Message receipt time is incorrect-nokia 6500

I have a nokia 6500 slide with me. The problem that I am facing is as follows-
Whenever I receive a message it shows incorrect timing.for example if a message has been sent at 2.30 pm it shows the message time as 7.45am.I have called up nokia care regarding this.They have asked me to go to menu>setting>date & time and change the-Auto-update of time as-OFF.Then restart the phone.
I did the same, but even then whenever I receive any message the time shoing in it is still improper.I have also tried restoring factory setting, but even that didnt work.
Pls help

Right
Press the Navigation key.
Scroll to Settings and press the Navigation key.
Scroll to Date and time and press the Navigation key.
Scroll to Date & time settings and press the Navigation key.
If you're in the UK - select the time-zone as GMT +2 (if your clock is 2 hours behind.
If it's 3 hours behind, select GMT + 3, and so on.
Once you do this, then save it, and go back in and manually change your time to the correct time.
Then again, options and save.
If the time isn't exactly on the hour, behind the correct time, then the handset needs software updated which should be available from the following link.
http://europe.nokia.com/A4579163
Regards,
Ross

Similar Messages

  • Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message The server responded with \ 'HTTP/1.1 409 Conflict \'. can someone he

    Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
    The server responded with \ 'HTTP/1.1 409 Conflict \'.
    can someone help me

    Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
    The server responded with \ 'HTTP/1.1 409 Conflict \'.
    can someone help me

  • I get the following message every time I open my contacts on my iphone or iPad : "Password Incorrect. Enter the password for the Exchange account "Exchange"". If I enter my password, it does not accept it. I don't even know what it means.

    I get the following message every time I open my contacts on my iphone or iPad : "Password Incorrect. Enter the password for the Exchange account "Exchange"". If I enter my password, it does not accept it. I don't even know what this means.

    http://support.apple.com/kb/ht1212

  • Nokia 3120 classic (message received time is wrong...

    Hi.. got some problems with my nokia 3120 classic. I bought my fone 2 wks ago and decide to upgrade my fone to new firmware version which is 7.16, after the fone was updated i noticed that whenever i received txt messages, the received time is wrong.. it is i think 8 hrs late.. I'm txting my friends and when they reply, the received time display is wrong. Is this a bug for the new version? It's not synchronizing in my phone clock. Of course my phone clock is ok.. Message sent time is ok but the received time is wrong. Any suggestions? Pls help..
    Solved!
    Go to Solution.

    ok.. i've figured out already the problem. it's not on the software update but it is due to the GMT. i noticed that even your dates and time are correct, you must set your correct timezone from what country you were. if the auto update time and date is on, i think it varies on the timezone u set on ur fone so if your timezone is wrong, the message receive time is wrong too. well i already solved this.

  • OSX Mavericks & QT Error Message: Movie contains an incorrect time value

    Ever since I upgraded, I can not edit my QTime movies in Quicktime Player 7.  I keep getting
    Error Message: Movie contains an incorrect time value
    All the fixes I have read from the past blogs are not working.
    Is there a fix? If not, what editing software do I need to start using that is as easy as Quicktime 7 was?

    I figured out a work around, I trim the selection I want, then export to a MOV file with same settings (I have tried H264 and ProRes compression). I can then open that file to copy and paste.
    What a pain - I hope apple can update this issue somehow.

  • Nokia 6500 - Message Content

    Hello,
    Does the Delivery Reports in Nokia 6500 contain message content?  If not then, from where can the content of sent messages be checked except from "Sent Items"?
    Thanks in Advance.
    Regards.

    this is just them putting you off or trying to get more money as previous poster said it cant be affected [it needs to be unlocked] and firmware checked if up to date
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • What is new in Nokia 6500s update firmware ver. 6....

