Message reader problems after Microsoft Apps insta...

My previous thread was delete due to forum rules infringment.
I describe here again my problem, hoping to have a solution and considering that the problem I faced was not my fault, but it happened after a Nokia official update downloaded via Ovi Suite.
On 15th of April I've installed the Microsoft Apps and after my C6-01 reboot I found that the application "message reader" does not work anymore (tapping on the blue icon in the homescreen had no effect).
The only way to use the message reader was going in the incoming SMS folder, select a message anoose "LISTEN" from the menu. In this way the reader works.
Some days ago someone in this forum suggested me to remove the configured mailbox and try; in this way the reader came back to life and worked again, but if I add a mailbox the problem come back and the reader is malfunctioning again. So the only way to have this application working is removing any mailbox from my C6-01.
Therefore, considering that this problem occurred after an official update from Nokia and not for an user's error, I would like that Nokia tell me how to solve this malfunction.
Thanks for your attention and forgive my poor english.

After the first time I installed Micro$oft App$ I did a deep reset pressing the four keys as described in a web site I've found. After this procedure my C6-01 rebooted without many applications, so I have connected it to Ovi Suite and restored the firmware. The result was a "brand new" and perfect phone, until the new installation of M$ Apps on 11th of April :-(
So we are three Nokia users with the same problem... and we will faithfully wait for a fix ;-)

Similar Messages

  • I can connect to the internet and everything is working o.k. but I cannot connect to the app store. Error message reads Cannot connect to App Store

    I can connect to the internet with no problems ,but I am unable to connect to the App Store. Error message reads--- Cannot connect to App Store.

    Hey William,
    It sounds as though you are having difficulty with your Mac being unable to connect to the Mac App Store. This article has some steps that may help you troubleshoot -
    Can't connect to the iTunes Store - Apple Support
    Note that the title is for the iTunes Store, the steps are still relevant.
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • Problem Instaling Microsoft Apps 2.1 5616

    Can not install update Microsoft Apps 2.1 5616 and previously used the 2.00 version.I've tried to solve the problem with reinstal Belle Refresh but again it was the same through the Nokia Suite and via OTA Helppppppppp!!!!!
    Solved!
    Go to Solution.

    We removed the many posts with screenshots as your description is quite clear and these posts do not really add any extra information. Have you attempted to do a fresh install of your device?  Follow the procedure below to do a full device reset and (re)install of the system firmware:
    If you have data on the phone you wish to keep create a backup using Nokia Suite but when asked deselect the option to include settings in the backup. You can start a backup through Tools>Backup in the Nokia Suite menu.
    Now disconnect your phone from the PC and select the offline profile, press the on/off switch and from the menu which appears select and activate the profile offline.
    Enter the code *#7370# followed by the security code 12345. Please be aware this reset may take a while. Your phone will restart when finished.
    After the phone restarts go through the Device First Use sequence to setup the phone correctly.
    Now connect the phone to your PC again and let Nokia Suite install the requires files on phone. After this (re)install the latest system update. When you go to the update screen in Nokia Suite your will either be presented by a system update or you can choose to re-install the current (up to date) version again.
    After the update verify if there are any additional updates and install these as well.
    After this you can restore the backup if you made one.
    It is possible that your device storage area requires a full rewrite to allow the installation of these apps, if the above does not resolve the ability to install the apps please visit a Nokia Care point for further assistance. You can find the nearest one through the 'Contact us' section on this page.
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Facing problem in Microsoft App 2.0 installation i...

    HI Admin & All
                i am trying to update my c7 belle mobile  Microsoft App 2.0 through Nokia Suite 3.3.89. but installation doesnot complete. once installation finish 50% its hangs for few mins then says some error try to reinstall nokia ovi suite. i too tried update microsoft App through my mobile but its failed ......check attachment file for Error message what i am getting 
    Advance thanxs for your support 

    Hi Guys
    This was super annoying.  It seems Microsoft is the culpruit.
    Go to the installed Apps screen, Hold the button over the Microsoft Apps (ver 1 I guess) and select remove.  Do for the 2 Microsoft Apps installed.
    I rebooted my phone, and then re-did the update with success.  Ver 2 of the Apps will be installed with Office Mobile...
    Seems Nokia update is as bad as WIndows Update now, One of these days we'll get the WU dreaded Error codes I'm sure ....

