDMC/LSGSUB Subprojects
/SAPDMC/LSGSUBT Subproject: Name
/SAPDMC/LSGUSDFI LSMW Files Used
/SAPDMC/LSMCUST Client-Dependent Settings (IDoc Inbound Processing)
/SAPDMC/LSOALG Action Log
/SAPDMC/LSOATT Object Attributes
/SAPDMC/LSOCOD ABAP Code of Conversion Rules
/SAPDMC/LSODOC Documentation
/SAPDMC/LSOFIL File Paths and File Names
/SAPDMC/LSOFIS File Names per R/3 System
/SAPDMC/LSOFIW Files: Values for Wildcard '*'
/SAPDMC/LSOFLD Source Fields
/SAPDMC/LSOINF Legacy Data: Not Yet Used
/SAPDMC/LSOINP Legacy Data: Files
/SAPDMC/LSOINS Legacy Data: Assignment of Files to Source Structures
/SAPDMC/LSOLOG Log Info per Object and Work Step
/SAPDMC/LSOMAP Field Mapping
/SAPDMC/LSOPAR Diverse Parameters
/SAPDMC/LSOPRT Flow and Message Log
/SAPDMC/LSOREC Recordings per Object
/SAPDMC/LSOREL Structure Relationships
/SAPDMC/LSORUL Rule Category
/SAPDMC/LSOSTR Source Structures
/SAPDMC/LSOTXT Objects: Name
/SAPDMC/LSRATT Central Rules: Definition and Attributes
/SAPDMC/LSRCOD Central Rules: Code
/SAPDMC/LSRTXT Central Rules: Name
/SAPDMC/LSRVLI Central Rules: Interval Translation Values
/SAPDMC/LSRVLO Central Rules: 1:1 Translation Values
/SAPDMC/LSUCUST Personal settings
/SAPDMC/LSUMENU User Menu
/SAPDMC/LSUPROF User Profile
You also can find general information of your projects with: Goto -> Administration
Regards,
Álvaro

