Message read status not changing (when changed on the server)

I have Mail set up to for Gmail using IMAP. I also have my iPhone set up for Gmail using IMAP. When a message gets marked as being read (either by reading it in Gmail, Mail or my iPhone) Mail does not update the status to read. If I read the message on Gmail or in Mail my iPhone updates the status to read. Shouldn't Mail update the status of the message to read when it changes on the server?

Try - https://www.cibc.com/ca/personal.html
https://cibc.com is not the same as https://www.cibc.com <br />The certificate is only valid for https://www.cibc.com , not https://cibc.com

Similar Messages

Email message read status not updating

As indicated in the title line the updating of my email status as 'read' in not happening all of a sudden after months of good operation. I did a battery removal and reinstallation, turned the enterprise activation off and then back on to reset the connection to my email as well as deleting a mail connection file that my IT guy pushed back out to me.
any thoughts on what to do next?

Hello,
You did not say clearly, but from what you said I assume this is BES. As such, it's really up to your BES admins to resolve the issue. They can seek more assistance from our BES-specific forums located here:
http://supportforums.blackberry.com/t5/BlackBerry-Solutions/ct-p/BlackBerryBoards
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why portal content is not displayed when we give the server IP in the url

Hi all,
I have small doubt in portals.
When we give the portal url in the browser with server alias(Eg: http://rajportal:50000/irj/portal ) it will display the portal roles and the content,
but when we give the Portal server IP instead of server alias (eg: http://10.10.30.30:50000/irj/portal) it will display only portal roles but not the portal content.
please can any one explain the reason
thanks
Rajeev

Hi,
Please the URL is fully Qualified Domain based one or not.
Please check out the links-
Fully qualified name of the portal service application
Regards
Lekha

Message: read status not showing....

I used to send sms and the status of the message always appear either "delivered" or "read at.." But now it's always showing only "delivered".... What happened? Can anyone help?

SMS (green bubbles) has neither delivered reports on an iPhone. Only iMessage (blue bubbles) does. If you send an iMessage it will always give you a delivered report. However, it will only give you a read report if the recipient has that featured enabled in Settings>Messages>Show Read receipt.

Siri could not download required information from the server

I'm getting the message "siri could not download required information from the server". I haven't been able to use SIRI for 5 days. Does anyone know an answer?
I've tried turning SIRI off, rebooting, and turning it back on. You know, the old PC approach.
I have an excellent WI-FI connection.

Not an answer but I do know if I do not have a good internet connection (3G or WiFi) I get that same error. Has always cleared up for me once that was resolved.

I no longer receive notification or sound or even a badge app icon when receiving a text message, I have not made any changed to my sounds

How do I fix this, I no longer receive notification or sound or even a badge app icon when receiving a text message, I have not made any changed to my sounds, I've checked all the settings and everything is good, I powered off the phone and restarted, I synced it and still nothing, can anyone help?

Settings app > Notification Center > Messages (you will need to check both the INCLUDE and DO NOT INCLUDE sections). Set the alerts you wish to see.

Received notice of an update for one of my apps and when I tried to update the message reads "Account Not in this store" i must switch to a Canadian store before purchasing

Received notice of an update for one of my apps and when I tried to update the message reads "Account Not in this store" i must switch to a Canadian store before purchasing. I deleted app and tried to download again but still got the message. Anyone know how to fix? FYI have had phone for 2 years and this is the first time this has happened.

The Apple id that you created do you remember if you created with your region sellected as Canada or US. If so you can change Region directly on your device by clicking on App Store icon, Scroll to bottom and tap your app is, click view acct and change region

View only works in one direction,will not change when I turn the phone

view only works in one direction,will not change when I turn the phone

Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

When I tried to update, I got this message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator" What do I do???

I am running version 3.6.22 and would like to update. However when I tried to update from the Mozilla web site I got the message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator"
What do I do now?? Paul Stager [email protected]

I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?

I have my photos iPhoto but my iPhoto library is empty. when clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

I have my photos in iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

When what is clicked?
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Colors in parade do not change when I move the Temperature slider.

I am trying to do the speed grade tutorial, but the color does not change when I move the temperature slider.