  • Email on Nokia 700 changed after Microsoft Apps. H...

    After installing Microsoft Apps on Nokia 700 (111.030.0609) the standard email client changed look and feel. And it just refuses to open url links from html mail.
    I removed Microsoft Apps, but old email client styling was not restored.
    I made hard reset, but the client is the same.
    Please, how can I get my old email client back? I don't like the new white background and changed buttons.
    Please, help me!

    Maybe not possible to go back to old email unless Nokia provides any in Nokia store.
    I have installed quick office pro and office word files are not opening!
    Hope that Nokia and Microsoft release Office apps soon to read and edit office files.
    Hope it also includes direct .txt editor too.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • E6 battery drain after microsoft apps update

    just two days ago i updated with microsoft apps in my e6 belle. Now the battery doesn't last even a day. I went to installations in settings and tried to uninstall microsoft apps, but a pop up says 'file cannot be deleted'. How do I uninstall microsoft apps from E6 belle? Seriously upset with nokia. at this rate i will start a facebook page telling people to switch to android, with nokia anyway already suffering from the osborne effect. Really upset. Just tell me how to remove this slow and useless microsoft apps from my supposedly good business phone e6? I was much happier using the faster and more user friendly quickoffice.
    Problem: need to uninstall microsoft apps (word, onenote) from E6 belle.
    Solved!
    Go to Solution.

    @deb52001
    Can only suggest that you have a look at this resource:http://digipassion.com/2012/06/uninstall-microsoft-apps-from-symbian3-belle-phones.html
    Since QuickOffice not currently compatible you might like to look at Picsel SmartOffice as an alternative..
    Happy to have helped forum with a Support Ratio = 42.5

  • JMS Message reading problem

    Hi all
    I have a problem with MQJMS...I am successful in putting the message to the queue and also reading it...but the problem is that i was trying to put a string message in the queue...but i am not able to read the original string from the message.this is the code i used....
    Putting the message in the queue
    String Buffer = "Message";
    boolean transacted = false;
    session = qconnection.createQueueSession( transacted, Session.AUTO_ACKNOWLEDGE);     
    BytesMessage message =
    session.createBytesMessage();
    message.setJMSType("DATAGRAM");               
    message.setStringProperty("Fmt","PLAINTEXT");               
    message.writeBytes(Buffer.getBytes());                              
    qSender = session.createSender(ioQueue);               
    qSender.send(message);
    Reading the message from the queue
    QueueReceiver queueReceiver = session.createReceiver(ioQueue);     
    Message msg = queueReceiver.receive(Long.parseLong(pollTime));     
    If I try to print the msg i am getting the details as
    JMS Message class: jms_bytes
    JMSType: String
    JMSDeliveryMode: 2
    JMSExpiration: 0
    JMSPriority: 4
    JMSMessageID: ID:414d5120454149544553544d47522020456e8f002004d901
    JMSTimestamp: 1165040197487
    JMSCorrelationID:null
    JMSDestination: queue://EAITESTMGR/BALU.IN
    JMSReplyTo: null
    JMSRedelivered: false
    JMSXDeliveryCount:1
    JMS_IBM_MsgType:8
    Fmt:PLAINTEXT
    JMSXAppID:java
    JMS_IBM_Format:
    JMS_IBM_Encoding:273
    JMS_IBM_PutApplType:6
    JMS_IBM_Character_Set:UTF8
    JMSXUserID:eaijdev
    JMS_IBM_PutTime:06163748
    JMS_IBM_PutDate:20061202
    Integer encoding: 1, Floating point encoding 256
    54484953204d45535341474520495320564941204a4d53204348414e4e454c
    But the thing i need is to get the same string value ie Message
    Anyone out there could please help me out with this
    Thanks in advance
    Balagopal

    See: http://java.sun.com/products/jms/tutorial/1_3_1-fcs/doc/jms_tutorialTOC.html
    BTW you are diplaying the toString() value of the Message object itself. You need to call the Message class's method to get the message out of the Message object.

