Message number required

HI
if there is no output condition in PO, then while saving we get a message stating " No output message determined" . Can somone please give me the message number.
Thanks
Ankit

Hi,
Message no. 06 261
Regards
Ravi

Similar Messages

ERROR Message Number required

hi,
i want to make Asset numb as mandatory for Capital PR ,if not entered system has to throw error
please let me know any standard error message available in the system

i want error message at the time of Finance release
not at intial level . if i set in OLME, it becomes mandatory during PR creation
Error should be only to Capital PR That during finanace release...........

MRP Exception Message Number

I need to write an ABAP report which uses the details on the MD04 Stock Requirements List detail screen for those items which have an Exception Message number (10, 20,30 etc..). The screen shows this data is held in a structure called MDEZ. I have tried performance tracing and ABAP debugging but can't find the actual database table where this data is held.(I'm a newbie).
Can anyone help with the relevant table name or appropriate function module?

Check form AUFBEREITUNG_ANZEIGE in main program SAPMM61R, include MM61RF40 in particular - forms aufbauen_mdpsx & mdezx_aufbauen.
They use 2 FMs to retrieve data, but these FMs require proper values to be passed in... so check all code in the form AUFBEREITUNG_ANZEIGE.
As an option - you may try to call this form like
perform AUFBEREITUNG_ANZEIGE(SAPMM61R). and then use field symbol, to access MDEZX.
assign ('(SAPMM61R)MDEZX[]') to <fs_mdezx>.
I hope this helps.

BPEL Message Recovery Required

Hi Friends,
while execute the Database to Database BPEL process i encountered the below exception. can you please any one let me know, at what situation we may get this type of exceptions and how can we overcome it.
BPEL Message Recovery Required
This flowtrace contains BPEL messages pending recovery. To view and recover these messages, navigate to the Recovery tab on the BPEL Service Engine home page.
Invoke 1
Callback 0
Activity 0
To locate these messages in the BPEL Recovery tab, select message type and filter by this ECID:
11d1def534ea1be0:6e77e19a:132905ba474:-8000-00000000000005b4
Thanks,
Hari

We have an option in the EM console to retry all faults for a composite by setting some values in custom MBeans. They are available as Advanced BPEL properties in the SOA Infra engine.
The MBean that allows recovery of faulted instances is RecoveryConfig. It has two options for retrying
RecurringScheduleConfig : A recovery window may be specified (most probably off peak hours) to recover all faulted instances. Messages being recovered can be throttled by limiting the number of messages picked up on each run by specifying the maxMessageRaiseSize.
StartupScheduleConfig : With this setting on all faulted instances are automatically retried when the soa server is booted up for restart.
More details on how to use RecoverConfig Mbean can be found here
http://download.oracle.com/docs/cd/E14571_01/relnotes.1111/e10133/soa.htm#RNLIN1052

Making message number blank for validation in ob28

Hi all,
I'm having a requirment to make the message number and message text to blank for validations in ob28.
when i'm trying to edit by default it is taking message number as 000.i want it to be blank.
Edited by: miriamjs on Jun 9, 2011 9:25 AM

Please explain the rationale. If the outcome of a validation is "false", the user is supposed to be informed via an error message that you assign here, and the document cannot be posted without correcting the error.
What is the point in not issuing an error message?
Thomas

MESSAGE STATEMENT REQUIRES ERROR NO.

WHEN I WRITE:
(MESSAGE 'Not a valid Accounting Debit Note' TYPE 'I'.)
TO GENERATE A POP-UP.
THEN IT GIVES ME AN ERROR I.E.
(THREE-DIGIT ERROR NUMBER XXX REQUIRED IN THE "MESSAGE EXXX.." STATEMENT.)
HOW CAN I RECTIFY THIS.
PLEASE HELP.

hi,
go to se91.
create a message class.
let the name of class be zm050.
message number is 001.
*Message is 'Not a valid Accounting Debit Note'.'
MESSAGE s001(zm050).
it will work.
rgds
anver
pls mark hlpful answers

Error Message: Number is not in external Interval (Testing Schedule)

