Message record list
Hi Experts,
is there a T.code or Table to list all the message record for a output type?
Thanks,
Emily
hi
as all the master records are for different object u cant see them at a time in single transaction
so go to SE16 here give table NAST dont give any application area and execute
regards
KI
Similar Messages
-
Hello All,
Working on MII12.1.6 Build 96, NW7.1 SP03
With my user name, I'm logging to MII on 2 different workstations, at the same time.
1st one is showing the messages received on the defined listeners in the Message Monitor.
2nd one showing "No data was found in result" ..
On the two stations we have the same browser versions, same JRE level, same everything (standard clean setup).
Anybody seen this happening before? What are your suggestions for the steps I should take to display the messages received by MII in the Message Monitor on both workstations using the default search pattern (i.e. all messages on all listeners, all types of message statuses)?
many thanks,
paul.Hi Paul,
we have experienced something similar (empty Message Monitor list). It was due to different language settings in the NetWeaver UME user setting and the browser. Maybe you check if the language settings of the workstations and are different.
Michael -
Error in SXMB_MONI - "Message Recorded (Commit Missing)"
We have implemented BADI BADI_LE_SHIPMENT~BEFORE_UPDATE to call asynchronous proxy to send a message to PI system. This proxy is called inside a loop to send message for each delivery in the shipment. Some messages are successful and some are in scheduled status with error 'Message Recorded (Commit Missing)'. This error is coming only for particular interval and we dont see any PI outage at that time. And also we do not see any entries in queue(SM58, SMQ1, SMQ2). Searched in SDN, people are suggesting to use commit work after the proxy call but I am concerned to use commit inside a Badi. I have more than 1000 messages in production, can not reprocess all the messages manually from SPROXY. Please give me your suggestion to resolve this issue.
Hi,
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
After that please register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
Regards,
Pradeep A. -
h:messages layout="list" ... but no list
Hi
I want to display all form error messages at once as a list
so I have <h:messages layout="list"> at the top of my form.
According to docs layout attribute is explained as:
The type of layout markup to use when rendering error messages. Valid values are "table" (an HTML table) and "list" (an HTML list). If not specified, the default value is "list".
When I look at the HTML source, there is no list produced..
no UL with LIs.....
Any idea?Just to add some more info regarding this issue:
1. if you dont specifgy the layout it uses table and renders correctly.
Hi
I want to display all form error messages at once as
a list
so I have <h:messages layout="list"> at
the top of my form.
According to docs layout attribute is
explained as:
The type of layout markup to use when rendering error
messages. Valid values are "table" (an HTML table)
and "list" (an HTML list). If not specified, the
default value is "list".
When I look at the HTML source, there is no list
produced..
no UL with LIs.....
Any idea? -
h:messages layout="list" -- Not rendering as a list
Hi all,
I'm trying to use <h:messages layout="list"/> in order to display my error messages as a list on the screen, but what I get are my 2 error messages one after the other, no delimiter and on the same line as this:
Please select a template.Please selecte the time.
I didn't see that bug in the JSF bug database, does anyone know if it's taken in care?
Thanks!
P.S. I am using the latest version of JSF.I've entered this as a bug.
-roger -
IOS 8.1 Text Message Forwarding lists same device twice
Background: iPhone 6 w/8.1, Retina MacBook Pro 15" w/Mavericks upgraded to Yosemite, iPad 2 w/8.1
I got a new MacBook Pro prior to the Yosemite release and upgraded it before migrating my data. Set up iOS 8.1 and everything was working fine. I decided to migrate my user account from my old MacBook Pro to the new one and after that, it is listed twice in the iPhone's Messages>Text Message Forwarding list. How do I remove the duplicate one? I only have one turned on. I'm afraid if I turn both on I'll get duplicate messages. Any ideas? Thanks!I'm having this same issue. I tried turning iMessage on and off on both my iPhone and my MacBook Pro, but that did not solve the issue. It still shows my MacBook Pro twice. I did try to enable text message forwarding on both, and I noticed I only received the code for one.
