Message Receipts on Unity/Lotus

How do you turn off Message sent Receipt being sent to voicemail boxes in Unity.

You have to get a Lotus DB programmer to edit the nsf template to change it.
The problem comes where Lotus marks the receipts and voice mails both as "reports", thus when DUC looks at them, it seems them both as voice mail messages.
If I remember correctly, this was posted somewhere on this forum and it took me forever to find the answer; I'll search and see if I can find the original post.
[edit]Found one post that kind of helps:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd979cc
and a second:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd714ad

Similar Messages

  • I want to request a mail message receipt - how

    how can i request a mail email message receipt, or message read receipt , their must be a way

    Hi,
    This thread...
    http://discussions.apple.com/message.jspa?messageID=10849179#10849179
    may help you some. I hope so.
    Regards.
    Ian.

  • Message receipt failed

    Lately on my Samsung Brightside, I get a "quiet" ping and a message that says "message receipt failed".  I try to download the message manually and I get the same "message receipt failed" again.  It seems to be a picture that is trying to come in.  But I also receive other pictures just fine from the same senders.
    I asked at my local Verizon dealer, but they had no solutions except to say I really should be using a Smartphone.  I don't want a smart phone - I only need to talk and text.
    Any suggestions?
    Susiebill                         

    I have never been able to download the multimedia message no matter how many times I try.  I have usually just deleted them in frustration.  I have no issues when sending messages to any of my contacts.  Only in receiving mms occasionally.  I’m not sure what you mean about how they are stored – they are just in the message thread from a contact.
    I currently have one of these messages on the phone from Dec 13 and just tried again to download, but it didn’t work.  I rec’d one picture from this contact – then I replied with text only – and her next reply is MMS I can’t download.
    Thanks for trying to help me with this-
    Sue

  • Does OS X Mail in Leopard support message receipts?

    I haven't upgraded to Leopard yet...there's no compelling reason to do so for my purposes, but I can think of one reason that would make it worthwhile -- namely, if OS Mail in Leopard supports message receipts. Every message I send (in SeaMonkey's mail app) requests a "message displayed" receipt. Alas, recipients who use OS X Mail never even see the receipt request.
    For all its other virtues, the lack of receipt support will forever doom OS X Mail to being a mere plaything, not for serious mail users. I mean, OF COURSE you would want to know whether your message was received...DUH! It's incomprehensible to me that Apple has excluded that feature...well, through Tiger, at least.
    So, can anyone tell me whether OS X Mail in Leopard supports mail receipts? I can't find anything on the OS X Mail webpage that mentions it one way or another.
    Thanks!

    Matthew:
    Of course you're correct, but floba's observation is a bullseye; I'm well aware of Thunderbird, as a SeaMonkey user (and before that, the Mozilla Suite, and before that Netscape Communicator...back to v4.75 in System 8 and 9).
    No question — T'bird is a great mail application. I like SeaMonkey's mail app because of its tight integration with the Navigator browser as part of the same suite of web apps, but that's a matter of personal preference. I certainly can't fault Thunderbird's functionality. Except for browser integration (and of course the skin and layout), it has virtually all the same features that I like about SeaMonkey's mail and newgroups app.
    As you might know, Mozilla Foundation (MoFo) originally promoted T'bird as a mail app that "plays nice with the browser"...by which they meant Firefox. I always thought that was a bit odd, because for integration with the browser, there has never been anything better than the evolving Communicator/Mozilla/SeaMonkey suite, in my opinion.
    But it's no secret why they took that route. They wanted to break up the Mozilla Suite and repackage the browser and mail apps as standalone programs that could go head to head with Internet Explorer and Outlook Express. Firefox and T'bird are the result. They've been a huge success for MoFo, and they're fine apps in their own right. Ditto for Safari and Mail in OS X. I use Safari often. I'd use Mail more if it supported receipts.
    I still give SeaMonkey the edge for my purposes, but my needs are different than most folks. I rely heavily on SeaMonkey's Composer app, which is an invaluable research tool for creating and saving annotated web pages. It's a decent site builder too...and it has been available as the excellent standalone Nvu composer for some years now.
    Thanks!

  • Can I turn on message receipts for just certain people, not everyone?

    Can I turn on message receipts for certain people?  I don't want everyone I know being able to see when I've read their messages, just a few people.

    That setting only works for iMessages, and it's an all or nothing setting.

  • Message Receipt Failure - Multimedia

    I have a Samsung Intensity 2 phone with the Family Paln and unlimitied texing.  Recently when someone tries to send me a multimedia message (picture) I recieve a "message receipt failure" message, even from another phone on the same plan. I can see the text, jst not the picture. It was working fine...any ideas? Thanks

    Try updating your network PRL, *228 option 2.
    How large are the pics? Pic size and resolution may affect if your phone can receive them or not. Is your inbox full?
    Try doing a battery pull and see if that makes it work any better.

