Message.saver is not working under 10.6 - anybody know of an alternative?

Message.saver 1.5.2 (http://www.apple.com/downloads/macosx/icons_screensavers/message.html ) is not working under 10.6. It is a screensaver that allows you to put a text on the screen as the saver kicks in. IMHO a excellent piece of software that worked fine under 10.5 but not under 10.6.
Does anybody know if there is something like it? and that works under 10.6?
Thanks.

Hi
i have the same messages on 10.6.4 and with the sonic xx170:
28.06.10 11:39:04 racoon[489] IKE Packet: transmit success. (Phase2 Retransmit).
28.06.10 11:39:07 racoon[489] IKE Packet: transmit success. (Phase2 Retransmit).
28.06.10 11:39:08 racoon[489] IKE Packet: receive success. (Information message).
28.06.10 11:39:10 pppd[488] IPSec connection failed
28.06.10 11:39:10 racoon[489] IKE Packet: transmit success. (Information message).
28.06.10 11:39:10 racoon[489] IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA).
any ideas?
waiting on 10.6.5, 10.6.6 ....?
regards, Arthur

Similar Messages

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

[svn:cairngorm3:] 21174: Landmark does not work under complex situations

Revision: 21174
Revision: 21174
Author:   [email protected]
Date:     2011-04-29 11:21:00 -0700 (Fri, 29 Apr 2011)
Log Message:
Landmark does not work under complex situations
https://bugs.adobe.com/jira/browse/CGM-39
Ticket Links:
    http://bugs.adobe.com/jira/browse/CGM-39
Modified Paths:
    cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/core/EnterAndExi tInvoker.as
    cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/waypoint/Waypoin tHandler.as

Hi John,
1) I like that the new model adds parameterization. It's cleaner than pulling in parameters from pre-set variables. However, the given example didn't actually make much use of it. The only non-constant parameter multiply-used in the example is the "table" variable. Seems like a lot of work for not a lot of gain, at least in this case?
2) I am cautious that this new template/model condenses the paradigm sooo much, that it is no longer clear where XPath is involved vs straight constant tag names. Yes, Adobe's example is overly-expanded but that's common in code meant to be a demonstration.
3) I also am cautious that the example intermingles direct node creation into the XPath search/processing chain. I've learned to be VERY careful with this. It only can work when the changes made do not interfere with the rule processing. In my model, I simply avoid it completely (by not making node-position or node-add/remove/move changes until after tree parsing is complete.) This will always be a safe model.
Bottom line: while I very much appreciate the parameterization and lintability (is that a word? Sure makes sense to me )... I think I would still define each rule separately rather than bring them all together as an inline array in the rule processing call. To me it seems sooo condensed that the XPath meaning can become lost. (Would someone recognize that //para/section-head is actually an XPath statement that could (in another situation) be //para/* or //para/following-siblings::* ... while some of the other strings are exact-match tag names?)
I realize this is all a matter of style... my preference: clarity for the future reader, particularly when the future reader is me a year later who forgot what all those parameters and embedded methods were all about ...
Blessings,
Pete

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Dreamweaver CS4 not working under MacOS 10.9

on starting DW CS4 it asks for Java Runtime engine 6, but Mavericks has Java v.7 installed. Since Java 6 was part of the OS of previous systems, I cannot install it seperately, besides it would probably cause conflicts with OS 10.9. Do I have to trash my DW, or is there a workaround.
Thanx

If I follow click the instal button on
I get the progress bar for about 1 sec and then the message about a supposed
network problem
which is unreal, since my network works perfectly for any other task and I
had even tried disabling the firewall and little snitch. Things are still
not working
Von: Jon Fritz II <[email protected]>
Antworten an: <[email protected]>
Datum: Montag, 25. November 2013 18:34
An: RoWo <[email protected]>
Betreff: Dreamweaver CS4 not working under
MacOS 10.9
Re: Dreamweaver CS4 not working under MacOS 10.9
created by Jon Fritz II <http://forums.adobe.com/people/JonFritzII> in
Dreamweaver support forum - View the full discussion
<http://forums.adobe.com/message/5872889#5872889>
This has been discussed a lot here, you need to install Java 6.
http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.ht ml
<http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html>
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/5872889#5872889
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/5872889#5872889 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/5872889#5872889. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Dreamweaver support forum at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=2240> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/thread/416458?tstart=0.

ISight not working under my account

Hi
Suddenly I've got iSight camera not working under my main Mac OS X account. PhotoBooth, Skype, iChat does not recognize it. They state that camera is not connected.
I've tried another account and it worked fine. But all the docs and setting are on my main account, so it's better not to delete it.
Since hardware works ok. I wonder how can I fix this issue under my account?

HARDWARRIOR wrote:
Hi
Suddenly I've got iSight camera not working under my main Mac OS X account. PhotoBooth, Skype, iChat does not recognize it. They state that camera is not connected.
I've tried another account and it worked fine. But all the docs and setting are on my main account, so it's better not to delete it.
Since hardware works ok. I wonder how can I fix this issue under my account?
See if anything from this recent topic helps you:
http://discussions.apple.com/message.jspa?messageID=12870386
EZ Jim
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

Why is my text messaging app is not working at all, is a blank screen? Help!!!

My text messaging app is not working at all is a blank screen when I open it! Help!!!

Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

The video out is NOT WORKING under 10.5.2

*APPLE please read this;*
The video out on the MacBook Pro is NOT WORKING under 10.5.2, or precisely is working with a possibility of 10%! Monitors doesn't find signal in, or when they find it, the image is unstable with green shadows.
_I tried 28 external monitor in a store and only ONE was working normally!_ I tried with all the cables combinations (DVI->DVI or DVI->ANALOG, with several different brand cables).
Before the 10.5 update, I didn't have any problem with external Monitor.
The point is that I have installed in the same computer (MAC BOOK PRO) also WINDOWS VISTA, and all the monitors that are not working with MAC OS are working perfectly under VISTA system.
I made a long research online and I found out that thousands of users have the same problem, but no one receive an answer from APPLE from several months!
This is not the only problem that I have under MAC OS 10.5, but them, are other topics.
_Please at least resolve this MAJOR problem that I and thousands of other users have with video out._
Thank you.
Leonardo Corbucci Zanobi
F I R S T A K E - STUDIOS
www.firstake.net

Video out under 10.5.2 works fine for me and for a colleague of mine with a more recent MacBook Pro. I'd wager it's a problem with your Leopard install, not a universal one.
Also, FYI, Apple doesn't read these forums; they're just for user-to-user help. If you want to leave MacBook Pro feedback for Apple, do so here:
http://www.apple.com/feedback/macbookpro.html
But again, I do not believe yours is a universal issue. We'll be happy to help troubleshoot though. What do you mean the image is "unstable"? Could you take a digital photograph of the external monitor's screen and upload it somewhere?

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit
Anyone had successs in this or another Bluetooth Keyboard after a bit of a struggle? What did you do to get it working? When I Add Device in Bluetooth it sees the keyboard but enlessly scans for it when I try to select and connect. The Rocketfish Bluetooth mouse worked just fine.

My friend, i have both, the bluetooth mouse and keyboard here that your talking about. and the keyboard was a struggle to pair with the windows 7 64 bit.... i think i spent 2 days working with it. and i didnt try anything special, i just kept trying to pair
it, and unplugging the dongle and working with it... and after a while. it worked... Lately though, i have been looking into getting a wired mouse and keyboard becuase of the delays and sleep time i have with my current keyboard(rocketfish). supposidly there
is a way around the delays but it disables all the options on your keyboard. IE the media buttons, and web browsing features. and my mouse keeps dieing off too....
Also, after researching these products more, i found that alot of people experienced similar problems with them, Being delays and mouse failure. Even with fresh batteries and all. The products werent meant to be used long term(2-3 years) for extensive use...
I dont know about you but i thinki paid 100 bucks for the pair so thats only 25 bucks a year... Which is kinda silly considering i coulda got a better one that wont cough up on me.
If anyone reading this finds a good wireless keyboard that doesnt delay, and a mouth that doesnt delay...(my biggest concern). Please mention it. i am very interested in.

My text messaging app is not working PLEASE HELP!!!

My text messaging app is not working at all is a blank screen when I open it! Help!!!

No its a well known bug with iphones caused by their over complication of things and their complacency that their users will buy the phones on looks alone irrespective of its basic functionality.
Suggestion 1 - The most common suggested solution seems to be: iMessage needs switched off on all your devices and switched back on after a rest. I found that this did NOT work.
Suggestion 2 - Having a Wi Fi Signal seems to confuse iMessage to send an SMS as a text or as an iMessage. Turn off WiFi on your phone and manually send as text message. Slow, I lnow!!
Suggestion 3 - Move away from any wifi source ie out of range.
Suggestion 4 - Send an email, or a letter. Its more personal!!
20 Minutes later - still not sent 2 short texts.
Apple are very complacent and disdainful of their user community. Not what Id expect but this is a global corporation with the same business ethics as an Oil company or a car company. Profit not function.

I have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks

i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks

If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Tomcat 4.1.x not working under JDK 1.2.2

We are trying to test our web application on all versions of JDK starting from 1.2.2. We use Tomcat as the servlet engine and after upgrading from Tomcat 3.2.x to 4.1.24 (we've tried 4.1.18 as well) we have noticed that the new Tomcat does not start under JDK 1.2.2, see command line output below. We've tried on several machines and it fails with the same Exception. Has anyone tried running Tomcat 4.x on JDK 1.2.x? We find it hard to believe that a product like Tomcat would fail to support JDK 1.2, so any information would be appreciated.
C:\Java\jakarta-tomcat-4.1.24\bin>catalina.bat run
Using CATALINA_BASE: ..
Using CATALINA_HOME: ..
Using CATALINA_TMPDIR: ..\temp
Using JAVA_HOME: c:\java\jdk1.2
Bootstrap: Class loader creation threw exception
java.lang.IllegalMonitorStateException: current thread not owner
at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java, Compiled Code)
at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java, Compiled Code)
at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java, Compiled Code)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java, Compiled Code)

I had the same problem.
No Tomcat 4.1.x is not working under JDK1.2.2.
It has something to do with a difference in byte code of the classes between jdk1.2.2 and jdk 1.4.
I am running now on J2SDK1.4.1_03 and have no problems any more

Message.saver is not working under 10.6 - anybody know of an alternative?

Similar Messages

Maybe you are looking for