Message on bootong the laptop that cooling fan is not operating correctly

tell me ..how can I resolve my laptop problem

Bend out a paperclip and put it in the fan grille so it holds the fan blades. At the same time, take a can of compressed air and blow it in there. This may loosen a dust clog and allow the fan to spin correctly. If that does not work all you can do is disassemble the unit and replace the fan.

Similar Messages

The cooling fan is not operating correctly

I dont know why, suddenly when i turn on my hp notebook there is allert that the cooling fan is not operating correctly, aand system gives suggest to shut down.
What shoul i do to fix this?
Thank you

Hi,
You can try the steps from this link below and check if it helps. Moreover after that error comes up if you immediately hit enter the computer will load to windows. Once in Windows you can download the latest BIOS update as that from HP Support and Drivers and install it.
System Fan (90b) error message on startup
You can also refer to this Post
If problem continues then you may have to get the fan replaced. If the computer is still under warranty then you can call HP Tech Support for repair.
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Cooling fan is not operating correctly

hello,
my cooling fan is not working .and a massage showing as i start laptop and after showing massage ,laptop shut down in few second. please tell me what should i do.

Hi
Would you please advise which platform you are using? I suggest upgrade BIOS to see if it works, thanks.
I am an HP employee.
The opinions expressed here are the personal opinions of me, not of HP.
Kudos are appreciated if I have helped you.

'Cooling fan is not operating correctly' - System Fan (90B) - HP Envy 14 2002ea

Hi
I just bought this laptop off of someone and am having this error appear at startup. It only appears on fresh startup, not if I restart.
I can hear the fan working and it's not particularly noisy, although it is on continuously. Is this normal? I also have an Envy 14 1050ea and the fan in that is running quieter and also definitely cooler. Although the Envy 1050ea is i5 and the 2002ea is i7.
I thought it might need a BIOS uprade for the 2002ea but turns out the latest is already installed (F.0F).
Has anyone else had and/or managed to rectify this problem? Don't really want my laptop to melt on me...
Thanks

Try a hard reset. Remove battery and AC plug; hold down power button 30 seconds. Wait 30 seconds. Plug in AC. Power on. Also try going into the BIOS (F10) and reset to default settings. Lastly take a bent-out paperclip and stick it in the fan grille to hold it from spinning out of control. Now blow in some strong compressed air. If none of this works, the fan needs to be replaced. The part is cheap but it requires significant disassembly.

Cooling fan is not operating properly.

I am using hp pavilion dv6 3123 tx with windows 7 ultimate os installed. I recently updated the bios via hp support assistant and i don't know whether the bios is updated or not and after two days ,I got a message while booting the system that the cooling fan is not operating properly and it also shows the error message code (90b). Is it safe to use the laptop with a external cooler pad and my laptop is not getting heated too much while using with the cooler pad but before updating the bios too my laptop used to get overheated and it took time to boot. Before updating too i got blank screen while booting up and while playing games it hung too.
I don't know the error message occured was due to updation of bios or not and i also need to know can i use my laptop for final year project work with external cooler pad.can i give my laptop for service.

Hi
Please find the link given below might help you to resolve your issue. In case the issue still persits kindly request you to call HP Technical support check the warranty and get the Fan replaced.
Reducing Heat Inside the PC
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Cooling fan is not operating at all?

I got an error message saying that my cooling fan is not operating and to log in to this website. The fan is truly not working at this time.

I have 3 fans one of them not working. is that normal?
http://www.themodernman.com/how_to_talk_to_women.html

Fan is not operating

Dear Sirs,
I'm from São Carlos / SP / Brazil and I bought a TouchSmart Notebook HP ENVY 17-j041nr in Orlando at the Microsoft Store in Millenia Mall 30/10/2013.
However, the unit is experiencing the following error:
"The system has detected the cooling fan is not operating Correctly.
Continued operation is not recommended and may cause unpredictable behavior That Could Result in random shutdown, possible data loss or system damage. The system will shutdown in 15 seconds. To Prevent shutdown operation and continues operation, press the Enter key now.
System Fan <908> ENTER - Continue Startup "
The unit is still under warranty according to data from HP:
HP ENVY TouchSmart 17-j041nr (response from the HP website: The following information is provided for your product)
Warranty Status: Covered under warranty Warranty end 10/30/2014 (YYYY-MM-DD) Date
I would like to know, please, what to do?
Best regards,
Edvaldo Luís de Almeida

Hello Vadoalmeida,
Welcome to the HP Forums!
I understand you have questions about warranty service for your ENVY 17-j041nr. The good news is that HP has a Global Warranty, but their are some restrictions. The Global Warranty basically means your product will receive warranty coverage based on the available coverage in your current location. For more detailed information you can view the Global Warranty and FAQs page.
For more specific information about the error you have you can view this document specifically for System Fan (90b) error message on startup. This document has a list of steps you can try before contacting support for service.
If the document above does not help you resolve the issue I would suggest contacting phone support for service options. You can contact support in Brazil at this phone number: 0-800-709-7751 - Support is only available in Portuguese for this region.
Hopefully this helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
If your iPhone was hacked/jailbroken the update restore the lock.

HP 15-d103tx starts overheating even after changing the Motherboard and cooling fan.

I puchased a laptop before 6 month but it starts overheating in very less time. The motherboard and cooling-fan has been changed but again started overheating in 2 weeks.
Is there problem of intel processor or some other problem??

Dear Customer,
Welcome and Thank You for posting your query on HP Support Forum
Please perform the below shown steps to resolve the issue:
1. You should clean all the Vents and Openings really good with a can of compressed air
2. Check if the Fan is spinning when AC Adapter is connected
3. Boot into the BIOS >> System Configuration >> Device Configuration >> Enable "Fan always ON"
4. Update the latest BIOS and Graphics Driver
Note: Please Click Here to find more steps involved in troubleshooting this issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

Click here and follow the instructions.
(98724)

HT1420 The laptop that was authorized for my iTunes has died. How can I move my iTunes library to another computer?

I have LESS than 5 computers in my home and one of which has died(hard drive unrecoverable) how can I deauthorize the laptop that has died?
This URL http://support.apple.com/kb/HT1420 only describes how to deauthorize working computers.

I don't think you can. Well not at least until you have 5 computers authorized. When you have 5 computers authorized there should be an option to "unauthorize all" in your account settings.
If you get to 5 computers authorized and you need a 6th, do this and then re-authorize the others you need.
It would be handy if you could just pick a machine to unauthorize in iTunes.

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

I attempted to update iTunes yesterday and I thought the process completed without any issues but when I tried opening iTunes today, I got an error message that said "iTunes was not installed correctly. Please reinstall iTunes. Error 7"

Attempted to update iTunes on January 23rd and it appeared to install properly. When I tried to open iTunes on January 24th, it would not open and gave me an error message that said "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)" I then tried to reintall iTunes and it again appeared to install properly but when it attempted to open, I was given the same error message.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Message:The Link that you requested is not present on this Clean Access Sys

Hello:
Someone have seen this message:
The link that you requested is not present on this Clean Access System, if you reached this page by following a link from the user interface of the clean access Manager or Server,then please report this as a bug.
We receive it with NAM 4.1.3 after Web Agent scan and authorizes users to login on the network.
But the users appears on temporary role!

Better solution is update the bookmarks, If the CAS was recently upgraded, then close and re-open the browser window and load CAS admin URL and try again you will not get any error message.

Message on bootong the laptop that cooling fan is not operating correctly

Similar Messages

Maybe you are looking for