Message not reaching to XI

Hello ,
I have configured a scenario Http ->XI->Idoc.
when I test this scenario using runtime workbench test tool,it gives me message sent , but message is not available in SXMB_moni.
message is not struck in SMQ2.
Pl can you suggest on this.
thanks,
Sharada

Hello Matias,Udo,Prateek,
Letter case are correct.
This is the url of Intergration Engine used for testing.
http://WCSPIDEV1:8051/sap/xi/engine?type=entry
There cannot be entry at SM58 as message is not reaching to IE from http request.
Pl can you suugest.
thanks,
Sharada

Similar Messages

  • FTP Sender - Message not reaching XI

    Hi,
    I am using FTP sender adapter to send an XML file to XI.
    The file is being picked up by XI properly from the Source directory on the FTP server which is running on my local machine but it is not reaching the integration server. SXMB_MONI shows no message.
    I have checked all the parameters in the communication channel and am sure that the fule is picked up. Alternatively, I am able to put a file on the FTP server. So the FTP server seems to be working fine.
    If any of you have any idea of where the error could lie, could you please respond.
    Kind Regards,
    Dhananjay

    Hi Dhananjay,
    try setting the file adapter to Delete mode
    this way you'll know if your file got picked from the FTP
    if you're sure that is was picked then:
    http://xiserver:port/MessagingSystem/monitor/monitor.jsp
    here you'll find your message if it reached Adapter Framework (file/ftp adapter)
    also remember to always check this address:
    http://xiserver:port/mdt/amtServlet
    Regards,
    michal

  • Sent messages not reaching destination

    Mail sent through .mac account does not reach destination, but everything looks completely normal. Messages sent using mail but from another mail account reach their destinations just fine. I still have tons of space on my .mac mail account and absolutely no error messages are appearing. Most grateful if anyone has a clue about what's going on.
    Thanks, SP

    hi jim, thanks for the reply.
    yes, i tried sending mail to myself, also at a yahoo acct... it seems to be sent (doesn't bounce) but never reaches destination. The only way i can make it work is not to use mac.com as my outgoing server (i have to use the server of my local provider) and not to activate ssl sockets in mail preferences... naturally no pw check etc.
    the annoying thing is that Mail doesn't tell me when it's not working, it saves the messages as sent but doesn't deliver them.
    any ideas?
    thanks again, sp

  • ABAP Client proxy message not reaching AAE

    Hi Experts,
    I am facing a strange issue in one of my proxy interfaces. ABAP client Proxy is used to post message to AAE in SAP PI 7.3. The messages are being generated and pushed out of ECC successfully. I can see them in the SXMB_MONI t-code with checkered flag. These messages are reaching the Integartion Engine instaed of the Adapter Engine.
    I have configured the following:
    1. Sender / Receiver ID  in SXMSIF:
    2. Configured the corresponding Runtime parameter in SXMB_ADM
    I have few other such ABAp client proxy i/f's which work fine and their message are being sent to the Adapter engine. Howveere, only this one interface is posing a problem. What can be the issue?
    Please advice.
    Thanks in advance.
    Elizabeth.

    Hi Elizabeth,
    It will be great if you could please let me know all the user profile configured in userID of Logon&Security tab of SM59 for connecting ECC system to post the message via AAE.
    I have used
    SAP_XI_APPL_SERV_USER
    SAP_XI_DEVELOPER_J2EE and
    SAP_XI_IS_SERV_USER
    profiles in my UserID for Basic authentication.
    Currently I am doing the same scenario what you have done with integrated configuration.The message is getting failed in ECC with 403 Forbidden error.
    Please help me.
    Thanks
    Ray...

