Message only for the Forum Administrator - others kindly ignore

Other Viewers, please excuse me, I am not sure where else to post this question.
Dear Administrator/Moderator,
I am posting queries mainly in SQL and PL/SQL category.
In the Forum Search Page, when I search against my UserID '573641' and
All date range, All categories and Results per page as 15, I am not getting
the expected result, like I could not see the messages posted today recently.
I have posted overall more than 70 messages, where as it is just showing only the below numbers,
SQL and PL/SQL (31)
Database - General (4)
Heterogeneous Connectivity (1)
Warehouse Builder (3)
Due to this I could not see the messages I posted recently or all the messages, please help, thank you.
When I try to view the below URL,
http://forums.oracle.com/forums/search.jspa?threadID=&q=&objID=c84&dateRange=last90days&userID=573641&numResults=15
It says '0' messages, which is not correct.

Sorry this is not possible with any email client such as the Mail application.

Similar Messages

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account and reseting it and it still only picks up the old messages? Anyone else having tis problem? ANy ideas how to fix it?

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..) and setting the account back up? and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
This just started happening for no reason...no changes to the phone or Ipad?

my iphone and ipad will not send or receive emails or messages for the last few days. it is telling me that cannot connect to server

Hello, I am running a Mac book pro soft. 10.5.8 version. Since june the current year I did not get any updates for the software or any kinds of other application, in my opinion that's weird for such a company.

Hello, I am running a Mac book pro soft. 10.5.8 version. Since June the current year I did not get any updates for the software or any kinds of the other application, in my opinion that's weird for such a company.
The problem that I have now is with the Iphone 5 which is not supported for the current Itunes and I can not download the Itunes 10.7 version. What I supposed to do in this case because I can not syncronize at all.
Please give me a hand as soon as possible.
Many thanks

Mac OS X 10.5.8 is years old, 3 major versions out-of-date and unsupported at this point. You will never get any further updates for 10.5.8, and more and more applications will stop supporting 10.5.8 as time goes on. As mende1 points out, you can buy Snow Leopard (Mac OS X 10.6), which will let you use your new iPhone with your computer, but you need to make sure your computer's hardware is supported. See the system requirements for Snow Leopard:
http://support.apple.com/kb/SP575
If your computer cannot run Snow Leopard, you will need to either buy a new computer or abandon any thoughts of syncing the iPhone with that computer.
Also, note that you'll get far better integration of your iPhone and your Mac if you're using Lion (Mac OS X 10.7) or Mountain Lion (Mac OS X 10.8), which are required to use iCloud. Of course, the requirements of those systems are even steeper than those of Snow Leopard:
http://support.apple.com/kb/HT4949
http://support.apple.com/kb/HT5444

Page cannot be displayed message ONLY on the content area of the portal

Hi All,
I am using Netweaver Portal 7.0 and the portal works fine if logged in as an end user. But when I'm logged in as Administrator and whenever I try to create a portal object (iview or pages etc), I get a page cannot be displayed message ONLY on the content area of the portal. It is happening quite frequently, any clue what is wrong here?
Thanks for your help
-Mike

Hi
This could sometimes happen because of multiple users working on the same content .
Edited by: chandana kallu on Mar 11, 2008 1:41 PM

Applications are mentioned free, but when we start downloading one dollar is charged in my credit card, but only for the first time when i switch on and use it for the first time one dollar is charged. and from next application it is free. why?

Applications are mentioned free, but when we start downloading one dollar is charged in my credit card, but only for the first time when i switch on and use it for the first time one dollar is charged. and from next application it is free. why?

Kindly inform any email id or toll free number to contact apple for your below answer, Mr.King_Penguin
About receiving my credit card being debited for Free App Store Application downloads,
It should be within a few days, but it might vary a bit by bank/provider :
I am in India, if the bank don't refunds , what to do?
Rajagopal.pngr :- It is only a holding charge, it is not a permanent charge. If it isn't refunded within a few days or so (and it quite possibly won't be over a weekend) then you can query the charge with Apple.

MIRO should be allowed only for the accepted Qty (QC accepted qty)

Hi Friends
I have one more requirement ,
MIRO should be allowed only for the accepted Qty (QC accepted qty) or Subcontract MIRO should be allowed only for the quantity accepted by QC
with QM control key in material master(QM view) we can block for payment,
but my query is MIRO should not be saved (message should come qty still lying in Quality inspection stock)
Please let me know the settings,
Thanks & Regards
Gajendranath

Hii,
Yes it is possible to restrict Invoice passing in MIRO if the Stock is in Quality stock / Blocked stock. The concept is while doing MIRO, u can validate the criteria by clicking simulation tab. U can get the things in BADI (Business ad in function) with the BADI object name as "Invoice_update".
The working is when the material is in quality stock & If ur doing MIRO for the same material, then system will pop up the message that "material with "X" qty is in quality stock" Invoice cannot be made. System does'nt allow u to pass the Invoice unless the stock is cleared from the quality. Even for the blocked stock we can simulate these error pop message.
with regards,
K.Lokesh.

