Message queue updates

Hi,
Using server 2003 R2 service peck 2.
We're having a problem with a msmq application that works on a slightly different environment with less wsus updates.
i need a list of all the updates related to msmq so i could compare the 2 environment.
please advise ASAP.
thanks.

Hello Lotam_eden,
Thanks for your patience.
Here are the updates related to Message Queuing on Windows Server 2003.
===============================================
1. KB 2494629
A "0x0000008E" Stop error occurs when you set the message storage limit for a Message Queuing queue to be larger than 4 GB in a 32-bit version of Windows Server 2003
http://support.microsoft.com/kb/2494629
2. KB 2028919
A Message Queuing 3.0 message is rejected by the receiver when you send the message by using an external certificate in Windows Server 2003 SP2
http://support.microsoft.com/kb/2028919/en-us
3. KB 971032
Vulnerability in Message Queuing could allow elevation of privilege
http://support.microsoft.com/kb/971032/en-us
4. KB 970122
You cannot use Message Queuing 3.0 to send messages over HTTPS if the Federal Information Processing Standard (FIPS) is enabled in Windows Server 2003
http://support.microsoft.com/kb/970122/en-us
5. KB 961605
Multicast messages larger than 64 kilobytes (KB) are not delivered as expected by using Message Queuing 3.0 after security update MS08-036 is installed
http://support.microsoft.com/kb/961605/en-us
6. KB 941560
A general protection fault (GP fault) error occurs when you restart an outgoing queue in Microsoft Message Queuing 3.0
http://support.microsoft.com/kb/941560/en-us
7. KB 934318
The Lsass.exe process may use a high percentage of CPU resources when you run Message Queuing on a domain controller with global catalog
http://support.microsoft.com/kb/934318/en-us
8. KB 928380
9. KB 922667
10. KB 917399
11. KB 916133
12. KB 908926
13. KB 902951
14. KB 899470 ......
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Java Message Queue 3.7 Update 2

Hi,
I am looking for an older version of the Java Message Queue Version 3.7 Update 2. I amunable to find thiss on the download site.
Can any one direct me as to where I could get this from?
Thanks,
Ashwin

Hi Ashwin,
I'm afraid this isn't the forum for Java Message Queue. It is the forum for Oracle MessageQ, a different product altogether. I'm not sure which forum covers Java Message Queue.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Problem with GlassFish and Sun Java System Message Queue

Hi,
I used application server PE.8 and I upgraded to Sun Java System Application Server Platform Edition 9.0 Update 1 Patch 1, and I changed all my CLASSPATH and everything. My system is working fine, but the Sun Java System Message Queue that I used before is still showing the queues and physical queues of the previous application server, not the new one. Do you know if there is way to change that and link it to the new version?
thanks

Use an ESB like ServiceMix to bridge JMS providers
http://servicemix.org/
Or write your own MessageListener to consume from one JMS and publish on another one. Be careful with queues to avoid loosing the ordering - so you probably want to use a single MessageListener per subscription/queue - or to take advantage of Tibco's exclusive queues to ensure ordering is preserved. If ordering doesn't matter then don't worry too much about it and maybe have a pool of consumers to improve throughput
James
http://logicblaze.com/

Can we peek into System V message queue?

Hi, there.
I have to processes A and B, talking through system v message
queue. For debugging purposes, I wish to attach a third
process C to that message queue and print out what info
process A and B are exchanging.
Is that possible?
thanks

It is starting in Solaris 8, Update 2 (The 10/00 release), but not previously.
man msgsnap(2) for all the gory details.

Dead message queue

Intial information:
SUN MQ 4.3
Local installation
Purpose: use dead message queue.
As per refered in SUN MQ admin guide have updated the broker
imqcmd update dst -t q -n TestQueue1 -o useDMQ=true
imqcmd update dst -t q -n TestQueue1 -o MaxBytesPerMsg=150000
Also java program sending message to the queue and data is of size 171KB(171000)
With above setting I expect the message to go to mq.sys.dmq, however its not? Any one have answer?
Or any one have used dead message queue with SUN MQ?
Any help will be appreciated.
Madhav
Edited by: user10111912 on Jan 20, 2011 4:18 PM

In this case, the message will be rejected, that is it does not get into the destination, which is different from a message in the destination becomes "dead" - dead message.