  • HTTP receiver adapter : message not reaching partner

    Hi,
    Scenario: IDOC -> PI7.0 -> HTTP
    Idoc has to be routed after mapping to XML message to partner via HTTP post.
    Partner says, he has not received any message from PI.I can see successful status in SXMB_MONI. As HTTP adapter is not part of adapter framework, so I can not see message under Adapter engine in RWB, Right?
    Outbound message has DTD reference, is this should cause any problems?
    One more thing, under sxmb_moni, under trace I can see message
    "HTTP code:200, Ok".
    How can I ensure that PI has sent successfully message to partner.
    Please note that for HTTP adapter configuration: I have created HTTP destination on XI system with URL, service number and path prefix. It is successful.
    Best Regards,
    Divyesh

    For the already executed scenario, there is nothing much you can do now. sxmb_moni is the last point for monitoring the http related call. For the traces you may check transaction sicf
    http://help.sap.com/saphelp_nw04/Helpdata/EN/80/b2dd3a6dac703be10000000a11405a/content.htm
    You may use TCPGateway to trace further calls.
    /people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway
    Regards,
    Prateek

  • Client proxy message not reaching to XI system

    Hi
    I have done one scenario from CRM to FILE. When i am executing the client proxy through my zprogram its executing without any errors. I have checked in SXMB_MONI of CRD system i can see the messages but they are not with successful flag or not with error flag. But in XI system (SXMB_MONI) i didnt find any messages. Could you please tell me what's the problem is?
    Regards
    Sowmya

    Sowmya,
    As you are not getting any message in SXMB_MONI, there can be following possibilities:
    1. There can be some problem in proxy configuration on your CRM system. Please check with your BASIS team that steps give in this blog are properly followed:
    How do you activate ABAP Proxies? 
    2. Make sure that in
    SXMB_ADM     --->integration engine config -
    >change specific attributes....
    The RUNTIME parameter is defined LOGGING and TRACE_LEVEL and the value is 1.
    3. Make sure the queues are registered in Tx: SMQR.
    Further, I do not think that COMMIT statement or anything like that is missing as in that case you should have got a message in SXMB_MONI with a green flag stating that "Commit statement is missing".

  • Voice Mail Messages not reaching e-mail boxes

    I have an Exchange 2010 server and a Panasonic phone system with voice mail. Until recently my users could transfer voice mail messages to their e-mail as an attached WAV file.  I have not made any significant changes that should affect this functionality.
    I worked with a voice system technician who verified that the messages are being created and sent by the VM System. However, they are no longer being delivered to the users e-mail box.
    I checked to make sure that the password is correct for the mail account, I have white listed the voicemail system in the Exchange Server, and I have tested e-mail to and from the special e-mail account established for this purpose and all seem to work correctly. 
    I am wondering if there is some new security requirement or SPAM filter in Exchange which might be getting in the way. 

    See:
    http://technet.microsoft.com/en-us/library/bb124531(v=exchg.141).aspx
    By default, the Receive connector protocol log files are located at C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\ProtocolLog\SmtpReceive, and the Send connector protocol log files are located at C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\ProtocolLog\SmtpSend.
    The directory must be local to the Exchange 2010 computer.
    If Exchange received the message, you can also check message tracking on the Exchange Server.
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Message not  processed after technical routing

    Hi ,
    I have a SOAP ->ABAP Proxy (R/3) scenario that sometimes not processed completely. When checking the message in SXMB_MONI I notice a grey dot (which means log version) in the status column next to the message,  Upon opening the message I can't see any errors.
    The message has gone through the following steps.
    Inbound Message
    Receiver Identification
    Interface Determination
    Message Branch According to Receiver List
    Request Message Mapping
    Technical Routing
    But final stage call adapter not executed so i came to know that response message not reached to XI.
    This is occuring once or twice for every 25 to 30  messages.
    Can any one provide some suggestions to rectify the above issue.
    Thanks & Regards,
    Arun.

