Message not passed to Business Process Engine

Hi,
I have a simple test scenario:
File --> Integration Process --> File
The process only has a reveive and a send step and sends the message further using the File adapter (this is just for testing purpose and no real-life scenario).
This works correctly until the message needs to be passed to the Business Process - in message monitoring I can see that the receiver and interface determination worked successfully and that the message needs to be passed to the Integration Process and that's it. No active process, no obvious error message...
Any hints what I could do to analyze what's happening? Where can I find more information on what the problem could be (any additional logs, monitoring, etc.)? What can go wrong when a message is passed from the Integration Engine to the BPE?
Thanks for your help,
regards,
Peter

OK Im trying to understand you....
Your saying that it works correctly until the BPM...
Well this is not possible as the first step would be the sending from the source Business system to the Integration Process so in essence you would have not done anything....
Basically the flow is Comm channel to Pipeline which then sends to BPM which then sends back to the pipeline and to the target system. So in SXMB Moni no receiver would of been foun if you are saying that it doesn't get to the BPM....
Maybe im not understanding properly....
In fact now that I think about it... Have you specified the message in BPM... (Abstract Interface etc)
Message was edited by:
        Alex Ong

Similar Messages

  • Error Business Process Engine

    Good afternoon, first of all thank you very much for the support they can provide. I have developed a JDBC interface -> BPM (Multimapping) which works well. Modify a Message Mapping in the BPM that I use for an RFC Lookup, I have added the Configurable Parameters in the BPM and Integration Directory and everything works fine at design time. But when running the interface at run time the message reaches the BPM and the error "error in BPE inbound Permanent processing".
    I have reviewed the Business Process Engine in the RWB and the item is Red Schedule Background Job for Reorganization and detail reads: "Background Job for Reorganization = Not Scheduled".
    As I can solve this problem. Thank you very much.

    Hello,
    Please go to trx SWF_XI_CUSTOMIZING and check if all nodes are green.
    You can run the Automatic Customizing there to schedule the job for reorganization.
    Kind regards,
    Sarah

  • RED the flag of the Business Process Engine

    Hello!:
    If we access "http://srvprubpoem:50200/rwb",
    Component Monitoring-Components- the option Business Process Engine is in RED. There is an "JCO request failed".
    Otherwise, if we execute transaction SWF_XI_CUSTOMIZING (to see the problems), there is one DUMP with the text "CHECK_FAILED".
    The transaction SWF_XI_CUSTOMIZING calls the transaction SWFC using the variable SWF_XI_BPM, and here is the other problem.
    Do you know the problem?
    Thanks.

    Hi Alfredo,
    Check out SAP note 1052604 - <i>RAISE_EXCEPTION in CHECK_FAILED exception</i>. It seems to give the solution (either a correction or installation of SP13).
    Regards,
    Thorsten

  • Business Process Engine is showing Red Led in RWB

    Hello to All,       I installed PI7.1 and after client copy - Business Process Engine is showing Red Led in RWB. 
    When I click on BPE, the message at bottom of screen (in Yellow Status) indicates " Schedule background job for clearing report".  Please let me know if any one has the solution with details.
    I gone thru the link in SDN, but no resolution yet.
    Re: Business Process Engine is  showing Red Led in RWB
    thanks, Srini

    Hi Mark,  All the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
    In RWB, component monitoring --> Display -- Business process engine is RED with message as
    "Schedule background job for clearing report" in Yellow.
    I looked under batch jobs "SWWCLEAR" and it is already ran successfully.
    Please let me know how can i make BPE green.
    thanks, Srini
    Edited by: Srinivas Chatrati on Apr 20, 2009 11:51 PM

  • Business Process Engine Error and Adapor Monitor JPR error in PI 7.0 Server

    Hello,
    I have installed PI7.0 Server on windows server. When I use SXMB_IFR tcode I got RWB screen and RWB Business Process Engine is in red. though I have configured automatic workflow customizing through SWF_XI_CUSTOMIZING tcode. Still i am getting BPE is showing Red.
    The Second Error :
    Adaptor Monitor area also I am getting JPR is in Red .
    Could some one please help me what to done on my PI server and how to fix?
    Regards,
    Sankaranarayanan.G
    SapBasisConsultant.

