Message ouput releasing a purchase order

Hi all,
Our issue is that message outputs are not processed when a purchase order is released.  At the moment of creation, outputs are determined with yellow status since dispatch item is set to 3 (Send with application own transaction), but when I release the order, the status is still in yellow.
Do I have any missing configuration?
Thanks in advance.
Alberto

hi
dear as u have given Send with application own transaction  u have to go manually through transaction code ME9F
here u have to issue the print manually
for immidiate output u have to choose PRINT IMMIDIATELY (WHEN SAVE)
regards
kunal
Edited by: Kunal Ingale on Mar 19, 2010 9:21 AM

Similar Messages

  • Eror when release the purchase order

    hello,
    any body pls explain me. my client requires when they going to release the purchase order it should check the chapter id. if it is not maintained it should allow to release. is it possible. it yes please explain me.
    thaks
    bhakta

    The message you are looking for is actually available only for me21 &
    not for ME21N due to technical constraints.
    However you can make use of the following logic & customise the message
    to appear during PO creation through me21n.
    This is how the system works as of now. In ME21 this can be captured
    as an error message and the sytem displays it so. In ME21N the
    output of message is on the 'last in first out' process. In this case if
    there are any standard messages then the particular CIN message would
    not be shown. In case there are no other messages then this message
    is shown out. Customers can capture this mesage on a priority basis
    by making some adjustments at the time of display of this message
    in function module J_1I6_DETERMINE_EXCISE_RATE.
    You can write your own code to display the 'chapter id missing' error.
    In 'FV64A352' include program, we are calling the function module
    'J_1I6_DETERMINE_EXCISE_RATE'.In this module we are getting the
    'chapter id missing' exception when chapter id is not maintained for
    a material.So in 'FV64A352' just after this function module call, you
    can catch this exception(chapter_id_missing     = 1) and display your
    own error message there.
    This will be a customer modification from SAP standard, so please think twice before going ahead

  • MESSAGE TYPE DEFAULT FOR PURCHASE ORDER

    Dear All,
    I want to set default message type ZNEU for all purchase order. I try this with T-CODE MN04 AND MN05 but it is not working.
    SO HOW I MAKE MESSAGE TYPE DEFAULT FOR PURCHASE ORDER
    Regards,
    Pankaj

    Hi,
    Miantain the all the conditions records in t.code : MN04. after that check for the "Define Partner Roles for Purchase Orde" what did you mentioned for new or change as per that,
    Check you had fine tune the output (message) type in following path:
    SPROMMPurchasingMessageOutput controlMessage tyoesDefine message type for Purchase Order--Fine-Tuned Control: Purchase Order
    Select the check box coresponding to your output(message) type ZNEU to have print output for this message type .......
    Now try creating PO & u will have default message type ZNEU......
    Hope this will help you.......
    BR,
    Patil

  • Create custom data when releasing a Purchase Order

    Hello people,
    The customer uses ME28 to release the Purchase Order.
    They have, for instance, two release estrategies: W1/01 and W2/02, that differ about the price.
    The scenario is:
    When the customer releases a Purchase order from W2/02 strategy using ME28 transaction, we need to do some verifications in Z tables and create a record in another Z table. If for some reason the purchase order will not be released, this Z data does not have be saved.
    And if some error occurs and the data don´t be saved, the estrategy must remain blocked (not released).
    In which EXIT is the best point to do this?
    Thanks a lot!

    hey
    try these 2 user exits
    MM06E005 - ZXM06U43 which is called from exit EXIT_SAPMM06E_012. This code is hit at the time you check or save.
    M06E0004 - Changes to communication structure for release purch. doc - EXIT_SAPLEBND_002

  • A report showing all release  refused purchase orders

    Dear SAP Gurus
    Please assist, I need to run a report showing a list of release refused purchase orders.
    CN

