Message Output Failure

Hi Gurus,
                  I have a requirement where we need to have a list of Emails , Fax and EDI which have failed. In SOST i can get for Email and Fax. I would like to filter thm for purchasing only.
Which tables i need to refer for the failure data?
Regards
Rohan

Hi
Please refer to the table NAST with the corresponding application (like EF for Purchase Order, EL for Sch. Agr. Release, EV for Purch. Outl. Agr. etc.) and the Processing Status "0" for Not processed and "2" for Incorrectly processed.
Hope this helps.
Thanks
Prashanth

Similar Messages

  • Issue with "timing" in Message output of Change PO

    Dear Experts,
    For change PO, We are facing issue with the Timing in message output of PO.
    i.e, For example when we create a PO - the timing in message output is "1"
    after executing ME9F, the message turns GREEN - and still the timing is 1.
    Change PO : NOW WHEN WE CHANGE A PO, a new entry of Message output appears in "YELLOW"
    Here is the issue - Now when we manually change the timing from "3" to "4", initially it appear's "4",
    but if u refer the below screenshot - once we save the application i turns back to 3.
    any idea - why this is happening.
    Thanks in advance.
    Regards,
    Rohit

    Hi,
    1st  make sure  which Dispatch time you want for your PO layout and restrict changing dispatch time manually in PO.
    Now use t.code:NACE, with application EF for your PO message type, Keep Dispatch time 4 in ‘Default values’ TAB  and select check of “CannotBeChanged” in Basis Data TAB and save.
    Maintain message condition record in t.code:MN04 with PO message type and keep Dispatch time 4.
    Now create PO , try to change Dispatch time  and see how system behave!
    Regards,
    Biju K

  • Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

    Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • My 3GS is responding MESSAGE SEND FAILURE when I attach n send photos. Why? And how do I fix it?

    Just started getting a MESSAGE SEND FAILURE response when I attach n send a photo with my texts. Why? How do I fix it?

    Did you try what was suggested on that page i.e. disconnecting the iPad from your computer and turning the iPad off (press and hold the sleep/wake button until the red 'slide to power off' appears on screen and slide that) and then back on ?
    And if the backup doesn't work after that then try a soft-reset instead of the off and on : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015. SQL 2012 SP1

    Hi,
    Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
    I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
    TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
    The following error has occurred:
    The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'. 
    Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
    Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
    is not a possible owner of the resource.
    For help, click:
    http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
    BUTTONS:
    OK
    I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
    Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
    application SQL Server SG1DB. Could not move the resource to available storage. An error occured
    while moving the resource BCK_SG1DB to the clustered service or application Available Storage
    Any ideas why it failed or how could I delete the SQL server instance from Clauster?
    Thx

    Hello,
    Please read the following resource.
    https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

    Hi Planning installation Gurus,
    Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
    OS: Vista Premium
    SQL Server 2005
    Essbase:9.3.1
    Error Message: "System Failure: Error while retrieving xml file from database"
    Details of error:::::::::::::::::::::::::
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    Pls provide Solution

    Hi John,
    though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=windowsAuthentication
    SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
    SYSTEM_DB_CATALOG=plandb
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    my steps:
    Using SQL Server Management Studio
    Changed Widows authentication to SQL server authentication mode
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    To restart SQL Server from SQL Server Management Studio
    To enable the sa login by using Management Studio
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.}}}
    anything else should i change.................

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • Message output(IDoc) from MIGO creates multiple idocs repeats for each line

    Hi Experts,
    We want to send one idoc message thru MIGO output message control upon posting at HEADER level regardless of how many line items are there on the Purchase Order.
    Using MIGO we are doing a 101 goods receipt on a PO with 3 line items and we are getting 3 idocs created with the same information form the message output control(basically it is at item level).
    I don't know if this is how standard SAP designed the MM message output control.
    From MIGO or MB03 there is no option to display the messages at the header level because you have to go thru the line item details to see the messages
    I have also tried the collective slip option on MIGO and it did not work(help suggests that it will combine everything in one output)
    Can you please let me know if there is a config or development that needs to made on controling the message output at the header level from MIGO.
    Thanks for all your help
    Shraj

    Hi Sri hari Raju.
    Did you solve this problem?
    Can you tell me how?
    Thanks

  • How to configure ME38 and Message Output

    topic:EDI in procurement - delivery forecast  (DELINS)
    ME38 - ERROR:Output LPH1 for partner  cannot be processed 
    How would I configure the same in ME38 and the resultant PrintOuts and EDI messages?
    I've had a look in SPRO, andthis is the standard step by step procedure for Message determination that I done in SPRO:
    SPRO > Material Management-> Purchasing -> Message -> Output Control->MESSAGE TYPE->Maintain
    Message Types for Forecast Delivery Schedule/Expediter ->OK
    109-LP->EL document
    SPRO > Material Management-> Purchasing -> Message -> Output Control-> Maintain Requirements for
    Message Control
    LPH1->109
    SPRO > Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message
    Type-> Define Partner Roles for Scheduling Agreement Release/Exped
    LPH1-6->OA
    WE20
    SPRO > Material Management-> Purchasing -> Message -> Output Control-> EDI->Set Up Partner Profile
    defined Partner LI, message DELINS
    SPRO > Material Management-> Purchasing -> scheduling agreements->set up stock transport sc.ag-> maint.REL.crea.profile for sc.agr.w rel.docu
    MN12
    LPH1-doc.Type-PurchORG-Vendor
    ME32L
    in Additional DATA      -> Scheduling Control (Firm zone=90&TradeOff-Zone=90
                   -> output control -> Plant-Profile
    ME38
    create schedules
    ME84
    run
    but in ME38 don't exist the message iDoc "LPH1"
    if I tried to create manually the system show the following message:ù
    OUTPUT LPH1 for partner cannot be processed
    message n.VN043
    Diagnosis                                                                  
        The proposed output cannot be processed. You can only display details.
    but I am not an MM configuration specialist (we don't have one at our company at present) and am therefore a little lost, any / all help appreciated.
    Best Regards
    Antonio Giovanniello

    Hi
    have you maintained the Partner Profile for the Partner role OA in the Outbound Parameters. Please maintain
    Thanks & Regards
    Kishore

  • In the past month or so my iPhone 5 battery is dying in hours, whereas it used to last all day at least.  Also, I am getting constant "message send failures" when texting and frequent dropped phone calls.

