Message received:   icloudexe.entry point not found.  Do you know how to fix?

message received:   icloudexe.entry point not found.  Do you know how to fix?

Try a system maintenance utility like Yasu:
http://jimmitchell.org/projects/yasu/
Free for use, though the developer accepts donations.
Most likely you need to repair permissions and Yasu will do that for you and some other general housekeeping.

Similar Messages

  • When trying to use MobileMe I am getting an error message: AppleSyncPref.exe - Entry Point not found  Can you help?

    When trying to use MobileMe I am getting an error messgae: AppleSyncPref.exe - Entry Point not found  Can anyone assist?

    MobileMe no longer exists...that system was discontinued and merged into iCloud.
    Your old MobileMe email addresses shoule still be valid, or convert into some form of user@ me .com or icloud . com.

  • When starting my computer I get the error message "AppleSyncNotifier.exe Entry point not found. this has only appeared since my last upgrade.

    Since recently upgrading to the latest ITunes,on start up I get an error message:
    "AppleSyncNotifier.exe Entry point not found .
    Procedure entry point xml TextReader Constname could not be located in
    the dynamic link library libxml2.dll"
    Any body come across this? Any solutions? 

    Doublechecking, Dad:
    I have also reloaded all other iTunes software.
    Did you use the following document as a guide?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

  • TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    I think my problem is fixed now.
    For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
    A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
    I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
    So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

  • When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    Any answers how to fix it? All Im getting is error for the past 3 days!

  • When I turn on my computer I get the message APPLESyncNotifer.exe   Entry Point not found.

    Have a 5th generation nano and when I connect to my computer I get a message APPLESyncNotifer.exe  Entry Point Not Found. Not a computer geek so I am stumped. Anyone out there who could help? I have reinstalled ITunes and restarted my computer to not avail.

    Copying & pasting SQLIte3.dll worked out well for your computer?
    Just read your trouble with your iPod nano 5th generation & Windows PC, how about trying the one I found on this community before?
    Click the start button and type in 'msconfig' in search, and, in system structure utitily, click on the tab of 'startup' and check off the box of 'AppleSyncnotifier.exe' and reboost your system.(You have to follow down till the end of the place of the file.) That'll solve your trouble.
    I don't know you connect iPad or iPhone at all, that may change the solution? Hoping this suggestion also work out for you & your PC.

  • Error Message: EdgeAnimate.exe - Entry Point Not Found

    I'm running 64 bit MS Vista Ultimate. My original download of Edge Animate ran okay . However after running the most recent update, Edge Animate will no longer launch. Below is the error message:
    EdgeAnimate.exe - Entry Point Not Found:The procedure entry point GetGestureInfo could not be located in the dynamic link library USER32.dll.
    Any one have a fix?

    This was reported last week in the Edge Animate forum by Vista users
    http://forums.adobe.com/message/5074933
    Adobe Edge developers says they're aware of it but no fix yet that I have seen.
    I suggest you join that thread and monitor developments there.

  • Updated itunes and getting errors messages: iTunes.exe-Entry Point Not Found

    After updating itunes, I get the message iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
    Then another error message tells me: iTunes not installed correctly. Please reinstall.  Error 7 (Windows error 127). I've tried to repair which looks successful until I try the desktop shortcut as well as going into the exe file in program files. Still the same message.  Operating a windows XP service pack 3 with 32 bit. Help would be most appreciated.--No problems with itunes until this recent update.

    iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • Anyone had this error message AppleSyncNotifier.exe - Entry point not found?

    I use a windows 64bit laptop with Itunes. Recently I have been receiving an error message titled "AppleSyncNotifier.exe- Entry Point Not Found". The sub text is "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll" I am not sure why it is appearing and I cannot tell what is happening.  Anyone have any suggestions? And yes I have removed, installed, removed, installed and removed and installed ITunes for 64bit. Your advice welcomed and appreciated in advance!

    Doublechecking, Dad:
    I have also reloaded all other iTunes software.
    Did you use the following document as a guide?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

  • Error Message -Entry Point Not Found -Can you help me?

    When I open up my Photoshop 6 Elements I get this error message:  
    "  Entry Point Not Found- the procedure entry point-CFBundle Copy File Type For File Data could not be located in the dynamic link library core Foundation.dll "
    I can click the OK option 3 times and the message disappears and I am able to work in Photoshop. 
    Can anyone tell me what this erro message might mean?
    Thanks!

    I am receiving the exact same message when I open Photoshop Elements 6.0.  ADOBE:  PLEASE respond to our requests and post the fix for this.
    Also, to whoever runs this forum, please do not indicate that this question has been answered in any way.
    thank you.
    frustrated

  • After LV 5.1 install, get message, "nimax.exe-entry point not found."

    Just installed LV 5.1 on customers PC. She already has LV 6.1, and 7.1 installed. Upon reboot, at login screen, the error message below occurs:
    "nimax.exe-entry point not found"
    "The procedure entry point?GetVirtualChannelObjectOnServer@CNIConfigData@@QAEKPBD0@Z could not be located in the dynamic link library nidaqcfg.dll."
    I have tried installing the latest version of MAX. No luck. Any help would be appreciated.
    Mark
    Attachments:
    Ann's.doc ‏30 KB

