Message no. SG028 Ambiguous... exchange rate relation

Hi Friends,
I have a free of charge order. While doing the Post Goods Issue step, I am getting the following error message
Ambiguous EUR/USD exchange rate relations
Message no. SG028
I have searched in the forum and made sure that in transaction OB08 Exchange Rate EUR/US and USD/EUR (Exchange Rate Type M) has maintained properly in the system.
I have also made sure that the entries are properly maintained in SPRO - General Settings - Currencies - Define Translation Ratios for Currency Translation.
But still the error is coming, I saw in one thread, some one has reported the same problem even after maintaining the exchange rates in OB08, but no solution was suggested as far as I check. could anyone please give some inputs why the same error coming even though the exchange rates are maintained and how to fix this issue as I stuck in Post Goods Issue step
Thank you

Hi Christian,
Thanks for your time.
I've found the below entries in OBBS
M   USD    EUR     01.01.1900        100 : 1
M   EUR    USD     01.01.1900         1    : 100
Alternative currency is blank in both entries
In OB07 for exchange rate Type M all the fields (Ref. currency, Buy and Sell rate) and the check boxes are blank. it is still unclear for me being a logistics guy
While doing Post Goods Issue in other scenario I didnt have any error where currency GBP EUR invovled. In this case the OBBS entries EUR/GBP as below
M   GBP    EUR     01.01.2000        1 : 1
M   EUR    GBP     01.01.2000        1 : 1
Alaternative currency is blank in this case as well.
Does the valid from date or the ratio make any difference?
I could not clarify with my FI consultant as he is on vacation. Could you please let me know how to fix it.
Thank you

Similar Messages

Ambiguous INR/EUR exchange rate relations

HI Experts,
I am stuck with this problem from past one week please help.
I have loaded data from SRM system to BI system and there is no problem with data in PSA but when tried to load data from PSA to ODS using DTP i get
"Ambiguous INR/EUR exchange rate relations" Message and click of OK it dumps with message_x
i further debuged and that this is happening in RSW_CURRENCY_TRANSLATION FM where it is trying to convert Document currency to local currency.
I also check in OB08 where exchange rate is also maintain properly
below is the parameter i am sending to FM
Test for function group RSW0
Function module RSW_CURRENCY_TRANSLATION
Uppercase/Lowercase
Import parameters Value
I_CTTNM 0SR_DEFCUR
I_AMOUNT 0,0000000000000000E+00
I_SCUR INR
I_TCUR EUR
I_TIME_IOBJVL 20070323
I_SCUR_IOBJVL
I_TCUR_IOBJVL
I_PERIV
I_RATE 0,0000000000000000E+00
I_VDATE
and below are the entried maintained in OB08
M 01.10.2005 X 1 EUR = 56,00000 X 1 INR
0022 01.03.2000 X 1 INR = 1,00000 X 1 EUR
M 01.10.2005 X 1 INR = 0,01700 X 1 EUR
M 01.03.2000 X 1 INR = 1,00000 X 1 EUR
Please help.......
Best Regards
Falgun

Hi Anil,
I am getting the same problem. How did you solve the problem in your system?
Thanks and regards,
Renato Morais

"Ambiguous EUR/INR exchange rate relation "

Hi All,
While saving stock in "MB1C"
I encounter an error "Ambiguous EUR/INR exchange rate relation " I have tried to post new exchange rate in "ob08" for "M" but its not serving the purpose.
Plz help
Regards

hi
u have to omaintain exchange rate for type M for Eur to INR and INR to EUR in OB08
regards
kunal
award if helpful

Infoobjects for currencies and exchange rates related data

Hi Experts,
Please tell me standard Infoobjects for currencies and exchange rates related data that have been made available for third party tools?
Any useful answer will be rewarded with suitable points.
Thanks!

Rohan
Use 0currency - for currency
0unit for unit of measures
Arun

Exchange rate related issue

Dear Friends,
At the time of PO (ME21N), I have check the box of "Exchange Rate Fixed" and it works fine and fetches the same exchange rate MIRO Info..(Exchange Rate and Currency is copied from Purchase Order # ).
After creation of PO, I am going to create Down Payment Request at F-47 and gives the exchange rate manually and post the document obviously it takes the same.
The issue is with APP (F110), while i am editing the Proposal, It shows the table EXCHANGE RATE after running the it. The exchange rates fetches from the table.
Note: I had checked the FBZP settings for paying company code
Please look into it ...Thanks in Advance
Thanks
Chakri

Dear Prasad,
Thank you for your earliest reply...But can u please tell me is der any config setting that it will hit only PRD account and not other
Regards
Nainesh

Ambitiguous EUR/INR exchange rate relations...

this error comes when i tried to create PO...