    Hi,
    I dont think there is a standard report for that.. you can have the details from table EKKO with release indicator as 1 (EKKO_FRGKE)
    Regards
    Merwyn

  • Output message not generated for Purchase order

    We maintain MN04 message condition record for  2 key combination for output type NEU:
    1. Purchasing Output determination : Document type  -> NB, medium 1 print out
    2. Purchasing Output determination : Document type/Pur Org/Vendor -> NB, 1000, vendor 20001, medium 5 External email
    When I create PO for other vendor (not 20001), the system is nicely generating the output of the PO for printout.
    Next we have maintain a condition record in MN04 for a particular vendor 20001, Doc type and Porg with setting 5, 4, EN so that we can send the PO via email to the vendor 20001, the system is not generating a message output of the purchase order when i check it before saving.
    Please help me with this situation. we need setup the email PO functionality.

    I created another message type ZNEU copy from NEU, include it in the message schema, created condition record with MN04/MN05 for both NEU for printout  and ZNEU for medium 5 email. done all steps mentioned in the links.
    When create a PO still only 1 message record NEU is defualted for printout only.
    The message record for email ZNEU is not defaulted in PO?? Anything elase need to be done.

  • How to Release Mass Purchase order in production server

    Hi
    i have to release mass purchase order can any one help me how to that
    thanx

    Hi,
    Tcode ME28 will sove your problem,
    Enter:
    Release Code
    Release Group
    and press F8.
    Now here click on Release + Save button.
    Cheers
    utsav

  • Can't release an purchasing order

    Dear experts!
    Thank you for your attention!
    I can't release an purchase order when I processed a " 3rd party order with shipping nocification" .
    The purchase requisitions has been created automantically and been assigned and also been converted to PO.
    However, I can't release the purchase order with no reason.
    hint: the material is not define for the vendor.
    Where did the problem come out?
    Best regard!
    Tangdark

    Hi
    maintain info records in ME11
    and also sourcelist in ME01
    release in Me28 or Me29
    regards

  • Release Strategy - Purchase Order

    I have configured the relevant settings for creating the purchase order.
    I am now able to create the purchase order and email the same.
    However, the requirement is to release the purchase order by a Superior in the organization.
    I have come across the transaction code ME28.
    Can you please let me know the configuration and user transaction steps in order to follow he release strategy of the purchase order.
    Thanks in advance for your inputs.
    Regards,
    Ravi

    hi,
    Few points:
    1. Po can be released only at header level..
    2. For configuartion, go to SPRO >> IMG >> MM >> Purchasing >> PO >> define release strategy for PO >>
    here you shd set up your new release strategy ...for that you need to edit characteristics, class...
    first maintain your characteristics ie. from "EDIT characteristics" ...here create your own characteristics and enter the suitable data here...enter class type '032' for the same...
    reference the fields from CEKKO structure...and add your require release relevent fields...
    then go to EDIT CLASS...here define your new class and maintain same class type as 032...
    3. After this maintain release strategy...click on release group option..go inside...link your req. release group to class...so that the classified characteristics will seems while releasing the document...
    4. Maintain release codes...
    5. maintain release indicator...
    6. then maintain inside Release strategy tab...
    here define you already maintain group and codes...maximum 7 rel. codes are possible...
    then maintain preriquisite...
    In side classification, maintain the fields based on which you wanna release the PO...
    and maintain the other req. things on diff. tabs...
    7. after doing this check your rel. strategy at OMGSCK tcode ie. given in tree path at same place inside SPRO path define above..
    Try making a PO and check whether its working or not...
    regards
    Priyanka.P

  • Enterprise Services for release a Purchase Order

    Hello,
       Im looking in the ES Workplace an enterprise service for release a purchase order but I cant find it. Someone knows the name?
    Thanks
    Regards
    MG