  • Has anyone found a solution for fixing the dvd reading problems after installing snow leopard?

    I installed snow leopard on my macpro tower and my dvd player will not read dvds. My archived dvd all come up blank but on my laptop their fine. All my other dvds are just spit out. I have seen hundreds of post about this in the forums but I haven't come across a solution. Apple told me they have never come across this issue which is disturbing to say the least.

    Leroydouglas
    Thanks, I did see that thread and way too many others like it. My drive was working fine up to the minute I installed snow leopard and now I can't read all my archived dvds of the last 5 years of my work. Nor will it read the training dvd "New" that I just bought. It also won't even read the iwork disc that came with snow leopard. Of course all these disc work fine on my other make that didn't get the snow leopard upgrade. Apple support told me they never heard of anything like this. I took it to the apple store and they think it the dvd drive itself. Please, it plays cds fine and accepts new dvd media...some. Countless people have had their drives go out right after the snow leopard install.
    I'm sorry but what happens to a dvd player or what hardware problem happens to only allow a player to read a few dvds but all cds. Could someone explain to me what breaks. Apple saying I need to by a new dvd player from them is crazy. Why do I get the feeling that if I install snow leopard on my other machine that the dvd player will also break. How also can apple not have any record of this happening to others.
    I work with windows machines and linux boxes and Macs and I'm sorry I trusted an upgrade to a mac os that has been around for a while. If I would have checked the forums the way I do with anything I work with I guarantee I would not have upgrade to snow leopard after seeing all the people out their with this issue. It is also shameful that apple says it has no knowledge of this problem.

  • GPIB read problem after repluging the connector

    Hi,
    I think I have a problem with Labview.
    At the start, all work correctly. But if I unplug the GPIB connector and replug it later, labview "freeze" at "GPIB Read".
    Nothing happen, and I can't stop the process (the "start" button stay black, wathever I do)
    The only solution is to close the VI and reload it.
    But when I do this, a message appear "Name of the VI: Resetting VI", and it stay forever . . .
    At this point, I must restart Labview by the task manager. And when I restart it, all work properly again.
    But sadly, I can't restart Labview again and again (some problems with my network, and the license is on it), so that why I'm here.
    I almost forgot: The problem don't come from the GPIB's hardware connection because NI MAX work properly (I can scan for intruments and communicate with them)
    Since English is not my native langage, I may have done some errors, sorry about that.
    Thank you for your help !
    PS: I use a GPIB-USB-HS connector, and the problem happen with a dozen of instruments, that's why I really think the problem might came from Labview (or from me of course).
    I'm also using the NI 488.2 v3.1.1 driver.

    What exactly do you mean by "unplug the GPIB connector"?  Are you referring to the USB connector?  If so, what you are doing is causing all of the references to the hardware that your VI has setup invalid.  This is one of the reasons I avoid USB GPIB.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • VISA read Problem: After a while the device stop responding

    Hi everyone,
    I am facing a really strange bug that anything that I have done could not solve it. I have a PIC device that I made myself communicating with LabVIEW by a RS232 -> USB converter. Everything seems to be ok, but suddenly (it can last 30, 45 or 50 seconds), LabVIEW stops receiving data and any buttons do not respond anymore, not even the stop button. I have to remove the usb converter to get the buttons to respond again, and then I got the error:
    Other programs that opens this same terminal can communicate with my device for hours without errors. I sure open the session and only close after the while loop. Can anybody help me?
    Solved!
    Go to Solution.

    Hello,
    Same problem for me! It can last 1 hour or 5 hours but at some point the two parts of the program that have a RS-485 to usb stop. This program was working perfectly until I changed the computer. The OS was vista (32 bits) and it is now 7 (64 bits). This is the only thing that has changed.
    I also found that if more parts of the program are running this problem appears earlier. It was definitely not issue before since the program could be running for weeks.
    Thanks for your help.

