Message not seen in SXMB_MONI

Hello Experts,
We are sending MATMAS IDoc from ECC system through PI 7.1 to third party using HTTP.
When Material is sent using  transaction BD10 an IDoc gets triggered and is visible in transaction WE02 in green status.The Port used to send the IDoc data is the same that is configured in the Partner Profile for the PI system.
But the corresponding message is not visible in SXMB_MONI of PI.
Please help!
Thanks in advance,
Suraj

Hello Prateek,
Yes it is showing stuck in SM58 with status '::000'
If we see the help of status it shows "Field contents that were used for the placeholders in the statement MESSAGE."
We cannot understand what this status means or how to resolve it.
Please help!
Regards,
Suraj

Similar Messages

  • Sender RFC Message not seen in sxmb_moni

    Hi,
    Uptill now i must have created 9 RFC To file scenarios ..all of them are working perfectly.
    But this tenth one is bugging me up:
    Problem:
    1. I created RFC destination which is working perfectly fine i.e connection test is successful.
    2. When i run the program the function module gets executed successfully, but i dont see any messages in sxmb_moni .In RWB inside communication channel monitoring  I can just see is processing started and nothing else for that communication channel.. Whereas for other 9 CCs i can see processing started
    & Message processed successfully messages properly..
    Any help will be appreciated & points will be rewarded.

    Hello,
    can you have a look at this weblog:
    /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
    it's a how to turn on the traces - Logging on the XI
    This will help you...
    ************Reward points,if found useful

  • RFC to File scenario.. Messages not available in sxmb_moni

    Hi Experts,
    I have created simple RFC to File scenario in my sandbox system.  First time I am doing this type of scenario.
    When I execute the program which is created to call the RFC Function Module nothing is coming into sxmb_moni in sap system as well as in PI system.  I don't know why messages is not coming to sxmb_moni.
    Please suggest me how to resolve this issue.
    Thanks & Regards,
    Satish Kumar P.

    Hi Satish,
    first monitor  Sender RFC channel in communciation channel monitroing ,after executing program in ECC if BAPI triggered then definely you will see log in RFC sender channel.
    if nothing was found then prob in ECC side like Pogram triggered BAPI.
    Regards,
    Raj

  • Messages Not Visible in SXMB_MONI

    Dear All,
    Now i am doing one file to file scenerio. The file is getting deleted from the source directory but not reaching the target directory. Also, when i am seeing in  SXMB_MONI, there is no messages in that. And in the Adapter Monitoring, Source Adapter(File) is specifying that one message is processed but Target Adapter(File) is telling that "no message processing until now".
    Please help me to solve this problem.
    thanks in advance.
    nishu

    Hi Nishu,
      Go to Runtime Work Bench(RWB) and select Message Monitoring. There select your message by specifying the appropriate date.
    Click on the message details to get a detailed view of what happened to your message.
    Send us the msg details for  more help.
    Regards,
    Jai Shankar.

  • Messages not appearing in SXMB_MONI

    Hi All
    I am working on SOAP Sender and RFC Receiver scenorio.
    I did all the configurations in the XI and tested the same using Altova XML Spy tool.
    It is working fine and the data is also getting posted in SAP.
    But i am not able to see the processed XML messages using SXMB_MONI.
    Can you pls help on this
    Regards
    Madhan D

    Hi,
    Goto SXMB_ADMIN->Integration engine configuration-Specific parameters and select RUNTIME-->logging_sync to 1 by default it is 0.
    Thanks!

  • Message Not comming into SXMB_MONI

    Hi Friends,
    I am doing File - idoc Scenario.
    My Sender File adatper is picking source file successfully.
    But, when i see in the SXMB_MONI, message is not showing in to the   SXMB_MONI.
    when check my Communication Chennel in RWB, its showing Warning like below
    "Message Found Empty".
      Please anyone tell me what is the problem.
       Regards,
       Vijaya

    Hi Vijaya
    Please look this link.
    /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
    /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
    https://www.sdn.sap.com/irj/sdn/weblogs?
    blog=/pub/wlg/1629.
    hope this will help u ....

  • Service desk message not seen in SOLMAN

    Hi Gurus!
    We are creating a service desk message in R\3 system that should be displayed in SOLMAN. But it is not displayed in solution manager. Could you please specify what steps shouls i have to do inorder to get that message displayed.
    Thanks in Advance.
    Regards,
    Kiran

    Hi,
    did you search with the message number?
    If you still don't find it change the selection criteria in CRM_DNO_MONITOR.
    Check Destination that you have maintained in R/3 under SM30, for object BCOS_CUST.
    Provide as much as info possible when u r posting message on sdn, to get immediate positive response.
    Feel free to revert back.
    --Ragu

  • Message not showing in SXMB_MONI

    Dear All,
    I have File - XI - RFC and RFC response - XI - File.
    After i put my file in the sender folder, the status in RWB:
    - file sender adapter executed successfully.
    - file receiver adapter also executed successfully
    - RFC receiver also no problem.
    I can see my file generated in the receiver path.
    The thing is after I refresh t-code SXMB_MONI, i still can't see my messages that just processed. Any possibility why it happened?
    Best Regards,
    Victor.

