Message - Not installed correctly unable to save or burn cd's to iTunes
I have recently purchased a new computer wich is running Windows Vista. I followed the moving music to a new computer guides on iTunes and I can update my Ipod, play and view all my music, videos and TV shows. I am having the following problems however.
1. When I start iTunes I get a message aying that it is not installed properly and I will be unable to load tracks from or burn to a CD. I have un and re-installed the latest ITunes and also re run the set up however I still conitinue to get the message. - Can anyone help?
2. When I moved my libray ITunes gave me a message that it was unable to register my iPod Games. - Again can anyone help?
Thanks
Message was edited by: Coutz
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.
Similar Messages
-
I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help
Have you worked through the tt2 user tip:Troubleshooting issues with iTunes for Windows updates this is the best source on resolving iTunes for Windows issues.
-
OK, spent about 25 frustrating hours so far this weekend doing everything recommended on numerous threads here -- uninstalling and reinstalling itunes and all Apple items. Help?
I am using Windows Vista home premium. After the last iTunes update to 12, it suddenly would not work. I followed, to a T, all instructions to uninstall all Apples software, in the correct order, reboot, download the latest iTunes, run as administrator, plug in the iPhone 5S, let the driver install, and then finish.
Along the way, I received the error that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I am the administrator and have privileges. (I previously followed instructions from anther thread to change the read-only privileges for Apple folders, but to no avail. I also deleted every file with the word Apple in it after I uninstalled everything.) I did a retry and then an ignore during installation of the AMD error, which I have received 10 times.
The other error I keep getting is: "iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7." I have done that 20 times.
Other frequent error: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)."
I followed other threads suggestions to install Windows .NET versions 3.5 and 4.0. No help. I also looked for various specific Apple files in various folders for DLLs, etc. Not present. I have rebooted 50 times and tried different users on my home account as well. Nothing.
I also followed instructions to Manage my computer under "services." Under Apple Mobile Device, the setting is for "automatic." When I try to get it to "start," the error I receive is "Windows could not start the Apple Mobile Device on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion." (I followed previous thread instructions to use the CMD prompt to stop it. That caused problems because the status was then "stopped," but I was able to restart it later once I figured that out -- but with the 1053 error again.)
I think I've tried every suggestion in every thread for the four errors I keep getting (AMD failed to start; iTunesHelper Error 7; Windows error 998; and AMD Error 1053.) I am fresh out of ideas and very frustrated. I mostly want to make sure I don't lose my music and photos, which I was about to sync.
The only other thing I see that is strange on my computer (which I discovered along the way) is that I cannot receive automatic windows updates and have not had an update since 2012. My iTunes worked a month ago, so that was obviously not a show-stopper in the past, but perhaps there is a Vista update I need for iTunes 12? I have service pack 2 for Vista. I have followed all threads to try to set my windows to automatic update, but no joy there either. It checks for updates and then fails. I followed instructions and did run an installation to install windows automatic updates, but that doesn't work either. I tried 10 times. It runs and takes a while, but is never able to successfully update windows. It says "checking for updates" for a while. Then it dies. My last update was 6/19/12 (failed) and it says the most recent check was 6/22/12, but I have tried 20 times on 10/31/14 and 11/1/14.
When asked to "Install new Windows Update software" to check for updates, I have done so 10 times. It downloads and installs, but never works.
It's an old Dell desktop computer from 2006, and I'm using an iPhone 5S. I am fresh out of ideas. Anyone really smart here?
Thanks.
TristanUpon latest reboot, I also received this error message: "The application failed to initialize properly (0xc0000005). Click OK to terminate the application."
Then I got the iTunesHelper not installed correctly error again.
Then the "Windows can't check for updates" error message.
Then "Apple Push has stopped working." Then a quick DEP error message that disappeared but said something about Apple Push being closed.
I'm also getting denials of service logged by McAffee. Not sure if I'm getting a virus/attack or not.
Not sure if it's a problem with my old desktop machine, my Windows Vista updates, or iTunes, but I'm very frustrated and out of ideas to try.
Thank you for your help!
Tristan -
After uninstalling itunes and reinstalling itunes many times as per apple support still get "itunes not installed correctly may not be able to burn or import CD's"this is the case.The computer is old the initial version of Itunes,probably version 7 worked and was able to burn CD's but after 2-3 new versions started to get this message when opening Itunes,all other aspects work.
After uninstalling itunes and reinstalling itunes many times as per apple support still get "itunes not installed correctly may not be able to burn or import CD's"this is the case.The computer is old the initial version of Itunes,probably version 7 worked and was able to burn CD's but after 2-3 new versions started to get this message when opening Itunes,all other aspects work.
-
Yesterday I updated my Itunes account and it stopped working. I tried installing itunes version 11.1.4 and once done it came back with 2 error messages MsvCR80.dll was not found and I tunes was not installed correctly Error 7 (windows error 126) I have removed Itunes completely and redownloaded several times with the same result. Is there an easy fix or can I download an older version of Itunes that works?
None of the solutions mentioned in this forum work for me. I've not ever had a problem with your software before. I installed and uninstalled itunes 3 times. No itunes directories exist. I've uninstalled everything labled Apple on my pc withe the same results. The problem is with your software not Windows.
-
I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open. First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I am unable to reinstall itunes. I get the message that it was not installed correctly. I HAVE DONE A SYSTEM RESTORE, I HAVE TRIED TO REINSTALL SEVERAL TIMES ALSO. I get a error message that it's "Windows error 126". Also get "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
Help!Click here and follow the instructions.
(98993) -
Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2 -
When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.
Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates -
Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?
i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings -
Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.
I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Apparently a recent update did not install correctly and we get a message: Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start systen services, How do we fix this?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
itune will not install correctly on my PC Error message reads "service 'apple mobile device' failed to start
Hello cynthialane,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best of luck,
Mario -
I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?
First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz -
A recent update download upset my entire itunes program. Unable to use to sync iphone, ipad, etc nor run any other updates. Get runtime error message, Error 7 (windows error 1114) etc...and contact app support team. Says itunes not installed correctly, pls reinstall. tried to no avail.
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Accounting Document Creation in FB60 with Tax Calculation Enable
Hello everyone, I am currently facing a strange issue. The issue is that I am using transaction FB60 to create an accounting document. How I proceed with: 1. Go to FB60 2. Enter the necessary details 3. Click on the "Save" button to post
-
Clearing Vendor and Customer through F.13
Hi. I was wondering if you can configure the vendor and customer masters so that they can be cleared automatically through transaction F.13. Currently this process is done through either F-32 or F-44 but this takes a lot of time. I would like to know
-
My iPad is locked and shows that Please connect iTunes since iPad has been stopped to be used. How to unlock it?
-
I have some shots that have been tagged with incorrect GPS data, and imported to LR. Is there a way to clear this data in LR's database? Micke
-
while I am creating dataguard on solaris 10 by oracle 11g I need to create standby database manually. but I face problem that I could not create Oracle Instance by oradim. so can anybody tell me how to create the instance on solaris. thank you