    Hello Venu,
      Thanks for the response. I am doing what you said, I have exposed the BAPI as a web service, activate it (sicf), configurating the endpoint (soamanager), publish to the service registry (wspublish). But I have 2 problems,
       1. When I try to test it from the service registry it shows me this error: "Invalid transport binding settingsHTTP Client, does not have endpoint url specified", and I saw and the enpoints are configured.
       2. When I consume the web service through Web Dynpro, after I deploy and run, the applications show me this error, "java.lang.NoSuchMethodError: com.sap.tc.webdynpro.model.webservice.gci.WSTypedModel"wsexample1.wsexample1_model.Wsexample1_model.<init>(Wsexample1_model.java:124)".
    Regards
    SU

  • Block release of Purchase Order

    Hi,
    Has anyone had experience with creating a release strategy to block a Purchase Order based on the X-plant matl status located on basic data tab of material master?
    Thanks
    Mike

    Hi,
    Why go to the trouble?
    Maintain message "Blocked Purch and Prod of material does not allow external procurement" (Message no. ME 053) as an error. Then no purchasing/MRP etc can be done in the first place if block is maintained for material.
    Thanks.

  • Message output for New Purchase Order Document type

    Hi experts,
    I am having trouble getting a Print message output for a New Purchasing Document type that I created.
    Steps that I followed are:
    1.Created a new Document type NS via customizing.
    2.Assigned the new Purchasing Document Type NS to Output Type NEU which is linked to our customized form for Purchase order display. I used MN04 /NACE to do this step.
    Now the message output gets created for my new document type NS but I am unable to display the message.
    Notes:
    -There are no release stratergies in place for document type NS
    -The NEU format works fine the other document type NB which we use for Standard POs.
    Are there any steps I have missed? Please help to resolve the issue.
    Arosh.

    Goto NACE select application  EF Purchase Order then goto condition record NEU select condition record select the last key combination "Purchasing Output Determination: Document Type"
    here enter your doc. type execute
    maintain the condition record
    NS  VN(function)   1 3 EN and click on communication and maintain
    Or goto NACR here put EF and NEU and select the last combination "Purchasing Output Determination: Document Type"
    maintain ..
    NS  VN(function)   1 3 EN and click on communication and maintain
    Hope it helps..

  • ME28 Cancel release of purchase order

    Hello,
    when I try to perform a cancellation of a release of a PO I get an error message:
    ME 175 Document already treated. Function not possible
    It should be possible to cancel the release of alll released purchase orders. Can you help me?
    Thanks a lot!

    Hi,
    please read the following:
                                                                                    Note 493900 /12. Question :                                                                         
    Is it possible to cancel a release strategy when the purchase order has                
    been printed out ?   
    Answer :                                                                               
    With ME29N you cannot cancel a release strategy once the document has                       
    been printed out. This behaviour constitutes a new design. Regarding                        
    ME28 it has been decided to keep the old behaviour and you can cancel                       
    the release if there is at least one message type which has not been                        
    printed out.                                                                               
    Please note AT LEAST ONE message type has NOT been printed out with                         
    ME28.                                                                               
    Alternatively, you can try the following:                                                                               
    - Transaction: SPRO                                                                         
    ->MM->Purchasing->PO->Release procedure for PO                                              
    ->Define relesae procedure for PO                                                           
    ->Release Strategies                                                                        
    ->Release Status                                                                               
    - choose the button release indicator and                                                   
    5   Changeable, new release if new strategy/outputted                                       
    6   Changeable, new rel. if new strat. or value change/outputted
    - go into transaction ME22(N)                                                       
    - you will get the warning message 06 684 stating                                   
    'Releases already effected are liable to be reset'                                  
    - change the price and save the p.o.. Now a change message will be                  
    created and will be send to the vendor again.                                       
    - Please note that the release strategy will only be reset if the price             
    is increased. When it is decreased it won't be reset. But in both                   
    cases a change message will be created and send to the vendor.                      
    - after the change of the p.o. you will have to release it again. After             
    the release the change message will be printed.                                                                               
    Hope this will help to solve the issue,
    regards,
    Edit