  • Message Monitor on Unity Connection

    Does anyone know if this feature is coming to Unity connection version 9.0 or anytime soon.  It is available on Unity but not Unity Connection and I have several clients interested in this feature.

    Does cisco realize that this makes users believe that a migration from Unity to CUC is a downgrade with less features? This is a battle I am fighting right now, as we migrated to CUC 8.6 three months ago. Message Monitor was a highly utilized feature among our users, and I'm having a difficult time convincing them that it is in fact an upgrade to a more stable platform.
    Users do not understand why Cisco took away this great feature. Very unfortunate.
    - Jonathan Beardsley

  • Message notification in unity 5.0

    Hi,
    This is vikram.I need some help for configuration of message notification in Cisco unity 5.0.
    My observation is if I leave VM for a user and the message notification is set to repeat or restart it delivers message immidiately.
    1-Notification is enabled
    2-it is set to restart notification 15 and initial notification 15-in this scenario IP phone immidiately got notofication
    3-same with repeat notification with setting 15 min
    4- What is initial notification means?
    5-delay settings are set to 3-4 .
    Please assist me in understanding the behavier of this.
    Regards,
    Vikram

    Hi Vikram,
    The settings (under Subscriber Template/subscriber) are described below;
    Notification Options:
    Send Initial Notification After How Many Minutes
    Specify the delay from the time a message is received until the message notification triggers (if the message matches the criteria selected in the Notify Subscriber Of section). You can space notifications on different devices at regular intervals, such as 15 minutes, to achieve a cascading message notification effect.
    If the delay time takes the notification out to a time when the device schedule is no longer active, the notification does not take place.
    The range for the delay field is 0 to 120 minutes. The default is 0 minutes.
    If Device Does Not Answer
    (not available for text pager or Cisco Unity Inbox notifications)
    Indicate settings for the following:
    •Wait for How Many Rings Before Hanging Up—Set to a minimum of 3 rings. Choose a higher number to give a subscriber more time to get to the phone.
    •Try Again How Many Times—Choose a higher number to reach a subscriber who steps away from the phone briefly. Choose a lower number to avoid disturbing others.
    •How Many Minutes to Wait Between Tries—Choose a higher number to reach a subscriber who is away from the phone for long periods of time.
    http://72.163.4.161/en/US/docs/voice_ip_comm/unity/401/administration/guide/ex/SAG_0140.html#wpxref64565
    Cheers!
    Rob
    Please support CSC Helps Haiti
    https://supportforums.cisco.com/docs/DOC-8895
    https://supportforums.cisco.com/docs/DOC-8727

  • Anyone know what this error message means in Unity?

    Last Category An attempt to access Exchange Private Store has failed: 80040111. The MAPI subsystem return the following error: The information store could not be opened.

    Hi,
    That is a MAPI logon failure. You can always check the meaning of this error messages for Unity 4.0(X) using the following link:
    http://www.ciscounitysupport.com/findDohError.php?Hexcode=80040111&Source=All
    -Luis

  • Message receipts setting?

    Hi, I would like to get receipts for the text messages I send. Others have said to change this in message settings. But the option doesn't appear in message settings. The only options that appear are:
    iMessage
    MMS Messaging
    Group Messaging
    Show Subject Field
    Character Count.
    Whats strange is that my wife has an identical iPhone running the same iOS version (5.1.1) - but her message settings DO include the option to set receipts.
    Thanks!

    If you are using iMessage and the person with whom your are iMessaging has enabled read receipts, you will get them. You can't enable read receipts for other people and there are no read receipts for standard text messages, it is possible that your wife has iMessage enabled and you don't. Do you both have the same version if iOS? You need to have iOS 5.x to have the iMessage function.

  • Message receipt time is incorrect-nokia 6500

    I have a nokia 6500 slide with me. The problem that I am facing is as follows-
    Whenever I receive a message it shows incorrect timing.for example if a message has been sent at 2.30 pm it shows the message time as 7.45am.I have called up nokia care regarding this.They have asked me to go to menu>setting>date & time and change the-Auto-update of time as-OFF.Then restart the phone.
    I did the same, but even then whenever I receive any message the time shoing in it is still improper.I have also tried restoring factory setting, but even that didnt work.
    Pls help