    Just recently my Iphone 5 battery is dying in a just a few hours, it used to last all day or more.  I'm not doing anything different with it, although I have started shutting down apps etc. to conserve battery.  I get constant "message send failures and frequently dropped phone calls. 

    My best bet would be to restore the phone. Back it up to itunes, and then reset it Factory settings. This way, any corrupt software will be removed, and you can start fresh. Make sure you back it up first. By the sounds of it, you are using the phone for business and probably need the data from it. Hope this helps!

  • Message output for New Purchase Order Document type

    Hi experts,
    I am having trouble getting a Print message output for a New Purchasing Document type that I created.
    Steps that I followed are:
    1.Created a new Document type NS via customizing.
    2.Assigned the new Purchasing Document Type NS to Output Type NEU which is linked to our customized form for Purchase order display. I used MN04 /NACE to do this step.
    Now the message output gets created for my new document type NS but I am unable to display the message.
    Notes:
    -There are no release stratergies in place for document type NS
    -The NEU format works fine the other document type NB which we use for Standard POs.
    Are there any steps I have missed? Please help to resolve the issue.
    Arosh.

    Goto NACE select application  EF Purchase Order then goto condition record NEU select condition record select the last key combination "Purchasing Output Determination: Document Type"
    here enter your doc. type execute
    maintain the condition record
    NS  VN(function)   1 3 EN and click on communication and maintain
    Or goto NACR here put EF and NEU and select the last combination "Purchasing Output Determination: Document Type"
    maintain ..
    NS  VN(function)   1 3 EN and click on communication and maintain
    Hope it helps..

  • Message Output for purchase order

    Dear SAP Expert,
    We have defined the message output type for purchase order document type XX with special function. We have maintained condition record for the same. It is working fine.
    Now we have defined another output type for another PO document type YYwith special function by copying earlier one.
    But message output is not genarated in case of YY document type.
    Please tell us what we have missed out.
    Thanks & Regards,
    Reva.

    Hi Reva,
    In ME22N for your PO, click on the Messages button. Then click on the blue information button - this should display the output determination analysis for the order, and will show you which output determination procedure was used, which output type and access sequence was processed and whether the system was able to find a matching record. At the lowest level of detail it will show you the keys that were used to read the condition records. All this information should help you to determine why a condition record could not be found for the purchase order.
    Regards,
    Monika

  • Message Output Type for PO

    Hi Experts,
    Can anybody please provide me the step wise details for message output type creation for purchase order.
    Thanks in advance.
    Regards,
    D Ranjan

    Hi,
    Refer this
    Re: output determination for PO and MIGO
    Re: No message generated for output of purchasing document
    PO -OutPut Determination
    and
    Do the following settings in sequence:
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Let me know if u required any thing else.

  • Message output for PO

    Hi,
    I am doing configuration setting for Message output control for purchase order.
    Can I do setting through  NASC Tcode or SPRO>>MM>>purchase>> output control?
    (In real time through which process configuration settings will be done)
    What is the interlink between Smart form, Program, from routine & Type
    Regards
    Sunil

    Go to NACE Trxn Code and check "EF" details

  • Message Send Failure - Only in one location

    When sending MMS to ANYONE in my home town, It never goes through and results in a "Message Send Failure". Every once in a while it MIGHT work. I have full bars.. in fact, I can see the tower from my back yard with a clear line of sight. it's right next to my house. But it's only in this location. If i drive 10 mins down the road into the next town, where they have 3G... the picture goes through no problem. I can be in that other town, turn off 3G and just be on Edge.. and still.. the message and picture go right through.
    Is this possibly a problem with the tower in my back yard? All my calls are crystal clear... just data seems to stink. I can surf the web rather slowly.. but all my text messages that have Multimedia attached never work. And this is with every OS version since the 3gs was released.

    any help here, friends?

Maybe you are looking for

  • Join in update statement

    can we use join in update statement? here is the query which is giving me error UPDATE      pol_int_name_multiple_v SET      PMV.client_seq_nbr_i = 1 FROM     pol_int_name_multiple_v PMV JOIN      pol_int_name PIV ON      piv.int_name_id = pmv.int_na

  • Getting Music off of Ipod Touch

    My computer crashed and the hard drive had to be replaced. I foolishly didn't have any of my music backed up. I have all my music and movies still on my Ipod Touch. Is there any way I can get my music off my Ipod, and onto a external drive, so that w

  • Bluetooth a2dp/avrcp

    Ever since a week after the first Iphones were released (when I bought my first one), I've been waiting for Iphone to support bluetooth a2dp/avrcp. I bought a 3G-S yesterday. I have 3 different a2dp/avrcp products I've paired it with: my Sony car ste

  • Regarding ABAP Query related

    Hi,   Can any body tell me how to keep query related data in internal table? Regards, Suresh Kumar.

  • Hide Album Artwork from Lock Screen

    I am wondering if there is a way to hide the album art work from my lock screen?