    What is new in Nokia 6500s update firmware ver. 6.6?
    Nokia N73. V 4.0812.4.0.1 Code: 0529786
    Nokia 6500 Slide V6.6 code: 0556234

    After updating mine yesterday...da screen refreshes or so flickers every say 5 seconds...plz any help
    i have reinstalled it three times... ..still no solution
    Message Edited by prubyholl on 04-Dec-2008 07:20 PM

  • Urgent help please NOKIA 6500 SLIDE

    for some stupid reason , i was told my memory was full and to delete some data or whatever, stupidly i did and now i have no tones, pictures, and lots of sentimental messages etc. !i have just got the stupid phone , its a nokia 6500 slide and is now practically useless.
    please help me, ill never drink again !!!!!!!!!!!!
    Message Edited by jintyj on 25-Feb-2008 09:28 PM

    Think I've worked it out now.. i had it on gmt, but i'd forgotton we are on british summer time so needed to add an hour for daylight saving.
    Thanks for your help.
    ah you beat me to it about daylight saving. Thanks againMessage Edited by gillh2 on 12-Oct-200711:08 AM
    Message Edited by gillh2 on 12-Oct-200711:09 AM

  • Nokia 6500s switch off automatically when in idle ...

    HI
    I was facing a screen flicks problem with my nokia 6500s , I went to customer care and they reloaded the firmware. But now my mobile switch off by itself when in idle state for more than 3 hours, I also tried to reset the phone, But its no use and it also asks to set date and time when I restart the mobile, but the wallpaper and theme I applied will be saved(settings will be saved including profile except time and date).
    Can u guys please help me what to do...
    Thanks
    Harish
    Message Edited by pharish2 on 24-Jun-2008 06:28 PM

    There are a few different way. Don't forget to backup your data first.
    First is FOTA (firmware over the air). Type the code *#0000# then goto Options>Check for updates. You will will need to go online for this so unless you have a data package ensure you are within range of your wifi.
    The other option is to use Ovi Suite or NSU.

  • Nokia 6500 - charger not supported

    just bought a nokia 6500 classic. first thing i know when i plug in the charger, i get a message "charger not supported". this is bizarre. nothing wrong with the charger itself, it seems, but a software quirk? anyone else with the same problem?

    I have a really bizarre problem:
    I bought the Nokia 6500 classic out of o2 earlier this year.
    My Dad also has the same phone but on T Mobile.
    Last night both our phones were low on battery, we use the same type of charger but have one each.
    When we plugged our phones in we both got a message on our phones saying 'charger not supported'.
    We swapped chargers but got the same message, I've tried charging the phones through the USB cable but this hasn't worked either, have taken the batteries out and put them back in but that was just wishful thinking, have left the phones on charge for hours and still nothing.
    Both phones are completely dead now apart from the occasional flash and then the screen just goes black.
    I've called o2 who have no idea what the problem is and have said to bring it into the shop, I also called T Mobile on behalf of my Dad who said the same thing.
    I tried calling Nokia but just got an ear piercing fax machine sound.
    My worry about taking them into the shop is that most likely they'll get send away and we'll have to wait decades to get the phones back or we'll be accused of dropping the phones etc.
    The thing is, it's nothing that we've done to the phones as this happened to the same phones on the same night at the same time and that's just too bizarre.
    If anyone can help it would be greatly appreciated!!!
    Thanks!

  • Error Message: "The parameter is incorrect" when trying to modify SSLs

    Like I wrote in my subject line, RoboHelp pop-ups the error message “The Parameter is incorrect” when I try to modify any SSL.
    What happens next, is that the “Print Document General” window opens, but does not allow me to select anything (the fields are blank).
    If I close the window and open it again, it seems to work until I have to select the styles from our Microsoft Word Template.
    Then the error message “The parameter is incorrect” appears again, and RoboHelp does not allow me to select anything but a stylesheet
    (which is not what I need).
    This is very strange, because not only  until recently I was able to build Word documents and PDFs, but also my colleagues are able to
    produce them out of my source.
    Even the old projects, that I was able to build, now I cannot.
    I do not have any problem in generating CHMs.
    Until now I have tried everything I found in the forum:
    I deleted the PSS file (also following the advice in your snippet number 14 from 10 – RoboHelp HTML –Features and Use).
    http://forums.adobe.com/thread/120022
    I reinstalled RoboHelp and the Adobe Technical Communication Suite (I also used CCleaner to delete the registries).
    http://forums.adobe.com/thread/598335
    I gave Administrator rights to all users in my computer (what seemed to work for some SSLs, but not for all)
    http://forums.adobe.com/thread/870339
    I am also looking at all programs that I installed since the last time I was able to build .docs in case there is a conflict, but I do not find anything!
    My computer has Windows 7 installed and I use the Adobe Technical Communication Suite 3.5, with RoboHelp 9.
    My Microsoft Office is 2010.
    Can somebody please help me? Did someone have the same problem?
    Thanks in advance.

