Message restart in SXMB_MONI

Hi All,
I have certain messages in "No receiver Found" status in SXMB_MONI, which had occured because some receiver conditions were not there in Configured receivers of Receiver Determination. Now I have created those extra conditions and want to manually restart the message in SXMB_MONI but it throws alert" Message does not have restartable error status".
If I go in Configuration channel where I had missed my conditions there ewe have option as selected "If No receiver is found , Proceed as follows
Terminate message processing with error(Restart Possible)
In such case why does it now allow me to restart the message. How else can I restart the message in SXMB_MONI.
The error which is in SXMB_MONI is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_STOP</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to determine receiver. Message does not contain errors, but will be stopped</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Thanks in advance
Ravijeet

I have aroud 2000 messages and I can't manually reprocess the message in RWB.
Check if this blog helps you in restart:
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Carefully read c) Other Errors ---> Option 2
Regards,
Abhishek.

Similar Messages

Message scheduled in SXMB_MONI(Queue status is stoped)

Hi experts,
Here my scenario is Proxy to file. I am sending the 20 .. 30 ..messages at a time from ISU system using proxy to XI. In ISU sender system Under sxmb_moni some messages are failed with errors. after this all messages are in scheduled mode(this is not in XI). scheduled messages are not at all executing.. here i registered all queues.
Please give me the solution how to reprocess the messages.
thanks
Srinivas

hi ,
1) Here i am selected message processing mode EOIO. which one is good EO or EOIO for process the messages asynchronously. If i choose EOIO I have to give queue name right? What name i have to give?
It depends on the requirement.
if your messages are related with the one another . means 2nd message will only process when 1st one is successfull.
Then use EOIO.
and no dependency is there then use EO.
Naming convention is given is SAP library for sapxi.
For EOIO use like :- XBQO*
For EO use like :- XBTO*
2) how to process again this messsages in receiver system. (I am doing using SMQ2 but this metthod is not for production system).
Now if duplicate entries are there then delete all those messages first. and if it is going in Database then Delete the wrong and duplicate entries in the Tabel first.
Then restart the right messages. Goto SXMB_MONI then delete the duplicate messages.
Regards,
Sumit Gupta
Edited by: sumit gupta on Nov 12, 2009 1:30 PM
Edited by: sumit gupta on Nov 12, 2009 1:31 PM

Message cancelation in SXMB_MONI

Hello!
Messages in error can be canceled in SXMB_MONI to prevent reprocessing by the restart job.
Is there a way to find out who canceled a particular message?
The Message History in SXMB_MONI only shows when the message was canceled but not the user id which canceled it.
Regards, Tanja

Hi,
You can checkthe user who has cancelled the message in Sxmb_moni by changing the layout in moni itself.
Goto SXMB_MONI -->Click on Select Layout (a Button on extreme right above XML Messages) > Click on Select Layout> you will get a list on right as well as left > Choose User name at last from Left LIST of Layout parameters.> Now you can see USER NAME in SXMB_MONI message on same line at extreme last at right.
Thanks,
Manas

Issue with Archiving & Deletion of messages in PI ,SXMB_MONI messages

Hello experts
I am working on Archiving & Deletion of messages in PI ,SXMB_MONI, i have fallowed all the steps which are avialable in /people/deepak.shah/blog/2010/04/22/archiving-deletion-of-messages-in-pi--part-2, but the messages still there in SXMB_MONI.
please help me to resolve this issue.
regards
chandra

Hi Krish
i have fallowed steps like....
in SXMB_ADM
>>>step 1: Define the interface for archivng and retnetion period
>>>step2):Schedule Archive Jobs,
after this i have checked the in SM37 the jobs got sheduled and released after that it showing finished.
>>>step3):ARV_BC_XMB_WRP<date> (archiving, step 1)
ARV_BC_XMB_DEL<date> (archiving, step 2)
here i am getting message like "0 XML messages got archived".
"0 XML message for deleated".
I have doubt in SXMBPMAST table here when i check the status of interface , ITFACTION field is containing the value INIT and if I understood correctly it job deletes only those messages where ITFACTION is set to DEL.
We are actually trying to delete the messages avoiding archiving but what I am seeing is we cannot delete error messages and for them we must have to go through archiving. Please correct me if I am wrong.
Thanks
Chandra

