Message rule for sent messages

Hi,
I have successfully converted and repaired all my Outlook Express mail to Apple Mail 3.5 with Emailchemy. I have aprox 450 folders and 5000 mails. I have used more than 200 rules to organize my incoming messages but I cannot find the way to store "sent messages" in the right folder. I don´t want to store my replies in sent messages. I need my reply inside the folder where the message rule previously stored my incoming message. is it possible?
Warmest regards,

There are several possibilities.
The simplest of course is not to bother. When you reply to a message, Mail puts a link (a little anti-clockwise curved arrow) in the status column of the original message, and clicking on that brings up the reply.
You could set up Smart mailboxes. This would leave the replies in the Sent mailbox, but also make them visible in the appropriate Smart box. The rules for the various Smart boxes would have to be designed to pick up both original messages and replies.
If you really must get the replies into the same folder as the originals, you will need some sort of Applescript. You could for example have a Mail rule, fired by any incoming message, which runs an script to look at all messages in the Sent box, and identifies the box to move each to. How is your scripting?
Another script-based possibility is to have a script to generate the replies. Since it would know which box it was working from, it would know which box to put the reply in, and it would require less maintenance (as your requirements change) than the previous.
Perhaps the best solution for you, requiring the least effort, would be to use the Mail option to automatically CC (or BCC) yourself. The resulting copy is an incoming message - so your 200 rules should pick it up and move it to the appropriate mail box.
AK

Similar Messages

  • TS3276 Lost messages in the sent messages folder?

    Has anyone lost mobileme (icloud) messages in the sent messages folder?

    FYI, my husbands email on the same iPad does not do this.  [email protected]

  • [svn:bz-trunk] 24018: Updates to the message to send across only required message attributes for small message format

    Revision: 24018
    Revision: 24018
    Author:   [email protected]
    Date:     2012-07-11 02:23:31 -0700 (Wed, 11 Jul 2012)
    Log Message:
    Updates to the message to send across only required message attributes for small message format
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/messages/AbstractMessage.java
        blazeds/trunk/modules/core/src/flex/messaging/messages/AsyncMessage.java
        blazeds/trunk/modules/core/src/flex/messaging/messages/CommandMessage.java
        blazeds/trunk/modules/core/src/flex/messaging/messages/ErrorMessage.java
        blazeds/trunk/modules/core/src/flex/messaging/messages/Message.java
        blazeds/trunk/modules/core/src/flex/messaging/messages/RemotingMessage.java

    Im not sure what's the problem, but let's try to figure it out. First of all explain what do you mean by "it works very bad". Doest it hang, is it slow, is quality unacceptable.
    Myself, I have one problem with JMF. When i run video & audio on my Centrino 1.4 GHz, it just takes 100% CPU! And of course quality becomes degraded. Check if you have something like this.

  • Create Transport rule for restrict message size and send a rejected message CC: to Administrator

    I want to create a Exchange Transport rule for message size restriction (10 MB) when message size is exceed to 10 MB it rejected by the Exchange server and
    also rejected message CC: to Administrator. I also create it but unable to configure rejected message CC: to Administrator. Thanks.
    Babu

    Hi Babu,
    I have some tests in my environment using Exchange 2013, you can create a transport rule such as follows to achieve your goal.
    Hope this can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact 
    [email protected]
    Amy Wang
    TechNet Community Support

  • Making Groups in messaging and recent contacts list for sent messages !

    I can't find any option for making groups for sending messages or getting list of recently sent messages to contacts. Every time I ve to scroll for contcts for multiple messaging or searching for contacts !
    Is there any option for that ? Pls do let me know if so.
    Regards.

    Hi Agriman,
    Welcome to BlackBerry Support Community Forums.
    Here's how to create groups in your BlackBerry Address Book. http://bit.ly/gdhrVa
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Mail rule for flagged messages

    Does anyone know a way I could set up a rule so when I flag a read message it moves to a particular folder (mailbox)? Like, I get a "statement to view" message from a credit card company, but I don't have time to see it now, so I flag it and it moves to a folder called "Things to do later", or whatever...

    Yeah, just create a smart mailbox looking for flagged messages.

  • Clipboard huge mistake MacBook Pro - saved a critical message to clipboard, sent message, site had error, copied "contact us" address and oh, no, no, no my Message!  Please tell me there is a way to find it somewhere in this computer.

