Message " not taken care size (format) of image"

Hello,
I possess Aperture 3.5.1 and Mac OS X (mavericks) and plug-in Border fx, collection NIK softwave. (My camera is a Canon 6D). I use 2 Internet browser : "safari" and "chrome".
For several months, very often, when I move on miniatures, in particular after the use of Border fx, the image RAW becomes black with the message " not taken care Size(Format) of image ". I must to leave Aperture, to open him again, to open in full screen the image in error, so that it displays again.
Have you got a solution?
Thank you for your help.

A quick update - I had a 28k jpg, which when saved to the database in the dodgy format is 33k. I found if extract this and save (via ImageIO.write) to disk as a PNG, it is now apparently a 'standard' format (also loads ok in web browser), however the size is 400k! If I load that png file (using ImageIO) off disk and save back (using ImageIO), the size is 33k again and it's reverted to the broken format! How is this so?
I've found if I load the png and save as jpg, both steps with the old JIMI api, it converts back to a 28k jpg which seems to be totally ok. (We use the Jimi api for conversion of .pict files.)
Any ideas what is going on?

Similar Messages

InDesign may not support this file format message?

What do I do when I get a Adobe InDesign may not support this file format, a plug-in that supports this file format may be missing message?

Do you understand the difference between embedded (all of the image data is stored within the file) and linked (what happens when you use File > Place.... where a pointer to the file stored in the file along with a screen preview)? You must deliberately embed images -- there's no way to do it automatically. Pasted graphics are also stored internally.
As to why it no longer works? Probably a write error while saving, especially if this is saved on a network drive. Writing 9 gb takes some time, if the file was really that big and isn't cross-linked to something else.
To keep ID file sizes down always Place images and graphics rather than pasting, and do a periodic Save As to remove old change data that will become useless file bloat when you close the file. I tend to add a version suffix when doing the Save As at any major change point, rather than overwriting the original, as it gives me an automatic backup chain and a way to go back to a previous version if I need to move in a different direction.
Do you have a backup?

Urgent: SQLException: Internal Error: Image is not in 8.1 format

Hello there,
I have never come accross such error.
Scenario
1 using JDeveloper EA1, Database 9i (9.2.0.6)
2 calling Oracle package procedure with in/out parameters.
3 Package has been imported into jDeveloper (jPublisher) with defaults settings.
4 procedure call is successfull, but when accessing out value getting this error
Code
try{
// imported package
PailinWebPolicy webPolicy=new PailinWebPolicy(conn);
System.out.println("web issue policy");
// call of package procedure both parameters are in/out
webPolicy.issuepolicy(policyData,errors,processStatus);
System.out.println("web issue policy done");
result=processStatus[0];
System.out.println("result assigned policy length "+policyData.length);
Wtpolicycore resultPolicy=policyData[0];
System.out.println("policy data assigned");
// error at accessing getPolicyno
String policyRef =resultPolicy.getPolicydata().getPolicyno();
System.out.println("policy ref assigned");
catch(SQLException e)
System.out.println("Exception "+e);
System.out.println("Exception "+e.getErrorCode()+" state "+e.getSQLState());
opus.close();
output:
web issue policy
web issue policy done
result assigned policy length 1
policy data assigned
Exception java.sql.SQLException: Internal Error: Image is not in 8.1 format
Exception 17001 state null
Any idea what might be wrong? I dont see any error on db side at all.
ferdo
Message was edited by:
frpkoo

I found similar bug reported on Metalink on April 8,2005
Bug no 4294423
Getting java.sql.SQLException: Internal Error: Image is not in 8.1 format Error Code: 17001 When running JDBC program that access many User defined Types .
But cannot find out what is the status of it.
Any idea?
ferdo

Attached a pic (jpeg) to a mail message it automatically down sizes image

Why when I Attached a pic (jpeg) to a mail message it automatically down sizes image?
I want to send the acatual jpeg (3meg) not a down sized representation.
(I dont want to put in iphot as it's not a photo it's a good-resolution artwork image.)
Please please, how do i attached afile without it automaticlly being downsized??
Jules.

I have same issue , no matter how I attach an art image from iphoto and choose actual image it automatically downsizes it , I cant send a 3mb picture and it has to go out in jpeg , I also use mobile me , nothing works, any help thanks

I'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.

i'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.

''rojere [[#question-1055991|said]]''
<blockquote>
i try to keep my thumb palms off the mouse pad when i am typing but every now and then my screen resizes larger or smaller until i take my left palm off the keyboard base its only when my left palm is resting on the base next to the touch pad. i type pretty fast so it gets annoying and yes it also jumps screens or reverts back to previous message and i have to choose ctrl z to undo and get back to my message i was typing... it also switches tabs on me as well... not sure why my palm being on the left of the keypad on the base should effect anything but it does after a while. and i have to stop what i am doing...and go to the firefox menu and change the screen size back down to 100% sometimes it goes up to 200-300 other times it goes down to 70-80% i find it annoying i i wish there was a way to turn off the screen resize in the setup panel. if its just left to be 100% i am happy with that... i don't need it to be bigger or smaller... there should be a way to LOCK it down... i understand that there are people out there with eye problems and needs to have the screen size increase using the + or - but there should be a lock so it just stays no matter what is happening on my keypad or touch pad or base of the pad... that screen size will not increase or decrease. unless i turn off the lock... perhaps this is something they can implement in the next version or do a quick update of the browser
</blockquote>
sorry that is all greek to me thanks for attempting to explain what you were trying to explain sorry i just not tech person to be able to understand or where to begin ... have good day and thanks for again trying

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara

Report viewer is not printing the exact font size format if the application is run through virtual machine or RDP.

