Message: read status not showing....

I used to send sms and the status of the message always appear either "delivered" or "read at.." But now it's always showing only "delivered".... What happened? Can anyone help?

SMS (green bubbles) has neither delivered reports on an iPhone. Only iMessage (blue bubbles) does. If you send an iMessage it will always give you a delivered report. However, it will only give you a read report if the recipient has that featured enabled in Settings>Messages>Show Read receipt.

Similar Messages

  • Email message read status not updating

    As indicated in the title line the updating of my email status as 'read' in not happening all of a sudden after months of good operation.  I did a battery removal and reinstallation, turned the enterprise activation off and then back on to reset the connection to my email as well as deleting a mail connection file that my IT guy pushed back out to me. 
    any thoughts on what to do next?

    Hello,
    You did not say clearly, but from what you said I assume this is BES. As such, it's really up to your BES admins to resolve the issue. They can seek more assistance from our BES-specific forums located here:
    http://supportforums.blackberry.com/t5/BlackBerry-Solutions/ct-p/BlackBerryBoards
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Message read status not changing (when changed on the server)

    I have Mail set up to for Gmail using IMAP. I also have my iPhone set up for Gmail using IMAP. When a message gets marked as being read (either by reading it in Gmail, Mail or my iPhone) Mail does not update the status to read. If I read the message on Gmail or in Mail my iPhone updates the status to read. Shouldn't Mail update the status of the message to read when it changes on the server?

    Try - https://www.cibc.com/ca/personal.html
    https://cibc.com is not the same as https://www.cibc.com <br />The certificate is only valid for https://www.cibc.com , not https://cibc.com

  • The message icon is not showing in the drop screen of my photos it used to show before and now it's not there how can I get it back?

    The message icon is not showing in the drop screen of my photos where it says do you want to email, message, assign, use as waller paper etc. it used to show before and now it's not there how can I get it back?

    Did this back along to mine. Plug it into itunes on your pc (or Mac) and click on the ipod icon on the left hand side. When the device options come up on the main screen, click on restore. Follow the steps and it should restore to factory settings. If you had icloud activated on the ipod all previous purchases should be in the cloud and ready to download onto the ipod afte rit has been restored to factory settings, otherwise you'll have to download them all again. Hope it helped.

  • Received notice of an update for one of my apps and when I tried to update the message reads "Account Not in this store"  i must switch to a Canadian store before purchasing

    Received notice of an update for one of my apps and when I tried to update the message reads "Account Not in this store"  i must switch to a Canadian store before purchasing.  I deleted app and tried to download again but still got the message.  Anyone know how to fix?  FYI have had phone for 2 years and this is the first time this has happened.

    The Apple id that you created do you remember if you created with your region sellected as Canada or US. If so you can change Region directly on your device by clicking on App Store icon, Scroll to bottom and tap your app is, click view acct and change region

  • External hard drive seagate 3.0 cant read and not showing in disk management.

    Why my external hard drive seagate 3.0 cant read and not showing in disk management, while 2.0 can read. please help me to solve it. BIG THANK YOU.. 

    Hi,
    Yes, like Vegan said, you should check if your Seagate hard drive if it could available in USB 3.0 port. This is hardware related.
    Karen Hu
    TechNet Community Support

  • I have my photos  iPhoto but my iPhoto library is empty. when clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

    I have my photos in  iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

    When what is clicked?
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • My compatible ebook reader is not showing in ADE

    I have downloaded epub books from the library onto a windows laptop ADE.
    I connected my ebook reader to the computer before opening ADE but it does not show in the library
    I have ADE authorization but cannot transfer my library books as the ebook reader is not showing.
    I have previously transferred onto the same ebook reader but I have had to do a restore on the laptop and then delete my previous authorization and re-authorize.

    I have had something the same, it's now sorted.  I don't know what I did but I now have my book on my reader.  Perhaps someone out there could tell us what to do as I am sure this is going to happen again.  I tend to just go at it without knowing what I'm about but it works for me.  I know that is not satisfactory but I have no skills in the technology field!  Good luck - to us both! 

  • W520 Smart Card reader does not show up in Device Manager

    W520 Smart Card reader does not show up in Device Manager.
    It was working before and now nothing.  Nothing happens when SD card plugges in.
    Could my smart card reader stop working or is this a configuration issue?
    Any thoughts?
    thanks
    Ian

    Hi  Ian,
    Welcome to the community, and thanks for the post.
    The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
    http://support.lenovo.com/en_SG/downloads/default.page?
    After that check if the issue get resolved.
    Regards,
    Sameer
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • 6.1 NPD - Project Name and Status not showing in the Project Header

    I have this issue in 6.1 NPD - The NPD Project Name and Status is not showing in the Project header when opening a project. Any ideas? Thank you.

