Message not coming to Receiver system - File to RFC

I have a small problem in File to RFC connection. We are trying to create a PO using a BAPI. In the XI system , it shows the XML is processed successfully but PO is not generated in the R/3 system.
Is there any way to check whether the message has come to the receiver system. In fact we tried with a dummy insert command in a Z table . Even thats not happening. I thing the message is not at all coming to the receiver system, but the SXMB_MONI in Xi shows the message got processed successfully.
Do we need to make any settings in the Receiver system?

hi,
did you commit this bapi:
a) in the rfc adapter (in your communication channel) if you have sp14
b) in the bapi wrapper if you have < sp14 ?
https://websmp206.sap-ag.de/~sapdownload/011000358700000328352005E/HowtouseBAPandccBPM.pdf
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

Message Not coming to XI system

Hello,
Am Facing an issue in Production XI system. The issue is in File to RFC Interface,which is running on Daily basis,there is a daily job to Place the File on FTP server. The Problem is File is Picking by XI and File also archived in Archive directory,but Message not coming to XI system.I have checked in MONI and Sender communication channel,but not able to see any messages.The File Format is CSV,used FCC in sender channel.
Kindly help me to solve this problem,
Thanks,
Madhu

Hi Madhu
Please check the communication channel in RWB and see the channel is in error or not.
The channel should show some logs including message id.
Next check the RWB-->message monitoring-->adapter engine
The message could have failed there and hence does not present in MONI.
Finally make sure that none of other communication channels are polling in that same server.
In non-prod environment we some times use the same server credential for DEV and QA.
So if that is the case , then please deactivate the other channel so that you get the message in desired environment.

RFC not created in receiver system

Hi,
FIile-rfc received in receiver system until yesterday.now the RFC not reaching to receiver system.They are no changes and no change in RFC structure.
all the ques are clear and RFC connectin to the receiver system is alo fine and CC monitoring is also green and in the audit log everything is sucessful.sxmb?moni messages are sucessful.
please let me know where i can check ...
Regards,
hyma

Did you see any logs in receiver RFC channel?
Check the receiver service for interface in moni- SOAP header-Main document.
Also check if any conditions are specified in receiver determination.

IDOC in 03 staus but not coming to PI system..

Hi Experts,
I am working on IDOC to IDOC scenario.All of the IDOCs are in 03 status in R/3 system but some of the IDOCs are not coming to PI system.I checked SM58 also but its fine.
Should it be in 12 staus?
Is it possible that IDOC in status 03 can reach to the target system?
Please reply it asap.Its urgent.
Regards,
Vikram

Hi Vikram,
First of all, bd75 is only for status conversion. This means, that only IDoc statuses are changed, based on the status of the RFC call. IDocs are not despatched again by this transaction.
Secondly, you might want to check the EDI Port that is assigned in the partner profile, if it is pointing to the correct target system.
Finally, if target system is OK and you don't find anything in sm58 in sender system, then you should go to smq2 in PI and you should find your IDocs there, waiting in a blocked queue.
Hope this helps,
Greg

ALE using HRMDA message type - Comit not perform in receiving system

Hi,
I want to use ALE to transfer HR master data between two ECC instances. I have set-up all the configuration; distribution profile, filter etc... I tried to transfer the master data using standard SAP report RHALEINI.
The iDoc is generated and transfer correctly in the receiving system. The final status of the iDoc is 53 - Application document posted. The issue we have is that the comit to tables is not happening. Infotypes remains empty even if the status of the iDoc says it was posted. We are trying to transfer infotype 0000, 0002, 0001 and 0006
Anyone can help ?....
Thanks
Louis

Hi Ted,
Thanks for your answer,
Autorization is the first thing that we consider. We generate the IDOC by the program RBDMIDOC .
The job's user is the sap_all authorization. So it should not related with auth.
And this does not always occur. For example, two days ago it occurs, but today does not occur.
Best Regards
Hasan.

Bluetooth files not coming in received N8

files not coming in recevied files in my nokia n8. every time i send any file to my nokia n8 via bluetoot it goes to inbox (c) and i want it to go to e:recevied fies.. cant transfer large files and some some time zip filed goes to receved files but it does not take larg files..what to do..pl help

@gaurav_j
Welcome to the forum!
Is your N8 running Symbian Anna or PR1.2?
Have you tried deleting existing pairings and starting again?
Happy to have helped forum with a Support Ratio = 42.5