LSMW ERROR IN FOLLOWING CODE SHOWING ERROR AT LINE NO 79

ALL GURUs,
I AM CREATING A NEW LSMW (RECORDING TYPE), FOR MOVEMENT TYPE 309,BUT AT THE 11TH LEVEL IN (CONVERT DATA) DUMP IS COMING SHOWING THE ERROR
in the Include "/1CADMC/SAP_LSMW_CONV_00000124 " in line 79:
"For type "C", a length specification from 1 to 65535 is allowed.
PL. HELP ITS VERY URGENT.
PONTS WILL BE REWARDED FOR CORRECT SOLUTION
LSM Workbench: Data Conversion Program
Program: /1CADMC/SAP_LSMW_CONV_00000124
Date: 11.02.2008
Time: 19:07:03
User: VMDM_SUNITA
Project: CUTOVER
Subproject: BALANCES
Object: TRIAL
report /1CADMC/SAP_LSMW_CONV_00000124
message-id /sapdmc/lsmw.
Global data definitions and table declarations
include:
/SAPDMC/SAP_LSMW_INC_GLOBALS.
Additional data definitions and table declarations
include:
/sapdmc/sap_lsmw_conv_data.
Target structure definitions
data:
begin of TRANSFERPO occurs 0,
 TABNAME(000030) type C,
 TCODE(000020) type C,
 TRANSACTION_TYPE(000003) type C,
 REFERANCE(000003) type C,
 MOVEMENT_TYPE(000003) type C,
 DOC_DATE(000010) type C,
 POSTING_DATE(000010) type C,
 OUTPUT(000001) type C,
 LINE(000004) type C,
 SOURCE_ITEM(000040) type C,
 DEST_ITEM(000040) type C,
 SOURCE_PLANT(000030) type C,
 DEST_PLANT(000030) type C,
 SOURCE_SLOC(000016) type C,
 DEST_SLOC(000016) type C,
 QUANTITY(000017) type C,
end of TRANSFERPO .
data:
init_TRANSFERPO like TRANSFERPO,
prev_TRANSFERPO like TRANSFERPO.
Source structure definitions
data:
begin of LSMW_TP309,
 DOC_DATE(008) type C,
 POSTING_DATE(008) type C,
 LINE(004) type C,
 SOURCE_ITEM(018) type C,
 DEST_ITEM(018) type C,
 SOURCE_PLANT(004) type C,
 DEST_PLANT(004) type C,
 SOURCE_SLOC(004) type C,
 DEST_SLOC(004) type C,
 QUANTITY(010) type C,
end of LSMW_TP309.
data:
begin of TP309 occurs 0.
 include structure LSMW_TP309.
data: recnr_000001 type i.
data:
end of TP309.
Counters
data:
g_cnt_TP309 type i.
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_TRANSFERPO type i,
cs_TRANSFERPO type i.
Fixedvalues
data:
fv_309TRF(000000) type C.
parameters:
p_filept no-display,
p_trfcpt no-display,
p_packge(5) type n no-display.
Select-option for wildcard value in file names
selection-screen begin of block selopts3
 with frame title text-003.
select-options:
so_wldcd for /sapdmc/lsofiw-wildcardvalue no-display.
selection-screen end of block selopts3.
initialization.
Object identifer
g_project = 'CUTOVER '.
g_subproj = 'BALANCES '.
g_object = 'TRIAL '.
g_objecttype = '02'.
start-of-selection.
Initializations
perform initializations.
Reset counters and flags
perform reset_counters_and_flags.
Reset tables
perform reset_tables.
Create initial structures with nodata characters
perform create_initial_structures.
Assign values to fixedvalues
read table gt_lsratt with key
 ruletype = con_rule_fixedvalue
 rulename = '309TRF'.
if sy-subrc = 0.
 if gt_lsratt-fixedvalue is initial.
 write: / text-019, '309TRF '.
 else.
 fv_309TRF = gt_lsratt-fixedvalue.
 endif.
endif.