    Check out the below things,
    1. Check for which input data it is giving. (Any specific data).
    2. This may happen becaus of time out. (Huge data processing)
    Also check out below link,
    ['Log Version' status in 'SXMB_MONI']
    Resend the message from sender and it will work properly.
    Log version means "Waiting for response" and liable to fail if response not received on time.
    Edited by: Siddhesh Pathak on May 13, 2009 12:10 PM

  • The message is not reaching the outgoing communication channel

    hi forum help..............
    i have a IDOC-XI--JDBC scenario...
    my xi receives an idoc from a sap ecc.....does a simple mapping to a jdbc structuuure and then writes to a databse....
    it was working fine..... but now i had to change the JDBC adapter configuration..means in the integration builder(configuration).. i changed the name of my database server.....
    now after making that change ....... the message is not reaching the outgoing communication channel....
    i cant see any error in the sxmb_moni....
    but there is no log for the message processing in the communication channel in the RWB............

    hi,
    Is the Database is running on the same server  and the same tables and all are existed with same structure.
    Database name is changed then you would have to check all . and after changes , did you activated ?
    If every thing is correct, then refresh Cache.
    For cache related see the below links
    /people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
    XI Runtime cache error: Cache contents are obsolete
    Cache Refresh - SAI_CACHE_REFRESH
    /people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
    Regards
    Chilla

  • Messages are not reaching to Adapter Engine (JMS receiver)

    Hi Friends,
    We have one scenario running on Production env.
    Scenario is: R3(IDOC) -> XI ->JMS Provider
    IDOC to JMS.
    Sometime we found messsages are successful in SXMB_MONI, but those messages entries are not found under AE.
    Means they are not reaching to JMS.
    Communication channel is green, without any error.
    This happens sometime only, and no changes have been done to JMS adapter parameters.
    What might have happen to these messages, which are successful in MONI but not visible under AE.(Even not in Archived option)?
    I searched on SDN, but most of the questions are unanswered.
    Please let me know your inputs.
    Divyesh Vasani

    Hi Divyesh,
    check under message monitoring in RWB
    if u r not finding the message there , those might be archived.
    did u confirm with the destination system .. if they got the messages?
    if at all messages are stuch in AE ... and if u search the correct message u should be able to see the message.
    if the Integration engine unable to put messages in AE , then in some pipeline step in MONI it will show error

  • BC CASE:: File not Reaching XI to BW System even message is success in MONI

    Hi! Gurus,
    This is Amar Srinivas Eli. Here I am facing one important issue. we are transferring data from SAP XI --> BW System via RFC's through FTP Server using Sender File(FTP) to receiver RFC Module.
    <b>
    But issue is we are able to send messages from XI but that particular files not reaching to BW system
    Here we checked the below following:: </b>
    1.SXMB_MONI::  Success Message its Showing success status and Black and White FLag is obtained and is reflecting every time success from XI SIde
    2. SMQ1 & SMQ2  :: No Messages in both the queues.
    3. We checked RFC COnnections ::
    every thing is fine and all are active.
    4. Communication Channel Monitoring::
    Both Sender as well as Receiver CC are showing Status Green and Error Free
    5. I checked with BASIS Trace on my User ID:
    in that analysis every thing is fine means no red colour error.
    NOte:: This Scenario is become Success only once if the XI server is restarted once then the file is reaching BW system in remaining cases one day File is picking successfully and another day file is not even picking.
    WHY THIS UNEVEN IN SERVER AND tell me if there is any mistake or else any issue with RFC or Still I need to do any thing from my part as a XI Developer,.
    Kindly answer it as it is a BC Case.
    THanks
    Amar Srinivas Eli

    Hi! Vijay,
    I already mentioned that I have chcked even in SXMB_MONI as well as SMQ1 and SMQ2.
    1. In MONI If you placing a file in FTP server it was picking from FTP Server and is howing success message in MONI (Blacka nd White Flag)
    2. I also checked in Both the queues SMq1 and Smq2no messages and no queues are remained in Queues
    3. Even I checked CC Channel Monitoring
    both sender and receiver Cc's are Green and Error free.So
    So,Please provide any other solution for why it was not reaching to BW system even though All RFC Connections are fine and acitive.
    Thanks
    Amar Srinivas

  • HT5312 algokar Dec 26, 2013 2:11 AM Forgot Answer Questions safety tried to re-send a lot of email did not reach any messages to re-ask safety   I can not buy any program that I forgot to ask him answer safety   Please help and send me a re-liquefaction a