    Right
    Press the Navigation key.
    Scroll to Settings and press the Navigation key.
    Scroll to Date and time and press the Navigation key.
    Scroll to Date & time settings and press the Navigation key.
    If you're in the UK - select the time-zone as GMT +2 (if your clock is 2 hours behind.
    If it's 3 hours behind, select GMT + 3, and so on.
    Once you do this, then save it, and go back in and manually change your time to the correct time.
    Then again, options and save.
    If the time isn't exactly on the hour, behind the correct time, then the handset needs software updated which should be available from the following link.
    http://europe.nokia.com/A4579163
    Regards,
    Ross

  • Unity 7 Voice Mail Message Details

    Just wondering if there is a tag in the message that a Unity Administrator can retrieve in order to find out if the message was delivered with an Automated FWD with a future date and time.
    We had one user reported that they received an old test message that they sent themsleves from a long time ago but just came up in their inbox. I'm assuming they put a delivery time stamp to reflect a future date and time but they don't remember.
    Thanks,
    J

    So for the 2nd scenerio you would want to check what your Message Subjects were set to.  For Unity 7 open Web SA, click Configuration and then Message Subjects.  Make sure that the Outside Caller Message has %CALLERID% in it somewhere.  The value %CALLERNAME% will return unknown if we do not receive a name from the PSTN.
    Try setting the Outside Caller Message to:
    %U% %P% Voice Message from %CALLERID%
    and that should get you your desired results.
    The default Message subject is:
    %U% %P% Voice Message from %CALLERNAME% (%CALLERID%).  So with that it would say Voice Message fom Unknown (xxxx) if it was not able to determine the name of the user which is usually normal from a PSTN call.
    Just to note, the From address is always going to say from Unity Messaging System, it will only be the subject that has the extension in it.
    Bryan

  • Messages in Mail are gibberish (Mail 2.1, 10.4.7–inbound from Lotus 6.5.1)

    All other messages come thru fine but I'm having issues getting messages from clients using Lotus Notes 6.5.1
    We're running 10.4.7's Mail 2.1 and our email server is Communigate Pro.
    This isn't a font issue as the text actually has a repeatable pattern to it as opposed to being total gibberish- we've already run font cache cleaner too just to be sure, and we've tried it on a new account on a fresh installed machine as well just to be sure.
    When using web-mail however, the messages are fine, and when using Thunderbird the messages are also fine.
    Has anyone seen this before? Any ideas?
      Mac OS X (10.4.7)  

    Matthew,
    I don't correspond with anyone using Lotus. Are you using a POP account, or IMAP account with this server?
    I am not very expectant of this helping, but open one of these messages, and then click on Message in the Menubar, and in its pull-down place the cursor on Text Encodings, and try some choices, other than Automatic. Test first with Unicode at the bottom of the list, and then with Western (Mac Mail). Let us know if this alters anything.
    Next, after opening such a message, click on View, place the cursor on Message, and choose Raw Source -- is the text of the message now readable?
    Ernie
    Ernie

  • Unity Connection 8.5.1 Unified Messaging w/ Exchange

    Hi,
    I'm just checking out the new Unified Messaging features of Unity Connection 8.5.1 and notice that you can specify multiple Unified Messaging Services pointing at different Exchange deployments (and then when setting up Unified Messaging Accounts select which UMS applies).
    My question is, is there any limit as to how many Unified Messaging Services (e.g. how many different Exchange organisations) you can point a single Unity Connection server at?
    Thanks,
    Dan

    Hi Dan,
    Taken from the UC Design Guide:
    "There is no hard limit on the number of unified messaging services that you can create, but maintenance becomes time-consuming when you create more than a couple of dozen."
    http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/8x/design/guide/8xcucdg032.html#wp1118442
    HTH,
    Chris
    Please rate helpful posts

  • Cisco Unity Express 8.6.6 Voice Mail not deleting when e-mail with attachment deleted

    I have a Cisco Unity Communications Manager rel 9.1.2 that supports a remote location with a Unity Express rel 8.6.6 voice mail service module in the voice gateway to insure if WAN goes down the location still has voice mail. We have Voice Mail to E-Mail working. The problem is that when the e-mail with the voice mail is deleted the message stays in the Unity Express Voice Mail Box. All of our local users on the same Call Manager Cluster using a local Unity Connection Cluster rel 9.1.2 have the voicemails deleted when the e-mail is deleted.
    How can I resolve this issue?

    Found another post that referenced Cisco Bug ID CSCti37610.
    CUC plays message is from Unity Connection Messaging system
    Symptom:Before message playback, Unity Connection plays the message is from Unity Connection Messaging System instead sender's ANI
    Conditions:Problem was observed on Unity Connection cluster and appropriate services are not rebooted after changing the SMTP domain name
    Workaround:
    Restart the Unity Connection servers
    It should have been fixed in 8.5 but we did change the SMTP domain name on 8.6 and now see the problem. Will schedule a reboot and see if the issue goes away.

Maybe you are looking for