SAP is not coming up after system refresh with Export/Import option

Hi,
I have exported Java 6.40 and finished the refresh successfully. And I imported the Java successfully. After importing Java, I restarted SAP but is not coming up. When I checked the dev_w0 trace file, I got the following information.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Wed Aug 05 10:48:17 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno      00
M sid        IDS
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    247
M intno      20020600
M make:      multithreaded, Unicode
M pid        844
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 844) [dpxxdisp.c   1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm)          20328     (1452)
M DpShMCreate: sizeof(tm_adm)          2969176     (14772)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpShMCreate: sizeof(comm_adm)          290000     (580)
M DpShMCreate: sizeof(vmc_adm)          0     (424)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 05FE0040, size: 3391480)
M DpShMCreate: allocated sys_adm at 05FE0040
M DpShMCreate: allocated wp_adm at 05FE1B88
M DpShMCreate: allocated tm_adm_list at 05FE6AF0
M DpShMCreate: allocated tm_adm at 05FE6B18
M DpShMCreate: allocated wp_ca_adm at 062BB970
M DpShMCreate: allocated appc_ca_adm at 062C1730
M DpShMCreate: allocated comm_adm_list at 062C3670
M DpShMCreate: allocated comm_adm at 062C3688
M DpShMCreate: allocated vmc_adm_list at 0630A358
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0630A380
M DpShMCreate: allocated wall_adm at 0630A388
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 05 10:48:18 2009
M calling db_connect ...
C Prepending e:\oracle\IDS to Path.
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPIDS's password
C Connecting as /@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   05B17398   05B1C458   05B1BEC0
C Attaching to DB Server IDS (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84)
C Starting user session (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84,usrhp=05B256B8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    11395]
C Try to connect with default password
C Connecting as SAPIDS/<pwd>@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   05B17398   05B1C458   05B1BEC0
C Starting user session (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84,usrhp=05B256B8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    11395]
B ***LOG BY2=> sql error 1017   performing CON [dbsh#3 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 1017   performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9708]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Wed Aug 05 10:48:18 2009
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9893
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 844) [dpnttool.c   357]
I have checked database connectivity with the command 'r3trans -d', it got finished with the return code 0012 and the trace.log file is showing the following information.
=======================================
4 ETW000 r3trans version 6.13 (release 640 - 17.07.08 - 08:11:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 05.08.2009 - 10:52:31
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Wed Aug 05 10:52:34 2009                                  0.000000
4 ETW000 [dev trc     ,00000] db_con_init called                                        0.000000
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                                 0.000000
4 ETW000 [dev trc     ,00000] Loading DB library 'dboraslib.dll' ...                    0.000000
4 ETW000 [dev trc     ,00000] load shared library (dboraslib.dll), hdl 0          8449 0.008449
4 ETW000 [dev trc     ,00000]      using "f:\usr\sap\IDS\SYS\exe\run\dboraslib.dll"
4 ETW000                                                                              37 0.008486
4 ETW000 [dev trc     ,00000] Library 'dboraslib.dll' loaded                        18 0.008504
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000                                                                              27 0.008531
4 ETW000 [dev trc     ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.220)
4 ETW000                                                                             219 0.008750
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000                                                                              27 0.008777
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000                                                                              36 0.008813
4 ETW000 [dev trc     ,00000] New connection 0 created                              26 0.008839
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              34 0.008873
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         22 0.008895
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              25 0.008920
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              32 0.008952
4 ETW000 [dev trc     ,00000] Setting DIR_CLIENT_ORAHOME is not set as environment variable,
4 ETW000                        assuming using instant client with unspecified location.
4 ETW000                                                                             227 0.009179
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                        130 0.009309
4 ETW000 [dev trc     ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000                                                                              32 0.009341
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8         23827 0.033168
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPIDS's password           34 0.033202
4 ETW000 [dev trc     ,00000] Connecting as /@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
4 ETW000                                                                              35 0.033237
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              32 0.033269
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1   0253CDB0   02541E18   02541880
4 ETW000                                                                             112 0.033381
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       29 0.033410
4 ETW000 [dev trc     ,00000] Allocating server context handle                      25 0.033435
4 ETW000 [dev trc     ,00000] Attaching to DB Server IDS (con_hdl=0,svchp=025417D4,srvhp=025423DC)
4 ETW000                                                                              51 0.033486
4 ETW000 [dev trc     ,00000] Assigning server context 025423DC to service context 025417D4
4 ETW000                                                                           41860 0.075346
4 ETW000 [dev trc     ,00000] Allocating user session handle                        47 0.075393
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=025417D4,srvhp=025423DC,usrhp=0254AFA8)
4 ETW000                                                                              50 0.075443
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                            4381 0.079824
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              31 0.079855
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 1017         23 0.079878
4 ETW000 [dev trc     ,00000] Try to connect with default password                  80 0.079958
4 ETW000 [dev trc     ,00000] Connecting as SAPIDS/<pwd>@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
4 ETW000                                                                              28 0.079986
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              31 0.080017
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1   0253CDB0   02541E18   02541880
4 ETW000                                                                              32 0.080049
4 ETW000 [dev trc     ,00000] Assigning username to user session 0254AFA8           19 0.080068
4 ETW000 [dev trc     ,00000] Assigning password to user session 0254AFA8           25 0.080093
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=025417D4,srvhp=025423DC,usrhp=0254AFA8)
4 ETW000                                                                              32 0.080125
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                            1691 0.081816
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              28 0.081844
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 1017         18 0.081862
4 ETW000 [dblink      ,00428] ***LOG BY2=>sql error 1017   performing CON [dblink#3 @ 428]
4 ETW000                                                                             119 0.081981
4 ETW000 [dblink      ,00428] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 428]
4 ETW000                                                                              30 0.082011
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'IDS'"
=================================================================================
Kindly suggest me the solution to resolve the issue.
Thanks & regards,
Mogileeswar