    Forgot Answer Questions safety tried to re-send a lot of email did not reach any messages to re-ask safety
    I can not buy any program that I forgot to ask him answer safety
    Please help and send me a re-liquefaction answer to the same email

    1)  Apple ID: All about Apple ID security questions
    If necessary
    2)  See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    3)  Or Email Here  >  Apple  Support  iTunes Store  Contact

  • ERROR       partner 'localhost:sapgw00' not reached

    Hi,
    i have BI system with portal. when i am trying to connetct portal with url http://<hostnaem>/<ip>:<portnumber>/irj/portal ---it is displaying as 500 internel server error with java.lang.NullPointerException: null .
    i am keeping  here two logfiles 1.dev_jrfc.trc 2.defaulttrace.trc here under for your reference.
    1..dev_jrfc.trc  --log
    Error> occured  >Tue Feb 17 04:52:46,483<
    RfcException:
        message: Connect to SAP gateway failed
    Connect_PM  TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR       partner 'localhost:sapgw00' not reached
    TIME        Tue Feb 17 04:52:46 2009
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2513
    DETAIL      NiPConnect
    SYSTEM CALL connect
    ERRNO       146
    ERRNO TEXT  Connection refused
    COUNTER     10
        Return code: RFC_FAILURE(1)
        error group: 102
        key: RFC_ERROR_COMMUNICATION
    Error> occured  >Tue Feb 17 04:52:46,503<
    RfcException:
        message: Connect to SAP gateway failed
    Connect_PM  TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR       partner 'localhost:sapgw00' not reached
    TIME        Tue Feb 17 04:52:46 2009
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2513
    DETAIL      NiPConnect
    SYSTEM CALL connect
    ERRNO       146
    ERRNO TEXT  Connection refused
    COUNTER     12
        Return code: RFC_FAILURE(1)
        error group: 102
        key: RFC_ERROR_COMMUNICATION
    2.DefaultTrace.trc --log
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[1.5.3.7185 - 630]/>
    <!NAME[./log/defaultTrace.trc]/>
    <!PATTERN[defaultTrace.trc]/>
    <!FORMATTER[com.sap.tc.logging.ListFormatter]/>
    <!ENCODING[UTF8]/>
    <!FILESET[14, 20, 10485760]/>
    <!PREVIOUSFILE[defaultTrace.13.trc]/>
    <!NEXTFILE[defaultTrace.15.trc]/>
    <!LOGHEADER[END]/>
    #1.5 #00144FAC097C006C000000550000723800045E43F3A75D87#1229545850494#com.sap.engine.services.security#sap.com/tcjetrace~app#com.sap.engine.services.security#J2EE_GUEST#0##n/a##2f24ad50cc6c11dd974500144fac097c#SAPEngine_Application_Thread[impl:3]_9##0#0#Error#1#/System/Security#Java#security_3031##Cannot get run_as identity for the security role "admnistrator".#1#admnistrator#
    #1.5 #00144FAC097C006C000000560000723800045E43F3A776EC#1229545850500#com.sap.engine.services.security#sap.com/tcjetrace~app#com.sap.engine.services.security#J2EE_GUEST#0##n/a##2f24ad50cc6c11dd974500144fac097c#SAPEngine_Application_Thread[impl:3]_9##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.security.exceptions.BaseSecurityException: Cannot get run_as identity for the security role "admnistrator".
         at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getRunAsIdentity(SecurityRoleContextImpl.java:662)
         at com.sap.engine.services.security.roles.SecurityRoleReference.getRunAsIdentity(SecurityRoleReference.java:183)
         at com.sap.engine.services.servlets_jsp.server.runtime.context.SessionServletContext.getSubject(SessionServletContext.java:598)
         at com.sap.engine.services.servlets_jsp.server.runtime.context.ApplicationContext.getSubject(ApplicationContext.java:893)
         at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.destroyServlets(WebComponents.java:720)
         at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadDestroyer.run(ApplicationThreadDestroyer.java:62)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.security.api.PrincipalNotAccessibleException: Connect to SAP gateway failed
    Connect_PM  TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR       partner 'localhost:sapgw00' not reached
