Message returns to unread status

I occassionally get a message that continues to show as unread even after I have read the message. If I open the message it will show as read for from a few seconds to a minute and then go back to showing as unread. I can delete the message, but that is not always desirable.

Try this -
When you device is POWERED ON, remove the battery for a minute, and then reinsert the battery. This make a reboot to your device which minor issues with the BlackBerry device.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

Automatically highlight the next message and remove the "unread" status

In my inbox on Ipad, when I swipe and delete a message or highlight the message and hit the delete icon in the upper right corner, it will automatically highlight the next message and remove the "unread" bullet next to the message. This is version 7.1. Is there a way tnot to have your messages marked as unread when you haven't read them yet?

You can hit the small flag icon and mark it as unread yourself.

Messages stuck in Holding status in Runtimeworkbench

Hi,
Some Messages are stuck in Runtime workbench of PI in Holding status,When I resend the messages they return to same status again.
The messages are sent on 15-5-2014.I could not find those messages either in SXMB_MONI or SMQ2.
Now how to resend the messages successfully.Appreciate your help in this.

Hi Gurudatta,
If it is EOIO then you can go the Messaging System and there you can find the message which is blocking the other queues. Check the first message and delete it
And go to runtime work bech ---Message Monitoring --Adapter Engine and filter Holding message and Resend/cancel the first holding message
If it is not successfull stop and start the recevier communication channel. This will work
Regards,
SK

QM-SD: Sales Return Inspection lot status Error

Hello Expert,
I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
Message no. VL171
The inspection type is 06 (Inspection for Returns from Customer).
The movement type is the 651.
I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
Please let me know what could be the reason for the error for goods issue for sales return?
Thanks in advance.
Pablo
Sales Return Inspection lot status Error

Dear Nunez
1) 06 inspection lot gets created when you create a delivery not when you do the GR.
2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
1) make use of movement type 653 instead of 651
2) activate 05 inspection in the material master. (deactivate 06)
3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
regards
gajesh

SD-QM: Sales Return Inspection lot status Error

Hello Expert,
I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
Message no. VL171
The inspection type is 06 (Inspection for Returns from Customer).
The movement type is the 651.
I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
Please let me know what could be the reason for the error for goods issue for sales return?
Thanks in advance.
Pablo
Sales Return Inspection lot status Error

Dear Nunez
1) 06 inspection lot gets created when you create a delivery not when you do the GR.
2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
1) make use of movement type 653 instead of 651
2) activate 05 inspection in the material master. (deactivate 06)
3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
regards
gajesh

Message no. 26269 : Status can only be set when all originals are stored

Hi,
While changing status in cv02n, i am getting the below message no-Message no. 26269 : Status can only be set when all originals are stored. I am not getting the message solution in google. please guide me how to come over from this message.
Regards,
Mastan.

Collegues! Have you any idea?
Found this - [recommendation|http://help.sap.com/saphelp_47x200/helpdata/en/0c/b98e3c90347b17e10000000a114084/content.htm] - how to, but there so simple scenario without details about standart functionality.
Check In
You can check in originals, which are saved in the local network, into a storage system. The following originals are indicated by the icon:
Originals that are to be checked in for the first time.
Originals that have already been checked in, and loaded into the local network for changing.
To do this start WebDocuments. Process the document info record in the change mode.
Select the original in the Originals dataset.
Choose Check In. The system determines the storage system based on the system settings, and checks in the original.
You return to the data sheet. The original application file is indicated by the Checked In icon.
Save the document.
Very simple, but not work, and no details. Castle icon are not locked. DELETE, CANCEL - work, but not CNANGE.
Maybe my storage system cannot determine the storage system? If it is right, so where can i maintain this option?

[svn:bz-trunk] 10570: Bug: BLZ-428 - pinging endpoint Returns a HTTP: Status 200 in ie8

Revision: 10570
Author:   [email protected]
Date:     2009-09-24 07:53:33 -0700 (Thu, 24 Sep 2009)
Log Message:
Bug: BLZ-428 - pinging endpoint Returns a HTTP: Status 200 in ie8
QA: Yes - please make sure IE8 works with AMF.
Doc: No
Details: AMF does not work all the time in IE8 due to some IE8 and/or Flash Player bug. Setting the Content-Type in HTTP responses to text seem to resolve the issue. We're adding a temporary solution to change the Content-Type when IE8 is being used. This is not on by default though, user has to opt-in with this configuration option in channel definiton:
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-428
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.java

Unable to connect to SQL Server : bad return code or status

When attempting to connect to a server running Windows Server 2008 R2 and SQL Server 2008 R2 the following error message is returned.
Error Connecting to Database
A SQLServer request resulted in a bad return code or status but no error message was returned.
The client is pointed to another similar server running Windows Server 2008 R2 and SQL Server 2008 R2, a connection can be made successfully. Looking at the registry both servers have the same version of MDAC 6.1.7601.17514.
UPDATE
The SQL Server Error Log records the following information.
Message
Length specified in network packet payload did not match number of bytes read; the connection has been closed. Please contact the vendor of the client library. [CLIENT: 10.1.30.106]
Message
Error: 17836, Severity: 20, State: 17.
It seems like the client is actually reaching the SQL Server but failing to login.

