Message problem in BDC

Hi All,
I am doing a bdc program inside RFC-FM.in which i need to do a posting in FI and return the document number via the export parameter of the RFC-FM.when the function module is tested in
foreground its giving me the document number via the success message but while testing in background mode the document number is not captured.I think there is some problem withe message capturing in background mode.
can anybody advice.....
Regards,
Prajith

Hi
I do not think so it is due to Background.
Sometimes if the BDC recording is not done properly, it will not work in MODE 'N'. it will work only in MODE 'A'.
I would suggest to take the code inside the RFC and place it in a ZREPORT and check.
If the problem still exists, than i suggest to do re-recording of the transaction
Regards
Madhan D

Similar Messages

Problem with BDC on VA02

Hi All,
I am facing a problem with bdc on va02. After hitting enter on the first screen it pops an info message "consider subsequent douments". It doesn't get recorded in recorded. Hence I am not able to run the transaction with no screen mode. Please help me to suppress the info message
Navin

Hi Navin,
These kind of messages and pop ups are precisely the reason why use of BDC for updating transactions is NOT advisable.
If you were to bypass such messages, you would have to put a check to see why the message appears (in this case probably because the sales document flow for the sales order in table VBFA has some documents) and then write a logic to either handle the message or not.
Instead i would recommend you use the BAPI functions provided by SAP to change the sales order.
Have a look the BAPI for sales order change attached to the business object BUS2012. For this goto transaction SWO1 and enter the BUS2012 business object. Then goto methods and look for the "change" method. Double click on the method and look at the BAPI used to implement the method. Go ahead and use this method in your program as against a BDC.
I am sure it will be a much better option.
Otherwise if you still want to proceed with a BDC, please debug at the point where the message/pop up appears to ascertain reason for the same and then incorporate the same check in your program to handle the pop up.
Regards,
Aditya

Problem in BDC Background

Hi
I am facing a problem in BDC ,call trasaction, for FB01
While the recording is done, the confi has BSEG-DMBTR field (Local Currecny)
and now its not there is the screen.
If i run my BDC is foreground, it says Field does not exist as sucess message and then i press enter and it let me post the record.
But in Background, its not letting me post the document.
wether its because , in background if any screen elements is message , being a succes message, it doesnot post ?
please help

Hi Munish singh,
Actually this error because of currency field.
1) declare the character variable equal to the dmbtr field output length. ex: data: v_dmbtr type c length 18.
2) before passing to the screen field.
3) move itab-dmbtr to v_dmbtr.
condence v_dmbtr.
4) And pass this v_dmbtr to the screen field ....
then your issue positively will resolved.
Dont forgot to Reward me points .....
All the very best....
Regards,
Sreenivasa sarma K.

Problem in bdc PROG

Dear All,
            Iam facing the problem in BDC Program..the code is..
LOOP AT IT_RECORD.
perform bdc_dynpro      using 'SAPMF05A' '0300'.
perform bdc_field       using 'BDC_CURSOR' 'RF05A-NEWKO'.
perform bdc_field       using 'BDC_OKCODE' '/00'.
perform bdc_field       using 'BSEG-WRBTR'                IT_RECORD-vramt. "'100000'.
perform bdc_field       using 'RF05A-NEWBS'                          it_record-pkey. "'50'.
perform bdc_field       using 'RF05A-NEWKO'                          it_Record-vrac. "'24450024'.
perform bdc_field       using 'DKACB-FMORE'                          'X'.
perform bdc_dynpro      using 'SAPLKACB' '0002'.
perform bdc_field       using 'BDC_CURSOR' 'COBL-GSBER'.
perform bdc_field       using 'BDC_OKCODE' '=ENTE'.
perform bdc_field       using 'COBL-GSBER'                            it_record-gsber. "'KABA' .
COUNT = COUNT + 1.
WRITE:/ COUNT.
IF COUNT = 4.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                                'BSEG-GSBER'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'BSEG-WRBTR'                        IT_RECORD-VRAMT.   "'50000'.
perform bdc_field       using 'BSEG-MWSKZ'                           '**'.
perform bdc_field       using 'BSEG-GSBER'                        IT_RECORD-GSBER ."'kaba'.
perform bdc_field       using 'BSEG-ZFBDT'                           '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                                'BSEG-WRBTR'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BS'.
perform bdc_field       using 'BSEG-WRBTR'                          IT_RECORD-VRAMT. "'50,000.00'.
perform bdc_field       using 'BSEG-MWSKZ'
perform bdc_field       using 'BSEG-BUPLA'                            '1800'.
perform bdc_field       using 'BSEG-GSBER'                            IT_RECORD-GSBER."'KABA'.
perform bdc_field       using 'BSEG-ZFBDT'                            '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0700'.
perform bdc_field       using 'BDC_CURSOR'
                                'RF05A-NEWBS'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BU'.
CALL TRANSACTION 'F-02' USING BDCDATA MODE 'A'.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
here iam using 4 line item(in text file) ..if count = 4 its not going to next screen, its repeating..its not simulating and posting the doc..
pls guide me friends.