What's all this about? [Question only for the Super Elite]

Tue Apr 28 13:41:59 2009
panic(cpu 1 caller 0x001A9C68): Kernel trap at 0x00000000, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00d05000, CR4: 0x00000660
EAX: 0x0714af00, EBX: 0x5bb17ef0, ECX: 0x0714afcc, EDX: 0x0f8a3b00
CR2: 0x00000000, EBP: 0x5bb17ed8, ESI: 0x07b6e600, EDI: 0x0714af00
EFL: 0x00010206, EIP: 0x00000000, CS: 0x00000008, DS: 0x5bb10010
Error code: 0x00000010
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5bb17cd8 : 0x12b4f3 (0x45b13c 0x5bb17d0c 0x1335e4 0x0)
0x5bb17d28 : 0x1a9c68 (0x464700 0x0 0xe 0x463eb0)
0x5bb17e08 : 0x1a038d (0x5bb17e20 0x0 0x5bb17ed8 0x0)
0x5bb17e18 : 0x0 (0xe 0xbc40048 0x10 0x10)
0x5bb17ed8 : 0x5ba7c4b9 (0x714af00 0x0 0x0 0x0)
0x5bb17f48 : 0x5ba7c547 (0x714af00 0x7b6e600 0xe548380 0x5b86dcd3)
0x5bb17f68 : 0x5b86dd5a (0x7b6e600 0x4 0x1 0xfa60800)
0x5bb17f88 : 0x5b86dd82 (0xfa60800 0x7b6e600 0x1367f3 0xfa60800)
0x5bb17fa8 : 0x5c0beda6 (0xfa60800 0xe0004004 0x0 0x0)
0x5bb17fc8 : 0x1a017c (0xfa60800 0x0 0x1a30b5 0x8173f20)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOUSBMassStorageClass(2.0.4)@0x5c0bc000->0x5c0c5fff
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.5)@0x5b868000
dependency: com.apple.iokit.IOUSBFamily(3.2.7)@0x5b1eb000
dependency: com.apple.iokit.IOStorageFamily(1.5.5)@0x5b404000
com.apple.iokit.SCSITaskUserClient(2.0.5)@0x5ba7a000->0x5ba7ffff
dependency: com.apple.iokit.IOStorageFamily(1.5.5)@0x5b404000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.5)@0x5b868000
com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.5)@0x5b868000->0x5b880fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
If I'm not mistaken, all the IO stuff is related to USB and FireWire devices, right? I had my iPod plugged in when I got he Kernal panic as well as running Disk Warrior on an external FW HDD.

"Question only for the Super Elite"
That is presumptuous on your part. Questions posted on a forum should be directed to ALL.
And your thread title is really bad. You should put some hint as to what your question is in the title.
Now that that is out of the way, I would suggest disconnecting all external devices except for your mouse and keyboard, running for a while and then reconnecting external devices one at a time in an attempt to isolate the offending device. I'm inclined to suspect external HDD.

Is the Database Vault portion of Audit Vault only for the Audit Vault DB?

Hi all, first of thanks in advance.
I am doing a bit of research in order to fulfill some security system requirements for an upcoming project. In summary the requirement states that DBAs should not have the ability to view personal health information stored in the database.
My initial thought was to use Oracle Label Security but recall that SYS is exempt from the OLS policies. Next I looked into Oracle Database Vault and the product appears to meet the requirements. However another part of the requirement states that we must prevent undetectable data tampering - which to me sounds like we need to have an auditing product in place not only to audit access and data changes but also to make sure that audit logs can't be tampered with. It seems like Oracle Audit Vault should meet the requirement. When looking into Audit Vault it mentions it comes with Oracle Database Vault and there is some wording which makes me believe that the Oracle Database Vault component is only for the Audit Vault database. Short of installing the product I thought I would post a message to see if my assumption is correct.
If the assumption is correct it sounds like we would need to purchase both Audit Vault and Database Vault to fully meet the requirement. Can anyone think of any reason we need to include OLS as well?
Once again, thanks in advance.
Cheers,
Eric

I imagine you are dealing with the HIPAA compliance requirements and facing the same issue faced by many others.
To audit who has viewed data ... SELECT statements ... you can use Fine Grained Auditing (FGA).
To meet the government's auditing requirements, as well as those for hospital accreditation Audit Vault will do the trick.
Keeping DBAs out of the data can be done by a number of means but the issue often comes down to the applications you have purchased and the quality of the vendors. One major source of hospital software in the US, for example, has installed thousands of systems with the exact same password for the schema owner ... and that schema owner has DBA privs.
So before your run too far down the road of closing the back door ... make sure the front door isn't wide open.