Hii ,
Iam working on Stability study process. I have maintained stabity test with materiial (QS) & performed my test upto Initial test of Inspection lot. But when i click create Testing Scheudle in the Notification (QM02) , system asks for testing schedule data for
Maintenane strategy, scheduling period.
On clciking create testing schedule , system throws error message "Number is not in external interval". I have maintained all the prerequite setting on number range in following spro path stability study>testing schedule for stability study> Category--> no range.
For Group ST 600000000- 6999999999 for Intenal & 70000000-7999999999 for external. But still iam facing with error message ""Number is not in external interval". It throws message no "IP324" . Even I had cross checked with maintenance setting, but error message remains . How to resolve this issue?
with regards,
K.Lokesh.
Edited by: Lokesh K on Mar 11, 2010 1:13 PM
Edited by: Lokesh K on Mar 12, 2010 5:55 AM

Hi Lokesh,
did you actually enter a number ( i.e. 70000001)?
Usually Stability studies are created using the external number range so that ringing names can be used for the studies:
Example:
Material: 000000000000000001 acetylsalicylic acid
Stability study: ASA1
I hope that this information proves usefull.
Regards
Isabelle

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Write message to Job log with message class and message number

hi folk,
When running a background job I'm able to write a message to the job log using the statement - Message "some text..." type 'I'.
In the Job log I can see the message "some text.." with a "default" message class and message number (but in my report i don't specify any message ID) so I have no idea it comes from.
Then I try to send a message where I specify the message class/number etc...using message id 'Z1' number 000 with "some text..." In the job log I now can see the "right" message class "Z1" and the number 000, but the message is empty?
Please advice how to write a message with the message class and message number.
Best regards
LinhNg

Hi Linh,
How did you provide the text "Some message"? Did you hard code it or used a text element?
Regards,
Immanuel.

I can´t rent movies on Apple TV I keep getting this message: Verification Required Before you can make purchases, you must go to the ITunes Store on your Computer and verify your payment information.

I can´t rent movies on Apple TV I keep getting this message: Verification Required Before you can make purchases, you must go to the ITunes Store on your Computer and verify your payment information ? Done and still aren´t able to rent.

Hi.
You will need an iTunes acount !! then just log in to it and confirm your card payment details.
I've don the same think!! good luck! it works for me.

When trying to launch iTunes it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." I am unable to enter a uname or password. Please help!!

When trying to launch iTunes on my PC running Windows 7 it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." Because iTunes is frizen at this point I am unable to enter a username or password, or in fact do anything. Please help!! I have uninstalled and reinstalled iTunes numerous times as well as attempting all of the fixes that I could find on-line and still no joy.

That sounds extremely phishy to me... iTunes does not require authentication simply to launch it. I suspect you've got something nasty intercepting network traffic. That server may be set up to log the Apple ID that you enter so it can be used fraudulently. Try ComboFix from Bleeping Computer.
FWIW the domain mellor.co is registered to an accountants in Knutsford, Cheshire, UK, and produces the same authentication request if visited with a browser. There is no sign of a "real" publicly visible website at that domain which is a somewhat odd.
tt2

I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss

I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss
how do I find the file and replace it or install it?

I'll reload it tonight when I get home...basically, I bought a new iPhone and downloaded some new medical apps. also had to download an update for iTunes into my mac laptop so I could access iCloud (which was NOT on my prior iTunes software)
When I synched my new iPhone with the newly downloaded iTunes, I registered my iphone and tried to "back it up" to iCloud and the message indicating that "the required file was not found or has a permissions error...." popped up.
How do I correct the permissions error, or...am I able to do this somewhere? Or...how do I find the file that is missing?
Dr. Bob001

HT1848 I cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please hel

cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me

Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization

HT1420 When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?

When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?

iTunes: Missing folder or incorrect permissions may prevent authorization
Mac OS X
Log in to your computer using an administrator account.
In the Finder, choose Go to Folder from the Go menu.
Type: "/Users" (without quotes) and click Go.
If the Shared folder exists
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod -R 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod -R 1777 /Users/Shared
Press Return.
Quit Terminal.
If the Shared folder does not exist
The following steps will recreate the Shared folder if it is missing and ensure that it has been assigned using the correct permissions.
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Type or copy and paste the following command into the Terminal window:sudo mkdir -p /Users/Shared/
Press Return.
Enter your administrator account password when prompted, then press Return.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod 1777 /Users/Shared
Press Return.
Quit Terminal.

Message number required

Similar Messages

Maybe you are looking for