    Hi!  I am a recovering from  chemo patient -- lots of pain and can only sit for short periods as well as off and on brain fog yet I am alive and this is good.  It took me 3 hours today to write a very important concise yet detailed and to the point message to a doc today using the hospital patient portal messaging system.  I felt fantastic that I did it and I got it done and I did it well.   That was a big deal for me at this point in healing.  Just for any "in case" situation I did a "save" (to the clipboard) of my message before pushing  "Send".  I received the message: "Thank you!  Your message has been sent."  Then I called the doc office to let them know and while the phone was ringing I noiticed "where's the message?" and "Oh, no, no, no, it's not here!"  I hung up.  I looked under Help, read, decided to do "contact us" using my yahoo acct. instead of mail, I copied the address.  Then it hit me -- Oh no, no, no, I did not just overwrite 3 hours of off and on writing of a very important message with a puny email address, did I?! 
    I searched using Finder, via the Library, via Clipboard, via this and via that -- the only thing I saw that was at the same time I had "saved" the text to the clipboard was under cache.db,  and under type it said a document. I have no idea what that is or how to open it and when I selected it there was the message to go to the APP store or use an existing program/application and I have no idea what to chose.  I don't even know if that might be what I saved to the clipboard before I made my great faux pas.
    Could anyone please help me?  Am I looking in the right place?  Is there a right place? 
    When I do a Finder search for Clipboard the last entry was earlier on the 16th.  I did this on the 17th.  Under cache under library is the only matching time.
    I don't think I have it in me to rewrite (let alone remember) that entire letter (message) .
    I will be ever so grateful for advice, for how-to; oh please, there must be a how-to -- those words didn't just disappear into non-existance, right?
    Thank you for your time, for reading all of this and for any assistance. 
    So sincerely,
    Melinda

    Hi adam26, 
    Welcome to the Sony Community! 
    We certainly empathize with your frustration and we apologize for the inconvenience caused. Please check your other thread here, we saw someone from our customer relation department already responded to your inquiry. Again, we sincerely hope to seek your kind understanding on this matter. 
    Regards, 
    Dave 

  • Problems with iPhone messaging - received messages showing as sent messages and messages sent to one family member gets received by other family members.

    AT&T family plan - 4 iPhones in use by family members (4s, 4g, and two 3g's).  Weird things happen when we text message:
    1.   Sometimes, received messages look like they are sent messages - and no alert is sounded.   The conversation looks like you are talking to yourself.   Sometimes it happens to both parties in a text conversation, sometimes it only happens to one party.   Deleting the message entirely and starting over from scratch sometimes fixes the problems and sometimes doesn't fix the problem.  Once this phenomenon starts in a conversation it is almost impossible to get it to stop.  
    2.     Sometimes text messages to a specific family member get replicated to other family members as if in a group conversation - but group is turned off.   This happens sporadically but it happens.   Quite embarassing when husband and wife are sending private messages then suddenly the kids see the message on their iPhones!   Can't figure out why this happens or what makes it happen, but happens a lot!!!
    Has anyone had these problems or knows how to fix them?

    Be specific.
    Everyone?  or Every Device?
    If every device, does that mean you can no longer share apps?
    KiltedTim wrote:
    You have configured multiple devices to use the same AppleID for iMessage.
    Don't do that. iMessage is designed to sync messages between all devices configured with the same Apple ID.
    Everyone should have their own Apple ID. They were never designed to be shared.

  • Message Tracking for Rejected Messages

    We are using Exchange 2013, trying to use message tracking to determine if a message that was sent to us was rejected, I can run the messagetracking powershell command and I get reslults. would there be a "reject" event id for these messages?
    Thanks
    Pat

    Hi ,
    Below command will be used on the exchange management shell to have a grid-view on the output.
    Get-TransportService | Get-MessageTrackingLog -recipients "[email protected]" -ResultSize unlimited -MessageSubject "test" -eventid "fail" | Select-Object eventid,sender,timestamp,@{Name="Recipients";Expression={$_.recipients}},@{Name="RecipientStatus";Expression={$_.recipientstatus}},messagesubject
    | Out-GridView
    (or)
    Below command will be used on the exchange management shell to have the output on the csv file.
    Get-TransportService | Get-MessageTrackingLog -recipients "[email protected]" -ResultSize unlimited -MessageSubject "test" -eventid "fail" | Select-Object eventid,sender,timestamp,@{Name="Recipients";Expression={$_.recipients}},@{Name="RecipientStatus";Expression={$_.recipientstatus}},messagesubject
    | Export-csv c:\nithya.csv
    Reference
    Link for message tracking : http://exchangeserverpro.com/exchange-2010-message-tracking-log-search-powershell/
    Thanks & Regards S.Nithyanandham

  • Verizon Messages web app sent messages not showing up on phone app

    When I send a message from the Verizon Messages website on my pc the sent message does not sync with my phone (Samsung GS4).  I just started using this a few days ago, so it is the latest version.  Sent and received messages from my phone show up on my phone and one the website, and sent and received from the website show up on the website, but sent messages from the website don't show up on my phone.  Any ideas?

        nrkpt14,
    Oh no, I am sorry to hear you are not seeing the messages sent from the web on your phone. Are you looking for the messages on the actual Verizon Messages app? Is the phone properly setup?
    KarenC_VZW
    Follow us on Twitter @VZWSupport

  • Modify the message type for the Message no. CK239

    Hi,
    I would like to change the message type E to W for the message CK239.
    Is it possible?
    Thanks.
    Jean-Marc

    Hi,
    yep, agree with Eli. Please check this [thread|Re: T-code SE91 queries ??; on the issue of changing messages.
    Rgds
    Karl

  • Is it possible to disable New Message sound for SPAM messages?