hi i send the code here, if u can understand clear it..
report ZBDC_FI_MVF_02 no standard page heading line-size 255.
DATA : BEGIN OF IT_RECORDS OCCURS 0,
       BLDAT LIKE BKPF-BLDAT,
       BLART LIKE BKPF-BLART,
       BUKRS LIKE BKPF-BUKRS,
       BUDAT LIKE BKPF-BUDAT,
       MONAT LIKE BKPF-MONAT,
       WAERS LIKE BKPF-WAERS,
       NEWBS LIKE RF05A-NEWBS,
       NEWKO LIKE RF05A-NEWKO,
       END OF IT_RECORDS.
DATA : BEGIN OF IT_RECORD OCCURS 0,
       VRAMT(15), " LIKE BSEG-WRBTR,
       PKEY LIKE RF05A-NEWBS,
       VrAC(10), " LIKE RF05A-NEWKO,
       GSBER LIKE COBL-GSBER,
       END OF IT_RECORD.
DATA : BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       DATE1 LIKE SY-DATUM,
       DATE2 LIKE SY-DATUM,
       LOOP(3).
       DATA : COUNT(3).
start-of-selection.
PERFORM GET_DATA1.
PERFORM GET_DATA2.
PERFORM PROCESS_DATA.
FORM PROCESS_DATA.
perform bdc_dynpro      using 'SAPMF05A' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-NEWKO'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
    date1 = it_RecordS-bldat.
    CONCATENATE DATE16(2) DATE14(2) DATE1+0(4) INTO DATE1.
perform bdc_field       using 'BKPF-BLDAT'               DATE1. "'03.12.2007'.
perform bdc_field       using 'BKPF-BLART'               IT_RECORDS-BLART. "'SA'.
perform bdc_field       using 'BKPF-BUKRS'               IT_RECORDS-BUKRS. "'1800'.
    date2 = it_RecordS-bUdat.
    CONCATENATE DATE26(2) DATE24(2) DATE2+0(4) INTO DATE2.
perform bdc_field       using 'BKPF-BUDAT'               DATE2. "'03.12.2007'.
perform bdc_field       using 'BKPF-MONAT'               IT_RECORDS-MONAT. "'9'.
perform bdc_field       using 'BKPF-WAERS'               IT_RECORDS-WAERS. "'INR'.
perform bdc_field       using 'FS006-DOCID'              '*'.
perform bdc_field       using 'RF05A-NEWBS'               IT_RECORDS-NEWBS. "'40'.
perform bdc_field       using 'RF05A-NEWKO'               IT_RECORDS-NEWKO. "'24450024'.
*perform bdc_field       using 'RF05A-NEWBS'               IT_RECORDS-PKEY. "'50'.
*perform bdc_field       using 'RF05A-NEWKO'               IT_RECORDS-VENAC. "'24450024'.
*perform bdc_field       using 'DKACB-FMORE' 'X'.
COUNT = '0'.
LOOP AT IT_RECORD.
perform bdc_dynpro      using 'SAPMF05A' '0300'.
perform bdc_field       using 'BDC_CURSOR' 'RF05A-NEWKO'.
perform bdc_field       using 'BDC_OKCODE' '/00'.
perform bdc_field       using 'BSEG-WRBTR'                IT_RECORD-vramt. "'100000'.
perform bdc_field       using 'RF05A-NEWBS'                          it_record-pkey. "'50'.
perform bdc_field       using 'RF05A-NEWKO'                          it_Record-vrac. "'24450024'.
perform bdc_field       using 'DKACB-FMORE'                          'X'.
perform bdc_dynpro      using 'SAPLKACB' '0002'.
perform bdc_field       using 'BDC_CURSOR' 'COBL-GSBER'.
perform bdc_field       using 'BDC_OKCODE' '=ENTE'.
perform bdc_field       using 'COBL-GSBER'                            it_record-gsber. "'KABA' .
COUNT = COUNT + 1.
IF COUNT = 4.
clear count.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                                'BSEG-GSBER'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'BSEG-WRBTR'                        IT_RECORD-VRAMT.   "'50000'.
perform bdc_field       using 'BSEG-MWSKZ'                           '**'.
perform bdc_field       using 'BSEG-GSBER'                        IT_RECORD-GSBER ."'kaba'.