    Hi Marxs,
    My first suggestion would be to avoid installing LabVIEW 5.1 if possible. This for a few reasons...
    LabVIEW 5.1 has the option to install DAQ with LabVIEW. If you elected to install NI-DAQ with the LV 5.1 install, you will run into driver conflict problems.
    If you want to use DAQms with LabVIEW 7.1, you will need to install NI-DAQ 7.1, 7.2 or 7.3. You can also use NI-DAQ 7.3 with LabVIEW 6.1. However, NI-DAQ 7.3 will NOT install support for LabVIEW 5.1. This means that you will not be able to use your DAQ devices in LV 5.1.
    If you need DAQ for LV 5.1, you will need to go back to NI-DAQ 6.9.3. This version will work with 5.1 and 6.1, but you will loose functionality in LabVIEW 7.1.
    My suggestions would be as follows:
    -- uninstall LabVIEW 5.1 and all versions of DAQ that are on the machine
    -- re-install LabVIEW 5.1 but choose the "custom" and elect NOT to install DAQ
    -- Install NI-DAQ 7.3 and have support for 7.1 and 6.1 (no support for 5.1 is available)
    Basically, when you try to mix these very old versions of LabVIEW and DAQ with the newer stuff you will run into driver conflicts that can be unpredictable.

  • I'm getting the following error message: AppleSyncNotifier.exe - Entry Point Not Found.  What do I do?

    I recently upgraded the o/s to 4.3.5 but now get the following error message, what do I do?
    AppleSyncNotifier.exe - Entry Point Not Found
    The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

    Hi Molly - I can tell you're frustrated and I will do my best
    Can you tell me whether you have a 32bit or 64bit system. You can find out in the following way
    Windows Vista or Windows 7
    If you have Windows Vista or Windows 7, there are two methods to determine whether you are running a 32-bit or a 64-bit version. If one does not work, try the other.
    Method 1: View System window in Control Panel
    Click Start, type system in the Start Search box, and then click system in the Programs list.
    The operating system is displayed as follows:
    For a 64-bit version operating system: 64-bit Operating System appears for the System typeunder System.
    For a 32-bit version operating system: 32-bit Operating System appears for the System typeunder System.
    Method 2: View System Information window
    Click Start, type system in the Start Search box, and then click System Information in thePrograms list.
    When System Summary is selected in the navigation pane, the operating system is displayed as follows:
    For a 64-bit version operating system: x64-based PC appears for the System type under Item.
    For a 32-bit version operating system: x86-based PC appears for the System type under Item.
    If you have a different OS (operating system) let me know which one and I'll tell you how to find that out.
    Once I know I should be able to give you the fix.
    Cheers

  • I keep getting error message "AppleSyncNotifier.exe - Entry Point Not Found" every time I start up my computer. How can I fix this

    I recieve this message every time I start my computer, AppleSyncNotifier.exe - Entry Point Not Found. How can I fix this?

    No problem.
    You can either get it via Apple Software Update ("Start > All Programs > Apple Software Update" ... it'll appear in the "New programs" section) or by downloading an installer from the following page on the Apple Website:
    http://support.apple.com/kb/DL769

  • When I log on my computer I receive an error message: apllesyncnotifier.exe entry point not found. Does anyone one know how to fix it?

    Error message when I log onto my computer.
    Does any one one know how to fix this error?
    It states: The procedure entry point Sqlite3_wal_checkpoint could not be located in the dynamic link librery SQLite3.dll

    With that one, I'd first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

  • When I turn on my computer I get an error message; AppleSyncNotifier.exe Entry Point not found. What do I do to fix it?

    When ever I log onto my computer I keep getting this error message.
    AppleSyncNotifier.exe - Entry Point can not be found. Something to do with an SQLite3.dll file. Does anyone know how to fix this?

    Hi Molly - I can tell you're frustrated and I will do my best
    Can you tell me whether you have a 32bit or 64bit system. You can find out in the following way
    Windows Vista or Windows 7
    If you have Windows Vista or Windows 7, there are two methods to determine whether you are running a 32-bit or a 64-bit version. If one does not work, try the other.
    Method 1: View System window in Control Panel
    Click Start, type system in the Start Search box, and then click system in the Programs list.
    The operating system is displayed as follows:
    For a 64-bit version operating system: 64-bit Operating System appears for the System typeunder System.
    For a 32-bit version operating system: 32-bit Operating System appears for the System typeunder System.
    Method 2: View System Information window
    Click Start, type system in the Start Search box, and then click System Information in thePrograms list.
    When System Summary is selected in the navigation pane, the operating system is displayed as follows:
    For a 64-bit version operating system: x64-based PC appears for the System type under Item.
    For a 32-bit version operating system: x86-based PC appears for the System type under Item.
    If you have a different OS (operating system) let me know which one and I'll tell you how to find that out.
    Once I know I should be able to give you the fix.
    Cheers

Maybe you are looking for

  • External Hard Drive not in finder, but in Disk Utility, info gone? recover?

    My external hard drive shows up in disk utility, but not in finder. Usually, in disk utility, there will be visible the model/make of the hard drive (such as 232.8 GB MDT MD25...etc), and then below that, there be the actual name of the hard drive th

  • Transport Tool Not able to connect the DB

    Hi, When i check the  Transport Tool in STMS i got  this  problem :   Link to database failed This is tp version 372.04.08 (release 700, unicode enabled) ERROR: No connect due to DbSl Load Lib Failure ERROR: environment variable dbms_type is not set.

  • Database notifications

    Is there any database notification functionality in XI JDBC adapter? What I means by notification is, as soon as record got inserted, updated and deleted, that record should be sent to XI immediately. Is there a configuration for that?

  • Cannot update version 4.3.5 to 5.0.1

    Hi, My ipod touch 8 GB cannot update from 4.3.5 to 5.0.1 I tried with Windows 7 32bit and Windows XP 32 Bit. itunes downloads newer version but when it start to update, it gives attached  error. Dunno what to do !

  • Adobe Reader XI does not open

    Why won't my adobe reader open and read PDF files. It is very annoying