Message not working on iPad

When I am connected to the 4G network messaging does not work. Messaging does however work when I am connected to WiFi

I was having the same problem. It has something to do with the icloud email address. Here is a link to a TekRevue article that has easy steps for managing the messages. I also had to check my iPhone phone number for the iPad to display the code.
Here is the text of the article:
Thankfully, a MacRumors reader discovered the solution to the problem: make sure your iCloud email address is enabled for iMessage on your iPhone:
…you need to have your email address turned on for iMessage on your iPhone in order to enable Text Message Forwarding. If you don’t, the numeric access code will not appear on your iPad or Mac during the setup process. As soon as you enable your email address for iMessage (you only need to do this on your iPhone) the numeric access codes appear as expected. Once you have text message forwarding setup you can disable your email address again in iMessage as it seems to only be necessary for the numeric access code setup step, not the actual text message forwarding itself.
As iMessage users will remember, Apple lets users enable both their phone number and email address as methods for the receipt of text messages. Some users may have disabled their email address and chosen only their phone number in order to maintain consistency between iMessages and regular SMS messaging, and it appears that these users are the ones experiencing problems with SMS relay setup.
To enable your email in Messages, grab your iPhone and head to Settings > Messages > Send & Receive. There, you’ll find all of the addresses at which you can be reached via iMessage. Enable your iCloud email address by tapping on it, then head back to your Mac or iPad and again request the pairing verification code from the Messages app. This time, you should see a box appear on your iPhone in which you can enter the code.
http://cdn1.tekrevue.com/wp-content/uploads/2014/10/iphone-sms-relay-activation- code.jpg
http://www.tekrevue.com/tip/sms-relay-configuration-fix/

Similar Messages

IOS8 video messaging not working on iPad Air

Audio works fine, and audio and video both work on my iPhone, but no matter how long I hold the camera button in messages, all I get is the photo library/take photo or video options.

Camera screen gives choice of photo, square or video. When I tap video not coming on...has worked in past.

HT5012 Update my iPad to ios7.1 and messaging not working .......suggestions?

Updated my iPad Air to ios7.1. Messaging not working. Suggestions????

What happens when you try? Getting an error message?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Multi gestures not working on iPad Air ios8 onwards

Multi gestures not working on iPad Air ios8 onwards. Turning gestures off then on works briefly. It's annoying. Is the Air bust? In for rep-air?

MMine has not been working ever since ios8 update. Apple blamed a game I have on the iPad, however this problem occurs on all apps including apple own brand.
ITs it's almost like they don't care
come on Apple sort this out !! It's been too long

Printer not working following iPad uodate

Printer not working following iPad upgrade

Hi,
Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
Other things to check would be that there have been no recent changes to the wifi password.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Flash Variable is not working in Ipad

Hi Experts,
I'm facing with an issue, could you please suggest me your valuable suggestions.
I have created Two dashboard (Example names A1 and B1), I need to open the dashboard B1 without asking credentials, when I select an Image in A1.
To work in such a way, I have created a flash variable and pointed the range to cell J1.
I have placed a URL button on top of image in Dashboard A1. I have copied following URL in a cell, and this URL I have pointed to URL Button.
URL= (="../../../Xcelsius/opendoc/documentDownload?iDocID=M1TVABCADjs2AHoAlg123AAgoBpgwAAAA&sIDType=CUID&CELogonToken="&J1)
Opening B1 dashboard from A1 is working fine in desktop and in Android tab, but it is not working in Ipad. Not working in Ipad in the sense a new browser window is opening with empty page.
I have tested in another way like, passing opendocID and Flash variable to the URL button, It is working fine in Ipad but asking for the credentials.
Experts could you please suggest me some solution.
Ipad is Ipad2 and BO Version is 4.1 SP4.
Thanks & Regards
Karthik M

Hello,
You hyave to use the special flash variable "CELogonToken"
Would request you to check http://scn.sap.com/docs/DOC-36362 this is a SCN document
with title "Step by step way to create parent child dashboard in BI 4.0/4.1 using flash variable".
SWF loader is not supported for mobile.
Best regards,
Mohamed AISSA.