perform bdc_field       using 'BSEG-ZFBDT'                           '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                                'BSEG-WRBTR'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BS'.
perform bdc_field       using 'BSEG-WRBTR'                          IT_RECORD-VRAMT. "'50,000.00'.
perform bdc_field       using 'BSEG-MWSKZ'
perform bdc_field       using 'BSEG-BUPLA'                            '1800'.
perform bdc_field       using 'BSEG-GSBER'                            IT_RECORD-GSBER."'KABA'.
perform bdc_field       using 'BSEG-ZFBDT'                            '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0700'.
perform bdc_field       using 'BDC_CURSOR'
                                'RF05A-NEWBS'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BU'.
CALL TRANSACTION 'F-02' USING BDCDATA MODE 'A'.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                               'BSEG-GSBER'.
perform bdc_field       using 'BDC_OKCODE'
                               '/00'.
perform bdc_field       using 'BSEG-WRBTR'                '50000'.
perform bdc_field       using 'BSEG-MWSKZ'                '**'.
perform bdc_field       using 'BSEG-GSBER'                'kaba'.
perform bdc_field       using 'BSEG-ZFBDT'                '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                               'BSEG-WRBTR'.
perform bdc_field       using 'BDC_OKCODE'
                               '=BS'.
perform bdc_field       using 'BSEG-WRBTR'                IT_RECORD-VRAMT. "'50,000.00'.
perform bdc_field       using 'BSEG-MWSKZ'                '**'.
perform bdc_field       using 'BSEG-BUPLA'                '1800'.
perform bdc_field       using 'BSEG-GSBER'                IT_RECORD-GSBER. "'KABA'.
perform bdc_field       using 'BSEG-ZFBDT'                '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0700'.
perform bdc_field       using 'BDC_CURSOR'
                               'RF05A-NEWBS'.
perform bdc_field       using 'BDC_OKCODE'
                               '=BU'.
perform bdc_transaction using 'F-02'.
*CALL TRANSACTION 'F-02' USING BDCDATA MODE 'A'.
ENDFORM.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> ' '.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.
*&      Form GET_DATA
form GET_DATA1 .
CALL FUNCTION 'UPLOAD'
   EXPORTING
     FILENAME                      = 'C:\MVF-02_1.txt'
     FILETYPE                      = 'DAT'
    TABLES
     data_tab                      = IT_RECORDS
   EXCEPTIONS
     CONVERSION_ERROR              = 1
     INVALID_TABLE_WIDTH           = 2
     INVALID_TYPE                  = 3
     NO_BATCH                      = 4
     UNKNOWN_ERROR                 = 5
     GUI_REFUSE_FILETRANSFER       = 6
     OTHERS                        = 7.
IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
     WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " GET_DATA
*&      Form GET_DATA2
form GET_DATA2 .
CALL FUNCTION 'UPLOAD'
   EXPORTING
     FILENAME                      = 'C:\MVF-02_2.TXT'
     FILETYPE                      = 'DAT'
    TABLES
     data_tab                      = IT_RECORD
   EXCEPTIONS
     CONVERSION_ERROR              = 1
     INVALID_TABLE_WIDTH           = 2
     INVALID_TYPE                  = 3
     NO_BATCH                      = 4
     UNKNOWN_ERROR                 = 5
     GUI_REFUSE_FILETRANSFER       = 6
     OTHERS                        = 7
IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
     WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " GET_DATA2