    TIME        Wed Dec 17 15:30:50 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2513
    DETAIL      NiPConnect
    SYSTEM CALL connect
    ERRNO       146
    ERRNO TEXT  Connection refused
    COUNTER     16
         at com.sap.security.core.imp.AbstractPrincipal.getPrincipalDatabagValues(AbstractPrincipal.java:1787)
         at com.sap.security.core.imp.Principal.setDirectChildrenInternal(Principal.java:501)
         at com.sap.security.core.imp.AbstractPrincipalSet.getUserMembersInternal(AbstractPrincipalSet.java:393)
         at com.sap.security.core.imp.AbstractPrincipalSet.getUserMembers(AbstractPrincipalSet.java:210)
         at com.sap.security.core.imp.AbstractPrincipalSet.getUserMembers(AbstractPrincipalSet.java:129)
         at com.sap.security.core.imp.GroupWrapper.getUserMembers(GroupWrapper.java:29)
         at com.sap.security.core.server.userstore.GroupInfoUME.engineGetUsersInGroup(GroupInfoUME.java:181)
         at com.sap.security.core.server.userstore.GroupContextUME.engineGetUsersOfGroup(GroupContextUME.java:379)
         at com.sap.engine.services.security.userstore.context.GroupContext.getUsersOfGroup(GroupContext.java:191)
         at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getUserFromGroup(SecurityRoleContextImpl.java:775)
         at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getUserFromRole(SecurityRoleContextImpl.java:763)
         at com.sap.engine.services.security.roles.SecurityRoleContextImpl.generateValidRunAsPrincipal(SecurityRoleContextImpl.java:719)
         at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getRunAsIdentity(SecurityRoleContextImpl.java:610)
         ... 9 more
    #1.5 #002128049C66006D00000049000023EF0004631BF918D17E#1234871701262#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#J2EE_GUEST#0##n/a##ce792bd0fce911dda3de002128049c66#SAPEngine_Application_Thread[impl:3]_12##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The error is: java.lang.NullPointerException
         at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    #1.5 #002128049C66006D0000004B000023EF0004631BF918E565#1234871701267#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_GUEST#0##n/a##ce792bd0fce911dda3de002128049c66#SAPEngine_Application_Thread[impl:3]_12##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error.
    The error is: java.lang.NullPointerException: null
    Exception id: [002128049C66006D00000049000023EF0004631BF918D17E]#
    #1.5 #002128049C66007200000033000023EF0004631BFBCDBE0A#1234871746674#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#J2EE_GUEST#0##n/a##e98aa520fce911ddb1ff002128049c66#SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The error is: java.lang.NullPointerException
         at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    #1.5 #002128049C66007200000035000023EF0004631BFBCFAC76#1234871746800#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_GUEST#0##n/a##e98aa520fce911ddb1ff002128049c66#SAPEngine_Application_Thread[impl:3]_18##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error.
    The error is: java.lang.NullPointerException: null
    Exception id: [002128049C66007200000033000023EF0004631BFBCDBE0A]#
    #1.5 #002128049C66006700000026000023EF0004631DEA2AFCFF#1234880040729#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#J2EE_GUEST#0##n/a##392f0090fcfd11ddbd79002128049c66#SAPEngine_Application_Thread[impl:3]_26##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The error is: java.lang.NullPointerException
         at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    #1.5 #002128049C66006700000028000023EF0004631DEA2B0507#1234880040731#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_GUEST#0##n/a##392f0090fcfd11ddbd79002128049c66#SAPEngine_Application_Thread[impl:3]_26##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error.
    The error is: java.lang.NullPointerException: null
    Exception id: [002128049C66006700000026000023EF0004631DEA2AFCFF]#
    please help on this issue

    Hi,
    Somewhere the address is not getting resolved. I would suggest you to enter IP address instead of the hostname in the RFC (SM59).
    Hope this helps.
    Manoj Chintawar