Execute data conversion.
perform execute_data_conversion.
Final message
perform final_message.
Close files
perform close_files.
Write protocol.
perform write_protocol.
End program
exit.
Form Routines
include:
 /sapdmc/sap_lsmw_conv_forms,
 /sapdmc/sap_lsmw_conv_prot.
*& Form execute_data_conversion
 text
form execute_data_conversion.
data: struc_length type i.
do.
 perform read_next_record.
 if g_flg_end_of_file = yes. exit. endif.
 case g_record.
 when 'TP309'.
 if g_flg_convert_transaction = yes.
 perform convert_transaction.
 perform clear_source_tables.
 else.
 g_flg_convert_transaction = yes.
 endif.
 assign gs_buffer-data to <g_buffer_to_struc>
 casting like lsmw_TP309.
 move-corresponding <g_buffer_to_struc> to TP309.
 TP309-recnr_000001 = g_cnt_records_read.
 append TP309.
 add 1 to g_cnt_TP309.
 add 1 to g_cnt_transactions_read.
 when others.
perform insert_message using ... .
 endcase.
 if ( so_tcntr-option = 'BT' and
 g_cnt_transactions_read > so_tcntr-high ) or
 ( so_tcntr-option = 'EQ' and
 g_cnt_transactions_read > so_tcntr-low ).
 exit.
 endif.
enddo.
Process last transaction.
perform convert_transaction.
perform clear_source_tables.
endform. "execute_data_conversion
*& Form convert_transaction
 text
form convert_transaction.
check so_tcntr.
loop at TP309.
 perform convert_0001. " TRANSFERPO
ENDLOOP.
End of transaction
transfer_transaction.
endform. "convert_transaction
*& Form clear_source_tables
 text
form clear_source_tables.
clear TP309[].
endform. "clear_source_tables
*& Form create_initial_structures
 text
form create_initial_structures.
perform initialize_with_nodata using
 'TRANSFERPO' init_TRANSFERPO.
endform. "create_initial_structures
*& Form convert_0001
 text
form convert_0001. " TRANSFERPO
check g_skip_transaction = no.
g_skip_record = no.
g_record = 'TRANSFERPO'.
--- __BEGIN_OF_RECORD__
TRANSFERPO = INIT_TRANSFERPO.
--- TRANSFERPO-TABNAME
TRANSFERPO-TABNAME = 'TRANSFERPO'.
--- TRANSFERPO-TCODE
TRANSFERPO-TCODE = 'MIGO'.
--- TRANSFERPO-TRANSACTION_TYPE
TRANSFERPO-TRANSACTION_TYPE = 'A08'.
--- TRANSFERPO-REFERANCE
TRANSFERPO-REFERANCE = 'R10'.
--- TRANSFERPO-MOVEMENT_TYPE
TRANSFERPO-MOVEMENT_TYPE = '309'.
--- TRANSFERPO-DOC_DATE
TRANSFERPO-DOC_DATE = TP309-DOC_DATE.
--- TRANSFERPO-POSTING_DATE
TRANSFERPO-POSTING_DATE = TP309-POSTING_DATE.
--- TRANSFERPO-OUTPUT
TRANSFERPO-OUTPUT = '2'.
--- TRANSFERPO-LINE
TRANSFERPO-LINE = TP309-LINE.
--- TRANSFERPO-SOURCE_ITEM
TRANSFERPO-SOURCE_ITEM = TP309-SOURCE_ITEM.
--- TRANSFERPO-DEST_ITEM
TRANSFERPO-DEST_ITEM = TP309-DEST_ITEM.
--- TRANSFERPO-SOURCE_PLANT
TRANSFERPO-SOURCE_PLANT = TP309-SOURCE_PLANT.
--- TRANSFERPO-DEST_PLANT
TRANSFERPO-DEST_PLANT = TP309-DEST_PLANT.
--- TRANSFERPO-SOURCE_SLOC
TRANSFERPO-SOURCE_SLOC = TP309-SOURCE_SLOC.
--- TRANSFERPO-DEST_SLOC
TRANSFERPO-DEST_SLOC = TP309-DEST_SLOC.
--- TRANSFERPO-QUANTITY
TRANSFERPO-QUANTITY = TP309-QUANTITY.
--- __END_OF_RECORD__
transfer_record.
g_skip_record = no.
endform. "convert_0001