    I inherited a role email account which receives an incredible amount of spam. Mail's SPAM filters do a good job or routing these messages to the SPAM box and keeping them out of my inbox, but I still receive a "New Message" sound notification every time a new SPAM message arrives. Is it possible to disable the "New Message" sound alert for SPAM messages while still receiving the alert for new messages that arrive in my inbox?
    Thanks,
    jason

    Try this:
    Go into Preferences -> General and uncheck the box that says "Play sounds for other mail actions".
    I'm not sure if it will work since that's really still "new" mail, but it might be worth trying.

  • Message Status of Sent Messages Is Opened

    I have a an intermittent problem when I send messages.  Occasionally when I send a message from Outlook, the sent message synchronizes with my BB with a Message Status of "Openened".  The majority of the time, when I send a message from Outlook, it synchronizes with my BB with a Message Status of "Sent".  This seems to happen a lot when I am working in Offline mode in Outlook and then connect at a later time.
    The message status of "Sent" causes a problem becuase all of those messages show up in my Inbox and are not hidden.  It is like the old days again!
    Anyone have any ideas on how to fix this or how to change the message status of an "Opened" message to "Sent"?

    Unfortunately no.  No responses to my post and I haven't figured any way to avoid it yet.  I just set up a separate folder to file them in whenever it happens.

  • Add message preview for unread messages

    Is there a way in the main message inbox all unread messages can display a short preview (Outlook has this option)?
    I don't mean displaying a preview pane for a single highlighted message. I want a short message preview that displays in the Inbox for each individual unread message.

    Thanks for the note, Jeffrey and trust me when I say I'm a die-hard Apple believer.  But, at work I support Windows machines and Outlook has views to show only unread messages.  As soon as a messages is read and we move on to the next messages, the read message drops out of the list.  This is what I'm look for so that I can apply it to the few Macs I also support at work.
    What Apple's Mail gives us is good, but what we were hoping was to have the smart mailbox work the same way that Outlook's feature does.  However, I still much prefer working with Mail rather than with Outlook.  So, we will adjust.  
    Thanks again.

  • PI 7.1 SOAP Adapter - Message Payload for Failed Messages - Where to find

    We are exposing a webservice through SAP PI.  Occassionaly we have customers calling our webservice and some failure occurs.  The error is usually the way that the customer is calling the webservice (missing elements, misnamed tags, bad content in the WS payload..).  Generally in these cases we can see the error in communication channel monitoring. 
    Here is an example:
    12/12/11 4:39:07 PM   com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: cvc-complex-type.2.4.b: The content of element 'SupplierInvoice' is not complete. One of '{"":Invoice}' is expected. at line 1, column 227
      12/12/11 4:39:06 PM   request received for a channel
    I understand the issue, but it would be extremely helpful to have the full SOAP Envelope and Payload of a request when it fails.  The communication channel will show a SUCESSFUL message payload with a link to it.  But it does not show a failed one.
    Where can I find the FAILED payload that accompanies this message?  These failures occurs before any mapping or being seen in RTWB Adapter Engine message monitoring...  I did some searching around, but did not find anything offhand.  I would greatly appreciate any pointers from anyone who has crossed this bridge.

    Hi,
    When the web service is being called by external application, the first point of contact would be the sender communication channel which converts the SOAP message into XML message and pass to integration engine ( In case of success )
    But if the web service call fails due to WSDL validation, Authentication issue, Bad content, invalid content type, you would not see the payload in the sender communication channel or in Adapter engine. You can just see error message in the sender communication channel . I have experienced this many times and i always ask the web service team to provide the SOAP message for validation/investigation purpose.

Maybe you are looking for

  • BPM and Flat File

    Hi to all. I'm a new entry in Netweaver BPM technology. I need to send via BPM a file from a sender system to a target one. The file has to be delivered as-is without mapping. In ESR I prepared all service interfaces, outbound, inbound and abstract a

  • Best way to set up Playlists...

    I was wondering if anyone had a suggestion on the best way to set up Playlists? When I buy a CD, should I create a new playlist and call it "CD Name - Artist Name"? Or should it just be the 'CD Name" or are playlists not even needed and I just sort t

  • System requirements for CS6

    Have a look at the new system requirements page: http://www.adobe.com/products/premiere/tech-specs.html In the past, a legitimate criticism of the system requirements on the box (and on that page) was that they were just the bare minimum for running

  • My homepage is reset every time I start

    I set my homepage according to your instructions but every time I start FF it is lost.

  • Issue Installing DPM 2012R2 UR2

    I'm having issues installing the DPM 2012 R2 UR2 re-release and I wanted to share my experience.  When I first attempted to install the update last week, it failed.  Shame on me, I didn't make a backup of the DPM database before the upgrade and DPM w