  • Sap-nw:3300 not reached error in gateway

    Dear experts,
    I am facing a strange problem after a successful installation of netweaver Java+abap.
    when i start the server i found this error
    **** ERROR file opened at 20100131 114242 Arab Standard T, SAP-REL 700,0,113 RFC-VER 3 911150 MT-SL
    T:2844 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner 'sap-nw:3300' not reached
    TIME        Sun Jan 31 11:42:42 2010
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2770
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUNTER     1
    i ignore the error and i tried to login
    after successful login to the portal server when i access the user administration tab. the explorer show
    SAP WebAS Engine is starting...
    If this state does not change within a few minutes,
    please contact your system administrator.
    Check the recommendations in SAP Notes: 943498, 764417
    Message: Dispatcher running but no server connected!
    and the server turns to yellow again when it turns to green again
    i checked dev_rd
    Sun Jan 31 13:11:15 2010
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    *** ERROR => NiIRead: SiRecv failed for hdl 9 / sock 268
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1205) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    *** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 304
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1148) [nixxi.cpp    4424]
    ***LOG S23=> GwIDisconnectClient, client disconnected (006) [gwxxrd.c     11592]
    ***LOG S74=> GwIDisconnectClient, client disconnected ( sap-nw) [gwxxrd.c     11603]
    ***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11638]
    ***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11651]
    *  LOCATION    SAP-Gateway on host sap-nw / sapgw00
    *  ERROR       connection to partner 'sap-nw:1148' broken
    *  TIME        Sun Jan 31 13:11:15 2010
    *  RELEASE     700
    *  COMPONENT   NI (network interface)
    *  VERSION     38
    *  RC          -6
    *  MODULE      nixxi.cpp
    *  LINE        4424
    *  DETAIL      NiIRead
    *  SYSTEM CALL recv
    *  ERRNO       10054
    *  ERRNO TEXT  WSAECONNRESET: Connection reset by peer
    *  COUNTER     232
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    *** ERROR => NiIRead: SiRecv failed for hdl 10 / sock 256
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1206) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    *** ERROR => NiIRead: SiRecv failed for hdl 11 / sock 244
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1208) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    *** ERROR => NiIRead: SiRecv failed for hdl 12 / sock 232
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1207) [nixxi.cpp    4424]
    then i try to login again with the browser it give me
    Portal Runtime Error
    An exception occurred while processing your request
    Exception id: 01:27_31/01/10_6192950
    See the details for the exception ID in the log file.
    any help would be appreciated
    <br>
    i also wanted to add that telnet 3300 works fine ping to host name is ok
    my os win2003 sap 2004s sr3
    Edited by: ebrahime on Jan 31, 2010 11:37 AM