the bad guy is
data:
fv_309TRF(000000) type C.
check the definition of this fixed value in step 6, especially whether output length is > 0.
Then generate the conversion program and try again.
Cheers
Thomas

Idoc is getting posted successfully but no table entries found in but000

Hi Abapers
 IM working on CRM Business partner data Migration using LSMW idoc method with Message Type  CRMXIF_PARTNER_SAVE_M Basic Type  CRMXIF_PARTNER_SAVE_M02
i can see the status as 53 i.e crmxif_partner_save function module got posted successfully i have done debugging also. but when i check in se11 but000 table its says for the specified business partner number no table entries found can any one help what exactly is happening quikly reply would help me to solve the issue.

Hi Madhu,
 I have checked the staus of longtext for that idoc where in i could see this message Function module CRMXIF_PARTNER_SAVE has been called successfully
Message no. BXX086
but when i debug once again the lsmw i could see in subroutine From Transfer_idocs the sy-subrc is getting 4 and one read statement is not fetching values what would be going wrong.
FORM transfer_idocs.
971
972 DATA:
973 l_text(132),
974 l_lines TYPE i,
975 l_idoc_nr_from TYPE i,
976 l_idoc_nr_to TYPE i,
977 l_idoc_nr_from_char(10),
978 l_idoc_nr_to_char(10),
979 l_edkp1 LIKE edkp1, "YOG280800
980 l_edk21 LIKE edk21. "YOG280800
981
982 READ TABLE gt_pack_edi_dc40 INDEX 1.
983 CHECK sy-subrc = 0. (here sy-subrc =4 condtion is failing to proceed further)
984
985 * Senderdaten korrekt? YOG280800
986 l_edkp1-mandt = sy-mandt. "YOG280800
987 l_edkp1-parnum = gt_pack_edi_dc40-sndprn. "YOG280800
988 l_edkp1-partyp = gt_pack_edi_dc40-sndprt. "YOG280800
989 CALL FUNCTION 'EDI_AGREE_PARTNER_READ' "YOG280800
990 EXPORTING "YOG280800
991 rec_edkp1 = l_edkp1. "YOG280800
992 IF sy-subrc <> 0. "YOG280800
993 MESSAGE i810(/sapdmc/lsmw) WITH gt_pack_edi_dc40-sndprn "YOG280800
994 gt_pack_edi_dc40-sndprt."YOG280800
995 EXIT. "YOG280800
996 ENDIF. "YOG280800
997
998 l_edk21-mandt = sy-mandt. "YOG280800
999 l_edk21-sndprn = gt_pack_edi_dc40-sndprn. "YOG280800
l_edk21-sndprt = gt_pack_edi_dc40-sndprt. "YOG280800
l_edk21-mestyp = gt_pack_edi_dc40-mestyp. "YOG280800
l_edk21-mescod = gt_pack_edi_dc40-mescod. "YOG280800
CALL FUNCTION 'EDI_AGREE_IN_MESSTYPE_READ' "YOG280800
 EXPORTING "YOG280800
 rec_edk21 = l_edk21. "YOG280800
IF sy-subrc <> 0. "YOG280800
 MESSAGE i811(/sapdmc/lsmw) WITH gt_pack_edi_dc40-mestyp."YOG280800
 EXIT. "YOG280800
ENDIF. "YOG280800
Actionlog-Eintrag am Anfang
IF g_flg_first_time = yes.
 CALL FUNCTION '/SAPDMC/LSM_ACTIONLOG_INSERT'
 EXPORTING
 project = g_project
 subproj = g_subproj
 object = g_object
 stepnr = '901'
 EXCEPTIONS
 parameter_error = 1
 insert_error = 2
 OTHERS = 3.
 g_flg_first_time = no.
ENDIF.
DESCRIBE TABLE gt_pack_edi_dc40 LINES l_lines.
ADD l_lines TO g_cnt_records_transferred.
DESCRIBE TABLE gt_pack_edi_dd40 LINES l_lines.
ADD l_lines TO g_cnt_records_transferred.
l_idoc_nr_from = g_cnt_transactions_transferred -
 g_cnt_idocs_package + 1.
l_idoc_nr_from_char = l_idoc_nr_from.
l_idoc_nr_to = g_cnt_transactions_transferred.
l_idoc_nr_to_char = l_idoc_nr_to.
l_text = 'IDocs werden übertragen (& bis &) ...'(006).
REPLACE '&' WITH l_idoc_nr_from_char INTO l_text.
REPLACE '&' WITH l_idoc_nr_to_char INTO l_text.
CONDENSE l_text.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
 EXPORTING
 text = l_text.
CALL FUNCTION 'IDOC_INBOUND_ASYNCHRONOUS'
 TABLES
 idoc_control_rec_40 = gt_pack_edi_dc40
 idoc_data_rec_40 = gt_pack_edi_dd40.
CLEAR:
 g_cnt_idocs_package,
 gt_pack_edi_dc40[],
 gt_pack_edi_dd40[].
ENDFORM. "TRANSFER_IDOCS

Ligical Path Error at LSMW

Hi,
I am in process of creating a LSMW with standard object for Purchase Order.
At the step of assigning Input File, system is giving me error as 'No Logical Path has been specified' (Message Number - /SAPDMC/LSMW_OBJ_060046).
Can anyone tell, how this error can be resolved?
Regards,
Prashant

hi,
When you make assignment for transaction FILE...you have to give the logical file and physical file name..
check assignments properly...
Also check sap note 753711
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Oct 8, 2010 10:54 AM