Exchange 2010 - PerfMon - Messages Queued for Delivery = 2,147,483,649

Our monitoring system is alerting Messages Queued for Delivery as 2 Billion messages and the value returned by PerfMon > MSExchangeTransport Queues > Messages Queued for Delivery also matches this number during some samples.
I was wondering, what's going on here. When checking queues using Get-Queue cmdlet it doesn't show more than couple of messages in the queue.
How do I get this fixed? This seems to be a known issue from thread http://social.technet.microsoft.com/Forums/en-US/ac121f02-4359-4d18-b86a-9c9c78b320a9/perfmon-messages-queued-for-delivery-2147483764?forum=exchange2010
Any assistance would be greatly appreciated.

Hi ChaituNanl,
Thank you for your question.
By our search, I suggest we update Exchange to Exchange 2010 CU6 or later, because problem also seem to appear to Exchange CU5 or former.
We could download the CU by the following link:
http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-build-numbers.aspx
Notice: please note the version of Exchange Service Pack
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Windows Message Queue 64-Bit Support

Just wondering if the Windows Message Queue will ever be updated to support 64-bit Windows? It is some really neat low level tools on windows but only works fully in 32 bit Windows.
I'm looking to detect when a window is resized, or has a mouse down event, based on its HWND not VI reference. This is very easy to do with this library if you don't use 64 bit Windows. Any other tips on accomplishing this is appreciated.
EDIT: Attatched is a VI that runs in LabVIEW 2011 32 bit. On Windows 7 64-bit the "WM_Size" is not generated when the panel is resized. The mouse event does get generated for some reason. (this VI relies on VIs in the library linked earlier)
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Windows Message Queue Example.vi ‏91 KB

Emily-C wrote:
Hi Hoovah,
Are you running into specific issues in your application where LabVIEW events don't meet your needs?
Yes specifically when it is not a LabVIEW front panel that I am trying to detect changes to. I would like to be able to detect when a window is resized like Notepad. Something not LabVIEW. This is possible with the Windows Message Queue Library but not with LabVIEW events.
I think I may have a solution anyway and I'll need more time to test, but I can put this other window (Notepad for example) into a VI, then remove the ability to resize Notepad, but instead resize Notepad when the VI it is in gets resized. Then I can detect when the window is resized because I can be detecting a Panel Size? event (or Pane) on the VI that Notepad is in. This is alot of extra headache and things to keep track of but do able. But this also adds other flexibilities that I think I may prefer.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Sun ONE Message Queue 3.0.1 is now available