-
Dynamic update if multi-record list item.
I have a bunch of multi-record list items whose poplist I need to update with queried data at the WHEN-NEW-ITEM-INSTANCE triggers,
At NEW-FORM-INSATNCE trigger I queried and filled all the poplists with no problem. The problem occurs at the WHEN-NEW-ITEM-INSTANCE triggers.
I have a clear_list() before each add_list_element() from a runtime record group. The problem is that the poplists at the cursor record is updated correctly, when I click on the same list item at other records, the list repeats -- meaning (probably) it was not cleared before being populated. Is there a way to either (1) just populate the list item of the current record, or (2) clear all records of a list item before all records are populated.
I tried copy( NULL, current_ilist ) where current_ilist is the item name before add_list_element(), but I got errors because the list items are required fields. Besides, the item has queried data in it.
I'm thinking about changing the item property to optional, save the item value, set it to NULL, populate its poplist, restore it's original value and then change the item property back to "required'. I don't know if it would work but is there a more elegant way of doing it?
Any suggestion will be appreciated.Hello All,
Just in case nobody saw this, thought i might post it again.
would abybody have any pointers,
easo -
PO Output Message Record - Locked indicator is ticked
Hi,
Requirement: Create the output message records automatically, when PO is created/changed and saved.
Current Setting: Condition records(MN04) for the repsective output type are maintained. Output message record is created automatically and allows the printing when the PO's are created.
Issue: Output message records are created and trigerred when the PO's are created but there is an issue when the PO's are changed. Whe the PO is changed, output message record is getting created but it couldnot be processed as the Locked indicator is set for some reason.
Please guide me if I had missed any of the settings which is stopping me here at this point.
Please guide!!!
With regards
KrishnaHi
There could also be possiblity that if PO is subject to release and PO is not compltely released
the Lock will remain checked
Partha -
Record list: add table border
Using the generator preference "Record list: add table border". I have a problem getting this to work on a single module. The module will not get a border regardless of the setting (Yes/No).
On a different module in the same application system the preference does work.
What could be the problem?I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work. -
Outbound Proxy - Message Recorded(Commit Missing)
Dear All,
The proxy's are configured correctly, and when tested the message getting created with status as Message Recorded(Commit Missing).
SLDCHECK transcation is also sucessfull!
No application Log exist at transaction SLG1!
What could be the reason for message not processed further?
Thanks & Regards,
Jilan BhashaDo the messages in ur ECC sxmb_moni show a green flag...oif so it a simple commit use..
Write this code at the end of your Proxy call -
Commit work.
regards,
arvind R -
Text message distribution list
How do I set up a text message distribution list on an iPhone 4S?
You don't. There are, apparently, apps that purport to do that in the App Store, though.
-
XML Status : 'Message recorded, commit missing"
Hi,
I am calling my proxy in a BADI. After triggering it, when I go and check in SXMB_MONI, the status of XML message is "Message recorded, commit missing". And it is in Scheduled status.
Could you please let me know, why this message will come, and how to make it run successfully.
Thanks,
SandeepI think you are gettking this error in transaction SXI_MONITOR in ERP system. As replied earlier by Divyesh, you need to write commit work statement in ur BADI after calling the proxy method.
If you test this proxy from transaction SPROXY, then also u will see this error with ur message and u need to trigger Commit work/Rollback explicitly to send message to central PI server. While testing ur proxy from SPROXY u can trigger Commit/Rollback from menu
Extras - > Trigger COMMIT WORK / Trigger ROLLBACK WORK -
How can i restore my text message record
Hi,
i have lost text message record while backup in i cloud can any one advice me how to restore text message from device or i clouds.
thankshttp://support.apple.com/kb/HT1808
-
Messages blocked list, too many entries
For some reason, my Messages blocked list has like 20k entries, and now every time I open the Preferences for Messages on OSX, it just hangs and crashes. There's nothing wrong with the Messages app, but I can no longer use the Preferences dialog. Is there any way I can clear out the blocked entries from Terminal? I'm comfortable with running shell commands!
