Message Queuing and Once Only Delivery Question

Okay... not looking for too detailed information as you'll lose me.  Was hoping someone could clear something up for me.  In the Websphere world Websphere uses MQ as it's queuing mechanism internally to guarantee once-only delivery of messages.  Now I know XI can integrate with MQ (or other messaging systems, JMS,etc...)but certainly XI guarantees once-only delivery without any of those components.  My question is is XI's "queuing" mechanism proprietary or can, for instance, an external system somehow "put" or "get" information to/from that "queue"?

Shaun,
As far as my knowledge goes, I don't think external system can use the queuing mechanism of XI.
Regards,
Ravi
Note : Pleaser reward the posts that help you.

Similar Messages

  • Iphone 5 - I am trying to delete message threads and once I do, I go to text someone else and it won't send. HELP? I just don't want those messages on my phone anymore.

    Iphone 5 - I am trying to delete message threads and once I do, I go to text someone else and it won't send. HELP? I just don't want those messages on my phone anymore. I have tried to restart my phone but when I do, the "deleted" threads show back up on my phone. I use iOS 7.1.

    Hello Makayla,
    It sounds like you're deleted message threads keep coming back after you restart the devie. I recommend starting by quitting all the running apps on your phone:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it. 
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    If the issue persists, backup your device to iTunes and then restore it as a new device and verify that it works. 
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself. 
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Message queues and expiry *HELP*

    My problem is hopefully a simple one to overcome. Without going totally in depth, i have a Server program that creates JMS Object messages and sends them off to a message Queue. Then i have another program, a client, that recieves and processes the object messages accordingly.
    In my case, the server and the client will be on diferent sides of a erroneous wireless setup.
    Basically i want messages to be recieved if, and ONLY if, there is a complete connection to the client, if there is no connection there i want the message to expire. I tried using timeToLive(), but that will not suffice, as there is no way i can tell how long the message will take to reach the JMS provvider, and hence the client.
    Also in using a message Queue the unrecieved messages build up and the latest messages will not be recieved until all outdated ones are recieved. Is there another generic sort of connection that doesn not allow for the build up of messages? unlike topic and queue?

    Hi.
    Strange, you are describing the correct behavior for JMS.
    The simplest way will be to not use JMS at all.
    Since you can't (via JMS) check the connection status, you'd either have to do it
    via the provider's mechanism, or use the TTL.
    As for the queue you are using for the unreceived messages - thar's also a TTL issue. Set a TTL
    and the queue will clear up.
    It might be worthwhile to look into the provider's admin options - perhaps you may be ablr to set ttl at
    the provider itself, which will mean that you don't mind how long it takes the message to get to the provider - only how long it takes it from the provider to the destination.
    Nimo.

  • Sun ONE Message Queue and JMS

    Is Sun ONE Message Queue software a reference implementation or a
    product?

    Sun ONE Message Queue is a product. It is a production implementation of the JMS
    specification. Sun ONE Message Queue software performs the function of a message
    broker, essentially serving as a common denominator enabling the exchange of
    information between applications. A number of competing products perform this same
    function, but Sun ONE Message Queue software adds the availability of JMS APIs to
    promote an open, industry-standard interface to messaging middleware, thus
    promoting the platform interoperability of Java while also enabling developers of
    business applications to write to only a single interface. In and of itself, this does not
    make Sun ONE Message Queue software unique since other MOM products also
    conform to the JMS specification. However, the combination of JMS with high
    performance, low cost, ease of use, and Sun's world class distribution and support
    channels makes Sun ONE Message Queue software a highly competitive product.

  • My mac will not let me open (what were) folders, and displays only a question mark?

    About two to three months ago, I had a folder labeled "Complete" (random name). I had dozens of videos from my Flip and some documents created from TextEdit inside. I had it in my desktop first, but then decided it would be easier to place in my application bar. So I did that, and then it worked fine.
       Then, I accidentally deleted iMovie (yes, very stupid of me, I don't know how I managed to do that). It did not have anything to do with my Complete folder. It was still working fine.
        I reinstalled iMovie '08, and it took about 4-5 hours to successfully download all of the movies from iMovie (I'm a movie type of person). And when it did, I clicked out and found my Complete folder had a gray question mark instead of the blue folder it usually had. Confused, I clicked on it repeatedly and it did nothing. I held down the mouse and it said, "Open at login" with a check. I unchecked it, and it didn't open.
        Since then, I have had trouble searching for it via Finder. All of the videos inside were lost, as were the few documents. I tried to install TimeMachine, but alas, it is not compatible with my very old Mac OS X v10.4.11 Tiger. I think that I may go to an Apple store to see if they can help me, although I highly doubt they can, since it's been 2-3 months. The TimeMachine only went back 12 hours, anyway. I would have had to have done it then.
        I'm quite unsure what to do now. Any advice would be greatly appreciated! The videos and documents were super dooper important to me and I feel horrible and stupid that I somehow got rid of it.
        Thank-you,
    -Kikisan