Sun One Message Queue 3.0.1 is now available. Sun ONE Message Queue 3.0.1
is an implementation of the Java Message Service version 1.1 specification.
It comes in two editions; a free Platform Edition as well as an Enterprise
Edition for full-scale, enterprise deployments.
Noteworthy changes in 3.0.1 (compared to 3.0):
* Substantial performance boost
MQ 3.0.1 provides message delivery throughput up to double that
attained with MQ 3.0, a performance boost that is especially important
under heavy load conditions.
* Certified for use with the Sun ONE Application Server 7.0
MQ 3.0.1 is certified for Sun ONE Application Server 7.0, and is used as
its native JMS provider. MQ has been integrated with the Application
Server, providing JMS messaging support in an Application Server
environment. You can configure the system for an internal MQ message
server managed with Application Server administration tools, or an
external MQ message server requiring MQ administration tools.
* Support for Linux Red Hat 7.2 (JDK 1.4.1)
MQ 3.0.1 is now certified for JDK 1.4.1 on Linux Red Hat 7.2 (and still
supported on Linux Red Hat 7.1).
* Bundled on Solaris
MQ 3.0.1 Platform Edition will be bundled with Solaris 9 Update 2 when
it ships in early 2003.
For more specific details about 3.0.1 please see the product Release Notes
at: http://docs.sun.com/source/816-6454-10/index.html
The two editions of Sun ONE Message Queue 3.0.1 are:
* The Platform Edition provides a free commercial grade JMS implementation,
ideal for small-scale deployments and development environments on various
operating environments.
* The Enterprise Edition delivers maximum scalability and security features
necessary for larger full-scale deployments.
For specific details about the editions see the Administration Guide at:
http://docs.sun.com/source/817-0354-10/overview.html#20864
For more information about the product or to download the current version
please visit:
http://www.sun.com/software/products/message_queue
Receiving feedback from current and potential customers is important to the
product team. If you have questions, thoughts for additional features or
think you have found a bug, we encourage you to send the team feedback.
Please send mail to [email protected]. If appropriate, be sure to
include the product version, information on the platform you are using and
steps to duplicate the problem you are experiencing. If you are interested
in purchasing the product and have a sales related question send mail to
[email protected]
Thank you for your interest in Sun ONE Message Queue!

Customers who purchased the iPlanet Message Queue for Java version 2.0
Enterprise Edition, or the iPlanet Java Message Queue version 1.1 Business Edition,
who also have a current maintenance contract for this product, are entitled to a free
upgrade. Sun customers should use their normal support channels to request the
upgrade. All corporate customers with Sun Software Support contracts should be
automatically notified of the upgrade via the ProductTracker by SubscribeNet
program. If you haven't, please contact Sun Customer Service online or by phone at
888-786-8111. Parties interested in upgrading will be required to provide
proof-of-purchase. Customers of previous versions of the free Developer Editions, or
customers without a current maintenance contract on this product, can not upgrade
for free, they must buy the Sun ONE Message Queue 3.0 Enterprise Edition product,
or they can download the Sun ONE Message Queue 3.0 Platform Edition product for
free from: http://wwws.sun.com/software/download/download/5275.html

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

Update (0 new / 0 changed) Warning received Message Missing Update Finished

The FULL load is running for long time and after some time it fails with processing Overdue. ( It is loading directly into datatargets no PSA as this is Daily FULL load to cube, deleting the previous request) The job overview is successfully finished in source system.
While load running in details tab under processing..
1)Data Package 6 ( 7407 Records ) : Missing messages -->
2)Update ( 0 new / 0 changed ) : Warning received
3)Message Missing: Update Finished for Cube
4)Processing end : Missing messages .
When clicked on helpnode on each step:-
1)Data Package
A data packet is either sent with transfer method IDoc or PSA to BI. You have the option here of viewing the data received and of editing it where necessary, of posting the data packet in simulation, and of canceling in simulation, and, if it has not yet been posted successfully, of starting the update manually.
2)Update
See also Data packet processing steps
By this the persistent saving of data is understood in its final target object
3)Processing Message
see also Data Packet Processing Steps
Single message from the processing of a data packet. Some messages contain references to application logs or other requests. The monitor then allows corresponding jumps.
4)Processing End
see also Data packet processing steps
If the processing of a data packet has been finished then any error messages for each process in the step up until this point are delivered to the monitor and to the called program (in the case of transferring by IDoc thus to the IDoc management). If no errors arose then a success message is logged per process.
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.