IN USING IPAD, ITUNES NOT WORKING ON IPAD 3?

ITUNES NOT WORKING ON IPAD 3?

What exactly is the problem?
The iTunes App on your iPad is a portal to the iTunes Store for music and videos. It needs a connection to the internet (either WiFi or cellular) to work.
To play music on your iPad, use the Music App. To play videos on your iPad, use the Videos App.
If you need help using your iPad, look at the iPad iOS 5.1 User Guide

Letter F not working on iPad

Letter F not working on iPad 2..have to press real hard to get it working

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

HT1349 Stylus not working on iPad

Rubber stylus not working on iPad

it could be that the stylus is just bad. I have used cheap rubber ones before and found them to be horrible..

[svn:bz-trunk] 16395: Bug: #2621264 [Regression] Small messages not working with NIO-HTTP endpoints in LCSD/trunk.

Revision: 16395
Revision: 16395
Author:   [email protected]
Date:     2010-06-02 05:00:56 -0700 (Wed, 02 Jun 2010)
Log Message:
Bug: #2621264 Small messages not working with NIO-HTTP endpoints in LCSD/trunk.
QA: Yes
Doc: No
Checkintests: Pass
Details: This is the BlazeDS side of the fix. This wasn't a regression, it probably never worked correctly. So, in the scenario where there's a Producer and a Consumer, and Producer sends a message for the Consumer, there are 2 messages from the server. The ACK message for Producer's send, and the actual message Consumer receives. I found that the ACK message was in small form, but the actual message was not in streaming messages. This was because we never really tried to convert streamed messages into small messages before.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingAMFEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingHTTPEndpoint.java

The smtp outgoing server which works for Ipad will not work for iPad mini?

Why would the out going server which works for iPad not work on iPad mini

Mike found this from the website from your email provider make sure your using the imap server unless you want to use pop on your device.
Incoming Mail (POP3) Server:
pop.bellaliant.net
imap.bellaliant.net
Outgoing Mail (SMTP) Server:
smtp.bellaliant.net
imap.bellaliant.net
Incoming Mail Server Username
Your full e-mail address

I have a 3gen iPod message not working any solutions

I have a 3 gen iPod messages not working any solution

Start here:
iOS: Not responding or does not turn on
You are not really giving ups much information to provide more detailed advice.

Anyone's I Message not working this morning?

Is your I Message not working this morning?

I've been using mine all morning.
https://www.apple.com/support/systemstatus/

ICloud Synchronization not working between iPad first gen 5.1.1 & iPhone 4S 6.0.1?

iCloud Synchronization not working between iPad first gen 5.1.1 & iPhone 4S 6.0.1?

I can see the acknowledgement that this issue will be fixed in the 'next' software update. Considering the original post was for an iPad 2 running 5.0.1, I am not sure if this issue on iOS 5.1 which runs on my new iPad (4G) is considered fixed. As I reported in my previous post it is impossible to update individual tracks. I also tried adding entire collection to a single playlist, shuffling the playlist. While shuffle is in progress, turning to the 'list' view that allows tracks to be rated does who the currently shuffled playlist and the currently playing track and assigns the rating to the track correctly. However, as soon as the second track plays, switching to list view (which displays the ratings) lists only the tracks from the currently playing track's album. Which is insane IMHO.
So, was this not fixed with 5.1 update? Or the iOS 5.1 will get it's own piece of update on this?

IOS Group Messaging not working when Android phones are involved

Group Messaging not working for me when there are both Iphones and Androids involved. iPhones still using iOS 7 don't seem to be having problems leading me to believe this is an iOS 8 problem. Is there a workaround for this yet, or is this a legitimate bug fix that Apple will have to address?

Hey geoff_zen,
Thanks for the question. After reviewing your post, it sounds like you arr having trouble with group messages. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Messages
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Message not working on iPad

Similar Messages

Maybe you are looking for