    Hello,
    Thanks for your reply. http://XIHost:Port/ProxyServer/jprselftest   this url what is the Proxy server? Here I am accessing net through some script.  I have maintained Business system also.
    What to be done? SLD is working fine..
    Regards,
    Sankaranarayanan.G
    SAP BASIS CONSULTANT.

  • BPE adapter : message not used by any process

    hi frnds,
    I've created 2 scenarios using BPM
    1) merge scenario: 2 msgs ==> BPM ==> 1 msg
    1st msg is going without any problem. but 2nd msg is giving error saying 'BPE ADAPTER ERROR: message not used by any process'. i checked in sxi_cache and found that return code for Intg'n process is 0 only. but still i tried reactivating. but no use
    2) split scenario: 1 msg ==> BPM ==> 2 msgs
    sender msg is going without any problem,but not receiving 2 rcvr msgs to the target directory. return code of IP is 0 and no other errors.
    after installing PI on my system, for the first time i'm trying BPM scenarios. simple file to file working properly. BPE adapter has to be activated manually or i missed any initial configuration??? pls help me to resolve this.
    thanks.

    abhishek,
    I have used the following steps in BPM for this scenario xml file ==> BPM ==>xml file
    1) data types: a)send_dt
                            b) rcv_dt
    2) msg types  a) send_mt
                            b)rcv_mt
    3) interfaces   : send_ob_im
                              send_abs_im
                              rcv_abs_im
                              rcv_ib_im
    in integration process,
    start ==> receive ==> send ==> stop
    so in general its like,
    send CC ==> send OB I/F ==> send ABS I/F ==> rcv ABS I/F ==> rcv IB I/F ==> rcv CC
    when i'm not using BPM, outbound queue SMQ1 is empty and messages are not stickking up there. but if i use BPM, SMQ1 is having entry saying 'SYSFAIL'. for the first time i'm doing  the BPM scenarios.
    thanks.

  • Business Process Engine in yellow status

    Hi all,
    I visit the site http://<hostname>:<port>/rep/start/index.jsp and visit the runtime workbench link. Displaying all in the component monitoring, i saw that the business process engine under Integration Server is in yellow status. I checked the details and found out there are three background jobs that weren't schedule. But i dont know the specifics of these background jobs. It says in the details
    -schedule background job for missed deadlines
    -schedule background job for worked items with errors and
    -schedule background job for deadline monitoring
    I hope you can give me a detailed procedure in scheduling these jobs.
    Warm Regards,
    Charm

    Hi,
    these jobs are to run to ensure that the approvers of the documents are informed about thier pending workitems which need to be approved.
    you can use the transaction 'SM36' for scheduling the jobs, you can find number of jobs which might already be scheduled in your system .
    for example
    jobs for 1 ) CLEAN_REQREQ_UP
               2) BBP_GET_STATUS_2

  • Business Process Engine error in component monitoring

    Hello,
    i installed a new version of XI.
    when i check the component monitor whit browser i see that Business Process Engine element have RED led.
    If i look the details, then i have the follow element whit yellow status:
    Maintain Prefix Numbers
    Configure RFC Destination
    Schedule Background Job for Missed Deadline     
    Schedule Background Job for Work Items with Errors
    Schedule Background Job for Event Queue
    Schedule background job for clearing repor
    something during configuration?
    thanks for suggestions

    Hi,
    first thing you should try is:
    1. Start transaction SWU3.
    2. Use the button u201CAutomatic workflow customizingu201D
    it's explained [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10bcbd65-64ea-2a10-9a8d-b653b8e0843c] .
    Regards
    Patrick

  • Error: BPE_ADAPTER Message not used in any process

    Please help me fix this error.
    My scenario is i have a bpm process for merging three files.
    and i configured in this way..
    merge the three files into one and send into SAP
    i have three communication channels (file adapter) for three files
    one communication channel xi adapter for a proxy into sap.
    using these files as input to BPM process
    then using BPM process as sender to the proxy reciever
    I am getting error from sxmb_moni in xi box
    as error category:BPE_ADAPTER
    error id: message_not_used.
    it says message not used in any process.
    please help me correct this problem..
    thanks
    jp

    JP,
    Are u sure there is nothing wrong in your design part? Also Are u using Fork to receive 3 files parallely, If yes then all the 3 files has been checked for start process? Can u confirm this.
    Also in the Inerface determinations did u gave abstract interfaces that BPM is recieving?
    Best regards,
    raj.