Hello,
if its Euro then always select "EURX" and NOT "M"
therefore in OB08, position EURX followed by from INR to EUR

Message appears at time of query results: NO EXCHANGE RATE FROM

I am executing query using a new currency translation type "ZPERAVG". Variable time reference is defined on End of period for 0FISCPER with exchange rate M1 (Monthly Average). Tested successfully. Purpose is to represent monthly values at differing monthly conversion rates. When I employ this object in existing queries I am getting informational messages as follow:
NO EXCHANGE RATE FROM EUR to USD and Date 01/31/2004. This repeats 23 other time for periods to 12/31/2005. My TCURR table does not include these M1 conversions. First period is 01/31/2006. Is there a way around this nuisance message. It will only confuse the user community.
A second information message also may occur: Error occurred during currency .... however, results appear correct.
I have no explanation as to why these random messages appear.

You will have to upate TCURR with monthly average exchange rates for each month starting with January 2004 and going through December 2005, for conversion from Euros to US Dollars. The error being thrown is truly an error because the system is unable to calculate the conversion due to no exchange rate being available for the timeframe.
Edited by: Dennis Scoville on Sep 18, 2009 4:00 PM

Trigger 'Exchange rate' error message in VF01 refers to Sales Order

Dear Gurus,
Currently if Billing is created referring to Delivery Order, program will check and trigger error message to check the Exchange Rate in Sales Order. I think the program (for the user exit) involve is RV60B901.
Now I want the system to trigger the same checking but the Billing is created referring to Sales Order.I've checked with the ABAPer, but it is said that the user exit to be used is different. Does anyone knows what user exit can be use for this?
Thanks in advanced.

Hi
Please check in VTFA ,wheather PricingExchangeRateType feild has been maintained or not.Check wheather the exchange rate is getting copied or not.If it is getting copied then it means it is working fine.If it is not getting copied then maintain Price source in VTFA also.
Also check what is the item category you are using and item category details wheather properly it has been configured
Regards
Srinath

No daily exchange rate defined for rate type Corporate

We are entering a transaction in AR for currency XDR (Nav Path in Receivables: Transactions->Transactions; Form Name: ARXTWMAI, FOrm Version: 11.0.62).
The currency XDR is supposed to be IATA Rate related and has nothing to do with Corporate Exchange Rate (i.e. Bank rate). We have IATA Rate and Corporate conversion rate types (Nav Path in Receivables: Setup->Financials->Currencies->Rates->Conversion Type).
While entering the transaction, we get this message:
"FRM-40735: ON-INSERT trigger raised unhanled exception ORA-20000.
ORA-20000: GLMCCURB: There is no daily exchange rate defined from XDR to MUR for MAY-00 for rate type Corporate.
ORA-06512: at "APPS.RA_MRC_CUSTOMER_TRX_BIUD", line 318
ORA-04088: error during exception of trigger 'APPS.RA_MRC_CUSTOMER_TRX_BIUD'
ORA-06512: at "APPS.ARP_PROCESS_HEADER_INSRT_COVER", line 786
ORA-06512: at line 1
APP-01728: An assignment does not exist for these parameters.
Cause: An attempt was made to find a sequence for this document flexfield. The option says Sequential Numbering is only partially used.
Action: None is necessary unless you expected this document flexfield to have a sequence defined."
We checked the Daily Rates from XDR to MUR (Nav Path in Receivables: Setup->Financials->Currencies->Rates->Daily) and it shows only IATA rates, which is correct since XDR is not for Corporate rate type.
What we don't understand is why the error message prompts for an exchange rate to be defined from XDR to MUR for rate type Corporate.
Where is it defined that the transaction should look for rate type Corporate? Should I define it to look for IATA rate type for such kind of transaction?
Can anyone advise. Thanks.

Andrew Li,
1.For the first message, please check to your DBA, maybe there is some patches should apply.
2. For the error msg APP-01728: An assignment does not exist for these parameters. Do you use document sequence number ? If Yes, make sure your document sequence has been assigned to proper SOB, and then please check profile option for Sequential Numbering. The Sequential Numbering profile should Partially Used or Always Used.
I hope it will solve your problem
Regards
Mahendra
null

Exchange rate type not defined for country

Hi All,
I have noticed an error message during testing of postings using tax codes. The error message nbr is FF802 (Exchange rate type is not defined for country XX). When we are testing postings on accounts for which tax code is ignored (not relevant) it is ok. Could you please let me know where exactly we have settings and how it is related to the tax codes ? I have never seen that connection previously.
Thanks,
Points will be rewarded afterwards.
Tomasz