Please check the logs it is clrerly mentioned thet your sapsystem is not able to connect to database.
ERROR => CONNECT failed with sql error '1017' [dbsloci.c 11395] B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ] B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ] B ***LOG BY2=> sql error 1017 performing CON [dblink#3 @ 428] [dblink 0428 ] B ***LOG BY0=> ORA-01017: invalid username/password
Check the Note------Note 713685 - Hom./Het.System Copy SAP Web AS 6.40
run these commands:
brconnect -u / -c -l E -f chpass -o SAPSR3 -password whatever_you_want
sqlplus /nolog @sapdba_role.sql SID NT
Also check the parameter DBS_ORA_SCHEMA is set to SAPSR3.
Also read note 400241.
Thanks
Rishi Abrol

ALE IDocs are not coming on Recieving System

Dear Experts,
I am sending Characteristics from my QA Server to PRD server. QA systems send the IDocs and Status in WE02 comes as 03, but i am not able to see the IDocs in PRD system. There WE02 shows 'No IDocs selected'. I have seen SM58 also in QA which shows message 'No authorization to send IDocs with message type C HRMAS'. Please guide me how to come out of this. Is this an authorization problem or any settings issue.
Thanks and Regards,
AKT

Hi,
As your problem says that you dont have otherization to create IDoc in the receiving system.
Check the RFC Destination created in QA (SM59).
Enter Logical system name of PRD.
Check the remote login username and password.
Now Click on the remote login available at the top.
I'm sure that it is a problem with the username and login that used in the creation of RFC Destination.
If that is the case, Ask the basis person to enter a valid username and password to access the PRD system.
Regards,
Sunil.

Output message not coming automatically for PO

hi
i cerated new output message sending PO to vendor by e-mail. I maintained condition records in MN04. Condition table, access sequence all are maintained. I included new output type into the control data of the existing schema RMBEF1 and the schema is assigned to PO also. Also maintain entry in following string SPRO- Material Management-Purchasing-Messages-Output control-Message Types-Define Message type for PO---Fine-Tuned Control: Purchase Order
Still the output message is not coming automatically while creating PO every time i add output type namually. please guide
regards

Hope you have maintained condition for combination. preferrably -
1) Purch Doc type > PORG > Vendor
2) Please make sure that, you have maintained the fileds which are relavant for output.(if you are making any changes in existing PO and you need output)
Hope this will help you

HTTP to RFC scenario (Message not coming to PI)

Hi PI Gurus,
I got one HTTP to RFC scenario. Its working fine in production. where as it is not working in QA sys.
Messages are not coming to PI (SXMB_MONI). Is anything is missed in SICF or SMICM.
Thanks,
Krishna

Hi,
How you are testing the interface.........if you are sending the message from HTTP client web page then check the error message in same web page.
for reference check below link.
http://www.****************/Tutorials/XI/HTTP/RFC.htm
HTTP client code.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Regards,
Phani

RFC adapters are not reconnecting after receiver system shutdown

Guys,
we have some RFC adapters which connect to some systems which go through offline backup procedures during weekends.
The problem is that the RFC adapters which connect to these systems aren't able to recognize that these systems are already online, and they keep showing the communication channel as with error status (in communication channel monitoring).
If we go to the adapter and reactivate it, then it connects normally the receiver system and gets a no-error status. But there are quite a few adapters and it's not practical to perform this every monday. :/
Does anyone know what should I set to make the RFC adapters to retry the connection after a while?
Regards,
Henrique.

Shabarish,
thank you very much!
I hadn't noticed that one. :o)
Ideally I'd like a way of retrying automatically, and not just by demand. But I guess that's as good as it gets...
Thanks a lot,
Henrique.

Warning Message not coming

Hi ,
In Function Exit i am displaying Message based on some condition. Error messages are coming fine when the condition is true but when i am trying to display warning messages for the same it is not coming .Could any one please tell me what would be the problem.
Thanks,
Kumar.