Continuing the "status message problems" issue...

in response to ralph johns suggestion to delete the buddy list file from my library to solve the outdated status message problem...
RJ- haha.. i'm not sure i'm going to try the "beat it with a stick" approach quite yet.. i think i found out whats causing the problem. when i would use iChat on campus using our school's wireles, i didnt have the problem of outdated status messages. but when i come home, i do.. and i believe the reason is because i'm using a Belkin G Wireless router. although i do hard line, i'm almost positive this is the problem. i did some research online and it isnt one of the approved routers for iChat.
so is my only option to buy a new compatible router to solve the problem? or is there somewhere i can go that can tell me what ports to open for a belkin router?? we're getting close... i can feel it!!! haha thanks..
-brent

Hi Anders,
in order to quickly fix that problem, I would just adapt the provisioning function where the warning shows up and make sure that the function uError is called so that an error is created instead of a warning.
Are you using the SAP Provisioning Framework or a custom provisioning framework. Which repository are you using?
Best regards
Holger

Problem in BDC Recording

Hi I am having a problem in BDC Recording. My requirement is that when I input data in transaction fb02 to block the invoices, It shows a list of invoices. Now i need to double click that item(line) in which PK = 06 at runtime during bdc recording. During BDC recording it takes the line number on which we have clicked which is constant but i want it dynamic that if item 1 is having PK=6, that line should be double clicked and if item 3 is having PK=6, the third item should be double clicked to open another screen. Kindly help me... Thanks in advance.

Hi Ravi,
While writing your code that is in your code you know which line number is having the PK = 06, then you can use the same line number and add the code for double click after that.
Regards,
Atish