  • Message mapping problem after RFC import in SP14

    This never happened in earlier versions. If I make minor changes to RFC structures (ex: add new field) and than reimport, my mapping (in the past) needed adjustments only for the new fields. Now, all fields need to be remapped.
    Anyone facing similar issues? Is there any patch for this?
    Thank you.

    Hi Parimala,
    Even it should not happen . But even I have faced this once. But I just added some spaces and activated. It worked for me.
    But if you are changing your source structure, then it usally happens. But if it is target then it is not happening.
    It is just my views,
    Regards,
    Moorthy

  • Nokia N8 memory and Microsoft Apps

    Hi everyone, 
    I have a nokia N8, with its (c:/) 250M phone memory. I won't mention the little space problem on this phone (compared to 500M on C7 for example). But I just want to talk about the problem of Microsoft Apps monsterous volume on phone memory (taking more than 50M). Even worse, These apps CAN NOT be uninstalled. I tried from the menu list with a long press and I don't have the (delete) option. I tried from setting>installations>installed apps but microsoft apps don't even show there... 
    so this is just a little message for guys in Nokia, next time you force some update on phones (it wasn't optional for me, it came with Belle) keep in mind that the phone u manufactured has a very limited memory, or at least give people the option to delete what they dont need. I have now like 50M left on my phone memory and its performance is degrading more and more (repeated freezing especially when using nokia browser). 
    thnx a lot

    I saw this post, and away from the fact that this is a 3rd party solution (not nokia product), you can read the bottom of the solution page: 
    "Despite this fact some 8-10 MB of phone memory is consumed after installation of Microsoft Apps (may be due to modification of System files). And unfortunately this space is not recovered even after completely removing the Apps by the above method. The only way to get back that space is by formatting the phone or re-installing Belle via Nokia Suite."
    I applied that and deleted the MS apps and gained nothing on my phone memory... apparently the damage is beyond my ability to repair it... 
    Hence my message for Nokia Guys, next time you make any updates, KEEP in mind that we dont have much memory left and the performance is going down cuz of this... 

  • Microsoft Apps SW Update / Nokia700

    Last week i checked if there is any sw updates and saw "Microsoft Apps". I started downloading the update, and somewhat it stopped installing and gave the message below.
    "unfortunately there was a problem getting your updates. you can use your 700 as normal. please try again later to complete the update."
    Now, whenever i use sw update, it looks like the phone does not check whether there are updates or not. it just shows "microsoft apps" update and it can never finish installing.
    i guess my 700 downloaded the update files. but the files are corrupted, and it can never finish installation. In fact installing process does not even start (% bar does not move a bit)
    things i tried,
    -trying sw online&offline
    -restarting the phone
    -trying sw update on 3G or WiFi
    -trying sw update without the memory card & taking the battery out
    -triyng sw update without any open apps

    You can read more about Microsoft Apps from http://www.symbiantweet.com/microsoft-business-app​s-now-available-for-nokia-n8-x7-e7-e6-c7-c6-01
    There is one thing that you should keep in mind. It seems like there is no way to uninstall those apps (you can find people talking about this here in Nokia Support Discussions). Somebody correct me if I'm wrong.

  • Microsoft Apps in SW update (OTA)

    Hi Nokia
    Today I checked'up SW update app on my phone and see that there's update named 'Microsoft Apps'.
    So I wanted to know - what kind apps are they? Will be new Microsoft Office available for Belle users and how soon? 

    You can read more about Microsoft Apps from http://www.symbiantweet.com/microsoft-business-app​s-now-available-for-nokia-n8-x7-e7-e6-c7-c6-01
    There is one thing that you should keep in mind. It seems like there is no way to uninstall those apps (you can find people talking about this here in Nokia Support Discussions). Somebody correct me if I'm wrong.

  • Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Has your problem been solved by the updates??
    Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
    MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
    Microsoft Office 2011:  version 14.2.3
    Mountain Lion: 10.8.2 (12C60)

Maybe you are looking for