Hi
Try to transport the request again and check...
Perform the consistency test with 'RSRV'...
Check notes in this link if they could help u....UNCAUGHT_EXCEPTION
Regards
Gaurav

No Message: InfoCube Update Completed

BW Gurus,
I trying to load Data from PSA to the Cube Using DTP...during the data load, for certain data package the data load is keep on going and there is no error message as such and its still yellow status and under the "Updating to InfoCube ZXX_XX" node ,after the "Write to fact Table tasks "..
There is a message saying "No Message: InfoCube Update Completed" could anyone help what is the cause for this issue and also fix ? is it a problem with the amount of data load ?
Thanks,
Raman

I got below error in the ST22 dump....
"Database error text........: "ORA-00060: deadlock detected while waiting for
resource"
Internal call code.........: "[RSQL/INSR//BIC/FZXX_C02 ]"
I was searching for OSS notes associated with following keywords and note able to find any notes related my support pack level we are in SP13 (SAPKW70013)
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB" "WRITE_ICFACT"
Any help will be greatly appreciated...
Thanks,
Raman

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a soluti

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error message when updating decimal places in general settings

Hello together,
I got a big problem with the settings of decimal places.
I know that I am only be able to incerase these but it's a virgin database for a customer with no data imported.
Everytime I want to increase the prices decimal places I get the following error message:
"cannot update while another user is connected to the company"
But I checked all sessions connected to this database. I am the only person that is logged in.
I closed the db more that one time but it doesn't work.
Can you help me please?

Hello Meike,
I have had this problem a while ago and it was caused by the RPD-connection i had made with the customer server.
I had to change the values directly on the client machine.
Hope this also your solution.
Kind regards.

Ile system or message queue is no longer available

Hi All,
We are using DB2 and AIX. We getting below error message in db2 log file.Please advise on this issue.
2014-08-13-05.09.08.624033+060 I12752832A1291     LEVEL: Error (OS)
PID     : 25756258             TID : 1           PROC : db2fmp (168768) 0
INSTANCE: db2fdf               NODE : 000
APPID   : 10.144.69.239.57155.140801190410
EDUID   : 1                    EDUNAME: db2fmp (168768) 0
FUNCTION: DB2 Common, OSSe, OSSMountListing::getNext, probe:90
MESSAGE : ECF=0x90000034=-1879048140=ECF_FILE_REMOTE_SYSTEM_NOT_ACTIVE
          File is on a remote system and the link to that system is not active
CALLED : OS, -, statvfs
OSERR   : ESTALE (52) "A file, file system or message queue is no longer available."
CALLSTCK: (Static functions may not be resolved correctly, as they are resolved to the nearest symbol)
[0] 0x09000000074F5548 pdOSSeLoggingCallback + 0x34
[1] 0x0900000008F0A6C4 oss_log__FP9OSSLogFacUiN32UlN26iPPc + 0x1C4
[2] 0x0900000008F0AB70 ossLogSysRC + 0x70
[3] 0x0900000008F2EB90 getNext__15OSSMountListingFCPC23OSSMountListingGetParamCP12OSSMountInfo + 0x4B0
[4] 0x09000000020314A4 db2sap_mount_info + 0x3C4
[5] 0x0900000007760EE4 sqloInvokeFnArgs + 0xB4
[6] 0x0900000007760D44 @76@sqlerRunRoutine__FP13sqleInvokerCBPi + 0x168
[7] 0x0900000007760AD0 sqlerDyload + 0x140
[8] 0x090000000774AA40 sqlerFmpListener + 0x154
[9] 0x0000000100001230 main + 0x910
Regards,
Raj

Hi,
I have checked with AIX team filesyetm every thing fine.Please tell me which filesystem caused thi issue.
Reagrds,
Raj

Hi i had put my i phone charge with the usb cable there was message for updating i click on that and my i phone stop working tried to resolve on line trouble shoot but couldn't do any thing

i put my 3g i phone on charge with usb cable there was a message for updating i click on that my phone stop working even i could not fix with online troubleshoot

Where is the phone number on the iPod?
If you have an iPhone with iOS and use the same ID for Messages and FaceTime as on the iPod the iPhone's phone number will be listed for Messages and FaceTime on the iPod.
If you changed phone numbers on the iPhone, sign out of Messages and FaceTime and then sing back in. Then do the same a little while later on the iPod.
For some info see:
iOS: About Messages

Message queue updates

Similar Messages

Maybe you are looking for