    Hi Victor,
    You have to set parameter LOGGING (type runtime) in TC SXMB_ADM --> Integration Engine Configuration --> Specific Configuration.
    This will enable asynchronous messages to be displayed in sxmb_moni.
    Do the same with parameter LOGGING_SYNC in order to display synchronous messages.
    Carlos
    Edited by: Carlos Gonzalez on Oct 9, 2008 10:19 AM

  • Receiver payload not seen in sxmb_moni

    Hi experts,
    i am doing proxy to file...
    while checking sxmb_moni....i can see the source payload but unable to see the response payload..and response is in chequered flag without payload..
    file communication channel is showing green status..successfull..
    help me out how can i check  receiver pay load in sxmb_moni...help me out...

    hi kiran,
    First of all ur scenario is proxy to file means ie. abap proxy to file u want to get the data from abap to file that's it. but why ur asking for payload it will be seen only when u r using mail adapter i.e when we attach the files the payload can be seen.
    Reward points if useful,
    Regards,
    Srinivas.D

  • HELP-Incoming messages not seen in Inbox

    It seems after installing 10.6.3 a snet.net (now AT&T) mail account (POP3) stopped displaying new messages. No messages are displayed after April 2 at 10:26am. If I select "Get Mail" it tells me those messages are coming in through incoming mail but they don't show up in the inbox (In fact they keep coming in every time it "Gets Mail"--it seems to pull them down from the server over and over "73 messages received" and if I send a test email it will go up to 74). If I select "Account Info" the Account Info window appears and DOES show the messages "Messages on Server" but they never seem to make it to Apple Mails Inbox Window. My three other SNET account Pop3 Inbox/mailboxes work fine. I deleted the account and re-added it and same behavior occurs. Exact same behavior on my laptop as well! Webmail also works fine. This is my work account (of course) and I need this to function. Any help provided would be appreciated. Thank you.

    It seems after installing 10.6.3 a snet.net (now AT&T) mail account (POP3) stopped displaying new messages. No messages are displayed after April 2 at 10:26am. If I select "Get Mail" it tells me those messages are coming in through incoming mail but they don't show up in the inbox (In fact they keep coming in every time it "Gets Mail"--it seems to pull them down from the server over and over "73 messages received" and if I send a test email it will go up to 74). If I select "Account Info" the Account Info window appears and DOES show the messages "Messages on Server" but they never seem to make it to Apple Mails Inbox Window. My three other SNET account Pop3 Inbox/mailboxes work fine. I deleted the account and re-added it and same behavior occurs. Exact same behavior on my laptop as well! Webmail also works fine. This is my work account (of course) and I need this to function. Any help provided would be appreciated. Thank you.

  • HTTP messages not received by SAP PI system

    hi all,
    We are using SFDC integration , where we are receiving message using HTTP Sender CC. But these messages are not seen in sxmb_moni. How can we check if the messages are reaching SAP PI . What are the settings needed for HTTP communication in SAp pi. Please help.
    Regards,
    Vinithra

    Hello,
    You may need to turn on synch logging in ie. To do this type tcode sxmb_adm, then go to Integration Engine Configuration -> F9 (edit config) -> set LOGGING_SYNC to 1
    Hope this helps,
    Mark

  • Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found". This error message is seen when first starting Windows Vista, prior to starting Photoshop Elements 12.

    Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
    This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1 
    It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • HT2188 I just got an iPad mini, when I try to upload my iPhone backup from my Mac i get the message to upgrade my iTunes. I can not seen to find where the download link is for iPads on apple website. Can anyone help?

    I just got an iPad mini, when I try to upload my iPhone backup from my Mac i get the message to upgrade my iTunes. I can not seen to find where the download link is for iPads on apple website. Can anyone help?

    The message is referring to iTunes on your computer, not the iPad : http://www.apple.com/itunes/download/
    The built-in apps on the iPad can only be updated via iOS updates, so if your iPad mini is on iOS 6.0.2 then its up-to-date

  • SXMB_MONI : Error in Persistence Layer : XML Message Not Found

    Hi Team,
    There are some messages in our Production system and is in Scheduled state in SXMB_MONI and when we try to re-process those messages, we are getting message : Error in Persistence Layer and when we double click on message, we are getting the error : XML Message Not Found.
    Any help on this is highly appreciated.
    Thanks & Regards,
    C V Jayachandra

    Hi,
    Please refer the below discussion
    SXMB_MONI - Error accessing persistence layer
    regards,
    Harish

  • Message sent from RWB but not reflected in SXMB_MONI

    Hello Experts,
    I have a SOAP - RFC synchronous scenario. I am sending a message from RWB to PI system.It shows message sent in RWB and the message details are reflected in the RWB->message monitoring ->Adapter Engine as 'Successfull'. But no in RWB->message monitoring->Integration Engine.
    The message does not reflect in SXMB_MONI either. All other scenarios are working fine except this.
    Also on checking the status of Sender communication channels in RWB it shows 'yellow' with reason channel may be inactive or unitialised. Whereas i have checked the communiaction channels in ID, their status is Active.
    Kindly advice a solution.
    Thanks in advance,
    Elizabeth.

    Hi,
    Your message processed from sender adapter. But seems there is some problem in reaching IE. Check out your wsdl file. check when define a web service, have u given right url. Is it like this
    http://[server]:[port]/XISOAPAdapter/MessageServlet?channel=:[sender communication channel service]:[sender communication channel name]
    and also make sure whether you given the right http port name, sender business system name , sender message interface in the following step of define web service.  and the port name is important you can fine http port for your PI server by going to SMICM tcode. in that press shift + F1
    You altova xmlspy software for testing purpose. You can download free 30 day trial version from altova website. once you installed in it.
    Go to xmlspy software. the menu you can find a "SOAP". underthis menu you can find create soap request. select that it will ask the wsdl file. give the wsdl file which you are created in define web service step. after that in xmlspy
    menu->soap->send request to server. then it ill ask user name and password to connect with the PI server.  then you will get the rfc response if u successfully connected with PI sever.
    for more details,
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID1437447550DB12110496670821140257End?blog=/pub/wlg/4550
    but in this website they didnt use xmlspy some other third party software. good luck
    Regards,
    Balaji

Maybe you are looking for