Hi good day!,
I'm still having this problem with the font size format of my report, although I already installed this hotfix at http://support.microsoft.com/kb/2768741/en-us, if I run the application using RDP or virtual machine. Anyway, I'm using VS2010 with sql server
2012 express through windows 7. Actually, I tried to search for a new and updated hotfix version but having no luck,:) since i'm not good at it (google search).:)
So, I need help on how to fix this problem.
Your help will be greatly appreciated.
Thanks!
Hardz

Hi JJorheim,
Thanks for the link that you had given. Actually, Previewing the report on an RDP or VM environment is not a problem at all because it yields smooth result based on the report design. The problem only exist if print button icon of the report viewer is pressed
which results to a magnified font size printout. I think it is a rendering problem a somewhat default behavior of a report viewer print method. So one of the remedy is to adjust the resolution of an RDP or VM to 1024x768
(4:3 ratio) as suggested by the others, which momentarily solve this problem but not necessarily the other way around.
Anyway, thanks again for the reply.
Hardz

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

Error:SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. --- There is an error in XML document (1, 447). --- Input string was not in a correct format.

Hi All,
We have a scenario of FTP-->PI---> Webservice. While triggering the data in the FTP, it is failing in the PI with the below error
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 447). ---> Input string was not in a correct format.
Can you please help?

Hi Raja- It seems to be a data quality issue.
Check for the value @ 1447 position in the xml message that you are trying to send to web service..
may be a date filed/decimal value which is not in expected format.

I can no longer access Bejeweled Blitz through my facebook account. I get the message that says, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". Help please.

I can no longer access Bejeweled Blitz through facebook. I get the message, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". I can access Bejeweled through FB using my husband's log in so to me that suggests the problem is with my log in. Help please.

Contact FB or use another browser.

Saved keynote document could not be read. Error message says The document does not have a valid format.

Using Keynote '09 on an iMac OS 10.8.4. Two of my students saved a Keynote file then the next day when trying to open received an error message- The document "4b Molly.key" could not be read. The document does not have a valid format. The students are saving correctly. Any ideas how we can retrieve a working file? Why did this happen?

Just tagging on as I encounted this problem this morning. I'm using Mavericks, on MBP (late 2013).
Have both Keynote 5 and 6 - tried to open the file in both, to no avail. I have also tried the renaming of .key to .zip that seemed to work for others with previous OS, but does not fix now. Also tried uploading to iCloud, renaming, redownloading - no fix there either. I've tried to open on iPad and on a different user's iMac - again, get the same error.
It worked yesterday and the day before. It is a large file; however, I realized that from last night to this morning the only different thing I did was that I inserted photos in the keynote deck by drag & drop verses Insert/Choose and wondering if this corrupted the file.
I'm going to hope a fix is out there somewhere and that I don't have to spend hours upon days upon weeks redoing this 98+ page deck.
Any suggestions?

I am getting this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles

I am trying to send a message with an attachment, I get this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles help us stop spammers.). Please check the message and try again.
== Today

Me too (with Thunderbird). EXCEPT it reads
Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support...
Occasionally the mail "sends", but it is unpredictable. Tech Support at Qwest (for q.com under Windows Live) does not find a problem at their end.
More suspiciously, the same account accessed from my Mac does not seem to exhibit this problem. Have reloaded T'bird. Recurred again.

When I try to open images I am getting this message: "The file "image.jpg" couldn't be opened because you don't have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?

When I try to open images I am getting this message: "The file “image.jpg” couldn’t be opened because you don’t have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.iBooksX
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Elements 9 does not accept or process RAW photo images taken with a Nikon D7000.

Adobe elements 9 does not accept or process RAW photo images taken with a Nikon D7000. I called support for a download patch and they said I had to purchase a support package or essentially purchase Elements 10. I can't believe that Adobe would not have a download patch for this problem as my elements 9 is not very old. When I try to do the updates Adobe says the serial number of the elements 9 is not accepted for download or support even though I purchased it and registered it with Adobe.
Is there any solution to this?
Thanks.

Thank you but still having a problem. I go to the edit menu>>help>>update>>check for updates and an update to 9.03 comes up as the only update, no camera raw update. It starts to download and then stops and says to close organizer and/or editor then starts back up and stops again saying "error installing this update. Close and contact customer support". When I called customer support earlier that's when they said they don't support 9 only v. 10 and did I want to buy support or a new program v10 to get camera raw processing for the Nikon D7000 RAW. Apparently I'm doing something wrong in the update procedure but don't know what. The camera raw version is 6.5 in my elements and understand that camera raw v. 6.7 is the update to process the images. Any ideas? If I uninstall and reinstall does the serial number still work on the reinstall?
Thanks for help.

Not able to use FORD SYNC to text message in my car

My old DROID2 I was able to use phone and text message from the car. My new new SAMSUNG G3 .. I can use the phone part .. but unable to use the text part. The error I see the device does not support messaging with bluetooth. I like being able to hear/see txts that come to me in my car. 2011 Mustang with the full screen navi. I went back to the old droid2 it will work ... but ugh.. How Can I get it to work with the new phone? Is there a fix needed?
I have unpair the device and removed it .. and added it again same issue. Bummer!

I have the same issue. I have a 2013 Dodge Dart with the Uconnect system. It supports texting using the MAP Bluetooth. The one reason I swapped my Thunderbolt was because the GS3 was supposed to have the MAP Bluetooth. Also, my son's Droid Razr M has all the bluetooth profiles and connects up fine. It is neat to be able to use the texting features while driving. I can't put in custom responses but they have 18 preinstalled ones to use while driving. It is shameful that with all the laws about texting and driving you can buy an awesome new phone and an awesome new car but they can't communicate with each other. The phone part works and the media player works but texting would be a nice addition.

Message " not taken care size (format) of image"

Similar Messages

Maybe you are looking for