    Hello,
    The question mark means it can't find it where it was when you put it in the Dock.
    I'd get EasyFind...
    http://www.macupdate.com/info.php/id/11076
    Use it to search your whole drive for Files & Folders, case insensitive & show invisibles...
    Complete
    That will show any with that word in the name at all.

  • G4 won't boot, had it running once and once only.

    Hey all,
    I got a G4 Power mac (2x 450 Mhz cpus) from a friend and he warned me that it didn't boot at all.
    I was able to comb these discussions and found a tutorial on resetting the pram/nvram that actually got it up and running. It let out a long beep followed by the regular chime and went into open firmware. I tried using the shortcut keys to launch a OS 9 and 10 cds but it would just go straight into open firmware! Tried the reset commands, kept going into open firmware.
    Left it alone for awhile and came back to it; it will not power on again (I couldn't find those instructions on the forums that got it running in the first place). Got a replacement battery for the mobo, still no power on. Getting a power supply and should get it by the end of the week. I have a lot of equipment to test with including 4 rams sticks, 3 video cards (2 agp/1 PCI), and 3 hard drives. I did get rid of the long beep by unplugging the hard drive that connected to the side of the mobo that is near the front of the case (blue connection). *wipes of sweat*
    Ok, assuming the power supply is fine, what should the next steps be? Notice anything weird about my story that would lead you to believe that I missed something? Any help at all is much appreciated!
    Thanks!
    Apple Power Macintosh G4 450 DP     No OS installed as far as i can tell, not sure what to do at all now.

    Hi, FriendArtiste -
    One item I haven't seen mentioned yet -
    When PRAM is reset, the startup disk choice kept in PRAM is reset to a default setting. This setting may not match your setup's configuration. If you have partitioned your hard drive, or have more than one drive and are not using the volume that is the default choice, it can hang the boot.
    If that is the case, the solution is to reset the boot volume of your choice in Startup Disk (Apple menu > System Preferences > Startup Disk).

  • Microsoft Messaging Queue and SAP XI .. Possible?

    Hi All,
    How can we integrate MS MQ with SAP XI? Its urgent.
    Ranjeet Singh.

    Hi Ashish,
    I thought I have mentioned the answer. Well in my case,
    the system that i need to integrate can communicate with external system through MS MQ or if the target system does not understadn MS MQ then it has a component which enable file  based commumnication.
    so I will have two solution for the integration:
    1. Either buy iWay Adapter for communicating with MS MQ .
    2. if client is not ready to buy the adapter , then we have use the file based communication. In this case I need to use File adapter.
    3. If at all , (in rare case) client is not ready to install the component which enables file based communication , then we have to write .Net code to retrieve xml message from MS MQ . .Net provides standard API for MS MQ.  I have tested this case also.
    Hope it is clear.
    Ranjeet Singh.

  • Message Queue vs RFC Queue

    Can anyone tell me what's the difference between Message Que and RFC Queue?
    Thanks
    Mark