Very important OSS Note issue

Hi ,
i have to implement an OSS Note 409645 .
we need to do very small changes in Program /SAPDMC/LLSMW_GLO_020F03.
But we are getting information message '' No valid change license available for namespace /SAPDMC/ '' after this action terminates.
i am unable to understand some points mentioned in description of OSS Note
can any one please help me in understanding it and help us how to implement this note
Long Text
Symptom
When importing a project (export/import via text files), the following
error occurs:
Error while importing project xxxxxxx (table /SAPDMC/LSMCUST)
Message number /SAPDMC/LSMW_GLO_010046
Additional key words
Cause and preconditions
The error was caused by an incorrectly exported record.
Solution
If you have not yet done so, change the namespace role of the /SAPDMC/
namespace from 'P' to 'C' using the tools in transaction SE01.
Then implement the attached correction in the include
/SAPDMC/LLSMW_GLO_020F03 of the exporting system.
Repeat the export, the export should then no longer export the incorrect
line. After that, repeat the import into the target system.

Hello Gaurav,
From my understanding, this note was two steps of implementation:
- Manual steps
- Program corrections
In manual steps, it seems you have to use transaction SE01 to change some configuration. To do this, check:
- Enter SE01 transaction
- Click on icon 'Transport Organizer Tools'
- Double click on entry 'Display/Change Namespaces'
- Search for entry namespace /SAPDMC/ and change 'namespace role' attribute from P to C.
For program corrections, you can implement them using SNOTE. It is the most recomended procedure.
Hope that this may help you.
Kind regards.

Message with IDOC number, created by LSMW, missing in job log in SM37

Hi gurus,
We have a temporary interface which uses LSMW to create IDOCs and update in SAP. It's used for materials, BOMs and document info records. In LSMW we have defined standard message types MATMAS_BAPI, BOMMAT and DOCUMENT_LOAD for the IDOCs. All these have the same problem.
A background job runs and starts LSMW. In the job log in SM37 I want to see which IDOCs were created. For some reason this is different in my development system and my test system, and as far as I know all settings should be the same. In the test system LSMW creates more message lines in the job log, than it does in the dev system. Message number E0-097 is "IDOC XXXX added", and this is missing in the dev system.
This is what it looks like in the dev system:
Data transfer started for object 'MATMAS' (project 'X', subobject 'Y')             /SAPDMC/LSMW   501    I
Import program executed successfully                                                             /SAPDMC/LSMW   509    I
File 'XXX.lsmw.read' exists                                                                               /SAPDMC/LSMW   502    I
Conversion program executed successfully                                                    /SAPDMC/LSMW   513    I
Data transfer terminated for object 'MATMAS' (project 'X', subproject 'Y')       /SAPDMC/LSMW 516    I
And this is what it looks like in the test system. More information, which is exactly what I want in dev system too:
Data transfer started for object 'MATMAS' (project 'X', subobject 'Y')             /SAPDMC/LSMW   501    I
Import program executed successfully                                                             /SAPDMC/LSMW 509    I
File 'XXX.lsmw.read' exists                                                                               /SAPDMC/LSMW 502    I
Conversion program executed successfully                                                    /SAPDMC/LSMW 513    I
File 'XXX.lsmw.conv' exists                                                                              /SAPDMC/LSMW   502   I
IDoc '0000000002489289' added                                                                      E0                         097   S
File 'XXX.lsmw.conv' transferred for IDoc generation                                      /SAPDMC/LSMW   812   I
Data transfer terminated for object 'MATMAS' (project 'X', subproject 'Y')      /SAPDMC/LSMW   516   I
In both cases the IDOC is created and update works fine.
My only issue is that I can't see the IDOC number in the dev system. I know I can get the IDOC number in WE02, but in this case we have program logic which reads the job log to be able to check IDOC status before sending OK message back to the other side of the interface.
I hope any of you can have an idea how I can update somewhere to get message E0-097 with IDOC number into the log.
Regards,
Lisbeth

Hi Arun,
If you want to show your messages in the job log you have to use the MESSAGE statement. In case you use WRITE statements an output list be created which can be found in the spool (there is an icon to go to the spool directly).
Regards,
John.