  • Badi for emailing the release for purchase order,

    hi all,
    in me28->release (approve) purchasing documents->release purchasing document..there u have a button (release+save ) button
      i want to enhance at that pointi.e when u select the po no and click the button,automatically trigger an email to the vendor.
    i tried for enhancement-point,badis,user exits....nothing is getting hit.
    plz help,
    points wiil be rewarded,
    regards,
    johnson

    Hi
    In the PO, you maintain output messages for Printing ./ Emailing/ Faxing the Purchase order.
    The message has the despatch time maintained.
    There are 4 different Depatch times.
    1 - Send with periodically scheduled job
    2 - Send with job, with additional time specification
    3 - Send with application own transaction
    4 - Send immediately (when saving the application)
    When you select  4 in the message , whne the PO is finally released, the message will be processed automatically.
    When you select 3, you need to run ME9F transaction to process the message output.
    You can change the message in the PO , by clicking on the message button in ME22N transaction.
    So if the user has released the PO in me28 & clicked on Save this will process the message output
    Thanks & Regards
    Kishore

  • Message Sending Control (To purchasing orders)

    Hi experts,
    I d0n't know if this is the right section of the forum to post this doubt; please tell me if it's not.
    I'm Trying to implement a solution to give the user a dialog message telling If a message from a purchase order has been succesly sent.  I cannot give it at the moment so i i'm programming a job that will be executed dialy and gives a report about the messages that have not been succesfully sent that day.
    To check this we have parametered the spool for not deleting the orders when they are out, and that this
    orders stay in the spool for 8 days.
    We have 3 ways of sending depending on the field nast-nacha: By mail, printer or web.
    Firs of all we are controlling the status in the nast table.
    - Red(2): Sending error. We do not need to continue checking in this case..
    - Yellow(0):  the order has not been yet released, so will check it again in the next job execution.
    - Green(1): Nast tells us that the message hass been succesfully sent. But we have to check it again depending on the sending method. My doubts are in the this checking.
    - Printer: The can be errors like no paper or no ink in the printer and other thing like this. Does anybody know how can i request in abap if the printing has really been succesfully done?
    - EMAIL: I don't know how to check if the reciever have succesfully recieved the mail. ¿Maybe taking a look on his mail inbox? but the user maybe has lokked the message and manually erased it....
    - WEB: Messages sent by EDI. I have no clue about how to check this....
    ¡Thank-you for your help!

    you are trying the impossible here. you wouldn't need checking if you could assure all the sending-media were up and running.
    please also consider: in a couple of years you will have millions of rows in NAST. your job will be killing performance then.
    you cannot check printers: you can check in spool whether the host-spooler (in case your printer is a network-printer) has accepted and proccessed the job. this does NOT tell you that there was a printout! for example the printer might still 'eat' a page and you would never know it because the printer (the network, the host-spooler) will not transfer that message back to SAP. still worse with LOCL. via sapgui you can send the print to the windows frontend but whether it was processed successfully, you'll never know. windows does not deliver a message back. and even if you succeeded in adjusting your printing to give a feed-back, you'll slow the performance down immensily. the spool process in SAP would have to wait for your feedback before it would attempt to process another job - imagine how long that might take!
    eMail: this will not work either. if you are processing your eMails to a third-party system (like Outlook) using sapconnect you do not have a chance to peek across servers (not to mention architecture) into the users mailbox. and anyway: this might be strictly illegal (depending on your country). the 'peeking' part would only work if you keep the mail in R/3 (might still be illegal) but then you still have (and would always have in both scenarios) to deal with the user - what if he/she delétes her mail? what if he/she used transaction SO12 to forward the mail? what ...
    Messages sent by IDOC.you could do this but it might prove extremely complex, especially when serialized idocs are in use.
    i think you would be far better off to ensure, all the output media are properly maintained.

Maybe you are looking for