    Dear,
    Connectionless programming involves using a queue to hold user input to another application or server. Here, we may not have a permanent connection to the application or server. Instead you log your input in a queue and the other application or server then takes it from the queue, processes it, and sometimes it may put the result back to the same queue or to a different queue. Unlike UDP, here there is no chance of message or data loss once you log it into queues.
    The Connection oriented is different from the aforementioned and talks about any standard database system (DBMS, RDBMS, OODBMS and ORDBMS) available these days. Presumably, I don't think that there should be an explanation required for connection oriented programming. Unlike TCP/IP, there is no chance of data packet loss and it will bring the data packet to the required destination.
    In short, message queue is purely connectionless and gives an assurance that it won't lose any data which is in the queue.
    Message queue will be used :
    a.Storing insignificant information in the message queue while your database server is busy with other real time processing.
    b.Process user input which is given by the user after getting supporting information from other source or applications that are not active or ready at this stage.
    c.Because of database server outage, you might require keeping user input in the message queue and processing it as and when the database comes online.
    d.Exchanging data with a mainframe system like SAP. Personally, the real time communication with SAP is often a problem. In such cases, the SAP system uses message queue for storing and forwarding information where real time communication is not possible at that time.
    RFC Queue:
    Communication between applications in different systems in the SAP environment includes connections between SAP systems as well as between SAP systems and non-SAP systems. Remote Function Call (RFC) is the standard SAP interface for communication between SAP systems. RFC calls a function to be executed in a remote system.
    In short, essentially application infrastructure and business requirements determine whether you should use a message queue or not. Personally, I would suggest that itu2019s a good idea to work with a tool for a while so that you can get to the solution in which you should use it.
    http://help.sap.com/SAPhelp_nw04/helpdata/en/6f/1bd5b6a85b11d6b28500508b5d5211/content.htm
    Regards,
    Syed Hussain.

  • Outlook 2013 and read only IMAP database.

    We use GFI Mailarchiver's IMAP Server to give our employees access to their archived items.  The IMAP server is read only mode as no one should be changing their archived mail.  This worked flawlessly under Outlook 2010 and prior.  
    We have now deployed our first 2013 client and have now found that it is trying to write to the read-only database when forwarding or replying to a message that was found in the archive.  My thoughts are that Outlook 2013 is try to modify the message in
    the archive with the "you forwarded theis message on September 11, 2014 at 2:15pm"  this causes Outlook to give the message "You cannot make changes to contents of this read-only folder.".  The message seems like a nuisance only
    but when you dismiss the message and try to close the forwarded or replied to message, you the the same message again and the only choice is to kill Outlook from the task manager. 
    Has anyone used Outlook 2013 in a read-only IMAP environment?  Is there a setting to turn of the updates that Outlook is trying to make to the mail store?
    Rob...

    Hi,
    Since you are using GFI Mailarchiver's IMAP Server, I'm not able to reproduce the issue or provide accurate suggestions in this case.
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Message Queue

    What is a Message Queue and Is there other MQ available other than java .where can i get more info on MQ or any documentation/tutorial

    check the site www.fiorano.com

  • Can we peek into System V message queue?

    Hi, there.
    I have to processes A and B, talking through system v message
    queue. For debugging purposes, I wish to attach a third
    process C to that message queue and print out what info
    process A and B are exchanging.
    Is that possible?
    thanks

    It is starting in Solaris 8, Update 2 (The 10/00 release), but not previously.
    man msgsnap(2) for all the gory details.

  • "Message Queue facility inactive"?

    Hi all,
    When I run ipcs command, I got:
    $ ipcs
    IPC status from <running system> as of Wed Mar 28 15:06:55 PST 2001
    Message Queue facility inactive.
    T ID KEY MODE OWNER GROUP
    Shared Memory:
    m 0 0x50000e9b rw-rr-- root root
    Semaphores:
    $
    Does this mean the Message/Shared Mem/Semaphore is not active? How do I make them active? Thanks in advance for your help!
    Phi;

    Hi Phil,
    The system V IPC components are dynamically loaded on Solaris, so aren't in the system until you try and use them. Run a program that creates a message queue and ipcs will then report about the message queue facility.
    Hope that helps.
    Ralph
    SUN DTS

  • Hook up to Message Queue

    Hi,
    I was just wondering if anyone knows whether I can get Calendar Notifications using Message Queue, I have successfully hooked up Messaging Server with Message Queue and that sends through NewMsg notifications at the moment. However I can't find any documentation regarding this kind of functionality for Calendar Server. I would like to use Message Queue, due to the JMS api being a whole lot nicer and more complete than the ENS stuff that I regret playing with.
    I have Calendar Server 6.3 patched to 121659-19. I can't find any csversion tool to give the exact output. Running it on Centos 5, as a single instance with multiple domain environment.
    Many Thanks for any help,
    Ned

