Message reprocess from SXMB_MONI

Hi Friends,
We had a scenario like file sender to JDBC receiver and in Message mapping we read the file name and from file name we will take the country code with substring and map to target field.
Now the problem is: when message failed at PI, we are not able to restart the same from SXMB_MONI and also not able to reprocess from RTW because if we process from RTW, we will not get file name at runtime which fails at Mapping.
So please let me know how to reprocess the failed message from SXMB_MONI or some another options if have.
message is synchronous and QOS is EO. Mesage status at SXMB_MONI: system error-manual restart possible
Thanks in Advance.
Regards,SARAN

Mesage status at SXMB_MONI: system error-manual restart possible
why are you not able to restart the message from SXMB_MONI?
the message clearly says you can.

Similar Messages

Can Synchronous messages be reprocessed from sxmb_moni. Pls help

Hello
Can Synchronous messages be reprocessed from sxmb_moni
or from any other transaction like we reprocess asynchronous messages.
Pls advice

Rick, it cant be done from XI for Sync messages, Raj is right. When you think about it:
normally sender sends a sequest and waits for a response. But here you'd send the message form middleware, so sender does not await anything, because it didn't send any request... So what would it do with the response?
If you explain us your problem in deeper detail , maybe we could advice you some other solution. This is definetely not a way.
Peter

Outbound Message Missing from SXMB_MONI IN ECC

Dear PI Experts,
I have created IDOC to File scenario, But I am facing error when i am sending data from idoc using tcode we19 .
ERROR is whenever
I have checked tcode SXMB_MONI IN ECC server but XML message is not showing in this tcode ,whereas XML message is showing in tcode SXMB_MONI of PI server .
Please help me .

Hello Diptee ,
I have checked both case of IDOC and screenshots are referenced .
Case 1 .
Tcode BD10 ,
Case 2 .
Tcode WE19,

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

Message sent from RWB but not reflected in SXMB_MONI

Hello Experts,
I have a SOAP - RFC synchronous scenario. I am sending a message from RWB to PI system.It shows message sent in RWB and the message details are reflected in the RWB->message monitoring ->Adapter Engine as 'Successfull'. But no in RWB->message monitoring->Integration Engine.
The message does not reflect in SXMB_MONI either. All other scenarios are working fine except this.
Also on checking the status of Sender communication channels in RWB it shows 'yellow' with reason channel may be inactive or unitialised. Whereas i have checked the communiaction channels in ID, their status is Active.
Kindly advice a solution.
Thanks in advance,
Elizabeth.

Hi,
Your message processed from sender adapter. But seems there is some problem in reaching IE. Check out your wsdl file. check when define a web service, have u given right url. Is it like this
http://[server]:[port]/XISOAPAdapter/MessageServlet?channel=:[sender communication channel service]:[sender communication channel name]
and also make sure whether you given the right http port name, sender business system name , sender message interface in the following step of define web service. and the port name is important you can fine http port for your PI server by going to SMICM tcode. in that press shift + F1
You altova xmlspy software for testing purpose. You can download free 30 day trial version from altova website. once you installed in it.
Go to xmlspy software. the menu you can find a "SOAP". underthis menu you can find create soap request. select that it will ask the wsdl file. give the wsdl file which you are created in define web service step. after that in xmlspy
menu->soap->send request to server. then it ill ask user name and password to connect with the PI server. then you will get the rfc response if u successfully connected with PI sever.
for more details,
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID1437447550DB12110496670821140257End?blog=/pub/wlg/4550
but in this website they didnt use xmlspy some other third party software. good luck
Regards,
Balaji

Restarting synchronous messages from sxmb_moni

Hi,
Please could anyone confirm if it is possible to restart synchronous messages from sxmb_moni.If in case the synchronous message is in error in moni,can it be restarted.
Thanks and Regards,
Induja

hi,
check these links:
/people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages,
Is Payload of SXMB_MONI stored in Some table?
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Thanks,

** List of RFCs to retrieve messages from SXMB_MONI

Hi friends,
I found only one RFC 'SXMB_SELECT_MESSAGES' to retrieve messages from SXMB_MONI. But, this RFC returns only message id.
Could you kindly tell RFCs or classes other than this which will be usefull to retrieve XML Payload and other things ?
Kind Regards,
Jeg P.

Hi,
There is a function module SXMB_GET_MESSAGE_LIST through which you can get the messages in SXMB_MONI.
Refer the below thread for more detail:
In Which Database Table the Messages are Stored in XI
Thnx
Chirag
Edited by: Chirag Gohil on Feb 15, 2008 6:13 PM

Delete single message from SXMB_MONI

Hi There,
I want to delete a single errored message from SXMB_MONI, please help
Regards,
Nishant

Hi Nishant,
Unfortunately there is no option to do so in Integration Engine (SXMB_MONI)..
only with the archiving job scheduled based on retention period will do so
Rajesh

Message scheduled in SXMB_MONI(Queue status is stoped)