MAPPING GENERIC (Split mapping created no messages) error is sxmb_moni

Hello,
We are having thousands of messages failing in sxmb_moni due to MAPPING GENERIC error. It also states that <i>Split mapping created no messages</i>. Where will I start my investiagtion? I already checked both ID and IR but I could hardly determine what causes this error.
Here is a part of the error message from the trace:
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 6FB317EF58B136D6BEAB6E567934CC40</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping A872F380930B11DAAB6EF47891374079</Trace>
<Trace level="1" type="T">Mapping-Object-Id:6FB317EF58B136D6BEAB6E567934CC40</Trace>
<Trace level="1" type="T">Mapping-SWCV:A872F380930B11DAAB6EF47891374079</Trace>
<Trace level="1" type="T">Mapping-Step:1</Trace>
<Trace level="1" type="T">Mapping-Type:JAVA</Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="3" type="T">Multi mapping required.</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_</Trace>
<Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="3" type="T">Using existing</Trace>
<Trace level="3" type="T">Executing Query: SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30</Trace>
<Trace level="1" type="T">SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30 successfully returned: E-HPC_PRODUCTS</Trace>
<Trace level="1" type="T">ret: :E-HPC_PRODUCTS</Trace>
<Trace level="2" type="T">noReceiverFound</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_ completed. (executeStep() of com.sap.xi.tf._GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_</Trace>
<Trace level="3" type="T">Message Type 1 Number of Messages 0</Trace>
<Trace level="3" type="T">Message Type 2 Number of Messages 0</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
Thanks in advance!

<Trace level="3" type="T">Using existing</Trace>
<Trace level="3" type="T">Executing Query: SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30</Trace>
<Trace level="1" type="T">SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30 successfully returned: E-HPC_PRODUCTS</Trace>
<Trace level="1" type="T">ret: :E-HPC_PRODUCTS</Trace>
<Trace level="2" type="T">noReceiverFound</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
You have used the Trace object to write some Trace in your User Defined Functions. Does this trace make sense in terms of your mapping logic to you?
Did you remove the <messages> tag from your source message?
Also, If you are using multimapping make sure that the mapping creates all the messages in the Target Side and that the Inbound adapter is neither Idoc nor HTTP.
Regards
Bhavesh

Missing message mapping in SXMB_MONI

Hi All,
I am doing a mapping from XI to 2 receivers CRM proxy and JMS adapter.
When I executed the whole process, I can see success flags in both XI MONI with 2 nodes one for receiver grouping and other for response. The request message mapping node is missing. When i checked CRM MONI for the same message, the inbound message payload is blank. What could be the reason for the missing message mapping IN sxmb_moni.
Thanks

Hi,
Are you copying the source xml from message test tab to trigger the scenario.
If so you need to remove <messages> <message> node from the input type.
Always the root of your input xml should be your message type name.
Regards,
P.Venkat

Messages Missing in sxmb_moni

Hi every one,
There are some messages missing in sxmb_moni? I have checked the queues: smq1, smq2
-Naveen.

Hi,
did you activate the trace?
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
BTw
are you sure those messages should be in the XI?
do you see your message in:
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
Regards,
michal

IMac27 reboots every few days with message "Restarted after error"

My iMac27 reboots every few days with message "Restarted after error". How do I find out what it is upset about so I can repair?

Visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Also, OS X- How to log a kernel panic and post a recent panic log (not a crash log.)

Message restart

Hello experts,
i am wondering at which point messages are getting reprocessed after encoutering a systemerror. At which point does the message restart?
I am having multiple messages on errors which failed due to a mapping issue. I solved this problem by using an extended receiver determination which only sets receiver if a certain precondition is fullfilled, if no receiver is determined, i just ignore it in receiver determination. Because this messages should never reach anybody!
But restarting the messages just leads to getting the mapping error again! Do failed messages only restart at the position they failed before?
For example:
Having mapping failures and restarting the messages just leads to restarting the adjusted mapping again, without the receiver determination step before?
Thanks in advance!
Kind regards,
Markus Schalk

Markus Schalk wrote:
> But restarting the messages just leads to getting the mapping error again! Do failed messages only restart at the position they failed before?
Yes. All other previous pipelines will not be executed.