    Hi,
    Yes, we also have the same issue with Calendar server 6.3 JMQ 4.1patch 1.
    I believe, Solaris 10 comes with JMQ 4.1 installed. We just did the following:
    1. Modified the JMQ configuration file /etc/imq/imqbrokerd.conf and replaced AUTOSTART=NO to AUTOSTART=YES
    2. Started Java Message Queue: /etc/init.d/imq start
    3. The Out put of command "/usr/bin//imqcmd query bkr -u admin" shows as follows:
    Version 4.1 Patch 1
    Instance Name imqbroker
    Broker ID
    Primary Port 7676
    Broker is Embedded false
    Instance Configuration/Data Root Directory /var/imq
    ... and so on
    4. Added the following to the ics.conf:
    local.server.csmfagent.enable = "yes"
    caldb.serveralarms.dispatchtype = "jmq"
    caldb.serveralarms.jmqTopic = "JES-CS"
    caldb.serveralarms.jmqhost = "localhost"
    caldb.serveralarms.jmqlib = "/path_to_calendar6.3/cal/lib/libmqcrt.so"
    caldb.serveralarms.jmqport = "7676"
    caldb.serveralarms.jmqUser = "guest"
    caldb.serveralarms.jmqPwd = "guest"
    5. We also have the ENS enabled and have the following in the ics.conf file:
    service.ens.enable = "yes"
    caldb.serveralarms.dispatchtype = "ens"
    caldb.berkeleydb.ensmsg.createevent = "yes"
    caldb.berkeleydb.ensmsg.createevent.url = "enp:///ics/caleventcreate"
    caldb.berkeleydb.ensmsg.deleteevent = "yes"
    caldb.berkeleydb.ensmsg.deleteevent.url = "enp:///ics/caleventdelete"
    caldb.berkeleydb.ensmsg.modifyevent = "yes"
    caldb.berkeleydb.ensmsg.modifyevent.url = "enp:///ics/caleventmodify"
    6. Ran the JMS client as /path_to_calendar6.3/cal/tools/unsupported/bin//jmqclient -u jesuser -w password -q imqbroker
    7. when we create some events or delete events ... we donot see anything reflected in jmsclient.
    Am i missing anything? Any idea whats the issue is? Can we have notifications published to both ENS and JMQ? or just either one of them?
    Any help is appreciated. Thanks in Advance!
    Regards,
    Arun

  • Question about active queue and related msg of Nets.Messaging server 4.15

    I have Netscape Messaging Server 4.15 Patch 7 (buil
    t Sep 11 2001). I see that the number of messages in active queue viewed as number of file (ls -l queue/messages | wc -l) doesn't matches with the number of messages that I see in Mailbox-deliver as showed by sendmail -bp command.
    Why?
    Very often number of file are few hundred, when the emulator of sendmail shows only twenty-thirty messages.
    And I see that the messages in active queue (if I open them with commands like more, view...) are all for local domains on server, so mailbox-deliver.
    There are sometimes a lot of messages of months ago...
    Thank you very much
    Best Regards
    Marco

    I have Netscape Messaging Server 4.15 Patch 7 (buil
    t Sep 11 2001). I see that the number of messages in active queue viewed as number of file (ls -l queue/messages | wc -l) doesn't matches with the number of messages that I see in Mailbox-deliver as showed by sendmail -bp command.
    Why?
    Very often number of file are few hundred, when the emulator of sendmail shows only twenty-thirty messages.
    And I see that the messages in active queue (if I open them with commands like more, view...) are all for local domains on server, so mailbox-deliver.
    There are sometimes a lot of messages of months ago...
    Thank you very much
    Best Regards
    Marco

  • My iphone was off for almost two weeks and once i cut it back on i only recieved text messages but no imessages that i KNOW were sent to my phone... is there anyway i can see them or no?

    My iphone was off for almost two weeks and once i cut it back on i only recieved text messages but no imessages that i KNOW were sent to my phone... is there anyway i can see them or no?

    Hi,
    In Messages on the Mac do you have the Preferences > Messages section set to "Save History when Conversations are Closed" ?
    This will store all IMs and iMessages in ~/Library/Messages/Archive.
    Use the Finder > Go Menu > Go to Folder and type that path into the Dialogue box that appears. (~/Library/Messages/Archive).
    They are stored in dated folders so some guessing/trail and error will be needed.
    You may find that if this was an iMessage and you  send the person a new message that the whole History with that Contact since you installed Mountain Lion/Started Messages may appear and that it is scrollable the closer you get to the "top" and the top may keep moving until all is on show.
    10:31 PM      Monday; December 24, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for