    thanks for your reply. i wanted to add 2 thing after the installation the password i entered in installation was not working  for all the super users that is why i had to delete SAP* from database and change the j2ee_Admin password.
    you mentioned that the java stack is unable to communicate with abap stack but i can login to portal by j2ee_admin user. but when i go to identity management then it give the error i gave you earlier.
    any way the dev_w0 file contents is bellow
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Tue Feb 02 10:23:01 2010
    B  create_con (con_name=R/3)
    B  Loading DB library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' ...
    B  Library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' loaded
    B  Version of 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.144)
    C  DbSl trace SM50: switch request to level 1
    B  New connection 0 created
    M sysno      00
    M sid        ENP
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    144
    M intno      20050900
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        1604
    M
    M  kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1604) [dpxxdisp.c   1305]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          25168     (1480)
    M  DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)          552080     (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1864)
    M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010E70050, size: 6348592)
    M  DpShMCreate: allocated sys_adm at 0000000010E70050
    M  DpShMCreate: allocated wp_adm at 0000000010E72150
    M  DpShMCreate: allocated tm_adm_list at 0000000010E783A0
    M  DpShMCreate: allocated tm_adm at 0000000010E78400
    M  DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
    M  DpShMCreate: allocated appc_ca_adm at 00000000113E2060
    M  DpShMCreate: allocated comm_adm at 00000000113E3FA0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000001146AC30
    M  DpShMCreate: allocated gw_adm at 000000001146ACB0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000001146ACE0
    M  DpShMCreate: allocated wall_adm at 000000001146ACF0
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Tue Feb 02 10:23:02 2010
    M  ThInit: running on host ENP
    M 
    M Tue Feb 02 10:23:03 2010
    M  calling db_connect ...
    C  Registering callback for dynamic profile parameters
    C  DB2 library successfully loaded DB2 library 'F:\usr\sap\ENP\DVEBMGS00\exe/db6_clidriver\bin\db2app64.dll' successfully loaded
    C 
    C  DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
    C 
    C  DB6 shared library (dbdb6slib) patchlevels
    C    (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
    C    (0.8) Support of SDBUPDEXCL (note 847616)
    C    (0.9) DB6: use export file for dbdb6slib (note 835135)
    C    (0.9) DB6: Core in getAndBindSQLDA (note 833183)
    C    (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
    C    (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
    C    (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
    C    (0.17) DB6: special characters in sidadm passwd (note 865839)
    C    (0.21) DB6: no SAP_INFO comments (note 873889)
    C    (0.22) DB6: hints: get correlation names from view texts (note 868888)
    C    (0.23) DB6: hints: get correlation names from view texts (note 868888)
    C    (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
    C    (0.27) DB6: activate value compression (note 886231)
    C    (0.28) DB6: optimization guidelines on views part 2 (note 868888)
    C    (0.30) DB6: no SQL trace for SQLCancel (note 892111)
    C    (0.33) DB6: append SAP_TA comment (note 873889)
    C    (0.34) DB6: activate value compression with quoted names (note 886231)
    C    (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
    C    (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
    C    (0.50) DB6: reread passwords for secondary connections (note 931742)
    C    (0.52) DB6: double quote table names in optguidelines (note 868888)
    C    (0.54) DB6: error handling in DBSL CLP (note 940260)
    C    (0.69) DB6: technical support of DB2 CLI driver (note 962892)
    C    (0.73) DB6: log table name on TRUNCATE failure (note 970743)
    C    (0.79) DB6: column type XML in index size calculation (note 982993)
    C    (0.82) DB6: CAST for SSTRING data types (note 989568)
    C    (0.86) DB6: long runtimes for R3szchk (note 1000847)
    C    (0.88) DB6: patch collection Dec 06 (note 1005574)
    C    (0.96) DB6: patch collection Jan 07 (note 1017852)
    C    (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
    C    (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
    C    (0.107) DB6: patch collection Apr 07 (note 1047194)
    C    (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
    C    (0.113) DB6: work process type in application snapshot (note 1059905)
    C    (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
    C    (0.117) DB6: patch for execution of long DDL statements (note 1069658)
    C    (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
    C    (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
    C    (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
    C    (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
    C    (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
    C    (0.128) DB6: db6_free on invalid memory area (note 1092030)
    C    (0.133) DB6: statement cache enhancements (note 1101031)
    C    (0.136) DB6: change for enhancement pack installer (note 1111536)
    C    (0.138) DB6: improoved table size estimate for DB8 V8 (note 1119934)