  • Business process engine, Integration engine, and Adapter engine

    can you differentiate Business process engine(BPE), Integration engine (IE), and Adapter engine

    hi,
    sure we can
    but so can you - just type each of those in google
    and you will find:
    1. short
    2. long
    descriptions of all those
    in google type also site:sap.com at the end
    this will help you much more then our replies
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Business process engine

    Hi,
    Is the Business Process engine same as the workflow engine in BPM

    hi ,
    The administration of the Business Process Management scenario comprises the administration of cross-processes (integration processes) and of process that are embedded in SAP applications (Business Workflows).
    The Business Process Engine (BPE) processes integration processes at runtime. Since the BPE uses functions of the Workflow Engine and generates workflows from integration processes at runtime, you must customize the Workflow Engine automatically by using transaction SWF_XI_CUSTOMIZING before you can use the BPE.
    i hope this answers ur query.
    Regards,
    Saujanya

  • Is the XI Business Process Engine similar to R/3 Workflow Engine ?

    Is the XI Business Process Engine related to the SAP R/3 workflow engine ?  I can see similar terminology like Container operation between the two workflow depictions.
    -Manish

    Hi Manish,
    the BPM engine is exactly the Workflow engine included in the WAS installation of XI.
    You can see that a BPM saved and activated generate a workflow template (don't touch it!).
    You'll discover that the monitors of BPM are the tipical transaction of SAP workflow.
    Regards,
    Sergio

  • How one can define Bus. Process Modeling(BPM) and Business Process Engine

    Hi,
    How one can define BPM and BPE in simple terms?
    it would be great if once can give practical example.
    thank you,
    cg

    hi,
    I would compare these with java.
    Eclipse-->Business Process Editor
    Java Code(Business logic) --> Business Process (BPM)
    Java Compiler --> Buisness process Engine
    Regards,
    Siva Maranani.

  • My windows software did not pass genuine validation process. how can i validate it?

    am using windows xp and there is an alert that my computer might be at risk because my software did pass genuine validation process. how can i help this?

    hello, this is a support forum for the mozilla firefox web-browser. we cannot help you with any problems regarding the validatiobn of your windows copy. please contact the microsoft support channels mentioned in the alert...
    a not related issue that also needs your attentions: from the system details that you've submitted it appears as you are using a very outdated version of firefox - there are [http://www.mozilla.org/security/known-vulnerabilities/firefox.html dozens of very critical security vulnerabilities] in firefox 5. please update to the latest firefox version 13 as soon as possible & also do a check of your plugins.
    www.getfirefox.com
    https://www.mozilla.org/plugincheck/

  • Message are sending from Business Process take a lot of time

    Hallo,
    in my BP there is the problem that the sending takes a lot of time. I see for example that mapping are not going. How can find the problem; the queues are empty. This seams a generell problem because all processes are effected.
    Thanks in advance,
    Frank

    Frank,
    Can ou give more details?
    Are you using a BPM? What are the steps in the BPM? What is the step that is taking a lot of time etc?
    Meanwhile, this tuning guide will prove handy,
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad">SAP Exchange Infrastructure Tuning Guide XI 3.0</a>
    Regards
    Bhavesh

Maybe you are looking for

  • Need help migrating 2006 Macbook Pro to 2012 Macbook Pro

    Hi -- The screen on my 2006 Macbook Pro (running 10.9.2) completely stopped working last weekend. It doesn't light up at all. I've tried everything under the sun to get it functioning again but I believe it is just totally dead. I tried plugging an e

  • ITunes restricts NOT OWNED songs

    iTunes has taken over a number of songs I have recorded or burned from owned CDs, which WERE NOT PURCHASED FROM iTUNES STORE... some, in fact, that were burned from owned CDs prior to the invention of iTunes. Seems, if it can "find" the song title, i

  • How to add column in Worklist app?

    Isn't it possible to add an extra column to the worklist (Mytasks view)? Rgds, Henrik

  • Music stopped playing during slideshow

    My slideshow was previously working fine. Playlist I selected would play no probelm with each slideshow. Have played them numerous times. Now suddenly the music will not play. Slideshow runs fine, Play music box is checked, correct playlist is chosen

  • Scroll between plots on a graph, while VI runs

    Hi, While running a VI, the graph is totally inactive. I would like to see the different plots, so I would like to scroll between plots, while the VI is running. Is there any possibility to do that? Thanks, Ussr123