How Can One Run Only In The System Administrator ( ie root ) ?

Upon creating a System Administrator ( ie root ) in Command + R , of course after Clean Installing OS X ML with my own specific Apple Verified Account ,
i have the Log In screen from a startup , either Safe Boot or a Boot , and i have my own specifc Apple Verified Account , plus the Other... ,
which the Other... of course is the System Administrator ( ie root ) .
How Can One Run Only In The System Administrator ( ie root ) ?
Is there a way in Terminal with sudo su to make it work ?
Shall i just always log in with Other... System Administrator ( ie root ) , and just forget the my own specific Apple Verified Account ?

As of EHP3, you could still install some EHP components. On an ERP 6.00, you could just push SAP_APP to 6.03 and move on. Now if you want another component in your system with an EHP4 version, you can't have some components at EHP3 and some at EHP4. You would install EHP4 for the new component you desire updated and part of the work will be to also update SAP_APP to 6.04.
EHP4 is an UPGRADE process, with shadow instance & all the joy of an upgrade process. You can either run ressource minimized or downtime minimized. In resource minimized, the shadow instance runs on the same server as the main instance. Downtime minimized allow to run the shadow instance on a separate / new server. Anyway you go, you will always have a "Downtime Phase" when you bring back the updated components from the shadow instance toward the real production one.
As with any UPGRADE project, the benefits of installing EHP4 for your business has to weighted against the downtime cost.
Our tests so far on small systems (few data, few users, 120GB database) show ~3 days process from EHP3 to EHP4 (all components) with a downtime phase of about 22 hours using the "resource minimized" path, i.e. shadow & main instance on the same server (4 CPUs, 16GB RAM). Until you give a try at your Sandbox or DEV systems, you won't have realistic figures for your environment.
Good luck!

Approval procedure only for the check payments

Hi All,
Is it possible to intiate the approval procedure only for the check payments in the Outgoing payments ?

Hi Anand........
Welcome to SAP Business One Forum.......
Yes it is absolutely possible to create Approval Procedure for Check Payment.
Please refer the following Query for Check Approval
Select Distinct 'True' From OVPM T0 Where T0.CheckAct is Not Null and T0.CheckSum>0
Apply above Query to Approval Procedure and assign it to proper User. and then check.......
Regards,
Rahul

Tip strips only for the main VI?

my question is in the subject. So we need to use tip strips only for the main VI, since these tip strips give info to the user (who will only see the main FP), not to the programmer. Is this correct?
Solved!
Go to Solution.

prusty wrote:
I have a boolean control.. is it possible to build a program by which if I press the boolean switch, Another VI will open up in the existing VI..?????
Your question has nothing to do with this post, neither with the certification forum
Why do not search the general LV forum, and if you do not find an answer, post your question in a separate post!
If you use an Event structure, make an event for the button, and put a subVI there. If you set the subVI as a dialog VI, it will pop up.
But there are many many different solution for this, all depending on your actual requirements.
Specify exactly what is your goal, and make a new post in the general LabView forum.

Reset the password for the netweaver administrator

Using the netweaver administrator and trying to log in using a user 'administrator' it seems that the user is locked
We have the ABAP stack and i have administration rights with my user in SU01. How do i unlock that user or creater another administrator-user for the NW administrator?
Thanks

Not sure if your ABAP system is the same and has the same database like your java system.
On dual stack systems this user is usually named j2ee_admin while administrator is an indication this is a java stack only system?!
If dual stack you can simply add another user in SU01 with sap_j2ee_admin role.
If java stack only you'll need another user with admin privilege or you'll have to use the config tool to reset the password.

Report for the material having any kind of block

Dear All
I would like to have a report for the material having any kind of block i.e.(X-plant matl status OR Plant-sp.matl status).
Pl suggest any standard report or through table.
Rregards
Manoj

Hi
Trnx. SE16 Table MARA
fields
MSTAE X-plant matl status
MSTAV X-distr.chain status
Vishal...

Header Details to be Printed only for the line item details.

Hi All,
I have the following requirement.
I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
Thank you.

Dear Vasudha,
I am a little bit confused regarding your query,
"In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
Well my suggestion for your issue is,
1.I hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using the command node which you have used.In your case you will have to use a combination of both.
2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2) and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
In the footer section of the table which you have used, use a command node set to PAGE3. After the command node and under the same footer section now insert your terms and condition lineitem.
Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
So now this footer section will be triggered only once after all the data in the table is displayed
4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
Hope this helps.
Regards,
Riju

Message only for the Forum Administrator - others kindly ignore

Similar Messages

Maybe you are looking for