Message-mappings: stored in which database-table?

Hello everybody,
I want to code some ABAP to check some message-mappings.
Does anybody know in which DB-tables the mapping including the mapping steps are stored?
Thanks a lot.
Regards Mario

Hi Muller,
Check these tables,
/SAPDMC/LSOMAP Field Mapping
/SAPTRX/SCAOTMAP 
/SAPTRX/SCCNDMAP /SAPTRX/SCEVTMAP 
/SAPTRX/SCFUNMAP /SAPTRX/SCSOMAP 
or Just say map in SE11 and u will get a list..
Regfards,
Sridhar

LSMW error message

Hi,
While doing LSMW, step-3 Maintain Source Fields I have encountered the following problem
"Error when uploading file 'D:\Documents and Settings\ethirajan.v.raghavan\Des' (return code 13)."
Message no. /SAPDMC/LSMW_OBJ_020015
Can someone guide me to rectify this step by step?
Vengat

Hi,
I have sent you an Attachment.. to your mail ID
Check it once.
Anand K
Edited by: Anand K on Mar 6, 2008 1:46 PM

Error LSMW - /SAPDMC/LSMW_OBJ_060045

Dear experts,
I'm in trouble when I do the LSMW for BOM loads (SAP PP).
Follows the error attached, no message: / SAPDMC/LSMW_OBJ_060045.
I believe the error is in the file conversion in T_CODE FILE. But I can not find.
Please help me.
Thanks.
Cristiane.

did you maintain all this entries for logical path and logical file manually in transaction FILE, or did you leave it to LSMW to create them automatically?
I just did a quick test in my IDES and let LSMW do it on its own. Just entered the name that I wanted for logical file and logical path and hit enter.
Comparing it with your entries I do not see much difference, except that my entries have all a description, and I did not use any underscores in the name of logical path and logical file, just one single word.
A major difference is that I am on a Unix server and you are on a windows NT, so I don't know if your physical file is sufficient described.
Try it again with auto creation from LSMW using a short name without underscores for logical path and file and let me know

Tables for XI messages

Hi all,
Can any one please give me list of DB tables which are used for XI messages.
Any links, docs, threads would help me
reg,

HI,
SXMSPMAST, SXMSCLUP, SXMSPCLUR
the last two are cluster tables
and you won't get XML messages directly from them
have a look inside them
The classes that reads this information in SXMB_MONI are abap classes,
(can be seen at SE24) it is quite difficult to use them,
you might debug SXMB_MONI or use SE30 and see all the classes
that have been used.
You can use value mapping if you are not looking at picking up values from application system.It is just like SM30 transcation.You can get the info under SAP XI->Design and Configuration->Configuration->Value Mapping.
Also see the
these tables,
/SAPDMC/LSOMAP Field Mapping
/SAPTRX/SCAOTMAP
/SAPTRX/SCCNDMAP /SAPTRX/SCEVTMAP
/SAPTRX/SCFUNMAP /SAPTRX/SCSOMAP
/people/udo.martens/blog/2006/02/16/own-logging-of-xi-messages
message-mappings: stored in which database-table?
sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
http://help.sap.com/saphelp_nw04s/helpdata/en/44/a1b46c4c686341e10000000a114a6b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ef/45393c3eb3036be10000000a11402f/frameset.htm
Regards
Chilla
reward points if it is helpful..

Message no. /SAPDMC/LSMW804

Similar Messages

Maybe you are looking for