Problem in bdc session method for tcode FS00

Hi Experts,
problem in bdc session method, when i run this program no output is shown.
Even it is not calling the transaction.
code as follows.
*& Report Z_GL_MASTER
*& CATEGORY         = BDC.
*& DESCRIPTION      = UPLOADING G/L MASTER RECORDS.
*& TECHNICAL CONST = FRANCIS REDDY.
*& FUNTIONAL CONST = FICO.
REPORT Z_GL_MASTER.
*& Internal Table
DATA : BEGIN OF IT_UPLOAD OCCURS 0,
       SAKNR LIKE GLACCOUNT_SCREEN_KEY-SAKNR,          " ACCOUNT NUMBER.
       BUKRS LIKE GLACCOUNT_SCREEN_KEY-BUKRS,          " COMPANY CODE.
       KTOKS LIKE GLACCOUNT_SCREEN_COA-KTOKS,           " ACCOUNT GROUP.
       XPLACCT LIKE GLACCOUNT_SCREEN_COA-XPLACCT,       " P&L STATEMEMENT.
       GVTYP LIKE GLACCOUNT_SCREEN_COA-GVTYP,          " P&L STATEMENT TYPE.
       XBILK LIKE GLACCOUNT_SCREEN_COA-XBILK,           " BALANCE SHEET STATEMENT
       SHORT LIKE GLACCOUNT_SCREEN_COA-TXT20_ML,        " SHORT TEXT.
       LONG LIKE GLACCOUNT_SCREEN_COA-TXT50_ML,         " LONG TEXT.
       WAERS LIKE GLACCOUNT_SCREEN_CCODE-WAERS,         " ACCOUNT CURRENCY.
       XSALH LIKE GLACCOUNT_SCREEN_CCODE-XSALH,         " ONLY BALANCES IN LOCAL CURRENCY.
       MITKZ LIKE GLACCOUNT_SCREEN_CCODE-MITKZ,         " RECONCILATION ACCOUNT FOR ACCOUNT TYPEGLACCOUNT_SCREEN_CCODE-MITKZ
       XOPVW LIKE GLACCOUNT_SCREEN_CCODE-XOPVW,         " OPEN ITEM MANAGEMENT.
       XKRES LIKE GLACCOUNT_SCREEN_CCODE-XKRES,         " LINE ITEM DISPLAY.
       ZUAWA LIKE GLACCOUNT_SCREEN_CCODE-ZUAWA,         " SORT KEY.
       FSTAG LIKE GLACCOUNT_SCREEN_CCODE-FSTAG,         " FIELD STATUS GROUP.
       XGKON LIKE GLACCOUNT_SCREEN_CCODE-XGKON,         " RELAVENT CASH FLOW.
       END OF IT_UPLOAD.
*& Internal Table FOR BDC DATA.
DATA : IT_BDCDATA TYPE BDCDATA OCCURS 0 WITH HEADER LINE.
*& DATA DECLARATIONS.
DATA : V_FILE LIKE RLGRAP-FILENAME.
*& SELECTION SCREEN.
PARAMETER : P_FILE LIKE V_FILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
     PERFORM GET_FILENAME.
START-OF-SELECTION.
      PERFORM UPLOAD_DATA.
      PERFORM BDCDATA_OPEN.
      PERFORM BDC_POPULATE.
      PERFORM BDC_CLOSE.
*&      Form GET_FILENAME
form GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     PROGRAM_NAME        = SYST-CPROG
     DYNPRO_NUMBER       = SYST-DYNNR
     FIELD_NAME          = 'P_FILE'
   IMPORTING
     FILE_NAME           = P_FILE.
endform.                    " GET_FILENAME
*&      Form UPLOAD_DATA
form UPLOAD_DATA .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = P_FILE
   FILETYPE                      = 'DAT'
TABLES
    data_tab                     = IT_UPLOAD.
endform.                    " UPLOAD_DATA
*&      Form BDCDATA_OPEN
   FORM FOR BDC_OPEN_GROUP.
form BDCDATA_OPEN .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
   CLIENT                    = SY-MANDT
   GROUP                     = 'GLMASTER'
   HOLDDATE                  = SY-DATUM
   KEEP                      = 'X'
   USER                      = SY-UNAME.
endform.                    " BDCDATA_OPEN
*&      Form BDC_POPULATE
POPULATING BDC DATA .
form BDC_POPULATE .
loop at it_upload.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=ACC_CRE'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_KEY-SAKNR'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-SAKNR'    IT_UPLOAD-SAKNR.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-BUKRS'    IT_UPLOAD-BUKRS.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_GROUP'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-KTOKS'    IT_UPLOAD-KTOKS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XPLACCT' IT_UPLOAD-XPLACCT.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_BS_PL'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-GVTYP'    IT_UPLOAD-GVTYP.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XBILK'    IT_UPLOAD-XBILK.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-TXT20_ML'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT20_ML' IT_UPLOAD-SHORT.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT50_ML' IT_UPLOAD-LONG.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB02'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-WAERS' IT_UPLOAD-WAERS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XSALH' IT_UPLOAD-XSALH.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-MITKZ' IT_UPLOAD-MITKZ.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XOPVW' IT_UPLOAD-XOPVW.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XKRES' IT_UPLOAD-XKRES.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA' IT_UPLOAD-ZUAWA.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB03'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-FSTAG' IT_UPLOAD-FSTAG.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XGKON' IT_UPLOAD-XGKON.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
    TCODE                  = 'FS00'
   TABLES
     dynprotab              = IT_BDCDATA.
endloop.
endform.                    " BDC_POPULATE
*&      Form BDC_CLOSE
FORM FOR CLOSING BDC_GROUP
form BDC_CLOSE .
CALL FUNCTION 'BDC_CLOSE_GROUP'.
endform.                    " BDC_CLOSE
*&      Form BDC_SUB1
   FORM FOR BDCDATA.
form BDC_SUB1   USING A B C.
CLEAR IT_BDCDATA.
IT_BDCDATA-DYNBEGIN = A.
IT_BDCDATA-PROGRAM = B.
IT_BDCDATA-DYNPRO =   C.
APPEND IT_BDCDATA.
endform.                    " BDC_SUB1
*&      Form BDC_SUB2
      text
form BDC_SUB2   USING A B.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = A.
IT_BDCDATA-FVAL = B.
APPEND IT_BDCDATA.
endform.                    " BDC_SUB2
Points will be rewarded.
Thanks in advance.
Francis.

Hi,
Once the program is executed..It will a BDC session..
THen you have to use the transaction SM35..To process the BDC session..
Thanks,
Naren

"Blocked plug-in message" problem on my OS X 10.6.8. (Safari's 5.1.10). Any solutions for a non-techie (step 3 on Adobe Flash's instructions leads to dead end). Thanks.

"Blocked plug-in message" problem on my OS X 10.6.8 (Safari's 5.1.10). Any solutions for a non-techie (step 3 on Adobe Flash's instructions leads to dead end, i.e. product for sale). Thank you.

Prior to updating flash player, you must first uninstall all previous versions. Make sure you are downloading from the proper Adobe website = Adobe Flash Player Software
Flash Player Uninstaller
Repair permissions and restart your computer after the installations.

HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Syntax problem with BDC perform

Dear Friends,
small problem in BDC Perform syntax but I am not getting how to do this..
I have writen the code like this in my BDC byt its throughing the error...Here I want to do the validation on each and every field. I mean If that field values are empty i don't want to change the SAP field value.
my code is like this.
    PERFORM dynpro USING:
    'X' 'SAPLMGMM' '0080'.
    IF NOT p_int_matl-werks IS INITIAL.
    ' ' 'RMMG1-WERKS' p_int_matl-werks.
    ENDIF.
    IF NOT p_int_matl-werks IS INITIAL.
    ' ' 'RMMG1-LGORT' p_int_matl-lgort.
      ENDIF.
    ' ' 'BDC_OKCODE' '/00'.
pls give me exact code how to do this...
Thanks
Sridhar

Hi sridher,
1. this kind of syntax ie. IF will give error.
2. If ur requirement is : blank value should not be put in bdc,
3. then one way is to change / write the logic
    inside the form itself.
4. ie. inside the routine/form DYNPRO.
5. So, it will be then general for all performs.
regards,
amit m.

I get message, Problem scanning. Something went wrong. Please try again.

My printer was working fine when scanning, but now I get a message:
Problem scanning. Something went wrong. Please try again. I turned my printer off, rebooted my computer...updated the printer from hp website...but nothing. I can see the document in preview, and I hear the scanner working. HELP!!

Hey there @leandermw , Welcome to the HP Forums
I understand you're having scanning problem with your Deskjet 2540, on Windows 8.1 and would like to help you.
I would first suggest that you run the Print and Scan Doctor, and choose "fix scanning" to see if the tool can correct the issue. Send me the results in your reply as well.
If you have the printer connected to a network, either wireless or ethernet, try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer and try scanning.
You can also power reset the printer itself:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Try scanning from the HP scan software on your computer, and also make a copy from the front of the printer.
Write me back with the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem in BDC while going back to previous screen in FB60

Dear All,
    I have a problem in BDC my BDc stops when it tries to go back to previous screen then manually i have to click on the back button then it gets posted. the previous screen recording for FB60 is
SAPMSSY0     0120     X
BDC_CURSOR     16/32
                                                            BDC_OKCODE     =&IC1
When we do back by clicking on the screen is not getting recorded. Kindly suggest a suitable Solution for the same.
Reagrds

FB60 is an EnjoySAP transaction and not well suited to batch input (look for notes). Better to use a BAPI or batch input on FB01.
Rob

Problem in BDC for F-32

Hi Experts,
I m facing a problem while doing the BDC for F-32, i want to make Normal OI check field as Uncheck through BDC , while recording i have uncheck the check box and the field value appears to be ' ' in the recording , but when i process the BDC the field remains CHECKED by Default.
pls help how can i unchecked the field.
I have tried it by puting the value of the field 'X' also but still it remains checked .
pls help me how can i UNCHECKED the Normal OI screen field .

Hi
The output format of an amonut is managed by the currency, you shouldn't have any particular problem,
In BDC program the field to be used to transfer the amount has to be char, so probably the easier solution is to write it into the bdc field in according to the currency:
WRITE <AMOUNT> CURRENCY <CUURENCY> TO <BDC FIELD>.
Max

Problem in BDC for F-02 -- Currency Problem

Dear Experts,
I have written a BDC for F-02 to upload the opening balances of vendors.
Problem is , this BDC is for Libya country, where decimal places is 3.
Now when i run my BDC, if the amount is 22.54, it will upload it as 22.540, which is ok, but if the amount is 22.543, it upload it as 22.540 instead of 22.543.
can one provide some guidance in this....
Regards,
Maverick

Hi
The output format of an amonut is managed by the currency, you shouldn't have any particular problem,
In BDC program the field to be used to transfer the amount has to be char, so probably the easier solution is to write it into the bdc field in according to the currency:
WRITE <AMOUNT> CURRENCY <CUURENCY> TO <BDC FIELD>.
Max

Problem from BDC

Hi all,
1) i got a problem in BDC i.e suppose i have a flat file that is having 10 records
but my problem is i want to update first 8 records only using Call transaction
so where will do this and what is the logic for this . for both cases i.e Call transaction & session methods?
good rewards for replay,
regards,
sudharsan

Once you upload the file into an internl table,
delete the last two rows from the internal table.
call function GUI_UPLOAD
describe table itab lines v_lines.
delete table itab index v_lines.
v_lines = v_lines - 1.
delete table itab index v_lines.
then do your call transaction or BDC session method.
Regards,
Ravi

Message problem in BDC

Similar Messages

Maybe you are looking for