Auto message restart job take long time to run

Dear all,
I have configre the auto message restart job in sdoe_bg_job_monitor
but it take long time to run.
i have execute the report i have find out that it is faching records from smmw_msg_hdr .
in the table present 67 laks records are there.
actually it is taking a lot of time while getting data from the table
is there any report or tcode for clearing data in the table.
I need ur valiuble help to resolve the issue.
Regards
lakshman balanagu

HI,
If you are using oracle database you may need to run table statistics report (RSOANARA) to update the index. The system admin should be able to this.
Regards,
Vikas
Edited by: Vikas Lamba on Aug 3, 2010 1:20 PM

Deleting messages from the sxmb_moni

Hi frnz
i want to delete messages from the sxmb_moni. i am trying to delete these from the sxmb_adm---->schedule delete jobs.
here i found 1> schedule delete job for xml messages
2>schedule delete jobs for history entries
i scheduled the time and executed the job. after executing the job i am getting the status finished. while seeing the job log here its showing 0 XML messages deleted.
so the job is running but the messages are not deleting.
can u tell whatu2019s the procedure to follow the schedule delete jobs.
i gone through some blogs and threads, but i found clearly how to schedule archive jobs but not how to schedule delete jobs clearly.
pls tel me whatu2019s the mistake happening.
Regards
Munna

thanks Sekhar, Ramesh and Suresh for the relies.
its a very good blog from u Sekhar.
i need some clarifications how to delete the messages. first i canceled the messages by running the program RSXMB_CANCEL_MESSAGES . all the messages now are in the manually canceled status.
now i want to archive the messages and delete the messages, right?
i am trying to archive the messages by scheduling the archive job.here i am giving the archive message program RSXMB_ARCHIVE_MESSAGES,but its asking the access key.
what i have to give here. i dont know the access key.
another question , i am able to see ITFACTION field in the SXMSPMAST table. i am not able to see the messages in this field.
how to delete the messages from the table SXMSPMAST. can i delete the field or not here?
please reply
Thanks Regards
Munna

Message reprocess from SXMB_MONI

Hi Friends,
We had a scenario like file sender to JDBC receiver and in Message mapping we read the file name and from file name we will take the country code with substring and map to target field.
Now the problem is: when message failed at PI, we are not able to restart the same from SXMB_MONI and also not able to reprocess from RTW because if we process from RTW, we will not get file name at runtime which fails at Mapping.
So please let me know how to reprocess the failed message from SXMB_MONI or some another options if have.
message is synchronous and QOS is EO. Mesage status at SXMB_MONI: system error-manual restart possible
Thanks in Advance.
Regards,SARAN

Mesage status at SXMB_MONI: system error-manual restart possible
why are you not able to restart the message from SXMB_MONI?
the message clearly says you can.

I have run disk utility- the drive is corrupted- I get the error message restart your computer holing down the Cmd

I have now tried every variant of key compbinations but I still get the grey lock icon with a box which won't accept my password.
When re-running disc utility all I get is the same error message

I ran the Disk Utility and got a message that it can't repair the disk. This happened after I did a restart Command and R. After trying the repair cycle I got a message "Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed - up files" I found myself stuck because I couldn't shut down the Disk Utility. Out of frustration and patience I turned the I-Mac off by pressing the start key, thinking it would restart my computer. I feel like a fool now! I started the computer up and all I got was a grey screen with a flashing file with a question mark inside the file icon which is blinking off and on. I tried attaching my Seagate hard drive with no luck. What can I do? Thank You!

Request Message mapping in SXMB_MONI for File - RFC - File without BPM

Hi ,
In my File-RFC-File scenario, the messages are processed successfully.
but when i look into the SXMB_MONI for File to RFC step, the records are present only till the Message split According to Receiver List and not able to see the records from Request Message mapping step onwards.it contains
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:Z_PI_LOTUSNOTES_UNIFORM xmlns:ns1="urn:sap-com:document:sap:rfc:functions" />
in my mapping for the receiver RFC i have not done the mapping for all the fields. few fields i have disabled. whether this could create a problem in message mapping. pls let me know what needs to be done.

Is it only for this scenario that the above display issue is occuring or is it for all scenarios?
If onlt a particular Pipeline steps are displayed then you can check what is the TRACE level set in SXMB_ADM --> Integration Engine Configuration --> and check if the TRACE parameter is set to at least 2 (max is 3 which will ensure that your DB will get full quickly)
For more information refer: /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
Regards,
Abhishek.

File to Abap Proxy Scenario : No message log in SXMB_MONI

I have a PI Scenario in which a FTP server is polled every 5 minutes, and when it receives any file, file is archieved and abap proxy is called. Few days back it was running perfectly fine. But For last couple of days I am facing strange error.
My File is archived but abap proxy isnot called, neither I get any message in SXMB_MONI.
any guesses what should I do?
Jawed Ali

Hi Jawed,
HOLD means you have given QoS as EOIO in sender channel and the first message got failed and hence all messages are waiting..
Check this thread
Re: PI 7.1 Messages stuck into the Queue of the Adapter Engine
Try resending the messages through runtime workbench->message monitoring->adapter engine
Regards
Suraj

Message restart in SXMB_MONI

Similar Messages

Maybe you are looking for