Hi Kumar,
When you throw error message processing stops that is why you are able to see it... Do you see some other message when use warning right..? If yes than change it to information and check...
Nabheet

Ios7 text messaging not sending, Nor Receiving

Since i've updated to the new ios7 my texts and picture text are not being reciveved by others who dont have a iphone, nor am I recieving their texts. Is anyone else having this issue? Couple of them have Veizon.

When you still have text message problem, this is working solution for me.
http://ketupek-bengkulu.blogspot.com/2013/12/solution-for-text-message-not-deliv er.html

RFC receiver channel, message not reflecting in Receiver ECC system

Hi All,
We are using Receiver RFC adapter to call a custom RFC (ASynchronous call). It was working fine, But now after we made a few changes in the mapping. The message is successful in PI, but it is not visible in ECC. When I check in RWB, I think the payload is not going correctly to ECC. I have re-imported the RFC and tried as well. It still does not work.
Kindlhy let me know what to do.
Rgds,
Mithun

Hi Rajhan,
My abaper is doing that, By that time, i just saw the payload in the message display tool(MDT) in RWB...
it looks like some junk data
"QT00010101000120120119201201202012012020121231USD38130511T-F399000110000010001585030512T-F299000110000010001210SP0000001002"
where as in sxmb_moni of PI system the payload after mapping is
"<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:BAPI_QUOTATION_CREATEFROMDATA2 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
- <QUOTATION_HEADER_IN>
<DOC_TYPE>QT</DOC_TYPE>
<SALES_ORG>0001</SALES_ORG>
<DISTR_CHAN>01</DISTR_CHAN>
<DIVISION>01</DIVISION>
<PMNTTRMS>0001</PMNTTRMS>
<QT_VALID_F>20120119</QT_VALID_F>
<QT_VALID_T>20120120</QT_VALID_T>
<CT_VALID_F>20120120</CT_VALID_F>
<CT_VALID_T>20121231</CT_VALID_T>
<CURRENCY>USD</CURRENCY>
</QUOTATION_HEADER_IN>
<SALESDOCUMENTIN>381</SALESDOCUMENTIN>
- <QUOTATION_ITEMS_IN>
- <item>
<ITM_NUMBER>30511</ITM_NUMBER>
<MATERIAL>T-F399</MATERIAL>
<PLANT>0001</PLANT>
<TARGET_QTY>100</TARGET_QTY>
<SHORT_TEXT />
<MATL_GROUP />
<CUST_GROUP />
<PMNTTRMS>0001</PMNTTRMS>
<PRICE_DATE />
<SHIP_POINT>0001</SHIP_POINT>
<TARGET_VAL>5850</TARGET_VAL>
</item>
- <item>
<ITM_NUMBER>30512</ITM_NUMBER>
<MATERIAL>T-F299</MATERIAL>
<PLANT>0001</PLANT>
<TARGET_QTY>100</TARGET_QTY>
<SHORT_TEXT />
<MATL_GROUP />
<CUST_GROUP />
<PMNTTRMS>0001</PMNTTRMS>
<PRICE_DATE />
<SHIP_POINT>0001</SHIP_POINT>
<TARGET_VAL>210</TARGET_VAL>
</item>
</QUOTATION_ITEMS_IN>
- <QUOTATION_PARTNERS>
- <item>
<PARTN_ROLE>SP</PARTN_ROLE>
<PARTN_NUMB>0000001002</PARTN_NUMB>
<NAME />
<REGION />
</item>
</QUOTATION_PARTNERS>
</ns1:BAPI_QUOTATION_CREATEFROMDATA2>"
ANY SUGGESTIONS... This is PI 7.1 so its auto commit for the RFC receiver adapter rite. should i tick some option or what else can we do
Rgds,
Mithun

Approval messages not coming back when approving by mail

Hello,
We are on SRM 4.0
Approval messages are sent from SRM to different approvers by mail. This works fine.
But when the person approves by mail this doesn't work.
In transaction sost messages are still with 'grey' status and in transaction scot messages are all in status 'in transit'.
This happens only in our Production environment.
Has anyone suggestions?
Thanks,
Laurent.

Further to my previous reply , please also check the following
>
In transit
Number of send orders that are currently in process
outside of the SAP system, that is, the messages have
been transferred to the external nodes by the SAPconnect
send process but neither a positive nor a negative status
message has been received
>
check the following in your system
transaction SCOT--> in the menu
Settings ---> confirmation of reciept
have you set the value to 'SAP connect does not expect confirm.for
internet mail ?

Message not coming to Receiver system - File to RFC

Similar Messages

Maybe you are looking for