Hi experts,
Here my scenario is Proxy to file. I am sending the 20 .. 30 ..messages at a time from ISU system using proxy to XI. In ISU sender system Under sxmb_moni some messages are failed with errors. after this all messages are in scheduled mode(this is not in XI). scheduled messages are not at all executing.. here i registered all queues.
Please give me the solution how to reprocess the messages.
thanks
Srinivas

hi ,
1) Here i am selected message processing mode EOIO. which one is good EO or EOIO for process the messages asynchronously. If i choose EOIO I have to give queue name right? What name i have to give?
It depends on the requirement.
if your messages are related with the one another . means 2nd message will only process when 1st one is successfull.
Then use EOIO.
and no dependency is there then use EO.
Naming convention is given is SAP library for sapxi.
For EOIO use like :- XBQO*
For EO use like :- XBTO*
2) how to process again this messsages in receiver system. (I am doing using SMQ2 but this metthod is not for production system).
Now if duplicate entries are there then delete all those messages first. and if it is going in Database then Delete the wrong and duplicate entries in the Tabel first.
Then restart the right messages. Goto SXMB_MONI then delete the duplicate messages.
Regards,
Sumit Gupta
Edited by: sumit gupta on Nov 12, 2009 1:30 PM
Edited by: sumit gupta on Nov 12, 2009 1:31 PM

Message cancelation in SXMB_MONI

Hello!
Messages in error can be canceled in SXMB_MONI to prevent reprocessing by the restart job.
Is there a way to find out who canceled a particular message?
The Message History in SXMB_MONI only shows when the message was canceled but not the user id which canceled it.
Regards, Tanja

Hi,
You can checkthe user who has cancelled the message in Sxmb_moni by changing the layout in moni itself.
Goto SXMB_MONI -->Click on Select Layout (a Button on extreme right above XML Messages) > Click on Select Layout> you will get a list on right as well as left > Choose User name at last from Left LIST of Layout parameters.> Now you can see USER NAME in SXMB_MONI message on same line at extreme last at right.
Thanks,
Manas

IDOC Message coming from R/3 system to XI , but waits in Qeue

<b>IDOC Message coming from R/3 system to XI , but waits in Qeue</b>
XI doesn't send the message FTP receiver.In XI sxmb_moni the "c" column contains green flags that mean "message scheduled on outbound side".
In smq1 It writes "SYSFAIL" means "Password logon no longer possible - too many faile"
But I use "anonymus" in FTP adapter. Which password is this, which component is related with this error.
How can I do?
thanks

Hi Cemil,
it may be that the FTP server where you want to send your output file does not accept anonymous connections.........so just get the username and password of that FTP server, which has access to do FTP to that machine, for doing ftp to that machine, then your output msg will be FTP to your target FTP server........
Thanks,
Rajeev Gupta

How to fill Request Message ID in SXMB_MONI

Hi,
I have Abap proxy inbound -outbound asynchronous communication between XI and ERP backend .
XI sends a kind of requests messages and the backend sends back messages with a kind of response.
In the Tc:SXMB_MONI I want to see the correlation between these two messages - for instance, to have an entry in column u201COriginal Message IDu201D or u201CRequest Message IDu201D, like it is made in synchronous communication.
I think I need to fill the message header (e.g. field Main/RefToMessageID) in the outbound proxy on the backend, but I donu2019t know how to do it. .
Thanks for your help,
Janos

Hi janos
Then i can suggest a way to meet this. There is no standard way to do it.
To get the message ID from the message you need to capture that in mapping.
This code should help you.
java.util.Map map = container.getTransformationParameters();
String msgid = (String) map.get ( StreamTransformationConstants.MESSAGE_ID);
return msgid;
Now Create a table either in Non SAP or SAP and do a lookup to write the values. I recommend create a Z table in XI and use RFC lookup to write values to it.
Now just write simple ABAP report to fetch these and give it to any one.
Moreover extend the report to get the values from SXMSMAST in XI to get payload attached to that Message ID.
Thanks
Gaurav

Capturing Application Error log from SXMB_Moni

Hi,
I wanted to capture the error information from Application error log from ECC sxmb_moni and forward that as email alert.
We have already alert configuration in place with alert category using standard variables. Was wondering if I have to capture application error log from sxmb_moni what would be steps involved. Please let me know if anybody has worked on this and appreciate your help on this.
Sample Error message from sxmb_moni of ECC system
MT_Fault
Error in Application System
Detailed Information
Process Order invalid
Thanks
Selvam
Edited by: Selvam_muthu on Jun 23, 2011 5:40 PM

Hi Selvam,
As the exception is raised in ECC system, alert cannot be trigger, alert will get trigger when there is a error in PI system. To raise a email, write additional code in ECC to trigger the e-mail with proper error content

No messages created from split mapping error .....

HI XI Friends..
In My XML to RFC scenario,,
i am doing message splitting withput BPM.
in message mapping ..i changed target message occurance to unbounded
and same i did in interface mapping also..
static test is OK..creating multiple target messages in static test.
in interface determination,using enhanced option i given interface mapping.
file is picking but in SXMB_MONI ...i am getting error like this
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>No messages created from split mapping</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No messages created from split mapping</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
please guide me..
regards
ram

Hi Ram,
Check these..
Split mapping created no messages
Message Split without BPM - Error
cheers,
Prashanth
P.S Please mark helpful answers

Message reprocess from SXMB_MONI

Similar Messages

Maybe you are looking for