The version of MDAC on the server doesn't matter. It is the client version of MDAC/WDAC that is used. Do you know what SQL Server API the client application is using (i.e. ODBC, OLE DB, SqlClient, JDBC, etc)? You might try a simple connection
test from ODBC data source manager or script.
I think this may be error message from a Sybase client. That would explain a lot.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Read POP messages marked as unread

Shouldn't Mail know when a message retrieved from a POP server has been flagged by the server as read? I access the POP account from several different locations and don't want to read through messages I've already read at work. Eudora seemed to manage this fine....

I'm not sure how Eudora does this since the inbox mailbox for a POP account is not synchronized with the server.
New messages available and that remain at the incoming mail server for a POP account not yet downloaded by the email client being used to access the account will be downloaded. If another email client is used to access the same POP account, and messages downloaded by the other email client are read with that email client, the read/unread status for the messages with the email client used is not communicated or synchronized with the server.
This is a function and feature of an IMAP account, not a POP account.

Z10: IMAP Unread Status Not Synced

Read/Unread status of items on Blackberry are not synced to IMAP e-mail.
I have to marked messages as read on the phone and then again on my desktop in order to clear the notifications. I'm using IMAP for all devices/clients and have tried Synchronizing Mailboxes and restarting the mail client.
Gave up on BlackBerry and delisted all apps.

I just wiped the phone and tried again and the problem is pervasive.
Gave up on BlackBerry and delisted all apps.

SU DeploymentException - when to throw and when to return a failed status

When a SUManager's deploy method is invoked and the operation fails is it a matter of preference to throw a DeploymentException with a XML message containing the component-task-result like the ri-component examples do or to simply return a XML message containing the component-task-result with a status of failure for the operation?

The general rule is to have the SUM.deploy() method return an XML result/status string (as defined in section 6.9). This produces a structured result that is returned to the admin tool, allowing it to produce a detailed, human-friendly error message.
Alternatively a DeploymentException can be thrown. I am not aware of any circumstances where this must be used instead of the return value to indicate a deploy() failure, but if memory serves the RI team had identified some corner case where such an exception was considered necessary. If you wish, I can follow up with them to get some details.
Regardless of whether the SUM.deploy() returns a result/status with an ERROR result or if it throws an exception, the DeploymentServiceMBean supplied by the JBI implementation must return a result/status string for the service assembly deployment, throwing an exception only if the entire SA fails to deploy. A result/status string produced from a SUM.deploy DeploymentException won't contain as much information as a result/status string.

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015. SQL 2012 SP1

Hi,
Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'.
Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
is not a possible owner of the resource.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
BUTTONS:
OK
I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
application SQL Server SG1DB. Could not move the resource to available storage. An error occured
while moving the resource BCK_SG1DB to the clustered service or application Available Storage
Any ideas why it failed or how could I delete the SQL server instance from Clauster?
Thx

Hello,
Please read the following resource.
https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How can I download and read a SWF file on IPad 2? The message returned is that Safari cannot download that file

How can I download and read a SWF file on IPad 2? The message returned is that Safari cannot download that file

SWF files are flash files, which are not supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/
If you want to play the file then the iSwifter or Skyfire browser apps might work (they don't work on all flash sites) but you won't be able to download it

ABAP program to Cancel messages in Scheduled/Recorded status?

Hi,
Thanks for reading my post...
Can anyone tell me whether there is an ABAP program available (or a variant) that will Cancel messages that are in Scheduled (or Recorded) status?
Messages to be sent from ECC to PI were not sent and are left in Recorded status in ECC. I cannot find the documentation to explain what this status is, but I'm presuming that it's similar to the Scheduled status in PI (though there's not much documentation about that either - for example, what's the difference between the 'green flag' Scheduled and the 'green flag' Released for Processing (WS)? ). {Note to SAP: Could we have a state transition diagram please? Simple, concise and effective.}
Anyway, the 'tick-pencil' button in SXMB_MONI (aka. CTRL-F8) can be used to cancel the messages in Scheduled/Recorded status. But I'm looking for an ABAP program to do this. The documentation seems to 'suggest' that this button might do the same thing as the ABAP program RSXMB_CANCEL_MESSAGES. However, this ABAP program does not cancel messages in Scheduled status (only the messages in Error), whereas the SXMB_MONI CTRL-F8 'tick-pencil' will cancel messages in Scheduled status if they are selected.
Is there another ABAP program available to cancel messages in Scheduled status - or is it possible to create a variant of RSXMB_CANCEL_MESSAGES that will do this? (I'm not an ABAP programmer and I've never created a variant, but looking at the code, it seemed it might be possible to get the program to read messages in Scheduled status rather than Error status.)
Many thanks for any help.
Mark

Messages are in scheduled status because they still in the queue in either 'READY' status or 'EXECUTING' status (see SMQ1/SMQ2). You don't want to automatically cancel messages that are in scheduled status because that means you are also going to cancel good messages. However, in some cases, you may want to cancel such messages especially when the message in the queue has been in 'Executing' status for long time (happens in case of long running mapping program or dropped connection etc). Such cases warrant manual intervention and hence the behavior as noted by you.
If you can tell me why exactly you want to cancel messages that are in scheduled status, I can help you more.
Thanks
KK

Message returns to unread status

Similar Messages

Maybe you are looking for