    C    (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
    C    (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
    C 
    C  Supported features:
    C 
    C  ..retrieving configuration parameters
    C  ..done
    C  Running with UTF-8 Unicode
    C 
    C Tue Feb 02 10:23:04 2010
    C  Running with CLI driver
    C  DB2 client driver version '09.01.0007'
    C  Connected to DB2 server type 'DB2/NT64'
    C  Connected to DB2 version '09.01.0007'
    C  Connect to 'ENP' as 'SAPENP' schema 'SAPENP' o.k.; con_hdl=0
    C  Database code page is ok.
    C  Database collating sequence is ok.
    C  DB2_WORKLOAD=SAP is set in DB2 registry as required.
    C  CLI Insert Buffering is disabled on single partition databases.
    C  DbSl trace SM50: switch request to level 1
    C  DbSlControl: returning SAPDBHOST='ENP'
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20100202 102303 ENP            
    C  DbSlControl: returning SAPDBHOST='ENP'
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Tue Feb 02 10:23:05 2010
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0000000015400050, size: 4400000)
    M  SHM_ROLL_AREA          (addr: 000007FFDDA80050, size: 268435456)
    M  SHM_PAGING_AREA          (addr: 0000000015840050, size: 134217728)
    M  SHM_ROLL_ADM               (addr: 000000001D850050, size: 2678942)
    M  SHM_PAGING_ADM          (addr: 000000001DAE0050, size: 525344)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 000000001DB70050
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12176 bytes (50 server) at 000000000AE50050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 17, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 0000000021540160, size: 30000000, end: 00000000231DC4E0)
    B  dbtbxbuf: Buffer TABLP (addr: 00000000231E0160, size: 10240000, end: 0000000023BA4160)
    B  dbexpbuf: Buffer EIBUF (addr: 0000000023BC0170, size: 4194304, end: 0000000023FC0170)
    B  dbexpbuf: Buffer ESM   (addr: 0000000023FD0170, size: 4194304, end: 00000000243D0170)
    B  dbexpbuf: Buffer CUA   (addr: 00000000243E0170, size: 3072000, end: 00000000246CE170)
    B  dbexpbuf: Buffer OTR   (addr: 00000000246D0170, size: 4194304, end: 0000000024AD0170)
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 00000000128BEA10
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 000000002DDF00D0
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 000000002DDF0610
    S    using messages for server info
    S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S  size of open spool request entry: 2272 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Locked PXA-Semaphore.
    A  System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
    A  Attached to PXA (address 000007FFEDAB0050, size 300000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A  ABAP ShmAdm attached (addr=000007FF35ED5000 leng=20955136 end=000007FF372D1000)
    A  >> Shm MMADM area (addr=000007FF363AEF10 leng=244096 end=000007FF363EA890)
    A  >> Shm MMDAT area (addr=000007FF363EB000 leng=15622144 end=000007FF372D1000)
    A  RFC Destination> destination ENP_ENP_00 host ENP system ENP systnr 0 (ENP_ENP_00)
    A  RFC Options> H=ENP,S=00,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 35354 bytes at 000000002DF60050
    N  SsfSapSecin: putenv(SECUDIR=F:\usr\sap\ENP\DVEBMGS00\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is F:\usr\sap\ENP\DVEBMGS00\exe\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...completed with return code 5.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    B    dbtran INFO (init_connection '<DEFAULT>' [DB6:700.08]):
    B     max_blocking_factor =  30,  max_in_blocking_factor      =  60,
    B     min_blocking_factor =   1,  min_in_blocking_factor      =   1,
    B     prefer_union_all    =   1,  prefer_join                 =   1,
    B     prefer_fix_blocking =   0,  prefer_in_itab_opt          =   0,
    B     convert AVG         =   1,  alias table FUPD            =   0,
    B     escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B     select *            =0x0f,  character encoding          = STD / <none>:-,
    B     use_hints           = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
    B                           rule_fae->0, concat_fae->0, concat_fae_or->0
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 700, [7000.0.144.20050900]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [16]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    N  VSI: WP init in ABAP VM completed with rc=0
    E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ENP_ENP_00
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    M 
    M Tue Feb 02 10:23:06 2010
    M  SecAudit(RsauShmInit): WP attached to existing shared memory.
    M  SecAudit(RsauShmInit): addr of SCSA........... = 000000000A960050
    M  SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000A9607C0
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000A960800
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000A96080C
    M 
    M Tue Feb 02 10:23:28 2010
    M  rdisp/rb_cleaned_rfc = 0
    A 
    A Tue Feb 02 10:23:34 2010
    A  RFC FRFC> fallback on the central gateway ENP sapgw00 activ

  • Can someone please help me figure out why I keep getting the "can not reach server" when I try to download the ebook? This is happening with Adobe Digital Editions.

    When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server".  Can someone please help me with this?
    TO be precise, it says "licensee server communication problem"
    Thank you

    The thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
    Good luck.

Maybe you are looking for