Hi Tomasz,
The exchange rate types are defined at country level in General Settings and the company codes with that country can access that. Normally the exchange rate types are defined as M, P, B and G. M is for average rate and is used in FI, while P is for planning in CO.
Regd
Bharat

Exchange Rate Difference Accounts are Incomplete

There's a situation where the user is trying to clear the transaction using F-04 for clearing outgoing checks account in CAD. however the system gives a message "Ex rate diff. accts are incomplete for account 1100000 currency CAD".
This situation exists only in Production and not in QA or DEV. However, there is no configuration change between PRD & QA,
There is account configured for ExchagenRate difference realized in OBA1 for the reconciliation account 2100000, same as in QA and DEV. not able to figure out where is the issue.

Hello
As per the message you need to maintain the exchange rate differences for th account 1100000.
if there is no exchange rate difference then system wont give that error message, in quality and development exchange rates are not maintained daily thatu2019s the reason it wont give the error message
please maintain the exchange rate accounts for the account either with currency CAD or without any currency will resolve the issue
Thanks
Kameshwar Rao

Error while passing Exchange rates

Hi
We are trying to pass a IDOC to update the table TCURR for exchange rates. For one currency pair IDR to USD we have conversion factor as 10000 and when we try to pass with conversion rate as 1.12076, the IDOC fails with message
"After comparing factors : Exchange rate IDR/USD = 0 or is too great" - MEssage no E 016.
Please help us in resolvin the error
REgards
Malathi

hi
this issue seems to IDOC converstion problem ask them to your abaper to check the logic system unable to covert the factors of IDR/USD. may be you are maintained the wrong Exchange rate in table or Functional module converiosn was wrong
satish

Help me about Indexes and Exchange rate

I see in SAP B1 have form Exchange rates and Indexes. I don't know mean of Index. What does it use for? And Exchange rates relate to Indexes. I can't understand. Can you help me.

Hello Tien,
You are clever. There are also some member forums could not know how benefit the helpfiles for them and a certain member in this forum is called forum point seeker, take this as an opportunity.
Indexes in SAP B1 are used to define consumer price index (CPI). h
ere is the definition :
The Consumer Price Index (CPI) measures inflation as experienced by consumers in their day-to-day living expenses. (It is sometimes referred to as the retail price index.) There are separate indexes for two groups or populations of consumers:
The CPI for All Urban Consumers (CPI-U) is the index most often reported by the national media.
The CPI for Urban Wage Earners and Clerical Workers (CPI-W) is the index most often used for wage escalation agreements.
The CPI inflation calculator allows customers to calculate the value of current dollars in an earlier period, or to calculate the current value of dollar amounts from years ago.
Consumer price indexes often are used to escalate or adjust payments for rents, wages, alimony, child support and other obligations that may be affected by changes in the cost of living. There is a fact sheet explaining how to use the CPI for escalating contracts.
A new price index called the Chained Consumer Price Index (C-CPI-U) is now available. This new measure is designed to be a closer approximation to a "cost-of-living" index than the CPI-U or CPI-W.
Based on that definition, we could obtain it as data when determining exchange rate in daily business or price of the inventory items
Rgds,
JM

Incorrect Exchange rate used for return deliveries

Hello Friends I have following problem can someone please help
Germany has produced a return document for a delivery in the month of April. The document type WL (GR) has been used for this. The customizing is set up for this document type to use the exchange rate type P. Anyhow, the system has used this x-rate type for the entry on the account 5000000 but the account 5500000 was translated with a different x-rate. After investigating we found out that the x-rate used is the ZPLN rate which was due on document day plus one (13th of April). As a result the account clearing with the transaction F.13 did not work. Additionally a PPV (exchange rate related) has been booked to bring the journal to zero were no PPV should have been booked.
After my research i found Return was done for 7 pc u2013 based on different exchange rate than goods receipt (exchange rate type P) u2013 now we are not able to clear this documents (using F.13) becouse amounts are not balanced.
Could someone Please help.and provide details what i need to do fix this
Regards
Vishal

can someone please help

IPI - No exchange rate indicator

Hi,
I was trying to execute IPI from consolidation monitor. I got error message stated that no exchange rate indicator for Balanca Sheet Items for period 2007/001.
The IPI design involved only local currency hence i don't need an exchange rate translation.
Pls advise. Many Thanks
Regards, Renee

Just a flexibility to use the type or indicator.
As you correctly mentioned, indicator is linked to a particular type.
It's simply easier to use several indicators comparing with potentially several hundreds of types.

Message no. SG028 Ambiguous... exchange rate relation

Similar Messages

Maybe you are looking for