Back up all data.
Quit Messages if it’s running. Force quit if necessary. After each of the following steps, restart the computer and test. If the problem isn't resolved, quit again and go on to the next step.
Step 1
Make sure you know the ID and password you use with iMessage.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
From the menu bar, select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
From the Category list in the lower left corner of the window, select
My Certificates
Look carefully at the list of certificates in the right side of the window. If any of them is marked with a red "X" as expired or invalid, delete it. Also delete all items with "iMessage" or "com.apple.idms" in the name, whether valid or not.
Now select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Next, select
Passwords
in the Category list. Enter "ids" (without the quotes) in the search box in the toolbar of the window. Delete all items of type "application password" that have a name beginning in any of the following ways:
ids:
IDS:
com.apple.ids:
Quit Keychain Access. Log out and log back in.
Step 2
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
Containers/com.apple.corerecents.recentsd
Caches/com.apple.Messages
Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
Containers/com.apple.iChat/Data/Library/Caches
Containers/com.apple.soagent
IdentityServices
Leave the Library folder open.
Step 3
Go back to the Finder and move the following item from the open Library folder to the Desktop:
Messages
Note: you are not moving the Messages application. You’re moving a folder named “Messages.”
If Messages now works, delete the Messages folder on the Desktop. Otherwise, quit Messages again. Put back the folder you moved, overwriting the newer one that may have been created in its place.
Step 4
In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
com.apple.iChat
com.apple.ids
com.apple.imdsmsrecordstore
com.apple.imessage
com.apple.imservice
Move them all to the Desktop. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again. This time Messages should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes Messages to malfunction. Delete those files and recreate whatever settings they contained.
If the issue is still not resolved, quit Messages again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post your results.
If you later decide that you don’t like the results of Steps 3 and 4, you can undo them completely by quitting Messages and restoring the items you deleted in those steps from your backup. -
Hi
I am creating a Schedulling Agreement i have entered all the necessary datas.
When i am trying to save the Agreement. System throws an message as
" No Message Record Found"
Can any one help on this. maximum mark will be awarded.
Regardshi
before doing the GR you have to maintain delivery schedules thru me38 and then relaese them thru me84 .After relaesing u hav to transmit them thru me9e.
Now for relaesing the schedule lines u need to maintain message type in MN10 LIKE lph1, lph2 etc.
there u also define to whom partner that shud goand whether u want to send it thru EDI or print out.
So just maintain msg in mN10.
Hope it helps
reward if useful
Rohit
Maybe you are looking for
-
i have just plugged my i phone 4s into my computer and it automatically synced with i tunes, i tunes for some reason removed all the apps and backed up my phone automatically. ive gone to put my apps back on and its showing me an automatic flash up m
-
Travelling with access to no external drive - show what's available now
Ok this is kinda like another unanswered post I have. If I am travelling with my MB and want to listen to my music in itunes it still shows my entire library which is 80% not available because its on an external drive at home. How do I get itunes to
-
Sending form as pdf attachment instead of xml
I have created a form for the web where clients may fill it out and submit it to an email address. I had hoped this would be a pdf file, but it is coming as an xml file. How do i change it to pdf? Thanks in advance. Bob
-
Unable to export picture in AdobeRGB(1998) and 8 bit.
Hi all Im trying to export a picture from Lightroom with the following file settings: - TIFF - AdobeRGB (1998) - 8 bits/components When the picture file is exported is instead has sRGB and 24 bit in the settings. Im not quite sure where it goes wrong
-
Best way to assign timestamp in coherence?
What is the best way to assign a timestamp to an object when it is added to a cache? Should I just do this or is there something more efficient? public class NewOrderTrigger implements MapTrigger { public NewOrderTrigger() { public void proce