    Is this happening for NPD Projects that are newly created, prior to clicking Save? Or for already existing NPD projects?

  • Share Extensions (Mail, Messages, and Flickr) Not Showing

    The ShareKit extensions for Mail, Messages and Flickr are not showing in the Share Menu, or the Extensions System Preference. Everything else is fine. I do have a Flicker account set up in Internet accounts. I’ve repaired permissions, and tested it in other accounts on my Mac - same thing. Can’t share to Mail, Messages or Flickr. I’ve even tried the terminal command from https://support.apple.com/en-us/HT203129. Shows them loading, but not showing in the System Preferences or the Share menu. Yes, I even closed both System Preferences and Safari.
    Any suggestions? I really would like to resolve this.
    Thanks.
    Dave

    A better way than Import would've been to use Migration Assistant, which you still can.
    Or you could try Import emlx to mbox, See if this helps...
    http://www.cosmicsoft.net/emlxconvert.html
    Import one box at a time and then drag the mails from the Imported mbox to Inbox or whatever.

  • Novatel MiFi WWAN status not showing up

    Hi,
    I got the Novatel MiFi running in modem mode using the Novatel drivers. So far so good. But when I click the "Show WWAN Status in Menu Bar" checkbox, nothing happens. Nothing appears in the menu bar. Also the Apply button remains disabled - not sure that's as it should be.
    But mainly, the WWAN status never shows in the menu bar.
    Does anyone what know what I need to do to make it work? Are there some preferences I could delete? Other ideas?
    thanks!

    By modem mode, do you mean wired using the USB port? If true, I would not expect it to show up as a wireless WAN connection. It would be a USB attached modem.

  • IPMP groups status not showing

    Hi ALL,
    I have 2 V880 nodes with SUN cluster3.1U3. In one node is not showing IPMP Group status.
    root@dbserver1 # scstat -i
    -- IPMP Groups --
    Node Name Group Status Adapter Status
    root@dbserver1 #
    Please help.
    Thanks in advace.

    scstat -i should show atleast one IPMP group on running the command. In your output, you are not seeing any IPMP group.
    Udate with your ifconfig output.

  • Unread and read mail not showing in Mail after upgrading to Yosemite

    Hi there,
    I recently upgraded to Yosemite.
    In the Mail app, mail is not showing up properly. I have unread mail, which is not showing up, despite me refreshing or sorting by unread first, and even an email I read this morning on Chrome isn't showing up, as you can see by screenshots.
    How do I fix this issue?

    Hi,
    In Mail > Mailbox dropdown menu, try clicking on Rebuild at the bottom.

  • Sd card reader does not show up as a external hard drive any were on my mac

    i have a sd card reader that is run through usb. i plug it in whit my card in it that has files on it but the driver does not show up any were not on the desktop not any were ive gone through the trouble shooting on apples sight but no luck. any one have a idea?
    the weird part about it is that it worked a few weaks ago no problem like i would just plug it in and it would show up on my desktop

    It seems that Intel Macs have problems seeing (the media in) some USB storage devices.
    For example I have a Zynet CR-T1-U28 8-in-1 memory card reader. It works A-OK on an old Powerbook running 10.3.9, and on several PPC-based newer machines running 10.4.10. The cards I've tried in it mount immediately and show up on the desktop (and iPhoto starts automatically if appropriate).
    However none of the FAT-formatted cards I've tried will mount on any Intel-based machine I've tried it on (all have been running 10.4.10).
    Here's how it shows up on my Macbook:
    USB Storage Device:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Generic
    Product ID: 0x3260
    Serial Number: 20030903213338562
    Vendor ID: 0x0aec
    And here's how it shows up on the old Powerbook:
    USB Storage Device:
    Capacity: 60.75 MB
    Removable Media: Yes
    Detachable Drive: Yes
    BSD Name: disk1
    Vendor Name: Generic
    OS9 Drivers: No
    Product ID: 12896 ($3260)
    Speed: Up to 12 Mb/sec
    Bus Power (mA): 500
    Serial Number: 20030903213338562
    Interestingly one kind of card I've tried, a Sandisk M2 card, the 64 MB card shown on the powerbook, mounts A-OK when it's in my Z710i phone and is connected via USB to the macbook. At first I thought the card reader could be at fault, but given the number of (admittedly vague) reports I've seen here today about similar problems with other devices I'm more inclined to blame some driver or kernel problem on Intel macs.
    The following showed up for the first time ever in the console log during today's test to get the System Profiler data:
    Jul 22 14:27:17 macweird kernel[0]: USBF: 773285.286 IOUSBCompositeDriver[0x60c0c80](USB Storage Device) GetFullConfigDescriptor(0) returned NULL

Maybe you are looking for