    Hi there
    I know you said you reinstalled, but did you reinstall before or after you gave administrator rights to all users on your computer? And how many users *ARE* on your computer?
    Often you need administrator rights to properly install things.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Nokia 6500 slide - SMS writing language (chinese) ...

    Hi,
    Seek helps from all experts, I have recently updated my Nokia 6500 Slide firmware to 8.4. but unfortunately it cause some changes to my phone as the SMS writing language for Chinese characters has disappeared. Anyone could advise me on how to install it back to my phone?
    Thanks.
    Regards,
    Stevenzder

    the following sticky post should answer your question about why your chinese language disappeared.
    /discussions/board/message?board.id=swupdate&thread.id=29982
    you can visit the nearest nokia care point to have that additonal language added to phone.
    Fear not those who argue but those who dodge

  • Unlock my Nokia 6500 slide

    good evening,
    I bought a mobile (Nokia 6500 slide) with SFR in France. I missed six months and I wanted to unblock it but the code to disable the restriction, is not good and he told me that this is a problem that needs to be addressed at Nokia. So I would like to know steps to unblock it, thank you.
    Best regards
    Moderator Note: Imei number removed
    Message Edited by prodigy on 11-Jul-2009 01:54 AM

    I'm aware that SFR told you to contact Nokia, and they told you wrong.
    What you should be aware of is the fact that mobile network operators do not hesitate to lie to their clients to make themselves look clean and shift the blame for any wrongdoing to the manufacturer.
    If SFR got the restriction code wrong it is up to them to try again and get it right. SFR sending you to Nokia is not going to help because Nokia cannot generate the restriction code. These codes are the sole responsibility of the operators who enforce the SIM-lock, and the operators know this full well.
    Try SFR again, but don't let them send you back to Nokia. Be persistent. If the front-line customer service is unable to help then ask to have the matter escalated to someone with half a clue who might actually know what he or she is talking about.
    Also bear in mind that SFR are crooks as far as I'm concerned. They've tried everything in the book to extort money from me and succeeded on one occasion (charging me €7.50 for a PUK code given over the phone when no such code was given, I had the SIM-lock lifted from my phone more than 6 months after taking out the contract and it was supposed to be free).
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Flip/slide tone nokia 6500 slide

    hy, i need some help :-p, is it possible when i slide open/close my nokia 6500 slide to have a tone??? (ps: i tried with "Carbide.ui Theme Edition 3.4" to edit some themes to add different sound, but nothing )(and i have eanble other sound :-( ).i have tride a lot of themes ... nothing... no sound on flip slide!!! i even reinstalled the soft v 8.30!!! nothing!!!please help...

    hi mate
    i will be very thankful if you please send me this theme with slide tone...
    chase.
    Moderator's note: Email address removed as it is unwise to post a personal email address on a public forum.
    Message Edited by concordia on 15-May-2009 10:39 AM

  • Nokia 6500 Classic\Slide Firmware version 8.30

    I've recently installed firmware version 8.30 on my Nokia 6500 Slide, can anyone tell me what the changes are in this recent firmware version?
    Can't find anywhere what has changed in this firmware update, also not with Google.

    I have noticed a couple of things:
    1) When taking pics it looks like it has fixed the bug I had that I could not use the middle button sometimes when taking pics (was only intermittent)
    2) It has a really annoying message when fully charged to say 'remove charger to save energy' which is very annoying!

Maybe you are looking for