It might be nice to know which "issue" of Sg you're using.There have been issues where the colors "lag" while using a slider/control, but typically when you let "up" on the control, the adjustment is "there". From your comment, am I correct in assuming that the controls simply don't do anything even after you've moved them? And of course ... when you "move" them, you do see the indicator on the slider-line move, right?
Neil

[Bug?] Defer Panel Update not working when changing scale property

Hi,
I found that Defer Panel Update [when True] does not work properly when changing the scale fit property of an intensity graph.
Try the VI.
When Defer Panel Update is True, and you change the Numeric controls, the Intensity graph is not updated (as expected).
But now change the "Z Scale.Scale Fit" button and.... the Intensity graph is updated (only the Z-color, not the axis).
This looks to be a bug to me!
Nicolas
Attachments:
[Bug] Defer Panel Update not working when changing scale property.vi ‏27 KB

Hi Nicolas,
This indeed looks like a bug. I will do more research on it and file a bug report if it's not already filed. Thank you for posting this information!
Yi Y.
Applications Engineer
National Instruments
http://www.ni.com/support

I want the title on the browser to change when one of the frames changes in the Frameset.

I am using frames (please don't tell me off!) and PHP.
I want the title on the browser to change when one of the
frames changes in the Frameset.
Normally the title of the browser comes from the Frameset,
But I am sure I have seen websites where the title changes
depending on one of the frames... how is this done?
C

Then don't use frames.
> Normally the title of the browser comes from the
Frameset, But I am sure I
> have seen websites where the title changes depending on
one of the
> frames...
> how is this done?
Show us one and we'll tell you.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"colinwalton" <[email protected]> wrote in
message
news:epuu1t$kgv$[email protected]..
>I am using frames (please don't tell me off!) and PHP.
>
> I want the title on the browser to change when one of
the frames changes
> in
> the Frameset.
>
> Normally the title of the browser comes from the
Frameset, But I am sure I
> have seen websites where the title changes depending on
one of the
> frames...
> how is this done?
>
> C
>

Rules applied to multiple cells trigger color changes when any of the cells

"Rules applied to multiple cells trigger color changes when any of the cells meet the rule’s condition." That's what Help says, but when I follow the directions, it doesn't work. This is in Numbers 08.
I have a table where the contents of one column are either "YES" or "NO", depending on formulas using variables from other cells. If YES, I want the fill of that cell and that of two adjacent cells to change from white to green. I select all three cells and use conditional format rules for "text contains:" YES, then choose my fill color. When I return to the table and introduce values for the variables that trigger the rule, only the cell in the YES/NO column changes to green; the other two remain white.
While I am spreadsheet challenged, I usually can follow directions as plain as those in Help, but it's not working. I couldn't find anything in the discussions after an hour of searching. Is this a known problem or am I just stupid?

For what it's worth, that's the way I read that line in the User Guide as well. What it actually appears to mean, though is 'Rules applied to multiple cells apply independently to each of the cells."
Here's a workaround for your three adjacent columns. Long, but fairly simple steps.
Add a second table to the sheet (Table 2).
Resize the second table to one column wide and as many rows as you want to apply the conditional format to.
Set the width of the column to the same width as the three columns you want to highlight, and the row height(s) to match the rows.
Format to table to have NO Header or Footer row or column.
Use the Wrap Inspector to uncheck "Object causes wrap"
In the first top cell of Table 2, enter an = sign, then Click on Table 1 in the sidebar, Click on the first cell that will hold YES or NO.
Fill the formula down the rest of Table 2.
With all cells in Table 2 selected, use the Cell Format inspector to set the 'text contains yes' rule and the conditional fill colour for these cells.
Test the conditional formating by introducing values into Table 1.
Click on Table 1 in the sidebar, then use the Table inspector to set Cell Fill to 'none'.
Click on Table 2 in the sidebar, then drag that table onto table 1 aligning it to cover the cells in which the conditional formating is to appear.
When positioned (and still selected), go to the Arrange menu and Send Backward to move Table 2 behind the (transparent) cells in Table 1.
With Table 2 still selected, click on the Cell Borders color well and set the Opacity of the borders to 0%.
Click the Text inspector and set the Text colour Opacity for Table 2 to 0%.
Regards,
Barry

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

Message read status not changing (when changed on the server)

Similar Messages

Maybe you are looking for